American Electrical, Inc. Industrial Electrical Accessories ‘Tight Seal’ Cable Grips ‘Tight Seal’ IP68 Nylon Cable Grips by AGRO 9 7 3 1 2 6 8 5 10 4 Main Features: Cable Grips 1 Wider domed nut which can not be over-tightened. The wide dome design allows space for the neoprene seal to form a tight grip on the cable, forming an IP68 barrier. (please refer to Ingress Protection [IP] ratings on the back page.) 2 7 8 Spacer Neoprene rubber seal Webs are staggered for better grip Webs are designed in an alternating geometry which enhances gripping capability. Retention springs for domed nut The ‘Tight Seal’ design allows the domed nut to lock with the collett before any threads are engaged. This guards against misthreads as well as aids in the installation process. 9 This seal grips around the cable to form the IP68 barrier when properly tightened. 5 Sprung webs The webs are designed so that they will spring back to their original open position making installation easy while maintaining the seal quality. A small spacer exists between the domed nut and the locking collett, providing an additional seal when fully tightened. 4 Staggered webs The web disign is staggered to allow for seal conformity around the cable to maximize the pull out resistance and protection against the elements. Generous deep flats The deep flats allow enough room for the proper wrench to tighten or loosen the cable grip without the wrench coming off. 3 6 Sealing lip The collett design incorporates a sealing lip which provides for a positive seal against the enclosure. 10 Anti-Twist cable locking collett The entire design of the ‘Tight Seal’ product line insures that cables will not twist or turn once locked down. Technical Data Material: Polyamide PA 6, self-extinguishing, halogenfree Seal: Neoprene, oil and petroleum resistant Operating temperature: Static: –40°C to 100°C, short-term 120°C Dynamic: –30°C to 80°C, short-term 100°C Safety Class: IP68, waterproof (5 bar) Patents: Europe, USA, Japan VDE Test Report: 12 796-9000-4001/A 2 J. UL test (Underwriters Laboratories Inc.) Weather resistance good Lloyd’s Register of Shipping certificate Strain relief: Germanische Lloyd certificate Smooth action ‘Tight Seal’ IP68 Nylon Cable Grips IP68 Nylon Cable Grips Cable Diameter WRENCH SIZE Cable Grips with Lock Nuts Thread Type Dimensions H L PG NPT Part No. Size Metric Part No. Part No. inches mm Ø Ø mm mm mm 0.10-0.26 2.5-6.5 15 21 8 0.12-0.31 3.0-8.0 19 23 0.08-0.28 2.0-7.0 22 22 0.16-0.39 4.0-10.0 22 22 8 11 1555.11.10 1545.11.10 0.12-0.28 3.0-7.0 24 26 9 13 1555.13.07 1545.13.07 1/2 1555.N0500.07 1545.N0500.07 20x1.5 1555.20.07 1545.20.07 0.22-0.47 5.5-12.0 24 26 9 13 1555.13.12 1545.13.12 1/2 1555.N0500.12 1545.N0500.12 20x1.5 1555.20.12 1545.20.12 0.20-0.43 5.0-11.0 27 30 10 16 1555.16.11 1545.16.11 0.33-0.55 8.5-14.0 27 30 10 16 1555.16.14 1545.16.14 0.26-0.55 6.5-14.0 33 35 11 21 1555.21.14 1545.21.14 3/4 1555.N0750.14 1545.N0750.14 25x1.5 1555.25.14 1545.25.14 0.43-0.71 11.0-18.0 33 35 11 21 1555.21.18 1545.21.18 3/4 1555.N0750.18 1545.N0750.18 25x1.5 1555.25.18 1545.25.18 0.67-0.87 17.0-22.0 42 36 15 1 1555.N1000.22 1545.N1000.22 0.67-0.98 17.0-25.0 42 36 11 29 1555.29.25 1545.29.25 0.87-1.30 22.0-33.0 53 48 15 36 1555.36.33 1545.36.33 1.10-1.50 28.0-38.0 60 48 15 42 1555.42.38 1545.42.38 1.26-1.73 32.0-44.0 65 48 15 48 1555.48.44 1545.48.44 Size gray black inch 7 1555.07.06 1545.07.06 8 9 1555.09.08 1545.09.08 8 11 1555.11.07 1545.11.07 gray black Size mm gray black 12x1.5 1555.12.06 1545.12.06 3/8 1555.N0375.08 1545.N0375.08 16x1.5 1555.17.08 1545.17.08 32x1.5 1555.32.25 1545.32.25 IP68 Nylon Strain Relief Cable Grips Cable Diameter WRENCH SIZE Lock Nuts Provided with Cable Grips Thread Type Dimensions H L PG NPT Part No. Size Metric Part No. Part No. inches mm Ø Ø mm mm mm 0.10-0.26 2.5-6.5 15 54 8 0.12-0.31 3.0-8.0 19 64 0.08-0.28 2.0-7.0 22 77 0.16-0.39 4.0-10.0 22 77 8 11 1576.11.10 1546.11.10 0.12-0.28 3.0-7.0 24 88 9 13 1576.13.07 1546.13.07 1/2 1576.N0500.07 1546.N0500.07 20x1.5 1576.20.07 1546.20.07 0.22-0.47 5.5-12.0 24 88 9 13 1576.13.12 1546.13.12 1/2 1576.N0500.12 1546.N0500.12 20x1.5 1576.20.12 1546.20.12 0.20-0.43 5.0-11.0 27 102 10 16 1576.16.11 1546.16.11 0.33-0.55 8.5-14.0 27 102 10 16 1576.16.14 1546.16.14 Size gray black inch 7 1576.07.06 1546.07.06 8 9 1576.09.08 1546.09.08 8 11 1576.11.07 1546.11.07 gray black Size mm gray black 12x1.5 1576.12.06 1546.12.06 3/8 1576.N0375.08 1546.N0375.08 Lock Nuts Provided with Cable Grips American Electrical, Inc. 425 Southlake Blvd. Suite 9-B Richmond, VA 23236 Telephone: (804) 379 - 2899 FAX: (804) 379 - 8935 16x1.5 1576.17.08 1546.17.08 Ingress Protection (IP) Ratings List of Protection Classes IP Protection Classes to DIN 40 050 Sheet 1 Up to 1000 VAC and 1500 VDC (UTE standard C 200 10) IP ratings consist of a two digit number explained below: The two digets correspond to the description by DIN 40 050 sheet 1, IEC 144 and 525 as well as UTE C 200 10. 1st Digit Degree of Protection Against Touching and Foreign Matter 2nd Digit Degree of Protection Against Water IP Specifications 0 No protection. 1 Protection against penetration by solid foreign matters larger than 50 mm (accidental touching by hand). 2 Protection against penetration by solid foreign matters larger than 12 mm (touching with fingers). 3 Protection against penetration by solid foreign matters larger than 2.5 mm (touching with tools, wires larger than 2.5 mm). 4 Protection against solid foreign matters larger than 1 mm (touching with tools, wires larger than 1 mm). 5 Complete protection from being touched. Protection from harmful dust deposits dust penetration is not completely prevented. 6 Complete protection from being touched. Protection against penetration by dust. IP Specifications 0 No protection. 1 Protection against vertically dripping water. 2 Protection against drip water falling at an angle of up to 15 degrees. 3 Protection against spray water falling at an angle of up to 60 degrees. 4 Protection against spray water from all directions. 5 Protection against water jets from all directions 6 Protection against temporary flooding, e.g., by rough sea. 7 Protection when submersed in water at specified pressure and unspecified duration. 8 Protection when submersed in water at elevated pressure and unspecified time. Use and Application of Nylon Cable Grips 1. The use of synthetic - Cable Grips is almost unlimited within the electrical and electronics industry. Installations where cables must be led safely through a wall of an enclosure will be specified with cable grips. Synthetic Cable grips are specified to: • Secure the cable to the enclosure’s wall to provide excellent pull-out resistance. • Seal and protect • Reduce material cost due to use of lighter, less 2. the inside of the enclosure from the unwanted affects of the environment. These contaminants may be water, gas, chemicals vapors, or fumes. expensive materials, as well as, eliminating the need for running conduit. Some of the typical applications using cable grips are: • • • • • • • • • • • • • • • Machinery Process equipment engineering Apparatus and appliance construction Aircraft and automotive engineering Locomotive engineering Elevator engineering Plant engineering Chemical and pharmaceutical industries Refineries Nuclear research institutions Process automation and process engineering Indoor and outdoor electrical installations Switchgear and distribution construction equipment for military purposes municipal and utility type applications, such as power, electricity and gas works American Electrical, Inc. 425 Southlake Blvd. Suite 9-B Richmond, VA 23236 Telephone: (804) 379 - 2899 FAX: (804) 379 - 8935 DOC9802R1