DGP30W DAMPER SINTERED GLASS JUNCTION PLASTIC RECTIFIER VOLTAGE:1500V CURRENT: 3.0A FEATURE DO-201AD Specially designed for clamping circuits, horizontal deflection systems and damper applications High temperature metallurgically bonded construction 3.0 ampere operation at Ta=50℃ with no thermal runaway Sintered glass cavity free junction Capable of meeting environmental standard of MIL-S-19500 High temperature soldering guaranteed 350°C /10sec/0.375”lead length at 5 lbs tension Operate at Ta =55°C with no thermal run away Typical Ir<0.1µA MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8”lead length at Ta =50℃ Peak Forward Surge Current 8.3ms single Half sinewave superimposed on rated load at Ta=50℃ Maximum Instantaneous Forward Voltage at 3.0A Maximum full load reverse current full cycle average 0.375”(9.5mm) lead length at Ta=70℃ Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =100℃ Typical Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Storage and Operating Junction Temperature SYMBOL DGP30W units Vrrm Vrms Vdc 1500 1050 1500 V V V If(av) 3.0 A Ifsm 100.0 A Vf 1.2 V Ir(av) 200.0 µA Ir Trr Cj Rth(ja) Tstg, Tj 5.0 100.0 1.0 40.0 20.0 -65 to +175 µA µS pF ℃/W ℃ Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient at 0.375”(9.5mm) lead length, with leads attached to heat sink Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES DGP30W Rev.A1 www.gulfsemi.com