OMRON D3V-21G3MK-1C4A-TKH

Miniature Basic Switch
D3V
Reliable Basic Switch with External Lever
• Available by 0.1 A, 6 A, 11 A, 16 A and 21 A models, all with
self-cleaning contacts. 0.1 A utilizes gold alloy crossbar
contacts for high reliability at low loads.
• Available with internally or externally fitted levers, and 2 fixing positions for external levers.
• Conforms to EN61058-1 UL1054.
• High Temperature models rated up to 200°C (D3V-6, D3V-01)
and 155°C (D3V-11) are available.
• RoHS Compliant.
Ordering Information
■ Model Number Legend
D3V -
1 2 3 4
1.
5 6 7
Ratings
21:
20 (4) A at 250 VAC
16:
16 (3) A at 250 VAC
11:
11 (3) A at 250 VAC
6:
6 (2) A at 250 VAC
01:
0.1 A at 125 VAC
2.
Contact Gap
None: 1 mm (F gap)
G:
0.5 mm (G gap)
3.
Actuator
None: Pin plunger
1:
Short hinge lever
2:
Hinge lever
3:
Long hinge lever
4:
Simulated roller lever
5:
Short hinge roller lever
6:
Hinge roller lever
4.
8
9
10
5.
Contact Form
1:
SPDT
2:
SPST-NC
3:
SPST-NO
6.
Terminals
A:
Solder terminals
C2:
Quick-connect terminal (#187)
C:
Quick-connect terminal (#250)
C6:
RAST5 terminal (#250)
Maximum Operating Force
5:
200 gf
4A:
125 gf
4:
100 gf
3:
50 gf
2:
25 gf
7.
Note: These OF values are for
the pin plunger models.
8.
Enclosure Material
None: Standard
T:
High Temperature
200°C for D3V-6, D3V-01
155°C for D3V-11
W2:
9.
EN60695-2-11/-12 Approved
(Glow wire flammability test method
with PTI = 250)
Mounting Hole Size
None: 3.1 mm
K:
2.9 mm
10. Special Code
None: Standard
H:
High Temperature (125°C)
E:
Special Rating: 21 (8) A
(D3V-21, only)
Hinge Position
None: Internal / Far from Plunger
M:
External / Far from Plunger
K:
External / Near Plunger
Miniature Basic Switch
D3V
73
■ Available Combinations
Model D3V-21
21 A
Rated current
OF
Contact
gap
Heat resistance Terminals
125 gf
D3V-16
D3V-11
D3V-6
D3V-01
16 A
11 A
6A
0.1 A
200 gf
100 gf
200 gf
100 gf
50 gf
200 gf
100 gf
50 gf
F/G
F/G
F/G
F
G
G
F
G
G
G
F
G
1 mm or
1 mm or 1 mm or
0.5 mm
1 mm 0.5 mm 1 mm 0.5 mm 0.5 mm 0.5 mm 1 mm 0.5 mm 0.5 mm
0.5 mm 0.5 mm
❍
❍
❍
❍
❍
#187
❍
❍
#250
❍
❍
❍
❍
RAST5
#187
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
#250
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
RAST5
EN60695-2-11
approved
W2: 105°C
F/G
1 mm or
0.5 mm
❍
#250
EN60695-2-11
approved
W2: 85°C
25 gf
❍
Standard (85°C) #187
Standard
(105°C)
50 gf
#187
❍
#250
❍
❍
❍
❍
❍
❍
❍
RAST5
High
temperature
H: 125°C
#187
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
#250
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
❍
High
temperature
T: 155°C
#187
❍
❍
❍
❍
❍
#250
❍
❍
❍
❍
❍
#187
❍
❍
❍
❍
❍
❍
#250
❍
❍
❍
❍
❍
❍
❍
❍
RAST5
❍
RAST5
High
temperature
T: 200°C
RAST5
Note: 1. ❍: Available model.
2. Consult OMRON for specific models with standard approval.
■ List of Models
21 A (OF: 125 gf)
Actuator
---
Pin plunger
Short hinge lever
Hinge lever
Long hinge lever
Simulated roller lever
Short hinge roller lever
Hinge roller lever
74
Hinge position
(far from plunger)
Miniature Basic Switch
Contact form
SPDT
SPST-NC
D3V-21G-1@4A-Δ-∇
D3V-21G-2@4A-Δ-∇
Internal
D3V-21G1-1@4A-Δ-∇
D3V-21G1-2@4A-Δ-∇
External (M)
D3V-21G1M-1@4A-Δ-∇ D3V-21G1M-2@4A-Δ-∇
Internal
D3V-21G2-1@4A-Δ-∇
External (M)
D3V-21G2M-1@4A-Δ-∇ D3V-21G2M-2@4A-Δ-∇
D3V-21G2-2@4A-Δ-∇
Internal
D3V-21G3-1@4A-Δ-∇
External (M)
D3V-21G3M-1@4A-Δ-∇ D3V-21G3M-2@4A-Δ-∇
D3V-21G3-2@4A-Δ-∇
D3V-21G4-2@4A-Δ-∇
SPST-NO
D3V-21G-3@4A-Δ-∇
D3V-21G1-3@4A-Δ-∇
D3V-21G1M-3@4A-Δ-∇
D3V-21G2-3@4A-Δ-∇
D3V-21G2M-3@4A-Δ-∇
D3V-21G3-3@4A-Δ-∇
D3V-21G3M-3@4A-Δ-∇
Internal
D3V-21G4-1@4A-Δ-∇
External (M)
D3V-21G4M-1@4A-Δ-∇ D3V-21G4M-2@4A-Δ-∇
D3V-21G4M-3@4A-Δ-∇
D3V-21G5-3@4A-Δ-∇
Internal
D3V-21G5-1@4A-Δ-∇
External (M)
D3V-21G5M-1@4A-Δ-∇ D3V-21G5M-2@4A-Δ-∇
D3V-21G5M-3@4A-Δ-∇
Internal
D3V-21G6-1@4A-Δ-∇
D3V-21G6-3@4A-Δ-∇
External (M)
D3V-21G6M-1@4A-Δ-∇ D3V-21G6M-2@4A-Δ-∇
D3V
D3V-21G5-2@4A-Δ-∇
D3V-21G4-3@4A-Δ-∇
D3V-21G6-2@4A-Δ-∇
D3V-21G6M-3@4A-Δ-∇
16 A (OF: 200 gf)
Actuator
Hinge position
(far from plunger)
Contact form
SPST-NC
D3V-16-2@5-●-Δ-∇
SPST-NO
D3V-16-3@5-●-Δ-∇
Pin plunger
---
SPDT
D3V-16-1@5-●-Δ-∇
Short hinge lever
Internal
External (M)
Internal
External (M)
Internal
External (M)
D3V-161-1@5-●-Δ-∇
D3V-161M-1@5-●-Δ-∇
D3V-162-1@5-●-Δ-∇
D3V-162M-1@5-●-Δ-∇
D3V-163-1@5-●-Δ-∇
D3V-163M-1@5-●-Δ-∇
D3V-161-2@5-●-Δ-∇
D3V-161M-2@5-●-Δ-∇
D3V-162-2@5-●-Δ-∇
D3V-162M-2@5-●-Δ-∇
D3V-163-2@5-●-Δ-∇
D3V-163M-2@5-●-Δ-∇
D3V-161-3@5-●-Δ-∇
D3V-161M-3@5-●-Δ-∇
D3V-162-3@5-●-Δ-∇
D3V-162M-3@5-●-Δ-∇
D3V-163-3@5-●-Δ-∇
D3V-163M-3@5-●-Δ-∇
Internal
External (M)
Internal
External (M)
D3V-164-1@5-●-Δ-∇
D3V-164M-1@5-●-Δ-∇
D3V-165-1@5-●-Δ-∇
D3V-165M-1@5-●-Δ-∇
D3V-164-2@5-●-Δ-∇
D3V-164M-2@5-●-Δ-∇
D3V-165-2@5-●-Δ-∇
D3V-165M-2@5-●-Δ-∇
D3V-164-3@5-●-Δ-∇
D3V-164M-3@5-●-Δ-∇
D3V-165-3@5-●-Δ-∇
D3V-165M-3@5-●-Δ-∇
Internal
External (M)
D3V-166-1@5-●-Δ-∇
D3V-166M-1@5-●-Δ-∇
D3V-166-2@5-●-Δ-∇
D3V-166M-2@5-●-Δ-∇
D3V-166-3@5-●-Δ-∇
D3V-166M-3@5-●-Δ-∇
Contact form
SPST-NC
D3V-16-2@4-●-Δ-∇
SPST-NO
D3V-16-3@4-●-Δ-∇
Hinge lever
Long hinge lever
Simulated roller lever
Short hinge roller lever
Hinge roller lever
16 A (OF: 100 gf)
Actuator
Hinge position
(far from plunger)
Pin plunger
---
SPDT
D3V-16-1@4-●-Δ-∇
Short hinge lever
Internal
External (M)
Internal
External (M)
Internal
External (M)
D3V-161-1@4-●-Δ-∇
D3V-161M-1@4-●-Δ-∇
D3V-162-1@4-●-Δ-∇
D3V-162M-1@4-●-Δ-∇
D3V-163-1@4-●-Δ-∇
D3V-163M-1@4-●-Δ-∇
D3V-161-2@4-●-Δ-∇
D3V-161M-2@4-●-Δ-∇
D3V-162-2@4-●-Δ-∇
D3V-162M-2@4-●-Δ-∇
D3V-163-2@4-●-Δ-∇
D3V-163M-2@4-●-Δ-∇
D3V-161-3@4-●-Δ-∇
D3V-161M-3@4-●-Δ-∇
D3V-162-3@4-●-Δ-∇
D3V-162M-3@4-●-Δ-∇
D3V-163-3@4-●-Δ-∇
D3V-163M-3@4-●-Δ-∇
Internal
External (M)
Internal
External (M)
D3V-164-1@4-●-Δ-∇
D3V-164M-1@4-●-Δ-∇
D3V-165-1@4-●-Δ-∇
D3V-165M-1@4-●-Δ-∇
D3V-164-2@4-●-Δ-∇
D3V-164M-2@4-●-Δ-∇
D3V-165-2@4-●-Δ-∇
D3V-165M-2@4-●-Δ-∇
D3V-164-3@4-●-Δ-∇
D3V-164M-3@4-●-Δ-∇
D3V-165-3@4-●-Δ-∇
D3V-165M-3@4-●-Δ-∇
Internal
External (M)
D3V-166-1@4-●-Δ-∇
D3V-166M-1@4-●-Δ-∇
D3V-166-2@4-●-Δ-∇
D3V-166M-2@4-●-Δ-∇
D3V-166-3@4-●-Δ-∇
D3V-166M-3@4-●-Δ-∇
Contact form
SPST-NC
D3V-11-2@5-●-Δ-∇
SPST-NO
D3V-11-3@5-●-Δ-∇
Hinge lever
Long hinge lever
Simulated roller lever
Short hinge roller lever
Hinge roller lever
11 A (OF: 200 gf)
Actuator
Hinge position
(far from plunger)
Pin plunger
---
SPDT
D3V-11-1@5-●-Δ-∇
Short hinge lever
Internal
External (M)
Internal
External (M)
Internal
External (M)
D3V-111-1@5-●-Δ-∇
D3V-111M-1@5-●-Δ-∇
D3V-112-1@5-●-Δ-∇
D3V-112M-1@5-●-Δ-∇
D3V-113-1@5-●-Δ-∇
D3V-113M-1@5-●-Δ-∇
D3V-111-2@5-●-Δ-∇
D3V-111M-2@5-●-Δ-∇
D3V-112-2@5-●-Δ-∇
D3V-112M-2@5-●-Δ-∇
D3V-113-2@5-●-Δ-∇
D3V-113M-2@5-●-Δ-∇
D3V-111-3@5-●-Δ-∇
D3V-111M-3@5-●-Δ-∇
D3V-112-3@5-●-Δ-∇
D3V-112M-3@5-●-Δ-∇
D3V-113-3@5-●-Δ-∇
D3V-113M-3@5-●-Δ-∇
Internal
External (M)
Internal
External (M)
D3V-114-1@5-●-Δ-∇
D3V-114M-1@5-●-Δ-∇
D3V-115-1@5-●-Δ-∇
D3V-115M-1@5-●-Δ-∇
D3V-114-2@5-●-Δ-∇
D3V-114M-2@5-●-Δ-∇
D3V-115-2@5-●-Δ-∇
D3V-115M-2@5-●-Δ-∇
D3V-114-3@5-●-Δ-∇
D3V-114M-3@5-●-Δ-∇
D3V-115-3@5-●-Δ-∇
D3V-115M-3@5-●-Δ-∇
Internal
External (M)
D3V-116-1@5-●-Δ-∇
D3V-116M-1@5-●-Δ-∇
D3V-116-2@5-●-Δ-∇
D3V-116M-2@5-●-Δ-∇
D3V-116-3@5-●-Δ-∇
D3V-116M-3@5-●-Δ-∇
Hinge lever
Long hinge lever
Simulated roller lever
Short hinge roller lever
Hinge roller lever
• The @ in the model number is for the terminal code.
A:
Solder/quick-connect terminals (#187)
C2:
Quick-connect terminals (#187)
C:
Quick-connect terminals (#250)
C6
RAST5 terminals (#250)
• The ● in the model number is for the enclosure material
None: Standard
T:
High Temperature (200°C for D3V-6/-01, 155°C for D3V-11)
W2: EN60695-2-11/-12 conformity with PTI=250
• The Δ in the model number is for the mounting hole size.
None: 3.1 mm
K:
2.9 mm
• The ∇ in the model number is for the special code
None: Standard
H:
High Temperature (125°C)
E:
Special rating of 21A (8)A (for D3V-21 only)
Miniature Basic Switch
D3V
75
11 A (OF: 100 gf)
Actuator
Hinge position
(far from plunger)
Contact form
SPST-NC
D3V-11-2@4-●-Δ-∇
SPST-NO
D3V-11-3@4-●-Δ-∇
Pin plunger
---
SPDT
D3V-11-1@4-●-Δ-∇
Short hinge lever
Internal
External (M)
Internal
External (M)
Internal
External (M)
D3V-111-1@4-●-Δ-∇
D3V-111M-1@4-●-Δ-∇
D3V-112-1@4-●-Δ-∇
D3V-112M-1@4-●-Δ-∇
D3V-113-1@4-●-Δ-∇
D3V-113M-1@4-●-Δ-∇
D3V-111-2@4-●-Δ-∇
D3V-111M-2@4-●-Δ-∇
D3V-112-2@4-●-Δ-∇
D3V-112M-2@4-●-Δ-∇
D3V-113-2@4-●-Δ-∇
D3V-113M-2@4-●-Δ-∇
D3V-111-3@4-●-Δ-∇
D3V-111M-3@4-●-Δ-∇
D3V-112-3@4-●-Δ-∇
D3V-112M-3@4-●-Δ-∇
D3V-113-3@4-●-Δ-∇
D3V-113M-3@4-●-Δ-∇
Internal
External (M)
Internal
External (M)
D3V-114-1@4-●-Δ-∇
D3V-114M-1@4-●-Δ-∇
D3V-115-1@4-●-Δ-∇
D3V-115M-1@4-●-Δ-∇
D3V-114-2@4-●-Δ-∇
D3V-114M-2@4-●-Δ-∇
D3V-115-2@4-●-Δ-∇
D3V-115M-2@4-●-Δ-∇
D3V-114-3@4-●-Δ-∇
D3V-114M-3@4-●-Δ-∇
D3V-115-3@4-●-Δ-∇
D3V-115M-3@4-●-Δ-∇
Internal
External (M)
D3V-116-1@4-●-Δ-∇
D3V-116M-1@4-●-Δ-∇
D3V-116-2@4-●-Δ-∇
D3V-116M-2@4-●-Δ-∇
D3V-116-3@4-●-Δ-∇
D3V-116M-3@4-●-Δ-∇
Contact form
SPST-NC
D3V-11G-2@3-●-Δ-∇
SPST-NO
D3V-11G-3@3-●-Δ-∇
Hinge lever
Long hinge lever
Simulated roller lever
Short hinge roller lever
Hinge roller lever
11 A (OF: 50 gf)
Actuator
Hinge position
(far from plunger)
Pin plunger
---
SPDT
D3V-11G-1@3-●-Δ-∇
Short hinge lever
Internal
External (M)
Internal
External (M)
Internal
External (M)
D3V-11G1-1@3-●-Δ-∇
D3V-11G1M-1@3-●-Δ-∇
D3V-11G2-1@3-●-Δ-∇
D3V-11G2M-1@3-●-Δ-∇
D3V-11G3-1@3-●-Δ-∇
D3V-11G3M-1@3-●-Δ-∇
D3V-11G1-2@3-●-Δ-∇
D3V-11G1M-2@3-●-Δ-∇
D3V-11G2-2@3-●-Δ-∇
D3V-11G2M-2@3-●-Δ-∇
D3V-11G3-2@3-●-Δ-∇
D3V-11G3M-2@3-●-Δ-∇
D3V-11G1-3@3-●-Δ-∇
D3V-11G1M-3@3-●-Δ-∇
D3V-11G2-3@3-●-Δ-∇
D3V-11G2M-3@3-●-Δ-∇
D3V-11G3-3@3-●-Δ-∇
D3V-11G3M-3@3-●-Δ-∇
Internal
External (M)
Internal
External (M)
D3V-11G4-1@3-●-Δ-∇
D3V-11G4M-1@3-●-Δ-∇
D3V-11G5-1@3-●-Δ-∇
D3V-11G5M-1@3-●-Δ-∇
D3V-11G4-2@3-●-Δ-∇
D3V-11G4M-2@3-●-Δ-∇
D3V-11G5-2@3-●-Δ-∇
D3V-11G5M-2@3-●-Δ-∇
D3V-11G4-3@3-●-Δ-∇
D3V-11G4M-3@3-●-Δ-∇
D3V-11G5-3@3-●-Δ-∇
D3V-11G5M-3@3-●-Δ-∇
Internal
External (M)
D3V-11G6-1@3-●-Δ-∇
D3V-11G6M-1@3-●-Δ-∇
D3V-11G6-2@3-●-Δ-∇
D3V-11G6M-2@3-●-Δ-∇
D3V-11G6-3@3-●-Δ-∇
D3V-11G6M-3@3-●-Δ-∇
Contact form
SPST-NC
D3V-6-2@4-●-Δ-∇
SPST-NO
D3V-6-3@4-●-Δ-∇
Hinge lever
Long hinge lever
Simulated roller lever
Short hinge roller lever
Hinge roller lever
6 A (OF: 100 gf)
Actuator
Hinge position
(far from plunger)
Pin plunger
---
SPDT
D3V-6-1@4-●-Δ-∇
Short hinge lever
Internal
External (M)
Internal
External (M)
Internal
External (M)
D3V-61-1@4-●-Δ-∇
D3V-61M-1@4-●-Δ-∇
D3V-62-1@4-●-Δ-∇
D3V-62M-1@4-●-Δ-∇
D3V-63-1@4-●-Δ-∇
D3V-63M-1@4-●-Δ-∇
D3V-61-2@4-●-Δ-∇
D3V-61M-2@4-●-Δ-∇
D3V-62-2@4-●-Δ-∇
D3V-62M-2@4-●-Δ-∇
D3V-63-2@4-●-Δ-∇
D3V-63M-2@4-●-Δ-∇
D3V-61-3@4-●-Δ-∇
D3V-61M-3@4-●-Δ-∇
D3V-62-3@4-●-Δ-∇
D3V-62M-3@4-●-Δ-∇
D3V-63-3@4-●-Δ-∇
D3V-63M-3@4-●-Δ-∇
Internal
External (M)
Internal
External (M)
D3V-64-1@4-●-Δ-∇
D3V-64M-1@4-●-Δ-∇
D3V-65-1@4-●-Δ-∇
D3V-65M-1@4-●-Δ-∇
D3V-64-2@4-●-Δ-∇
D3V-64M-2@4-●-Δ-∇
D3V-65-2@4-●-Δ-∇
D3V-65M-2@4-●-Δ-∇
D3V-64-3@4-●-Δ-∇
D3V-64M-3@4-●-Δ-∇
D3V-65-3@4-●-Δ-∇
D3V-65M-3@4-●-Δ-∇
Internal
External (M)
D3V-66-1@4-●-Δ-∇
D3V-66M-1@4-●-Δ-∇
D3V-66-2@4-●-Δ-∇
D3V-66M-2@4-●-Δ-∇
D3V-66-3@4-●-Δ-∇
D3V-66M-3@4-●-Δ-∇
Hinge lever
Long hinge lever
Simulated roller lever
Short hinge roller lever
Hinge roller lever
• The @ in the model number is for the terminal code.
A:
Solder/quick-connect terminals (#187)
C2:
Quick-connect terminals (#187)
C:
Quick-connect terminals (#250)
C6
RAST5 terminals (#250)
• The ● in the model number is for the enclosure material
None: Standard
T:
High Temperature (200°C for D3V-6/-01, 155°C for D3V-11)
W2: EN60695-2-11/-12 conformity with PTI=250
76
Miniature Basic Switch
D3V
• The Δ in the model number is for the mounting hole size.
None: 3.1 mm
K:
2.9 mm
• The ∇ in the model number is for the special code
None: Standard
H:
High Temperature (125°C)
E:
Special rating of 21A (8)A (for D3V-21 only)
6 A (OF: 50 gf)
Actuator
Hinge position
(far from plunger)
Contact form
SPST-NC
D3V-6G-2@3-●-Δ-∇
SPST-NO
D3V-6G-3@3-●-Δ-∇
Pin plunger
---
SPDT
D3V-6G-1@3-●-Δ-∇
Short hinge lever
Internal
External (M)
Internal
External (M)
Internal
External (M)
D3V-6G1-1@3-●-Δ-∇
D3V-6G1M-1@3-●-Δ-∇
D3V-6G2-1@3-●-Δ-∇
D3V-6G2M-1@3-●-Δ-∇
D3V-6G3-1@3-●-Δ-∇
D3V-6G3M-1@3-●-Δ-∇
D3V-6G1-2@3-●-Δ-∇
D3V-6G1M-2@3-●-Δ-∇
D3V-6G2-2@3-●-Δ-∇
D3V-6G2M-2@3-●-Δ-∇
D3V-6G3-2@3-●-Δ-∇
D3V-6G3M-2@3-●-Δ-∇
D3V-6G1-3@3-●-Δ-∇
D3V-6G1M-3@3-●-Δ-∇
D3V-6G2-3@3-●-Δ-∇
D3V-6G2M-3@3-●-Δ-∇
D3V-6G3-3@3-●-Δ-∇
D3V-6G3M-3@3-●-Δ-∇
Internal
External (M)
Internal
External (M)
D3V-6G4-1@3-●-Δ-∇
D3V-6G4M-1@3-●-Δ-∇
D3V-6G5-1@3-●-Δ-∇
D3V-6G5M-1@3-●-Δ-∇
D3V-6G4-2@3-●-Δ-∇
D3V-6G4M-2@3-●-Δ-∇
D3V-6G5-2@3-●-Δ-∇
D3V-6G5M-2@3-●-Δ-∇
D3V-6G4-3@3-●-Δ-∇
D3V-6G4M-3@3-●-Δ-∇
D3V-6G5-3@3-●-Δ-∇
D3V-6G5M-3@3-●-Δ-∇
Internal
External (M)
D3V-6G6-1@3-●-Δ-∇
D3V-6G6M-1@3-●-Δ-∇
D3V-6G6-2@3-●-Δ-∇
D3V-6G6M-2@3-●-Δ-∇
D3V-6G6-3@3-●-Δ-∇
D3V-6G6M-3@3-●-Δ-∇
Contact form
SPST-NC
D3V-01-2@3-●-Δ-∇
SPST-NO
D3V-01-3@3-●-Δ-∇
Hinge lever
Long hinge lever
Simulated roller lever
Short hinge roller lever
Hinge roller lever
01 A (OF: 50 gf)
Actuator
Hinge position
(far from plunger)
Pin plunger
---
SPDT
D3V-01-1@3-●-Δ-∇
Short hinge lever
Internal
External (M)
Internal
External (M)
Internal
External (M)
D3V-011-1@3-●-Δ-∇
D3V-011M-1@3-●-Δ-∇
D3V-012-1@3-●-Δ-∇
D3V-012M-1@3-●-Δ-∇
D3V-013-1@3-●-Δ-∇
D3V-013M-1@3-●-Δ-∇
D3V-011-2@3-●-Δ-∇
D3V-011M-2@3-●-Δ-∇
D3V-012-2@3-●-Δ-∇
D3V-012M-2@3-●-Δ-∇
D3V-013-2@3-●-Δ-∇
D3V-013M-2@3-●-Δ-∇
D3V-011-3@3-●-Δ-∇
D3V-011M-3@3-●-Δ-∇
D3V-012-3@3-●-Δ-∇
D3V-012M-3@3-●-Δ-∇
D3V-013-3@3-●-Δ-∇
D3V-013M-3@3-●-Δ-∇
Internal
External (M)
Internal
External (M)
D3V-014-1@3-●-Δ-∇
D3V-014M-1@3-●-Δ-∇
D3V-015-1@3-●-Δ-∇
D3V-015M-1@3-●-Δ-∇
D3V-014-2@3-●-Δ-∇
D3V-014M-2@3-●-Δ-∇
D3V-015-2@3-●-Δ-∇
D3V-015M-2@3-●-Δ-∇
D3V-014-3@3-●-Δ-∇
D3V-014M-3@3-●-Δ-∇
D3V-015-3@3-●-Δ-∇
D3V-015M-3@3-●-Δ-∇
Internal
External (M)
D3V-016-1@3-●-Δ-∇
D3V-016M-1@3-●-Δ-∇
D3V-016-2@3-●-Δ-∇
D3V-016M-2@3-●-Δ-∇
D3V-016-3@3-●-Δ-∇
D3V-016M-3@3-●-Δ-∇
SPDT
D3V-01-1@2-●-Δ-∇
Contact form
SPST-NC
D3V-01-2@2-●-Δ-∇
SPST-NO
D3V-01-3@2-●-Δ-∇
Hinge lever
Long hinge lever
Simulated roller lever
Short hinge roller lever
Hinge roller lever
01 A (OF: 25 gf)
Actuator
Pin plunger
Hinge position
(far from plunger)
---
• The @ in the model number is for the terminal code.
A:
Solder/quick-connect terminals (#187)
C2:
Quick-connect terminals (#187)
C:
Quick-connect terminals (#250)
C6
RAST5 terminals (#250)
• The ● in the model number is for the enclosure material
None: Standard
T:
High Temperature (200°C for D3V-6/-01, 155°C for D3V-11)
W2: EN60695-2-11/-12 conformity with PTI=250
• The Δ in the model number is for the mounting hole size.
None: 3.1 mm
K:
2.9 mm
• The ∇ in the model number is for the special code
None: Standard
H:
High Temperature (125°C)
E:
Special rating of 21A (8)A (for D3V-21 only)
Miniature Basic Switch
D3V
77
Specifications
■ Ratings
Type
D3V-21
D3V-16
D3V-11
D3V-6
D3V-01
Rated voltage
250 VAC
8 VDC
30 VDC
125 VDC
250 VDC
250 VAC
8 VDC
30 VDC
125 VDC
250 VDC
250 VAC
8 VDC
30 VDC
125 VDC
250 VDC
250 VAC
8 VDC
30 VDC
125 VDC
250 VDC
125 VAC
8 VDC
30 VDC
Non-inductive load
Resistive load
Lamp load
NC
NO
NC
NO
21 A
3A
21 A
5A
14 A
5A
0.6 A
0.1 A
0.3 A
0.05 A
16 A
2A
16 A
4A
10 A
4A
0.6 A
0.1 A
0.3 A
0.05 A
11 A
1.5 A
11 A
3A
6A
3A
0.6 A
0.1 A
0.3 A
0.05 A
6A
3A
6A
3A
6A
3A
0.4 A
0.1 A
0.3 A
0.05 A
0.1 A
--0.1 A
--0.1 A
Inductive load
Inductive load
Motor load
NC
NO
NC
NO
12 A
4A
12 A
7A
12 A
5A
0.6 A
0.1 A
0.3 A
0.05 A
10 A
3A
10 A
6A
10 A
4A
0.6 A
0.1 A
0.3 A
0.05 A
6A
2A
6A
3A
6A
3A
0.6 A
0.1 A
0.3 A
0.05 A
4A
--4A
4A
--0.4 A
0.2 A
-------
---
Note: 1. The above current values are the normal current values of models with a contact gap of 1 mm (gap F), which vary with the normal current
values of models with a contact gap of 0.5 mm (gap G).
2. Inductive load has a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
3. Lamp load has an inrush current of 10 times the steady-state current.
4. Motor load has an inrush current of 6 times the steady-state current.
5. The ratings values apply under the following test conditions: Ambient temperature: 20±2°C, Ambient humidity: 65±5%, Operating frequency: 30 operations/min
■ Approved Standards
UL1054 (File No. E41515)
CSA C22.2 No.55 (File No. LR21642)
(Only standard ratings are listed.)
Rated voltage
125 VAC
250 VAC
125 VDC
250 VDC
D3V-21G
D3V-16
3/4 HP
16 A, 1/2 HP
20.1 A, 3/4 HP 16 A, 1/2 HP
--0.6 A
--0.3 A
D3V-16G
16 A, 1/2 HP
16 A, 1/2 HP
0.1 A
---
D3V-11
11 A, 1/2 HP
11 A, 1/2 HP
0.6 A
0.3 A
D3V-11G
11 A, 1/2 HP
11 A, 1/2 HP
0.1 A
---
D3V-6
6 A, 1/4 HP
6 A, 1/4 HP
-----
D3V-6G
6 A, 1/4 HP
6 A, 1/4 HP
-----
D3V-01
0.1 A
-------
EN 61058-1: 1992+A1: 1993 (License No. 119151L)
Rated voltage
125 VAC
250 VAC
250 VAC
D3V-21G
--20 (4) A
21 (8) A**
D3V-16
--16 (3) A
D3V-11
--11 (3) A
D3V-6
--6 (2) A
D3V-01
0.1 A
---
Testing conditions: 50,000 operations, T85 (0°C to 85°C) for D3V-21/D3V-01, T105 (0°C to 105°C) for D3V-16/D3V-11/D3V-6 and T200
(0 to 200°C) for D3V-6/-01 with suffix “T”, T155 (0 to 155°C) for D3V-11 with suffix “T”.
**Testing conditions: 10,000 operations, T85 (0°C to 85°C)
EN 60695-2-11 Ed.2, EN 60695-2-12 Ed.2 - - Glow-wire flammability test methods
Rated voltage
125 VAC
250 VAC
78
D3V-16
--16 (3) A
Miniature Basic Switch
D3V-11
--11 (3) A
D3V
D3V-6
--6 (2) A
D3V-01
0.1 A
---
■ Characteristics
Operating speed
Operating frequency
0.1 mm to 1 m/s (plunger models)
Mechanical: 600 operations/min
Electrical: 60 operations/min
100 MΩ min. (at 500 VDC)
D3V-21:
Insulation resistance
Contact resistance
Dielectric strength (see note 2)
Vibration resistance (see note 3)
Shock resistance (see note 3)
Life expectancy
30 mΩ max.
D3V-01, 50 gf versions:
50 mΩ max.
25 gf versions:
100 mΩ max.
1,000 VAC, 50/60 Hz for 1 min between terminals of the same polarity
2,000 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground, and between
each terminal and non-current-carrying metal parts
Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Destruction: 400 m/s2 (approx. 40G) max.
Malfunction: 100 m/s2 (approx. 10G) max.
Mechanical: 10,000,000 operations min.
Electrical: D3V-21:
Degree of protection
Degree of protection against electric shock
Proof tracking index (PTI)
Ambient operating temperature
50 mΩ max.
D3V-16, D3V-11, D3V-6:
50,000 operations min.
D3V-16:
100,000 operations min.
D3V-11:
200,000 operations min.
D3V-6, D3V-01:
500,000 operations min.
IEC IP40
Class I
250 (High Temperature type with suffix “-T”: 175)
D3V-21: -25°C to 85°C with no icing
D3V-16:
-25°C to 105°C (High Temperature type “H”: -25°C to 125°C) with no icing
D3V-11:
-25°C to 105°C (High Temperature types “H”: -25°C to 125°C, “T”: -25°C to 155°C) with no icing
D3V-6:
-25°C to 105°C (High Temperature types “H”: -25°C to 125°C, “T”: -25°C to 200°C) with no icing
D3V-01: -25°C to 85°C (High Temperature type “T”: -25°C to 200°C) with no icing
85% max. (for 5°C to 35°C)
Approx. 6.2 g (plunger models)
Ambient operating humidity
Weight
Note: 1. Data shown are of initial value.
2. The dielectric strength values shown in the table are for models with a Separator.
3. For plunger models, the above values apply for use at both the free position and total travel position. For lever models, they apply at the
total travel position.
4. For testing conditions, contact your OMRON sales representative.
■ Contact Specifications
Item
Contact
D3V-21
D3V-16
D3V-11
Specification
Material
Gap
(standard value)
Inrush current
NC
NO
0.5 mm
D3V-6
D3V-01
Rivet
Crossbar
Silver alloy
Gold alloy
1 mm (F gap type) or 0.5 mm (G gap type)
50 A max.
Minimum applicable load
40 A max.
24 A max.
1.0 mm
15 A max.
---
160 mA at 5 VDC
1 mA at 5 VDC
Note: Minimum applicable loads are indicated by N standard reference values. This value represents the failure rate at a 60% (λ60) reliability level
(JIS C5003). The equation λ60=0.5 x 10-6 / operations indicates that a failure rate of 1/2,000,000 operations can be expected at a reliability
level of 60%
■ Contact Form
SPDT
SPST-NC
NC
SPST-NO
NC
NO
NO
COM
COM
COM
Miniature Basic Switch
D3V
79
Dimensions
■ Terminals
Note: Unless otherwise specified, all units are in millimeters and a tolerance of ±0.4 mm applies to all dimensions
Terminal
type
Solder Terminal
(A)
Quick-connect Terminal
(#187) (C2)
Quick-connect Terminal
(#250) (C)
Quick-connect RAST5
Terminals (#250)(C6)
COM
16.8
(5.5)
(5.5)
(4.9)
(6.5)
(6.5)
(7.7)
2.9
3.2
2.9
t = 0.5 (10)
Three, solder terminals
Terminal
dimensions
t=0.8
Three quick connect
terminals (#250)
(12.0)
t = 0.8 Three, quick-connect
terminals (#250)
8
6.35
3.2
4.75±0.1
5 15.2
12.8
t = 0.5 (10)
Three, quick-connect
terminals (#187)
6.35
3.2 (see note)
(3.5)
4.5
3.95
4.75±0.1
6.35±0.1
6.3±0.1
1.6-dia. terminal hole
2.4 dia. 1.6 dia.
Note: Indicates the length to the
center of the 1.6-dia. holes
1.75-dia. terminal hole
1.65-dia. terminal hole
Note: The table above is for the SPDT contact specifications. Two terminals will be available for SPST-NO or SPST-NC contact specifications. For
terminal positions, refer to the above Contact Form.
■ Mounting Holes
Two, 3.1-dia. mounting holes or
M3 screw holes
All switches may be panel mounted using M3 mounting screws with
plane washers or spring washers to securely mount the switch.
Tighten the screws to a torque of 0.39 to 0.59 N·m.
10.3±0.1
22.2±0.1
■ Dimensions and Operating Characteristics
➡
Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of ±0.4 mm applies to all dimensions
2. The following illustrations and drawings are for quick-connect terminals (#187) (terminals C2). D3V models also incorporate terminals A, C, and
C6, which are omitted from the following drawings. Refer to Terminals section for the dimensions of these terminals.
3. The @ in the model number is for the terminal code.
4. The Δ in the model number is for combinations of the enclosure material, the mounting hole size and the special code as indicated in the Model
Number Legend and Available Combinations tables. The hole size in the following illustrations of models with a suffix “K” in the Δ is 2.9 mm.
5. The operating characteristics are for operation in the A direction (
).
Plunger Models
A
Model
OF max.
RF min.
PT max.
OT min.
MD max.
OP
80
➡
D3V-21G-1@4A-Δ
D3V-16-1@5-Δ
D3V-11-1@5-Δ
D3V-11-1@4-Δ
D3V-6-1@4-Δ
D3V-6G-1@3-Δ
D3V-01-1@2-Δ
D3V-01-1@3-Δ
t=0.5
Three, quick-connect
terminals (#187)
D3V-21G-1@4A-Δ
125 gf
20 gf
1.2 mm
1.0 mm
0.3 mm
D3V-16-1@5-Δ
D3V-11-1@5-Δ
200 gf
50 gf
Miniature Basic Switch
D3V-11-1@4-Δ
D3V-6G-1@3-Δ
D3V-6-1@4-Δ
100 gf
50 gf
15 gf
5 gf
1.2 mm
1.0 mm
0.4 mm (F gap type) or 0.3 mm (G gap type)
14.7±0.4 mm
D3V
D3V-01-1@3-Δ
D3V-01-1@2-Δ
50 gf
5 gf
25 gf
3 gf
1.2 mm
1.0 mm
0.4 mm
Short Hinge Lever Models
22.1
3.1+0.13
−0.03 dia. hole 1.6
t=0.5
8.1
0.7
2.85
4.2
PT
2.8
4
18.7
A
➡
D3V-21G1-1@4A-Δ
D3V-161-1@5-Δ
D3V-111-1@5-Δ
D3V-111-1@4-Δ
D3V-61-1@4-Δ
D3V-6G1-1@3-Δ
D3V-011-1@3-Δ
OP
10.3±0.1
15.9 7.2
3.4±0.15 dia. hole
22.2±0.1
27.8
37.8±0.8
2.8
(10)
t=0.5
Three, #187 series tab
3.1+0.13
−0.03
10.3
D3V-21G1M-1@4A-Δ
D3V-161M-1@5-Δ
D3V-111M-1@5-Δ
D3V-111M-1@4-Δ
D3V-61M-1@4-Δ
D3V-6G1M-1@3-Δ
D3V-011M-1@3-Δ
A
➡
t=0.5
Three, quick-connect
terminals (#187)
Note: Stainless-steel lever
D3V-21G1(M)-1@4A-Δ
D3V-161(M)-1@5-Δ
D3V-111(M)-1@5-Δ
D3V-111(M)-1@4-Δ
D3V-61(M)-1@4-Δ
OF max.
RF min.
125 gf
20 gf
200 gf
50 gf
100 gf
15 gf
PT max.
OT min.
MD max.
1.6 mm
0.8 mm
0.5 mm
Model
D3V-011(M)-1@3-Δ
50 gf
5 gf
1.6 mm
0.8 mm
0.6 mm (F gap type) or 0.5 mm (G gap type)
1.6 mm
0.8 mm
0.6 mm
15.2 ± 0.5 mm
OP
3.1+0.13
−0.03 dia. hole
27.9±0.8
14.3
t=0.5
8.5
A
PT
2.85
4.5
0.7
2.8
4
18.7
10.3±0.1
15.9 7.2
OP
+0.13
t=0.5
Three, #187 series tab
2.8
(10)
D3V-21G1K-1@4A-Δ
D3V-161K-1@5-Δ
D3V-111K-1@5-Δ
D3V-111K-1@4-Δ
D3V-61K-1@4-Δ
OF max.
RF min.
85 gf
8 gf
130 gf
16 gf
65 gf
8 gf
PT max.
OT min.
MD max.
3.5 mm
1.1 mm
1.1 mm
Model
1.6
➡
D3V-21G1K-1@4A-Δ
D3V-161K-1@5-Δ
D3V-111K-1@5-Δ
D3V-111K-1@4-Δ
D3V-61K-1@4-Δ
D3V-6G1K-1@3-Δ
D3V-011K-1@3-Δ
OP
D3V-6G1(M)-1@3-Δ
3.4±0.15 dia. hole
22.2±0.1
3.1−0.03
10.3
27.8
37.8±0.8
D3V-6G1K-1@3-Δ
D3V-011K-1@3-Δ
35 gf
4 gf
3.5 mm
1.1 mm
1.2 mm (F gap type) or 1.1 mm (G gap type)
3.5 mm
1.1 mm
1.2 mm
15.2 ± 1.2 mm
Miniature Basic Switch
D3V
81
Hinge Lever Models
A
➡
D3V-21G2-1@4A-Δ
D3V-162-1@5-Δ
D3V-112-1@5-Δ
D3V-112-1@4-Δ
D3V-62-1@4-Δ
D3V-6G2-1@3-Δ
D3V-012-1@3-Δ
35.6±0.8
3.1+0.13
−0.03 dia. hole 1.6
t=0.5
0.7
2.85 4.2
2.8
4
18.8
PT
8.1
OP
10.3±0.1
15.9 7.2
2.8
(10)
t=0.5
Three, #187 series tab
3.4±0.15 dia. hole
22.2±0.1
27.8
37.8±0.8
3.1+0.13
−0.03
10.3
A
➡
D3V-21G2M-1@4A-Δ
D3V-162M-1@5-Δ
D3V-112M-1@5-Δ
D3V-112M-1@4-Δ
D3V-62M-1@4-Δ
D3V-6G2M-1@3-Δ
D3V-012M-1@3-Δ
t=0.5
Three, quick-connect
terminals (#187)
Note: Stainless-steel lever
D3V-21G2(M)-1@4A-Δ
D3V-162(M)-1@5-Δ
D3V-112(M)-1@5-Δ
OF max.
RF min.
80 gf
6 gf
125 gf
14 gf
PT max.
OT min.
MD max.
4.0 mm
1.6 mm
0.8 mm
Model
D3V-112(M)-1@4-Δ
D3V-62(M)-1@4−Δ
D3V-012(M)-1@3-Δ
60 gf
6 gf
30 gf
---
4.0 mm
1.6 mm
1.5 mm (F gap type) or 0.8 mm (G gap type)
4.0 mm
1.6 mm
1.5 mm
15.2 ± 1.2 mm
OP
D3V-21G2K-1@4A-Δ
D3V-162K-1@5-Δ
D3V-112K-1@5-Δ
D3V-112K-1@4-Δ
D3V-62K-1@4-Δ
D3V-6G2K-1@3-Δ
D3V-012K-1@3-Δ
A
1.6
0.7
18.7
2.8
(10)
D3V-162K-1@5-Δ
D3V-112K-1@5-Δ
D3V-112K-1@4-Δ
D3V-62K-1@4-Δ
OF max.
RF min.
45 gf
4 gf
70 gf
8 gf
35 gf
4 gf
PT max.
OT min.
MD max.
6.0 mm
2.5 mm
1.3 mm
15.2 ± 2.0 mm
Miniature Basic Switch
3.4±0.15 dia. hole
22.2±0.1
D3V
PT
2.85
4.5
3.1+0.13
−0.03
10.3
27.8
37.8±0.8
D3V-6G2K-1@3-Δ
6.0 mm
2.5 mm
2.0 mm (F gap type) or 1.3 mm (G gap type)
OP
t=0.5
2.8
10.3±0.1 OP
4
15.9 7.2
D3V-21G2K-1@4A-Δ
Model
41.4±0.8
14.3
8.5
➡
3.1 +0.13
−0.03 dia. hole
t=0.5
Three, #187 series tab
82
D3V-6G2(M)-1@3-Δ
D3V-012K-1@3-Δ
20 gf
--6.0 mm
2.5 mm
2.0 mm
Long Hinge Lever Models
D3V-21G3-1@4A-Δ
D3V-163-1@5-Δ
D3V-113-1@5-Δ
D3V-113-1@4-Δ
D3V-63-1@4-Δ
D3V-6G3-1@3-Δ
D3V-013-1@3-Δ
A
➡
3.1+0.13
−0.03 dia. hole
59.4±0.8
1.6
8.1
0.7
2.85 4.2
PT
t=0.5
2.8
4
15.9 7.2
18.7
10.3±0.1
OP
+0.13
3.1−0.03
3.4±0.15 dia. hole
22.2±0.1
27.8
2.8
(10)
t=0.5
Three, #187 series tab
10.3
37.8±0.8
D3V-21G3M-1@4A-Δ
D3V-163M-1@5-Δ
D3V-113M-1@5-Δ
D3V-113M-1@4-Δ
D3V-63M-1@4-Δ
D3V-6G3M-1@3-Δ
D3V-013M-1@3-Δ
A
➡
t=0.5
Three, quick-connect
terminals (#187)
Note: Stainless-steel lever
D3V-21G3(M)-1@4A-Δ
D3V-163(M)-1@5-Δ
D3V-113(M)-1@5-Δ
OF max.
RF min.
45 gf
3 gf
70 gf
6 gf
PT max.
OT min.
MD max.
9.0 mm
2.0 mm
2.0 mm
Model
D3V-113(M)-1@4-Δ
D3V-6G3(M)-1@3-Δ D3V-013(M)-1@3-Δ
D3V-63(M)-1@4-Δ
35 gf
---
20 gf
---
15.2 ± 2.6 mm
+2.6
15.2 −3.2 mm
OP
9.0 mm
3.2 mm
2.8 mm
9.0 mm
9.0 mm
2.0 mm
3.2 mm
2.8 mm (F gap type) or 2.0 mm (G gap type) 2.8 mm (F gap type) or 2.0 mm (G gap type)
A
3.1+0.13
−0.03 dia. hole 1.6
65.2±0.8
14.3
t=0.5
8.5
➡
D3V-21G3K-1@4A-Δ
D3V-163K-1@5-Δ
D3V-113K-1@5-Δ
D3V-113K-1@4-Δ
D3V-63K-1@4-Δ
D3V-6G3K-1@3-Δ
D3V-013K-1@3-Δ
2.85 4.5
PT
0.7
2.8
OP
10.3±0.1
4
15.9 7.2
18.7
2.8
t=0.5
Three, #187 series tab
3.4±0.15 dia. hole
22.2±0.1
(10)
3.1+0.13
−0.03
10.3
27.8
37.8±0.8
D3V-21G3K-1@4A-Δ
D3V-163K-1@5-Δ
D3V-113K-1@5-Δ
D3V-113K-1@4-Δ
D3V-63K-1@4-Δ
OF max.
RF min.
20 gf
---
35 gf
4 gf
20 gf
---
PT max.
OT min.
MD max.
15.0 mm
4.0 mm
3.0 mm
Model
OP
D3V-6G3K-1@3-Δ
D3V-013K-1@3-Δ
10 gf
---
15.0 mm
4.0 mm
3.8 mm (F gap type) or 3.0 mm (G gap type)
15.0 mm
4.0 mm
3.8 mm
15.2 ± 3.0 mm
Miniature Basic Switch
D3V
83
Simulated Roller Lever Models
A
32.5±0.8
+0.13
3.1−0.03 dia. hole
1.6
➡
D3V-21G4-1@4A-Δ
D3V-164-1@5-Δ
D3V-114-1@5-Δ
D3V-114-1@4-Δ
D3V-64-1@4-Δ
D3V-6G4-1@3-Δ
D3V-014-1@3-Δ
8.1
0.7
2.8
4
18.8
2.85 4.2
PT
t=0.5
10.3±0.1
15.9 7.2
2.8
(10)
t=0.5
Three, #187 series tab
3.4±0.15 dia. hole
OP
3.1+0.13
−0.03
10.3
22.2±0.1
27.8
37.8±0.8
D3V-21G4M-1@4A-Δ
D3V-164M-1@5-Δ
D3V-114M-1@5-Δ
D3V-114M-1@4-Δ
D3V-64M-1@4-Δ
D3V-6G4M-1@3-Δ
D3V-014M-1@3-Δ
➡
A
t=0.5
Three, quick-connect
terminals (#187)
Note: Stainless-steel lever
D3V-21G4(M)-1@4A-Δ
D3V-164(M)-1@5-Δ
D3V-114(M)-1@5-Δ
D3V-114(M)-1@4-Δ
D3V-64(M)-1@4-Δ
OF max.
RF min.
85 gf
7 gf
125 gf
14 gf
60 gf
6 gf
PT max.
OT min.
MD max.
4.0 mm
1.6 mm
1.4 mm
Model
D3V-6G4(M)-1@3-Δ
30 gf
---
4.0 mm
1.6 mm
1.5 mm (F gap type) or 0.8 mm (G gap type)
D3V-21G4K-1@4A-Δ
D3V-164K-1@5-Δ
D3V-114K-1@5-Δ
D3V-114K-1@4-Δ
D3V-64K-1@4-Δ
D3V-6G4K-1@3-Δ
D3V-014K-1@3-Δ
A
38.4±0.8
1.6
0.7
14.3
8.5
18.7
2.8
7.2
2.8
(10)
3.4±0.15 dia. hole
22.2±0.1
27.8
37.8±0.8
D3V-164K-1@5-Δ
D3V-114K-1@5-Δ
D3V-114K-1@4-Δ
D3V-64K-1@4-Δ
OF max.
RF min.
55 gf
3 gf
75 gf
10 gf
40 gf
3 gf
PT max.
OT min.
MD max.
8.0 mm
1.5 mm
3.0 mm
8.0 mm
1.5 mm
3.5 mm (F gap type) or 3.0 mm (G gap type)
18.7 ± 1.2 mm
Miniature Basic Switch
D3V
OP
10.3±0.1
D3V-21G4K-1@4A-Δ
OP
2.85 4.5
PT
t=0.5
4
15.9
➡
+0.13
3.1−0.03 dia. hole
t=0.5
Three, #187 series tab
84
4.0 mm
1.6 mm
1.5 mm
18.7 ± 1.2 mm
OP
Model
D3V-014(M)-1@3-Δ
+0.13
3.1−0.03
10.3
D3V-6G4K-1@3-Δ
D3V-014K-1@3-Δ
20 gf
--8.0 mm
1.5 mm
3.5 mm
Short Hinge Roller Lever Models
D3V-21G5-1@4A-Δ
D3V-165-1@5-Δ
D3V-115-1@5-Δ
D3V-115-1@4-Δ
D3V-65-1@4-Δ
D3V-6G5-1@3-Δ
D3V-015-1@3-Δ
A
8.1
0.7
➡
20.1±0.8
+0.13
3.1−0.03 dia. hole 1.6
4.8
2.8
OP
10.3±0.1
4
15.9 7.2
18.8
3.1+0.13
−0.03
3.4±0.15 dia. hole
22.2±0.1
27.8
37.8±0.8
2.8
(10)
t=0.5
Three, #187 series tab
10.3
A
➡
D3V-21G5M-1@4A-Δ
D3V-165M-1@5-Δ
D3V-115M-1@5-Δ
D3V-115M-1@4-Δ
D3V-65M-1@4-Δ
D3V-6G5M-1@3-Δ
D3V-015M-1@3-Δ
t=0.5
Three, quick-connect
terminals (#187)
D3V-21G5(M)-1@4A-Δ
D3V-165(M)-1@5-Δ
D3V-115(M)-1@5-Δ
D3V-115(M)-1@4-Δ
D3V-65(M)-1@4-Δ
OF max.
RF min.
145 gf
20 gf
240 gf
50 gf
120 gf
15 gf
PT max.
OT min.
MD max.
1.6 mm
0.8 mm
0.5 mm
Model
5.1
PT
t=0.5
Note: 1. Stainless-steel lever
2. Oilless polyacetar resin roller
D3V-6G5(M)-1@3-Δ
D3V-015(M)-1@3-Δ
60 gf
6 gf
1.6 mm
0.8 mm
0.6 mm (F gap type) or 0.5 mm (G gap type)
OP
1.6 mm
0.8 mm
0.6 mm
20.7±0.6 mm
D3V-21G5K-1@4A-Δ
D3V-165K-1@5-Δ
D3V-115K-1@5-Δ
D3V-115K-1@4-Δ
D3V-65K-1@4-Δ
D3V-6G5K-1@3-Δ
D3V-015K-1@3-Δ
A
dia. hole 1.6
25.9±0.8
14.3
t=0.5
8.5
➡
+0.13
3.1−0.03
PT
5.1
0.7
2.8 OP
4
18.8
10.3±0.1
15.9 7.2
+0.13
t=0.5
Three, #187 series tab
2.8
(10)
3.4±0.15 dia. hole
22.2±0.1
27.8
37.8±0.8
D3V-21G5K-1@4A-Δ
D3V-165K-1@5-Δ
D3V-115K-1@5-Δ
D3V-115K-1@4-Δ
D3V-65K-1@4-Δ
OF max.
RF min.
100 gf
8 gf
160 gf
15 gf
80 gf
8 gf
PT max.
OT min.
MD max.
2.6 mm
1.0 mm
8.0 mm
Model
OP
3.1−0.03
10.3
D3V-6G5K-1@3-Δ
D3V-015K-1@3-Δ
40 gf
4 gf
2.6 mm
1.0 mm
0.9 mm (F gap type) or 0.8 mm (G gap type)
2.6 mm
1.0 mm
0.9 mm
20.7 ± 1.0 mm
Miniature Basic Switch
D3V
85
Hinge Roller Lever Models
D3V-21G6-1@4A-Δ
D3V-166-1@5-Δ
D3V-116-1@5-Δ
D3V-116-1@4-Δ
D3V-66-1@4-Δ
D3V-6G6-1@3-Δ
D3V-016-1@3-Δ
➡
A
33.0±0.8
+0.13
3.1−0.03 dia. hole
1.6
5.1
PT
4.8
t=0.5
8.1
0.7
2.8
OP
10.3±0.1
4
15.9 7.2
18.7
+0.13
2.8
(10)
t=0.5
Three, #187 series tab
3.1−0.03
3.4±0.15 dia. hole
10.3
22.2±0.1
27.8
37.8±0.8
D3V-21G6M-1@4A-Δ
D3V-166M-1@5-Δ
D3V-116M-1@5-Δ
D3V-116M-1@4-Δ
D3V-66M-1@4-Δ
D3V-6G6M-1@3-Δ
D3V-016M-1@3-Δ
➡
A
t=0.5
Three, quick-connect
terminals (#187)
D3V-21G6(M)-1@4A-Δ
D3V-166(M)-1@5-Δ
D3V-116(M)-1@5-Δ
D3V-116(M)-1@4-Δ
D3V-66(M)-1@4-Δ
OF max.
RF min.
80 gf
5 gf
125 gf
14 gf
60 gf
6 gf
PT max.
OT min.
MD max.
4.0 mm
1.6 mm
0.8 mm
Model
Note: 1. Stainless-steel lever
2. Oilless polyacetar resin roller
D3V-6G6(M)-1@3-Δ
D3V-016(M)-1@3-Δ
30 gf
---
4.0 mm
1.6 mm
1.5 mm (F gap type) or 0.8 mm (G gap type)
OP
4.0 mm
1.6 mm
1.5 mm
20.7±1.2 mm
+0.13
3.1−0.03 dia. hole
1.6
➡
A
D3V-21G6K-1@4A-Δ
D3V-166K-1@5-Δ
D3V-116K-1@5-Δ
D3V-116K-1@4-Δ
D3V-66K-1@4-Δ
D3V-6G6K-1@3-Δ
D3V-016K-1@3-Δ
39.8±0.8
14.3
8.5
PT
5.1
t=0.5
0.7
2.8
4
10.3±0.1
15.9 7.2
18.8
OP
+0.13
t=0.5
Three, #187 series tab
2.8
(10)
3.4±0.15 dia. hole
22.2±0.1
27.8
37.8±0.8
D3V-21G6K-1@4A-Δ
D3V-166K-1@5-Δ
D3V-116K-1@5-Δ
D3V-116K-1@4-Δ
D3V-66K-1@4-Δ
OF max.
RF min.
50 gf
3 gf
75 gf
10 gf
40 gf
3 gf
PT max.
OT min.
MD max.
7.2 mm
2.0 mm
2.0 mm
Model
7.2 mm
2.0 mm
2.7 mm (F gap type) or 2.0 mm (G gap type)
20.7 ± 2.2 mm
OP
86
Miniature Basic Switch
D3V
3.1−0.03
10.3
D3V-6G6K-1@3-Δ
D3V-016K-1@3-Δ
20 gf
--7.2 mm
2.0 mm
2.7 mm
Precautions
Be sure to read the precautions and information common to all Snap Action and Detection Switches, contained in the Technical User’s Guide,
“Snap Action Switches, Technical Information” for correct use.
■ Correct Use
■ Cautions
Mounting Direction
Handling
Mount lever-operated switches with a maximum operating force of
0.49 N in a direction where the actuator weight will not be applied to
the switch. Since the switch is designed for a small load, its resetting
force is small. Therefore, resetting failure may occur if unnecessary
load is applied to the switch.
Be careful not to drop the switch. Doing so may cause damage to the
switch’s internal components because it is designed for a small load.
Insulation Distance
According to EN61058-1, the minimum insulation thickness for this
switch should be 1.1 mm and minimum clearance distance between
the terminal and mounting plate should be 1.9 mm. If the insulation
distance cannot be provided in the product incorporating the switch,
either use a switch with insulation barrier or use a Separator to
ensure sufficient insulation distance.
Using Microloads
Voltage (V)
Using a model for ordinary loads to switch microloads may result in
faulty operation. Instead, use the models that are designed for
microloads and that operate in the following range;
Operating range
for micro load
models D3V-01
Operating
range for
generalload models
Inoperable
range
Current (mA)
However, even when using microload models within the operating
range shown above, if inrush current or inductive voltage spikes
occur when the contact is opened or closed, then contact wear may
increase and so decrease the service life. Therefore, insert a contact
protection circuit where necessary.
Solder Terminal Approval Conditions
Use of soldering iron for normal soldering is acceptable.
Soldering hook holes version available.
Soldering terminal types 1 and 2 are met.
Miniature Basic Switch
D3V
87
MEMO
88
Miniature Basic Switch
D3V
Omron Electronic Components, LLC
Terms and Conditions of Sales
I. GENERAL
1. Definitions: The words used herein are defined as follows.
(a) Terms:
These terms and conditions
(b) Seller:
Omron Electronic Components LLC and its subsidiaries
(c) Buyer:
The buyer of Products, including any end user in section III through VI
(d) Products: Products and/or services of Seller
(e) Including: Including without limitation
2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,
invoices, purchase orders and other documents, whether electronic or in writing, relating
to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's
purchase order or other documents which are inconsistent with, or in addition to, these
Terms.
3. Distributor: Any distributor shall inform its customer of the contents after and including
section III of these Terms.
II. SALES
1. Prices; Payment: All prices stated are current, subject to change without notice by Seller.
Buyer agrees to pay the price in effect at the time the purchase order is accepted by
Seller. Payments for Products received are due net 30 days unless otherwise stated in
the invoice. Buyer shall have no right to set off any amounts against the amount owing in
respect of this invoice.
2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to
Buyer after deducting transportation charges, taxes and duties, and will be allowed only
if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past
due amounts owing to Seller.
3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum
legal rate, whichever is less, on any balance not paid within the stated terms.
4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.
5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer
shall make remittance to Seller at the then current exchange rate most favorable to
Seller; provided that if remittance is not made when due, Buyer will convert the amount
to U.S. dollars at the then current exchange rate most favorable to Seller available
during the period between the due date and the date remittance is actually made.
6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining
any government approvals regarding the importation or sale of the Products.
7. Taxes: All taxes, duties and other governmental charges (other than general real
property and income taxes), including any interest or penalties thereon, imposed directly
or indirectly on Seller or required to be collected directly or indirectly by Seller for the
manufacture, production, sale, delivery, importation, consumption or use of the Products
sold hereunder (including customs duties and sales, excise, use, turnover and license
taxes) shall be charged to and remitted by Buyer to Seller.
8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller,
Seller reserves the right to stop shipments or require satisfactory security or payment in
advance. If Buyer fails to make payment or otherwise comply with these Terms or any
related agreement, Seller may (without liability and in addition to other remedies) cancel
any unshipped portion of Products sold hereunder and stop any Products in transit until
Buyer pays all amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid
accounts.
9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer
indemnifies Seller fully against all costs or expenses arising in connection therewith.
10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from
causes beyond its control, including earthquakes, fires, floods, strikes or other labor
disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots,
delay in or lack of transportation or the requirements of any government authority.
11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:
(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise
stated in writing by Seller), at which point title to and all risk of loss of the Products
shall pass from Seller to Buyer, provided that Seller shall retain a security interest in
the Products until the full purchase price is paid by Buyer;
(b) Delivery and shipping dates are estimates only; and
(c) Seller will package Products as it deems proper for protection against normal
handling and extra charges apply to special conditions.
12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products
occurring before delivery to the carrier or any claim related to pricing or other charges
must be presented in detail in writing to Seller within 30 days of receipt of shipment.
III. PRECAUTIONS
1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY
OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE
APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING
APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE
BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC
COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E)
SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT.
Buyer acknowledges that it alone has determined that the Products will meet their
requirements of the intended use in all cases. Buyer must know and observe all
prohibitions of use applicable to the Product/s.
2. Use with Attention: The followings are some examples of applications for which
particular attention must be given. This is not intended to be an exhaustive list of all
possible use of any Product, nor to imply that any use listed may be suitable for any
Product:
(a) Outdoor use, use involving potential chemical contamination or electrical
interference.
(b) Use in consumer Products or any use in significant quantities.
(c) Energy control systems, combustion systems, railroad systems, aviation systems,
medical equipment, amusement machines, vehicles, safety equipment, and
installations subject to separate industry or government regulations.
(d) Systems, machines, and equipment that could present a risk to life or property.
3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE
PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE
WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED
VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY
SELLER.
5. Programmable Products: Seller shall not be responsible for the Buyer's programming of
a programmable Product.
IV. WARRANTY AND LIMITATION
1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in
materials and workmanship for a period of twelve months from the date of sale by Seller
(or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY
OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES,
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE OF THE PRODUCTS.
2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form
originally shipped with Buyer responsible for labor charges for removal or replacement
thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an
amount equal to the purchase price of the Product; provided that there shall be no
liability for Seller or its affiliates unless Seller's analysis confirms that the Products were
correctly handled, stored, installed and maintained and not subject to contamination,
abuse, misuse or inappropriate modification. Return of any Products by Buyer must be
approved in writing by Seller before shipment.
3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED
WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,
WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL
LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF
THE PRODUCT ON WHICH LIABILITY IS ASSERTED.
4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its
employees from and against all liabilities, losses, claims, costs and expenses (including
attorney's fees and expenses) related to any claim, investigation, litigation or proceeding
(whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or
omissions under these Terms or in any way with respect to the Products.
V. INFORMATION; ETC.
1. Intellectual Property: The intellectual property embodied in the Products is the exclusive
property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way
without the written permission of Seller. Buyer (at its own expense) shall indemnify and
hold harmless Seller and defend or settle any action brought against Seller to the extent
that it is based on a claim that any Product made to Buyer specifications infringed
intellectual property rights of another party.
2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or
tooling, all engineering and tooling shall remain the exclusive property of Seller. All
information and materials supplied by Seller to Buyer relating to the Products are
confidential and proprietary, and Buyer shall limit distribution thereof to its trusted
employees and strictly prevent disclosure to any third party.
3. Performance Data: Performance data is provided as a guide in determining suitability
and does not constitute a warranty. It may represent the result of Seller's test conditions,
and the users must correlate it to actual application requirements.
4. Change In Specifications: Product specifications and descriptions may be changed at
any time based on improvements or other reasons. It is Seller’s practice to change part
numbers when published ratings or features are changed, or when significant
engineering changes are made. However, some specifications of the Product may be
changed without any notice.
5. Errors And Omissions: The information on Seller’s website or in other documentation
has been carefully checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses
regarding (a) export of the Products or information provided by Seller; (b) sale of
Products to forbidden or other proscribed persons or organizations; (c) disclosure to noncitizens of regulated technology or information.
VI. MISCELLANEOUS
1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing
between Buyer and Seller shall operate as a waiver of rights by Seller.
2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent.
3. Law: These Terms are governed by Illinois law (without regard to conflict of laws).
Federal and state courts in Cook County, Illinois have exclusive jurisdiction for any
dispute hereunder.
4. Amendment: These Terms constitute the entire agreement between Buyer and Seller
relating to the Products, and no provision may be changed or waived unless in writing
signed by the parties.
5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall
not invalidate any other provision.
Miniature Basic Switch
D3V
Certain Precautions on Specifications and Use
1. Suitability for Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in
Buyer's application or use of the Product. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not
sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use.
Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer
shall take application responsibility in all cases but the following is a nonexhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to separate industry or government
regulations.
(iii) Use in consumer products or any use in significant quantities.
(iv) Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to this
product.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
2. Programmable Products. Seller shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
3. Performance Data. Performance data given in this publication is provided as
a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must
correlate it to actual application requirements. Actual performance is subject to
Seller's Warranty and Limitations of Liability.
4. Change in Specifications. Product specifications and accessories may be
changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Seller representative at any time to
confirm actual specifications of purchased Product.
5. Errors and Omissions. The information in this publication has been carefully
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors, or omissions.
6. RoHS Compliance. Where indicated, our products currently comply, to the
best of our knowledge as of the date of this publication, with the requirements
of the European Union's Directive on the Restriction of certain Hazardous
Substances ("RoHS"), although the requirements of RoHS do not take effect
until July 2006. These requirements may be subject to change. Please consult
our website for current information.
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
OMRON ON-LINE
OMRON ELECTRONIC
COMPONENTS LLC
Global - http://www.omron.com
USA - http://www.components.omron.com
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
Cat. No. X303-E-1
11/09
Miniature Basic Switch
Specifications subject to change without notice
D3V
Printed in USA