LCD and Camera EMI Filter Array with ESD Protection CM1630 Features Product Description • The CM1630 is a family of pi-style EMI filter arrays with ESD protection, which integrates four, six and eight filters (C-R-C) in small form factor UDFN 0.40mm pitch packages. The CM1630 has component values of 8.5pF-100Ω-8.5pF per channel. The CM1630 has a cut-off frequency of 200MHz and can be used in applications with data rates up to 80Mbps. The parts include ESD diodes on every pin, which provide a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD protection diodes safely dissipate ESD strikes of ±15kV, well beyond the maximum requirement of the IEC61000-4-2 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. • • • • • • • • Four, six and eight channels of EMI filtering with integrated ESD protection Pi-style EMI filters in a capacitor-resistorcapacitor (C-R-C) network ±15kV ESD protection on each channel (IEC 61000-4-2 Level 4, contact discharge) ±30kV ESD protection on each channel (HBM) Greater than 25dB attenuation (typical) at 1 GHz UDFN package with 0.40mm lead pitch: • 4-ch. = 8-lead UDFN • 6-ch. = 12-lead UDFN • 8-ch. = 16-lead UDFN Tiny UDFN package size: • 8-lead: 1.7mm x 1.35mm x 0.5mm • 12-lead: 2.5mm x 1.35mm x 0.5mm • 16-lead: 3.3mm x 1.35mm x 0.5mm Increased robustness against vertical impacts during manufacturing process Lead-free version available Applications • • • • • • LCD and Camera data lines in mobile handsets I/O port protection for mobile handsets, notebook computers, PDAs etc. EMI filtering for data ports in cell phones, PDAs or notebook computers. Wireless handsets Handheld PCs/PDAs LCD and camera modules These devices are particularly well-suited for portable electronics (e.g. wireless handsets, PDAs, notebook computers) because of their small package and easy-to-use pin assignments. In particular, the CM1630 is ideal for EMI filtering and protecting data and control lines for the I/O data ports, LCD display and camera interface in mobile handsets. The CM1630 is housed in space-saving, low-profile 8-, 12- and 16-lead UDFN packages with a 0.4mm pitch and is available with lead-free finishing. This new small UDFN package provides up to 42% board space savings vs. the 0.50mm pitch UDFN packages. ©2010 SCILLC. All rights reserved. May 2010 – Rev. 2 Publication Order Number: CM1630/D CM1630 Electrical Schematic 1 of 4, 6 or 8 EMI/RFI Filter Channels with Integrated ESD Protection Rev.2 | Page 2 of 18 | www.onsemi.com CM1630 PIN DESCRIPTIONS DEVICE PIN(s) DEVICE PIN(s) -04 -06 -08 NAME 1 1 1 FILTER1 2 2 2 3 3 4 -04 -06 -08 NAME Filter + ESD Channel 1 8 12 16 FILTER1 Filter + ESD Channel 1 FILTER2 Filter + ESD Channel 2 7 11 15 FILTER2 Filter + ESD Channel 2 3 FILTER3 Filter + ESD Channel 3 6 10 14 FILTER3 Filter + ESD Channel 3 4 4 FILTER4 Filter + ESD Channel 4 5 9 13 FILTER4 Filter + ESD Channel 4 5 5 FILTER5 Filter + ESD Channel 5 8 12 FILTER5 Filter + ESD Channel 5 6 6 FILTER6 Filter + ESD Channel 6 7 11 FILTER6 Filter + ESD Channel 6 7 FILTER7 Filter + ESD Channel 7 10 FILTER7 Filter + ESD Channel 7 8 FILTER8 Filter + ESD Channel 8 9 FILTER8 Filter + ESD Channel 8 GND PAD GND DESCRIPTION DESCRIPTION Device Ground Ordering Information PART NUMBERING INFORMATION Lead-free Finish Pins Package Ordering Part Number1 Part Marking 8 UDFN-8 CM1630-04DE TE 12 UDFN-12 CM1630-06DE P30E 16 UDFN-16 CM1630-08DE P308E Note 1: Parts are shipped in Tape & Reel form unless otherwise specified. Specifications ABSOLUTE MAXIMUM RATINGS PARAMETER RATING UNITS -65 to +150 °C DC Power per Resistor 100 mW DC Package Power Rating 500 mW Storage Temperature Range Rev. 2 | Page 3 of 18 | www.onsemi.com CM1630 STANDARD OPERATING CONDITIONS PARAMETER Operating Temperature Range RATING UNITS -40 to +85 °C ELECTRICAL OPERATING CHARACTERISTICS (SEE NOTE1) SYMBOL R PARAMETER CONDITIONS Resistance CTOTAL MIN TYP MAX UNITS 80 100 120 Ω Total Channel Capacitance At 2.5VDC Reverse Bias, 1MHz, 30mVAC 14 17 22 pF C Capacitance C1 At 2.5VDC Reverse Bias, 1MHz, 30mVAC 7 8.5 11 pF VDIODE Standoff Voltage IDIODE=10μA 6.0 ILEAK Diode Leakage Current (reverse bias) VDIODE=+3.3V 0.1 VSIG Signal Clamp Voltage Positive Clamp Negative Clamp ILOAD = 10mA ILOAD = -10mA VESD RDYN In-system ESD Withstand Voltage a) Human Body Model, MIL-STD-883, Method 3015 b) Contact Discharge per IEC 61000-4-2 Level 4 5.6 -0.4 6.8 -0.8 V 1.0 μA V V Note 2 Dynamic Resistance Positive Negative ±30 kV ±15 kV 2.3 0.9 Ω Ω 200 MHz Cut-off Frequency ZSOURCE=50Ω, ZLOAD=50Ω Channel R = 100Ω, Channel C = 8.5pF Absolute Attenuation @ 1GHz from 0dB Level ZSOURCE = 50Ω, Z LOAD = 50Ω, DC Bias = 0V; Notes 1 and 3 30 dB A800MHz - 6GHz Absolute Attenuation @ 800MHz to 6GHz from 0dB ZSOURCE = 50Ω, Z LOAD = 25 dB f C A1GHz Level 50Ω, DC Bias = 0V; Notes 1 and 3 Note 1: TA=25°C unless otherwise specified. Note 2: ESD applied to input and output pins with respect to GND, one at a time. Note 3: Attenuation / RF curves characterized by a network analyzer using microprobes. Rev.2 | Page 4 of 18 | www.onsemi.com CM1630 Performance Information Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment) Figure 1. Insertion Loss vs. Frequency (FILTER1 Input to GND, CM1436-04DE) Figure 2. Insertion Loss vs. Frequency (FILTER2 Input to GND, CM1436-04DE) Rev. 2 | Page 5 of 18 | www.onsemi.com CM1630 Performance Information (cont’d) Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment) Figure 3. Insertion Loss vs. Frequency (FILTER3 Input to GND, CM1436-04DE) Figure 4. Insertion Loss vs. Frequency (FILTER4 Input to GND, CM1436-04DE) Rev.2 | Page 6 of 18 | www.onsemi.com CM1630 Performance Information (cont’d) Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment) Figure 5. Insertion Loss vs. Frequency (FILTER1 Input to GND, CM1436-06DE) Figure 6. Insertion Loss vs. Frequency (FILTER2 Input to GND, CM1436-06DE) Rev. 2 | Page 7 of 18 | www.onsemi.com CM1630 Performance Information (cont’d) Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment) Figure 7. Insertion Loss vs. Frequency (FILTER3 Input to GND, CM1436-06DE) Figure 8. Insertion Loss vs. Frequency (FILTER4 Input to GND, CM1436-06DE) Rev.2 | Page 8 of 18 | www.onsemi.com CM1630 Performance Information (cont’d) Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment) Figure 9. Insertion Loss vs. Frequency (FILTER5 Input to GND, CM1436-06DE) Figure 10. Insertion Loss vs. Frequency (FILTER6 Input to GND, CM1436-06DE) Rev. 2 | Page 9 of 18 | www.onsemi.com CM1630 Performance Information (cont’d) Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment) Figure 11. Insertion Loss vs. Frequency (FILTER1 Input to GND, CM1436-08DE) Figure 12. Insertion Loss vs. Frequency (FILTER2 Input to GND, CM1436-08DE) Rev.2 | Page 10 of 18 | www.onsemi.com CM1630 Performance Information (cont’d) Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment) Figure 13. Insertion Loss vs. Frequency (FILTER3 Input to GND, CM1436-08DE) Figure 14. Insertion Loss vs. Frequency (FILTER4 Input to GND, CM1436-08DE) Rev. 2 | Page 11 of 18 | www.onsemi.com CM1630 Performance Information (cont’d) Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment) Figure 15. Insertion Loss vs. Frequency (FILTER5 Input to GND, CM1436-08DE) Figure 16. Insertion Loss vs. Frequency (FILTER6 Input to GND, CM1436-08DE) Rev.2 | Page 12 of 18 | www.onsemi.com CM1630 Performance Information (cont’d) Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment) Figure 17. Insertion Loss vs. Frequency (FILTER7 Input to GND, CM1436-08DE) Figure 18. Insertion Loss vs. Frequency (FILTER8 Input to GND, CM1436-08DE) Rev. 2 | Page 13 of 18 | www.onsemi.com CM1630 Performance Information (cont’d) Typical Diode Capacitance vs. Input Voltage Figure 19. Filter Capacitance vs. Input Voltage (normalized to capacitance at 2.5VDC and 25°C) Rev.2 | Page 14 of 18 | www.onsemi.com CM1630 Mechanical Details UDFN-08 Mechanical Specifications Dimensions for the CM1630 supplied in a 8-lead, 0.4mm pitch UDFN package are presented below. PACKAGE DIMENSIONS Package UDFN JEDEC No. MO-229C Leads 8 ✝ Millimeters Inches Dim. Min Nom Max Min Nom Max A 0.45 0.50 0.55 0.018 0.020 0.022 A1 0.00 0.02 0.05 0.000 0.001 0.002 0.127 REF A3 0.005 REF b 0.15 0.20 0.25 0.006 0.008 0.010 D 1.60 1.70 1.80 0.063 0.067 0.071 D2 1.10 1.20 1.30 0.043 0.047 0.051 E 1.25 1.35 1.45 0.049 0.053 0.057 E2 0.30 0.40 0.50 0.012 0.016 0.020 0.40 BSC e K 0.20 L 0.15 # per tape and reel 0.016 BSC 0.008 0.25 0.35 0.006 0.010 0.014 3000 pieces Dimensions for 8-Lead, 0.4mm pitch UDFN package Controlling dimension: millimeters = This package is compliant with JEDEC standard MO-229C with the exception of the "D", "D2", "E", "E2", "K" and "L" dimensions as called out in the table above. Rev. 2 | Page 15 of 18 | www.onsemi.com CM1630 Mechanical Details (cont’d) UDFN-12 Mechanical Specifications Dimensions for the CM1630 suplied in a 12-lead, 0.4mm pitch UDFN package are presented below. PACKAGE DIMENSIONS Package UDFN JEDEC No. MO-229C Leads 12 ✝ Millimeters Inches Dim. Min Nom Max Min Nom Max A 0.45 0.50 0.55 0.018 0.020 0.022 A1 0.00 0.02 0.05 0.000 0.001 0.002 0.127 REF A3 0.005 REF b 0.15 0.20 0.25 0.006 0.008 0.010 D 2.40 2.50 2.60 0.094 0.098 0.102 D2 1.90 2.00 2.10 0.075 0.079 0.083 E 1.25 1.35 1.45 0.049 0.053 0.057 E2 0.30 0.40 0.50 0.012 0.016 0.020 0.40 BSC e K 0.20 L 0.15 # per tape and reel 0.016 BSC 0.008 0.25 0.35 0.006 0.010 0.014 3000 pieces Dimensions for 12-Lead, 0.4mm pitch UDFN package Controlling dimension: millimeters = This package is compliant with JEDEC standard MO-229C with the exception of the "D", "D2", "E", "E2", "K" and "L" dimensions as called out in the table above. Rev.2 | Page 16 of 18 | www.onsemi.com CM1630 Mechanical Details (cont’d) UDFN-16 Mechanical Specifications Dimensions for the CM1630 supplied in a 16-lead, 0.4mm pitch UDFN package are presented below. PACKAGE DIMENSIONS Package UDFN JEDEC No. MO-229C Leads 16 ✝ Millimeters Inches Dim. Min Nom Max Min Nom Max A 0.45 0.50 0.55 0.018 0.020 0.022 A1 0.00 0.02 0.05 0.000 0.001 0.002 0.127 REF A3 0.005 REF b 0.15 0.20 0.25 0.006 0.008 0.010 D 3.20 3.30 3.40 0.126 0.130 0.134 D2 2.70 2.80 2.90 0.106 0.110 0.114 E 1.25 1.35 1.45 0.049 0.053 0.057 E2 0.30 0.40 0.50 0.012 0.016 0.020 0.40 BSC e K 0.20 L 0.15 # per tape and reel 0.016 BSC 0.008 0.25 0.35 0.006 0.010 0.014 3000 pieces Dimensions for 16-Lead, 0.4mm pitch UDFN package Controlling dimension: millimeters ✝ This package is compliant with JEDEC standard MO-229C with the exception of the "D", "D2", "E", "E2", "K" and "L" dimensions as called out in the table above. Rev. 2 | Page 17 of 18 | www.onsemi.com CM1630 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 Rev.2 | Page 18 of 18 | www.onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative