HS091 Series Assemblies • 50 amp AC output @ 40°C • Single Channel output • 4 to 32 VDC input control voltage PRODUCT SELECTION Description 4-32 VDC Control 50A 50A HS091-H12WD4850 HS091-H12WD4890 OUTPUT SPECIFICATIONS (1) Description Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] Maximum Load Current @ 40°C [Arms] Minimum Load Current [Arms] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) Maximum 1 Cycle Surge Current (50/60 Hz) [Apk] Maximum I²t for Fusing (50/60 Hz) [A² sec] Maximum On-State Voltage Drop @ Rated Current [Vpk] Maximum Wire Size (solid/strand) [AWG/ IECmm²] Load Terminal Screw Torque Range (min-max) in lbs/Nm HS091-H12WD4850 HS091-H12WD4890 48-660 1200 50 0.15 1 500 597/625 1779/1621 1.6 2 x 8/8.4 15-20/1.69-2.26 INPUT SPECIFICATIONS (1) Description Control Voltage Range Minimum Turn-On Voltage Minimum Turn-Off Voltage Maximum Input Current Nominal Input Impeadance Maximum Turn-On Time [msec] Maximum Turn-Off Time [msec] Load Terminal Screw Torque Range (min-max) in lbs/Nm LED Status Indicator Parameters 4-32 VDC 4.0 VDC 1.0 VDC 15 mA @ 32 VDC See Note 3 1/2 Cycle 1/2 Cycle 8-10/0.9-1.1 No GENERAL SPECIFICATIONS Description Dielectric Strength, Input/Output/Base (50/60Hz) Dielectric Strength, Input/Output (50/60Hz) Minimum Insulation Resistance (@ 500 V DC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Encapsulation Thermal pad installed GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) Input circuitry for DC control version incorporates active current limiter Parameters 4000 Vrms 4000 Vrms 109 Ohm 8 pF -40 to 80°C -40 to 125°C 1.37 lb (624g) Themally Conductive Epoxy Yes 48-660 1200 50 0.15 1 500 1145/1200 6560/5976 1.6 2 x 8/8.4 15-20/1.69-2.26 MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 (SSR Only) Rev. 082812 ANNEX - ENVIROMENTAL INFORMATION