CMO3 Series 5 x 7 mm, 3.3 Volt, CMOS, Clock Oscillator CMO3 Series THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS. 5x7mm Surface PLEASE REFER TO THE M23.3V PRODUCT SERIES.Mount Crystal Clock Oscillators CMOS Compatible Tri-State Feature for Auto Test Systems Tape & Reel Packaging ±20ppm Available - Please Contact Factory E L E C T R I C A L S P E C I F I C AT I O N S E L E C T R I C A LCMO3 S P E C I F I C AT I O N S MODEL MODEL Range (MHz) Frequency 1.5 to CMO3 156.250 Frequency Range (ppm) (MHz) Frequency Stability Frequency Stability (ppm) Overall (Typical) Overall (Typical) 0ºC to 70ºC 1.5 to 156.250 Inclusive of calibration, temperature, voltage, load, shock, vibration, aging Inclusive of calibration, temperature, voltage, load, shock,vibration, aging ±25 0°C to 70°C ±25 -40ºC to +85ºC ±50 -40°C to +85°C ±50 Temperature Range (°C) Temperature Range (°C) Operating Operating -40°C to +85°C -40°C to +85°C Storage Storage -40°C to to +125°C -40°C +125°C Supply Voltage Supply Voltage (V)(V) Input Current (mA) Input Current (mA) Symmetry (%) CMOS Symmetry (%) CMOS Transistion Times Transition Time TimeVdd (ns) 20% Rise to 80% Fall Time (ns) +3.3 ±10% +3.3 ±10% 1.5MHz to 35MHz to to 100MHz >100MHz to 156.25MHz >67 MHz to 156.25 MHz 1.5 MHz to 20 MHz >20>35MHz MHz to to 5050MHz MHz >50MHz >50 MHz 67 MHz <10 <15 <25 <30 <55 <10 <20 <30 45/55 1.5MHz to 50MHz 1.5 MHz to 50 <5MHz Rise Time (ns) <5 Fall Time (ns) <5 Load “0” Level (VOL) “1” Level (VOH) 45/55 >50MHz to 156.250MHz >50 MHz to <3 156.250 MHz <3 <5 Load 15pF 0.3 <3 <3 15pF 3.0 “0” Level (VOL) max 10% Vdd “1” Level (VOH) min 90% Vdd Start up Time (ms) <10 Start up Time (ms) <10 PA R T N U M B E R I N G G U I D E CMO3XXXC - Specify Frequency “Blank” = 0oC to 70oC Operating Temp. “M” = -40oC to 85oC Operating Temp. “A” = ±25ppm (-40oC to 85oC Excluding Aging) “B” = ±50ppm “C” = ±100ppm “D” = ±20ppm Excluding Aging (Contact Factory) “Blank” = Fixed Frequency “E” = Tri-State MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. 2553 N. Edgington Street, Franklin Park, IL 60131 y Phone: 847.451.1000 y Fax: 847.451.7585Revision: 03-01-07 CMO3 Series 3.3V 5x7mm Surface Mount Crystal Clock Oscillators CMO3 Series PIN 5 x 7 mm, 3.3 Volt, CMOS, Clock Oscillator FUNCTION 1 N/C / Tri-State 2 Ground 3 CMO3 Series Output THIS PRODUCT IS NOT RECOMMENDED FOR NEW DESIGNS. + VCC 4 PLEASE REFER TO THE M2 PRODUCT SERIES. 3.3V 5x7mm Surface Mount Crystal Clock Oscillators PIN FUNCTION 1 N/C / Tri-State 2 Ground 3 Output 4 + VCC OUTPUT WAVEFORM TEST CIRCUIT DIAGRAM OUTPUT WAVEFORM TEST CIRCUIT DIAGRAM MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS TEST METHODS REFERENCE PROCEDURES DESCRIPTION Temperature Cycle MIL-STD-833, Mtd 1010, Cond. B -55°C to +125°C; Air-to-Air; 100 cycles; 10 min. dwell Mechanical Shock MIL-STD-883, Mtd 2002, Cond. B 1500 g’s Vibration MIL-STD 883, Mtd 2007, Cond. B 20-2000 Hz; 0.06 inch; 15g’s; 3 planes Humidity Steady State MIL-STD-202, Mtd 103 40°C; 90%-95% R.H.; 56 days Thermal Shock MIL-STD-883, Mtd 1011.7 Cond. B 100°C to 0°C; Water-to-Water; 15 cycles MIL-STD-883, 3015 Class II REFERENCEMtd PROCEDURES 2 KV to 4 KV Threshold DESCRIPTION MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS Electrostatic Discharge TEST METHODS Solderability Temperature Cycle Hermeticity Mechanical to Shock Resistance Soldering MIL-STD-883, MIL-STD-833, MIL-STD-883, MIL-STD-883, MIL-STD-202, Mtd Mtd Mtd Mtd 2022.2 1010, Cond. B 1014.8, Cond. A1 2002, 210D, Cond. Cond. BJ Solder dip; Meniscograph -55°C to +125°C; Air-to-Air;Criteria 100 cycles; 10 min. dwell Mass spectro. 2 x 10-8 atmos. CC/sec He 1500 g’s30 seconds 235°C; Lead Integrity Vibration MIL-STD-883, 2004.5, Cond. tension & bend stress MIL-STD 883, Mtd 2007, Cond. B A, B1 Lead 20-2000 Hz; 0.06 inch; 15g’s; 3 planes HumidityPermanence Steady State Marking Thermal Life Test Shock MIL-STD-202, MIL-STD-883, Mtd 103 2015.8 MIL-STD-883, Mtd 1011.7 1005.6 Cond. B Electrostatic Discharge MIL-STD-883, Mtd 3015 Class II Solderability Hermeticity MIL-STD-883, Mtd 2022.2 Solder dip; Meniscograph Criteria MIL-STD-883, Mtd 1014.8, Cond. A1 Mass spectro. 2 x 10-8 atmos. CC/sec He 800-888-1499 or www.champtech.com 40°C; 90%-95% R.H.; 56 days Resistance to solvents 100°C to 0°C; Water-to-Water; 15 cycles 125°C, powered, 1000 hours minimum 2 KV to 4 KV Threshold 2553 N. Edgington Street, Franklin Park, IL 60131 y Phone: 847.451.1000 y Fax: 847.451.7585 235°C; 30 seconds Resistance to Soldering MIL-STD-202, Mtd 210D, Cond. J 2 A, B1 Lead tension & bend stress MIL-STD-883, Mtd 2004.5, Cond. Lead Integrity MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. MIL-STD-883, 2015.8 solvents Marking Permanence Please see www.mtronpti.com for our complete offering andMtd detailed datasheets. Contact us forResistance your applicationtospecific requirements: MtronPTI 1-800-762-8800. Life Test MIL-STD-883, Mtd 1005.6 125°C, powered, 1000 hours minimum Revision: 03-01-07 2553 N. Edgington Street, Franklin Park, IL 60131 y Phone: 847.451.1000 y Fax: 847.451.7585 MtronPTI Lead Free Solder Profile MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.