Photomicrosensor EE-SPY415 (Reflective) Dimensions Features All units are in millimeters unless otherwise indicated. Note: 2.5 JAPAN EE--SPY415 Φ3.8 hole 11 interference. Lot No. Part Number Φ3.2 hole 2.1 33 7 • Photo IC circuitry greatly improves response time. • Pulse modulation effectively reduces external light 2.5 R4 • Convergent technology ensures enhanced sensing area. 1 Vcc 2 OUTPUT 3 GND Max 12 Absolute Maximum Ratings (Ta = 25°C) 3 2 1 0.4 2 3.5±0.2 11 26.5±0.2 3 3.5 Item 171825-3 (Amp Japan) 5 2 Φ3.2 hole Φ3+0 2 2 --0.1 9.6 Symbol Rated value Supply voltage Vcc 7 VDC Output voltage Vout 16 V Output current Iout 30 mA Operating temperature Topr --10°C to 60°C Storage temperature Tstg --40°C to 85°C 3.5±0.2 Ordering Information Description Part number Photomicrosensor (Reflective) EE-SPY415 Electrical and Optical Characteristics (Ta = 25°C, Vcc = 12 V±10%) Item Symbol y Unit Limits Min Typ Test Conditions Max Consumption current ICC ---- ---- 25 mA With/without object Low level output voltage VOL ---- ---- 0.4 V IOUT = 20 mA with object High level output voltage VOH VCC by 0.9 ---- ---- V VOUT=VCC RL=1 KΩ Without object Response delay time (See Note.) tPLH tPHL ---- ---- 1 ms VOUT=VCC RL=1 KΩ Note: Response delay time is defined as below. ICC VCC With object Without object IOUT t VOH Output Voltage VOL RL VOUT VOH VOL tPHL tPLH GND t 212 EE-SPY415 EE-SPY415 Ratings (Ta = 25°C, Vcc = 12 V±10%) Item Limits Detectable distance (See Note.) 11 ¦ 2 mm (Black paper and OHP paper) 11 ¦ 8 mm (White paper) Non-detectable distance (See Note.) 20 mm (Black sponge) 45 mm (White paper) Usable ambient illumination 3,000 Lx max. at Receiver surface (incandescent lamp, fluorescent lamp) Vibration Mechanical durability 10 to 150 Hz, Peak acceleration 10G (100 m/s) 1.5 mm double amplitude for 2 hours each in X, Y, Z directions Shock Mechanical durability 300 m/s2 (approximately 30 G) in X, Y, Z directions, respectively 3 times Resistance to noise (normal mode) Faulty operation 200 Vp, pulse width: 1 μs Break 350 Vp, pulse width: 1 μs Resistance to noise (common mode) Faulty operation 250 Vp, pulse width: 1 μs Break 500 Vp, pulse width: 1 μs Terminal strength Tensile strength 2 kgf (20 N), for 5 seconds Flexure strength 1 kgf (10 N) , 1 time, for 5 seconds Note: If a background object is present, the object should be located at the specified non-detectable distance or further from the receiver surface. White paper: reflection factor of 90% Black paper: reflection factor of 16% Output power dissipation Pout (mW) Engineering Data 300 250 200 150 100 50 0 -40-30-20-10 0 10 2030 40 50 60 70 80 90100 Ambient Temperature TA (°C) 213 EE-SPY415 EE-SPY415 NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4. R OMRON ELECTRONICS LLC OMRON CANADA, INC. OMRON ON–LINE One East Commerce Drive Schaumburg, IL 60173 885 Milner Avenue Toronto, Ontario M1B 5V8 847–882–2288 416-286-6465 Global – http://www.omron.com USA – http://www.omron.com/oei Canada – http://www.omron.com/oci Cat. No. NAPMS–1 02/03 Specifications subject to change without notice. 214 Printed in U.S.A.