DOMINANT Semiconductors DomiLED – AlInGaP : DDx-xRS • High brightness surface mount LED. • 120° viewing angle. • Small package outline (LxWxH) of 2.8 x 3.2 x 1.8 mm. • Qualified according to JEDEC moisture sensitivity Level 2. • Compatible to both IR reflow soldering and TTW soldering. 18/08/05 DomiLED AlInGaP DDx-xRS - Catalogue-v4 Page 1 of 11 DOMINANT Semiconductors Part Ordering Number DDH-CRS-PQ2-1 • DDH-CRS-P1 • DDH-CRS-P2 • DDH-CRS-Q1 • DDH-CRS-Q2 Chip Technology / Color AlInGaP Hyper-red, 640nm Viewing Angle ° 120 DDH-SRS-QR2-1 • DDH-SRS-Q1 • DDH-SRS-Q2 • DDH-SRS-R1 • DDH-SRS-R2 DDS-CRS-PQ2-1 • DDS-CRS-P1 • DDS-CRS-P2 • DDS-CRS-Q1 • DDS-CRS-Q2 ** Not for new design. Luminous Intensity @ IF=20mA Iv (mcd) 45.0 – 112.5 45.0 – 56.0 56.0 – 71.5 71.5 – 90.0 90.0 – 112.5 71.5 – 180.0 71.5 – 90.0 90.0 – 112.5 112.5 – 140.0 140.0 – 180.0 AlInGaP Super-red, 632nm 120 45.0 – 112.5 45.0 – 56.0 56.0 – 71.5 71.5 – 90.0 90.0 – 112.5 DDS-CRS-QR2-1 • DDS-CRS-Q1 • DDS-CRS-Q2 • DDS-CRS-R1 • DDS-CRS-R2 71.5 – 180.0 71.5 – 90.0 90.0 – 112.5 112.5 – 140.0 140.0 – 180.0 DDS-SRS-QR2-1 • DDS-SRS-Q1 • DDS-SRS-Q2 • DDS-SRS-R1 • DDS-SRS-R2 71.5 – 180.0 71.5 – 90.0 90.0 – 112.5 112.5 – 140.0 140.0 – 180.0 DDR-CRS-QR2-1 • DDR-CRS-Q1 • DDR-CRS-Q2 • DDR-CRS-R1 • DDR-CRS-R2 ** Not for new design. AlInGaP Red, 625nm 120 71.5 – 180.0 71.5 – 90.0 90.0 – 112.5 112.5 – 140.0 140.0 – 180.0 DDR-CRS-RS2-1 • DDR-CRS-R1 • DDR-CRS-R2 • DDR-CRS-S1 • DDR-CRS-S2 112.5 – 285.0 112.5 – 140.0 140.0 – 180.0 180.0 – 224.0 224.0 – 285.0 DDR-SRS-RS2-1 • DDR-SRS-R1 • DDR-SRS-R2 • DDR-SRS-S1 • DDR-SRS-S2 112.5 – 285.0 112.5 – 140.0 140.0 – 180.0 180.0 – 224.0 224.0 – 285.0 18/08/05 DomiLED AlInGaP DDx-xRS - Catalogue-v4 Page 2 of 11 DOMINANT Semiconductors Part Ordering Number Chip Technology / Color Viewing Angle DDR-TRS-TU2-1 • DDR-TRS-T1 • DDR-TRS-T2 • DDR-TRS-U1 • DDR-TRS-U2 Ts AlInGaP Red, 625nm 120 DDA-CRS-RS2-1 • DDA-CRS-R1 • DDA-CRS-R2 • DDA-CRS-S1 • DDA-CRS-S2 As AlInGaP Amber, 615nm 120 DDA-SRS-ST2-1 • DDA-SJS-S1 • DDA-SJS-S2 • DDA-SJS-T1 • DDA-SJS-T2 DDO-CRS-RS2-1 • DDO-CRS-R1 • DDO-CRS-R2 • DDO-CRS-S1 • DDO-CRS-S2 112.5 – 285.0 112.5 – 140.0 140.0 – 180.0 180.0 – 224.0 224.0 – 285.0 180.0 – 450.0 180.0 – 224.0 224.0 – 285.0 285.0 – 355.0 355.0 – 450.0 As AlInGaP Orange, 605nm 120 DDO-SRS-ST2-1 • DDO-SRS-S1 • DDO-SRS-S2 • DDO-SRS-T1 • DDO-SRS-T2 DDY-CRS-QR2-1 • DDY-CRS-Q1 • DDY-CRS-Q2 • DDY-CRS-R1 • DDY-CRS-R2 ** Not for new design Luminous Intensity @ IF=20mA Iv (mcd) 285.0 – 715.0 285.0 – 355.0 355.0 – 450.0 450.0 – 560.0 560.0 – 715.0 112.5 – 285.0 112.5 – 140.0 140.0 – 180.0 180.0 – 224.0 224.0 – 285.0 180.0 – 450.0 180.0 – 224.0 224.0 – 285.0 285.0 – 355.0 355.0 – 450.0 As AlInGaP Yellow, 587nm 120 71.5 – 180.0 71.5 – 90.0 90.0 – 112.5 112.5 – 140.0 140.0 – 180.0 DDY-CRS-RS2-1 • DDY-CRS-R1 • DDY-CRS-R2 • DDY-CRS-S1 • DDY-CRS-S2 112.5 – 285.0 112.5 – 140.0 140.0 – 180.0 180.0 – 224.0 224.0 – 285.0 DDY-SRS-ST2-1 • DDY-SRS-S1 • DDY-SRS-S2 • DDY-SRS-T1 • DDY-SRS-T2 180.0 – 450.0 180.0 – 224.0 224.0 – 285.0 285.0 – 355.0 355.0 – 450.0 18/08/05 DomiLED AlInGaP DDx-xRS - Catalogue-v4 Page 3 of 11 DOMINANT Semiconductors Part Ordering Number Chip Technology / Color Viewing Angle DDY-TRS-TU2-1 • DDY-TRS-T1 • DDY-TRS-T2 • DDY-TRS-U1 • DDY-TRS-U2 Ts AlInGaP Yellow, 590nm 120 DDG-CRS-PQ2-1 • DDG-CRS-P1 • DDG-CRS-P2 • DDG-CRS-Q1 • DDG-CRS-Q2 As AlInGaP Green, 572nm 120 DDG-SRS-QR2-1 • DDG-SRS-Q1 • DDG-SRS-Q2 • DDG-SRS-R1 • DDG-SRS-R2 Luminous Intensity @ IF=20mA Iv (mcd) 285.0 – 715.0 285.0 – 355.0 355.0 – 450.0 450.0 – 560.0 560.0 – 715.0 45.0 – 112.5 45.0 – 56.0 56.0 – 71.5 71.5 – 90.0 90.0 – 112.5 71.5 – 180.0 71.5 – 90.0 90.0 – 112.5 112.5 – 140.0 140.0 – 180.0 NOTE: 1. All part number above comes in a quantity of 2000 units per reel. 2. Other luminous intensity groups are also available upon request. 3. Luminous intensity is measured with an accuracy of ±11%. 4. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 5. An optional Vf binning is also available upon request. Binning scheme is as per following table. 18/08/05 DomiLED AlInGaP DDx-xRS - Catalogue-v4 Page 4 of 11 DOMINANT Semiconductors Wavelength Grouping. Color Group Wavelength distribution (nm) DDH; Hyper-red Full 636 - 646 DDS; Super-red Full 625 – 640 DDR-CJ, -SJ; Red (AS) Full 620 – 630 DDR-TJ; Red (TS) Full 620 - 635 DDA; Amber Full 610 – 621 W 610 – 615 X 615 – 621 Full 600 – 612 W 600 – 603 X 603 – 606 Y 606 - 609 Z 609 - 612 Full 582 – 594 W 582 – 585 X 585 – 588 Y 588 - 591 Z 591 - 594 Full 564.5 – 576.5 W 564.5 – 567.5 X 567.5 – 570.5 Y 570.5 – 573.5 Z 573.5 – 576.5 DDO; Orange DDY; Yellow DDG; Green Dominant wavelength is measured with an accuracy of ±1 nm. Electrical Characteristics at Ta=25°C. Vf @ If = 20mA Part Number Typ. (V) DDA, DDS, DDR-CJS, DDR-SJS, DDG Max. (V) Vr @ Ir = 100uA Min.(V) 2.1 2.3 12 2.2 2.6 12 DDH, DDO, DDY-CJS, DDY-SJS DDR-TJS, DDY-TJS Forward voltage, Vf is measured with an accuracy of ±0.1 V. 18/08/05 DomiLED AlInGaP DDx-xRS - Catalogue-v4 Page 5 of 11 DOMINANT Semiconductors Vf Binning. Vf Bin @ 20mA Forward Voltage (V) 01 1.55 … 1.85 02 1.85 … 2.15 03 2.15 … 2.45 04 2.45 … 2.75 Forward voltage, Vf is measured with an accuracy of ±0.1 V Absolute Maximum Ratings. Maximum Value DC forward current. Peak pulse current; (tp ≤ 10 µs, Duty cycle = 0.005) Reverse voltage. Unit 30 mA 1000 mA 5 V 125 °C Operating temperature. -40 … +100 °C Storage temperature. -40 … +100 °C 75 mW LED junction temperature. Power dissipation ( at room temperature ) 18/08/05 DomiLED AlInGaP DDx-xRS - Catalogue-v4 Page 6 of 11 DOMINANT Semiconductors Recommended Solder Pad 18/08/05 DomiLED AlInGaP DDx-xRS - Catalogue-v4 Page 7 of 11 DOMINANT Semiconductors Relative intensity vs. forward current. Forward current vs. forward voltage. Intensity vs. DC Forward Current Forward Current (mA) vs. Forward Voltage 30 2 1.8 Forward Current (mA) Relative intensity. Normalized at 20 mA. 35 2.2 1.6 1.4 1.2 1 0.8 0.6 25 AS AlInGaP 20 15 TS AlInGaP 10 0.4 5 0.2 0 0 0 10 20 30 40 50 60 1.2 1.4 1.6 FORWARD CURRENT (mA) 20° 2 2.2 2.4 2.6 Maximum forward current vs. temperature. Radiation pattern. 30° 1.8 Forward Voltage (V) 10° 0° 1.0 35 30 40° 0.8 50° 0.6 60° 0.4 70° Forward Current, If 25 20 15 10 5 0.2 80° 0 0 10 20 90° 30 40 50 60 70 80 90 Ambient Temperature 0 Relative Intensity vs. Wavelength Relative Spectra Emission 1.0 0.9 Or ange 0.8 Amber 0.7 Red 0.6 Gr een 0.5 Super Red Hyper Red 0.4 0.3 0.2 0.1 0.0 500 550 600 650 700 750 800 Wa v e l e n gt h ( nm ) 18/08/05 DomiLED AlInGaP DDx-xRS - Catalogue-v4 Page 8 of 11 100 DOMINANT Semiconductors Taping And Orientation. Reels come in quantity of 8000 units or 2000 units. Reel diameters are 330 mm and 180 mm respectively. 18/08/05 DomiLED AlInGaP DDx-xRS - Catalogue-v4 Page 9 of 11 DOMINANT Semiconductors Recommended Sn-Pb IR-Reflow Soldering Profile. Classification Reflow Profile (JEDEC J-STD-020C) 275 250 235-240oC 10-30s Temperature (oC) 225 200 Ramp-up 3 oC/sec 183 oC 175 60-150s 150 125 Ramp-down 6 oC/sec max. 100 Preheat 60-120s 75 50 360s max 25 0 50 100 150 200 Time (sec) Recommended Pb Free IR-Reflow Soldering Profile. Classification Reflow Profile (JEDEC J-STD-020C) 300 275 Temperature ( oC) 250 Ramp-up 3 oC/sec max. 217 oC 225 260-255oC 10-30s 200 60-150s 175 150 125 Ramp-down 6 oC/sec max. 100 Preheat 60-180s 75 50 480s max 25 0 50 100 150 200 Time (sec) 18/08/05 DomiLED AlInGaP DDx-xRS - Catalogue-v4 Page 10 of 11 DOMINANT Semiconductors NOTE. All the information published is considered to be reliable. However, DOMINANT Semiconductors does not assume any liability arising out of the application or use of any product described herein. DOMINANT Semiconductors reserves the right to make changes at any time without notice to any products in order to improve reliability, function or design. DOMINANT Semiconductors products are not authorized for use as critical components in life support devices or systems without the express written approval from the managing director of DOMINANT Semiconductors. 18/08/05 DomiLED AlInGaP DDx-xRS - Catalogue-v4 Page 11 of 11