ONSEMI CM1460-08DE

Praetorian ® C-L-C LCD and Camera
EMI FilterArray with ESD Protection
CM1460
Features
Product Description
•
The CM1460 is a family of pi-style EMI filter arrays
with ESD protection, which integrates four, six and
eight filters (C-L-C) in small form factor TDFN
0.50mm pitch packages. Each EMI filter channel of
the CM1460 is implemented as a 3-pole L-C filter
where the component values are 15pF-17nH-15pF.
The CM1460's roll-off frequency at -6dB attenuation
is 350MHz and can be used in applications where the
data rates are as high as 140Mbps while providing
greater than 30dB over the 800MHz to 2.7GHz
frequency range.
•
•
•
•
•
•
•
•
Four, six, and eight channels of EMI filtering with
integrated ESD protection
Pi-style EMI filters in a capacitor-inductorcapacitor (C-L-C) network
±15kV ESD protection on each channel
(IEC 61000-4-2 Level 4, contact discharge)
±30kV ESD protection on each channel (HBM)
Greater than -35dB attenuation (typical) at 1GHz
TDFN lead-free package with 0.50mm lead pitch:
• 4-ch. = 8-lead TDFN
• 6-ch. = 12-lead TDFN
• 8-ch. = 16-lead TDFN
Tiny TDFN package size:
• 8-lead: 2.00mm x 2.00mm
• 12-lead: 3.00mm x 1.35mm
• 16-lead: 4.00mm x 1.60mm
Increased robustness against vertical impacts
during manufacturing process
Lead-free RoHS compliant finishing
Applications
•
•
•
•
•
•
LCD and camera data lines in mobile handsets
I/O port protection for mobile handsets, notebook
computers, PDAs etc.
EMI filtering for data ports in cell phones, PDAs
or notebook computers.
Wireless handsets
Handheld PCs/PDAs
LCD and camera modules
The parts include ESD diodes on every pin, which
provide a very high level of protection for sensitive
electronic components that may be subjected to
electrostatic discharge (ESD). The ESD protection
diodes connected to the filter ports are designed and
characterized to safely dissipate ESD strikes of
±15kV, beyond the maximum requirement of the
IEC61000-4-2 international standard. Using the MILSTD-883 (Method 3015) specification for Human
Body Model (HBM) ESD, the pins are protected for
contact discharges at greater than ±30kV.
This device is particularly well suited for wireless
handsets, mobile LCD modules and PDAs because
of its small package format and easy-to-use pin
assignments. In particular, the CM1460 is ideal for
EMI filtering and protecting data and control lines for
the LCD display and camera interface in mobile
handsets.
The CM1460 is housed in space saving, low profile,
0.50mm pitch TDFN packages and is available in
lead-free format.
©2010 SCILLC. All rights reserved.
February 2010 – Rev. 2
Publication Order Number:
CM1460/D
CM1460
Electrical Schematic
1 of 4, 6 or 8 EMI/RFI Filter Channels
with Integrated ESD Protection
Rev. 2 | Page 2 of 19 | www.onsemi.com
CM1460
PIN DESCRIPTIONS
DEVICE PIN(s)
DEVICE PIN(s)
-04
-06
-08
NAME
1
1
1
FILTER1
2
2
2
3
3
4
-04
-06
-08
NAME
Filter + ESD Channel 1
8
12
16
FILTER1
Filter + ESD Channel 1
FILTER2
Filter + ESD Channel 2
7
11
15
FILTER2
Filter + ESD Channel 2
3
FILTER3
Filter + ESD Channel 3
6
10
14
FILTER3
Filter + ESD Channel 3
4
4
FILTER4
Filter + ESD Channel 4
5
9
13
FILTER4
Filter + ESD Channel 4
5
5
FILTER5
Filter + ESD Channel 5
8
12
FILTER5
Filter + ESD Channel 5
6
6
FILTER6
Filter + ESD Channel 6
7
11
FILTER6
Filter + ESD Channel 6
7
FILTER7
Filter + ESD Channel 7
10
FILTER7
Filter + ESD Channel 7
8
FILTER8
Filter + ESD Channel 8
9
FILTER8
Filter + ESD Channel 8
GND PAD
GND
DESCRIPTION
DESCRIPTION
Device Ground
Ordering Information
PART NUMBERING INFORMATION
1
Pins
Package
Ordering Part Number
Part Marking
8
TDFN-8
CM1460-04DE
XE
12
TDFN-12
CM1460-06DE
N60E
16
TDFN-16 EEP
CM1460-08DE
N608E
Note 1: Parts are shipped in Tape & Reel form unless otherwise specified.
Rev. 2 | Page 3 of 19 | www.onsemi.com
CM1460
Specifications
ABSOLUTE MAXIMUM RATINGS
PARAMETER
RATING
UNITS
–65 to +150
°C
Current per Inductor
30
mA
DC Package Power Rating
500
mW
RATING
UNITS
–40 to +85
°C
Storage Temperature Range
STANDARD OPERATING CONDITIONS
PARAMETER
Operating Temperature Range
Rev. 2 | Page 4 of 19 | www.onsemi.com
CM1460
ELECTRICAL OPERATING CHARACTERISTICS (SEE NOTE1)
SYMBOL
L
PARAMETER
CONDITIONS
MIN
Channel Inductance
CTOTAL
TYP
MAX
17
At 2.5VDC Reverse
Bias, 1MHz, 30mVAC
C
Capacitance C1
At 2.5VDC Reverse
Bias, 1MHz, 30mVAC
15
pF
VDIODE
Standoff Voltage
IDIODE=10µA
6.0
V
ILEAK
Diode Leakage Current (reverse bias)
VDIODE=+3.3V
0.1
1.0
µA
VSIG
Signal Clamp Voltage
Positive Clamp
Negative Clamp
ILOAD = 10mA
ILOAD = –10mA
6.8
–0.8
9.0
-0.4
V
V
RDYN
f
R
In-system ESD Withstand Voltage
a) Human Body Model, MIL-STD-883, Method
3015
b) Contact Discharge per IEC 61000-4-2 Level 4
5.6
–1.5
30
nH
Total Channel Capacitance
VESD
24
UNITS
36
pF
Notes 2 and 3
±30
kV
±15
kV
Dynamic Resistance
Positive
Negative
2.3
0.9
Ω
Ω
Roll-off Frequency at -6dB Attenuation
ZSOURCE=50Ω, ZLOAD=50Ω
350
MHz
Note 1: TA=25°C unless otherwise specified.
Note 2: ESD applied to input and output pins with respect to GND, one at a time.
Note 3: Clamping voltage is measured at the opposite side of the EMI filter to the ESD pin (i.e. if ESD is applied to pin A1 then
clamping voltage is measured at pin C1). Unused pins are left open.
Rev. 2 | Page 5 of 19 | www.onsemi.com
CM1460
Performance Information
Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment)
Figure 1. Filter 1 Insertion Loss (CM1460-04DE)
Figure 2. Filter 2 Insertion Loss (CM1460-04DE)
Rev. 2 | Page 6 of 19 | www.onsemi.com
CM1460
Performance Information
Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment)
Figure 3. Filter 3 Insertion Loss (CM1460-04DE)
Figure 4. Filter 4 Insertion Loss (CM1460-04DE)
Rev. 2 | Page 7 of 19 | www.onsemi.com
CM1460
Performance Information
Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment)
Figure 5. Filter 1 Insertion Loss (CM1460-06DE)
Figure 6. Filter 2 Insertion Loss (CM1460-06DE)
Rev. 2 | Page 8 of 19 | www.onsemi.com
CM1460
Performance Information
Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment)
Figure 7. Filter 3 Insertion Loss (CM1460-06DE)
Figure 8. Filter 4 Insertion Loss (CM1460-06DE)
Rev. 2 | Page 9 of 19 | www.onsemi.com
CM1460
Performance Information
Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment)
Figure 9. Filter 5 Insertion Loss (CM1460-06DE)
Figure 10. Filter 6 Insertion Loss (CM1460-06DE)
Rev. 2 | Page 10 of 19 | www.onsemi.com
CM1460
Performance Information
Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment)
Figure 11. Filter 1 Insertion Loss (CM1460-08DE)
Figure 12. Filter 2 Insertion Loss (CM1460-08DE)
Rev. 2 | Page 11 of 19 | www.onsemi.com
CM1460
Performance Information
Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment)
Figure 13. Filter 3 Insertion Loss (CM1460-08DE)
Figure 14. Filter 4 Insertion Loss (CM1460-08DE)
Rev. 2 | Page 12 of 19 | www.onsemi.com
CM1460
Performance Information
Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment)
Figure 15. Filter 5 Insertion Loss (CM1460-08DE)
Figure 16. Filter 6 Insertion Loss (CM1460-08DE)
Rev. 2 | Page 13 of 19 | www.onsemi.com
CM1460
Performance Information
Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment)
Figure 17. Filter 7 Insertion Loss (CM1460-08DE)
Figure 18. Filter 8 Insertion Loss (CM1460-08DE)
Rev. 2 | Page 14 of 19 | www.onsemi.com
CM1460
Typical Diode Capacitance vs. Input Voltage
Figure 19. Filter Capacitance vs. Input Voltage
(normalized to capacitance at 2.5VDC and 25°C)
Rev. 2 | Page 15 of 19 | www.onsemi.com
CM1460
Mechanical Details
TDFN-08 Mechanical Specifications, 0.5mm
The CM1460-04DE is supplied in an 8-lead 0.5mm TDFN package. Dimensions are presented below.
PACKAGE DIMENSIONS
Package
TDFN
JEDEC
No.
MO-229 (Var. VCCD-3)
Leads
8
Millimeters
Dim.
A
*
Inches
Min
Nom
Max
Min
Nom
Max
0.70
0.75
0.80
0.028
0.030
0.031
0.20 REF
A3
0.008 REF
b
0.20
0.25
0.30
0.008
0.010
0.012
D
1.90
2.00
2.10
0.075
0.079
0.083
D2
1.50
1.60
1.70
0.059
0.063
0.067
E
1.90
2.00
2.10
0.075
0.079
0.083
E2
0.80
0.90
1.00
0.031
0.035
0.039
0.50 BSC
e
K
0.20
L
0.20
# per
tape and
reel
0.020 BSC
0.008
0.30
0.40
0.008
0.012
0.016
3000 pieces
Controlling dimension: millimeters
*
This package is compliant with JEDEC standard MO-229, variation
VCCD-3 with exception of the D2 and E2 dimensions as called out in
the table above and the r1 dimension which is not specified in the MO229 standard.
Dimensions for 8-Lead, 0.5mm pitch TDFN
package
Rev. 2 | Page 16 of 19 | www.onsemi.com
CM1460
Mechanical Details (Cont’d)
TDFN-12 Mechanical Specifications, 0.5mm
The CM1460-06DE is supplied in an 12-lead, 0.5mm pitch TDFN package. Dimensions are presented below.
PACKAGE DIMENSIONS
Package
TDFN
JEDEC
No.
MO-229C
Leads
12
*
Millimeters
Dim.
Inches
Min
Nom
Max
Min
Nom
Max
A
0.70
0.75
0.80
0.028
0.030
0.031
A1
0.00
0.02
0.05
0.000
0.001
0.002
0.20 REF
A3
0.008 REF
b
0.20
0.25
0.30
0.008
0.010
0.012
D
2.90
3.00
3.10
0.114
0.118
0.122
D2
2.40
2.50
2.60
0.095
0.098
0.102
E
1.25
1.35
1.45
0.049
0.053
0.057
E2
0.30
0.40
0.50
0.012
0.016
0.020
0.50 BSC
e
K
0.20
L
0.20
# per
tape and
reel
0.020 BSC
0.008
0.25
0.30
0.008
0.010
0.012
3000 pieces
Dimensions for 12-Lead, 0.5mm pitch
TDFN package
Controlling dimension: millimeters
*
This package is compliant with JEDEC standard MO-229C with
the exception of the D, D2, E, E2, K and L dimensions as called
out in the table above.
Rev. 2 | Page 17 of 19 | www.onsemi.com
CM1460
Mechanical Details (Cont’d)
TDFN-16EEP Mechanical Specifications, 0.5mm
The CM1460-08DE is supplied in a 16-lead, 0.5mm pitch TDFN package with Exposed End Pads (EEP).
Dimension are presented below.
PACKAGE DIMENSIONS
Package
TDFN
JEDEC
No.
MO-229C
Leads
16
*
Millimeters
Dim.
Inches
Min
Nom
Max
Min
Nom
Max
A
0.70
0.75
0.80
0.028
0.030
0.031
A1
0.00
0.02
0.05
0.000
0.001
0.002
0.20 REF
A3
0.008 REF
b
0.20
0.25
0.30
0.008
0.010
0.012
D
3.90
4.00
4.10
0.153
0.157
0.161
D2
3.10
3.20
3.30
0.122
0.126
0.130
E
1.50
1.60
1.70
0.059
0.063
0.067
E2
0.30
0.40
0.50
0.012
0.016
0.020
0.50 BSC
e
K
0.20
L
0.20
M
# per
tape and
reel
0.020 BSC
0.008
0.30
0.40
0.008
0.25 REF
0.010
0.012
0.010 REF
3000 pieces
Dimensions for 16-Lead, 0.5mm pitch TDFN
package with Exposed End Pads (EEP)
Controlling dimension: millimeters
*
This package is compliant with JEDEC standard MO-229C with the
exception of the D, D2, E, E2, K and L dimensions as called out in the
table above.
Rev. 2 | Page 18 of 19 | www.onsemi.com
CM1460
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any
products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising
out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical”
parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating
parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the
rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to
support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or
use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such
unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action
Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
FULFILLMENT
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone:
Phone 303-675-2175 or 800-344-3860 Toll Free USA/Canada
Fax:
Fax 303-675-2176 or 800-344-3867 Toll Free USA/Canada
Email:
Email [email protected]
N. American Technical Support:
Support 800-282-9855
Toll Free USA/Canada
Europe, Middle East and Africa Technical
Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81-3-5773-3850
Rev. 2 | Page 19 of 19 | www.onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative