Aluminum Electrolytic Capacitors/ UQ Snap-in Type Series: UQ Country of Origin Type : TS Japan Malaysia U.S.A (ii) n Features Endurance: 85°C 2000 h 30% smaller than series UP RoHS directive compliant (ii) Regarding USA product, , Please check PEDCA s Catalog. n Recommended Applications Smoothing circuits, AC adaptor n Specifications Category temp. range -40 to + 85°C Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current 16 to 100V.DC -25 to + 85°C 315 to 450 V .DC 160 to 250 V .DC 1000 to 100000µF 270 to 3900 µ F 82 to 1000 µ F ±20 % (120Hz/+20°C) 3√CV (µA) max. after 5 minutes application of rated working voltage at +20°C. C:Capacitance(µF) V: W.V. (V.DC) tan δ Please see the attached standard products list Frequency (Hz) Frequency Correction Correction 16 to 100V Factor for Ripple Current Factor 160 to 450V 50 60 100 120 500 1k 10k to 0.93 0.95 0.99 1.00 1.05 1.08 1.15 0.75 0.80 0.95 1.00 1.20 1.25 1.40 After 2000 hours application of DC voltage with specified ripple current (< rated DC working voltage) at +85°C, the capacitor shall meet the following limits. Endurance Capacitance change ±20 % of initial measured value tan δ < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +85±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance(With voltage treatment) Shelf Life n Dimensions in mm (not to scale) φD+1.0 max Polarity bar (10.0) 2-φ2.0±0.1 PET Sleeve 10.0±0.1 Vent L+2.0 max 4.0± 0.5 +0.2 0.8 - 0.1 Recommended PWB piercing plan Terminal (t= 0.8) (3.5) 4.0±0.5 2.0 max Bottom of can 1.5 ± 0.2 Standard terminal type does not require terminal trimming process. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. EE164 Aluminum Electrolytic Capacitors/ UQ n Standard Products W.V. Cap. (±20%) (V) Dia. Specification Length Ripple tan δ current (120Hz) (120Hz) (+85°C) (+20°C) (mm) (A) (µF) (mm) 12000 22 25 4.5 15000 22 30 5.3 22 35 5.6 25 25 5.6 22 40 6.1 25 30 6.1 18000 22000 27000 16 Case size 33000 Part No. Min.PackagingQ'ty PET sleeve Terminal Length 4.0mm (Without P.V.C.plate) (pcs) 0.50 EETUQ1C123HJ 200 0.50 EETUQ1C153HJ 200 0.50 EETUQ1C183HJ 200 0.50 EETUQ1C183JJ 200 0.50 EETUQ1C223HJ 200 0.50 EETUQ1C223JJ 200 22 45 6.3 0.50 EETUQ1C273HJ 200 25 35 6.3 0.50 EETUQ1C273JJ 200 30 25 6.3 0.50 EETUQ1C273KJ 200 22 50 6.8 0.50 EETUQ1C333HJ 200 25 40 6.8 0.50 EETUQ1C333JJ 200 30 30 6.8 0.50 EETUQ1C333KJ 200 25 6.8 0.50 EETUQ1C333LJ 200 25 45 6.9 0.56 EETUQ1C393JJ 200 30 35 6.9 0.56 EETUQ1C393KJ 100 47000 25 50 7.5 0.64 EETUQ1C473JJ 200 30 40 7.5 0.64 EETUQ1C473KJ 100 35 30 7.5 0.64 EETUQ1C473LJ 200 30 45 8.7 0.73 EETUQ1C563KJ 100 35 35 8.7 0.73 EETUQ1C563LJ 100 30 50 9.1 0.85 EETUQ1C683KJ 100 35 40 9.1 0.85 EETUQ1C683LJ 100 35 45 9.5 0.99 EETUQ1C823LJ 100 56000 68000 82000 100000 35 50 10.2 1.17 EETUQ1C104LJ 100 8200 22 25 3.6 0.40 EETUQ1E822HJ 200 10000 22 30 3.8 0.40 EETUQ1E103HJ 200 12000 22 30 4.1 0.40 EETUQ1E123HJ 200 25 25 4.1 0.40 EETUQ1E123JJ 200 15000 22 35 4.6 0.40 EETUQ1E153HJ 200 25 30 4.6 0.40 EETUQ1E153JJ 200 18000 22 40 5.5 0.40 EETUQ1E183HJ 200 25 22000 27000 33000 25 35 5.5 0.40 EETUQ1E183JJ 200 30 25 5.5 0.40 EETUQ1E183KJ 200 22 45 6.1 0.40 EETUQ1E223HJ 200 25 40 6.1 0.40 EETUQ1E223JJ 200 30 30 6.1 0.40 EETUQ1E223KJ 200 35 25 6.1 0.40 EETUQ1E223LJ 200 25 45 6.2 0.40 EETUQ1E273JJ 200 30 35 6.2 0.40 EETUQ1E273KJ 100 25 50 6.8 0.40 EETUQ1E333JJ 200 30 40 6.8 0.40 EETUQ1E333KJ 100 35 30 6.8 0.40 EETUQ1E333LJ 200 Endurance : 85°C 2000 h, Terminal Pitch : 10mm When capacitors of f35×45L and f35×50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. EE165 Surface Mount Type Radial Lead Type Snap-in Type Aluminum Electrolytic Capacitors 35 39000 Aluminum Electrolytic Capacitors/ UQ n Standard Products W.V. Cap. (±20%) (V) 25 35 Specification Ripple tan δ current (120Hz) (120Hz) (+85°C) (+20°C) (mm) (A) Length Part No. Min.PackagingQ'ty PET sleeve Terminal Length 4.0mm (µF) (mm) 39000 30 35 35 7.4 0.46 EETUQ1E393LJ 100 47000 30 50 8.0 0.54 EETUQ1E473KJ 100 35 40 8.0 0.54 EETUQ1E473LJ 100 56000 35 45 8.7 0.63 EETUQ1E563LJ 100 68000 35 50 9.6 0.75 EETUQ1E683LJ 100 5600 22 25 3.4 0.35 EETUQ1V562HJ 200 6800 22 30 3.7 0.35 EETUQ1V682HJ 200 8200 22 30 4.0 0.35 EETUQ1V822HJ 200 25 25 4.0 0.35 EETUQ1V822JJ 200 10000 22 35 4.4 0.35 EETUQ1V103HJ 200 25 30 4.4 0.35 EETUQ1V103JJ 200 12000 22 40 5.1 0.35 EETUQ1V123HJ 200 15000 18000 22000 45 7.4 0.46 (Without P.V.C.plate) EETUQ1E393KJ (pcs) 100 25 35 5.1 0.35 EETUQ1V123JJ 200 30 25 5.1 0.35 EETUQ1V123KJ 200 22 45 5.6 0.35 EETUQ1V153HJ 200 25 40 5.6 0.35 EETUQ1V153JJ 200 25 45 5.7 0.35 EETUQ1V183JJ 200 30 30 5.7 0.35 EETUQ1V183KJ 200 35 25 5.7 0.35 EETUQ1V183LJ 200 25 50 6.1 0.35 EETUQ1V223JJ 200 30 35 6.1 0.35 EETUQ1V223KJ 100 35 30 6.1 0.35 EETUQ1V223LJ 200 27000 30 45 6.8 0.35 EETUQ1V273KJ 100 35 35 6.8 0.35 EETUQ1V273LJ 100 33000 30 50 7.2 0.35 EETUQ1V333KJ 100 35 40 7.2 0.35 EETUQ1V333LJ 100 39000 35 45 7.7 0.41 EETUQ1V393LJ 100 47000 35 50 8.5 0.49 EETUQ1V473LJ 100 3300 22 25 2.7 0.30 EETUQ1H332HJ 200 3900 22 30 2.8 0.30 EETUQ1H392HJ 200 4700 22 30 3.0 0.30 EETUQ1H472HJ 200 5600 50 Case size Dia. 6800 8200 10000 25 25 3.0 0.30 EETUQ1H472JJ 200 22 35 3.4 0.30 EETUQ1H562HJ 200 22 40 3.9 0.30 EETUQ1H682HJ 200 25 30 3.9 0.30 EETUQ1H682JJ 200 30 25 3.9 0.30 EETUQ1H682KJ 200 22 45 4.4 0.30 EETUQ1H822HJ 200 25 35 4.4 0.30 EETUQ1H822JJ 200 22 50 5.0 0.30 EETUQ1H103HJ 200 25 40 5.0 0.30 EETUQ1H103JJ 200 30 30 5.0 0.30 EETUQ1H103KJ 200 Endurance : 85°C 2000 h, Terminal Pitch : 10mm When capacitors of f35×45L and f35×50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. EE166 Aluminum Electrolytic Capacitors/ UQ n Standard Products W.V. Cap. 50 Part No. Min.PackagingQ'ty Length (µF) (mm) (mm) 10000 35 25 5.0 0.30 EETUQ1H103LJ 200 12000 25 45 5.6 0.30 EETUQ1H123JJ 200 30 35 5.6 0.30 EETUQ1H123KJ 100 35 30 5.6 0.30 EETUQ1H123LJ 200 30 40 6.4 0.30 EETUQ1H153KJ 100 35 35 6.4 0.30 EETUQ1H153LJ 100 18000 30 45 6.9 0.30 EETUQ1H183KJ 100 35 40 6.9 0.30 EETUQ1H183LJ 100 22000 35 45 7.6 0.30 EETUQ1H223LJ 100 27000 35 50 8.3 0.30 EETUQ1H273LJ 100 2200 22 25 2.5 0.30 EETUQ1J222HJ 200 2700 22 30 3.7 0.30 EETUQ1J272HJ 200 3300 22 30 4.1 0.30 EETUQ1J332HJ 200 15000 4700 5600 63 6800 8200 PET sleeve Terminal Length 4.0mm (Without P.V.C.plate) (pcs) 25 25 4.1 0.30 EETUQ1J332JJ 200 22 35 4.4 0.30 EETUQ1J392HJ 200 25 30 4.4 0.30 EETUQ1J392JJ 200 22 40 4.9 0.30 EETUQ1J472HJ 200 25 35 4.9 0.30 EETUQ1J472JJ 200 30 25 4.9 0.30 EETUQ1J472KJ 200 22 45 5.4 0.30 EETUQ1J562HJ 200 25 40 5.4 0.30 EETUQ1J562JJ 200 25 45 5.8 0.30 EETUQ1J682JJ 200 30 30 5.8 0.30 EETUQ1J682KJ 200 35 25 6.0 0.30 EETUQ1J682LJ 200 25 50 6.0 0.30 EETUQ1J822JJ 200 30 35 6.0 0.30 EETUQ1J822KJ 100 35 30 6.5 0.30 EETUQ1J822LJ 200 10000 30 40 6.5 0.30 EETUQ1J103KJ 100 35 35 6.5 0.30 EETUQ1J103LJ 100 12000 30 45 7.2 0.30 EETUQ1J123KJ 100 35 40 7.2 0.30 EETUQ1J123LJ 100 35 45 7.9 0.30 EETUQ1J153LJ 100 15000 18000 35 50 8.6 0.30 EETUQ1J183LJ 100 1500 22 25 2.3 0.25 EETUQ1K152HJ 200 1800 22 30 2.5 0.25 EETUQ1K182HJ 200 2200 22 35 2.7 0.25 EETUQ1K222HJ 200 25 25 2.7 0.25 EETUQ1K222JJ 200 22 40 2.8 0.25 EETUQ1K272HJ 200 2700 3300 25 30 2.8 0.25 EETUQ1K272JJ 200 22 45 3.2 0.25 EETUQ1K332HJ 200 25 35 3.2 0.25 EETUQ1K332JJ 200 30 25 3.2 0.25 EETUQ1K332KJ 200 Endurance : 85°C 2000 h, Terminal Pitch : 10mm When capacitors of f35×45L and f35×50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. EE167 Surface Mount Type Radial Lead Type Snap-in Type Aluminum Electrolytic Capacitors 3900 80 Specification Ripple tan δ current (120Hz) (120Hz) (+85°C) (+20°C) (A) Dia. (±20%) (V) Case size Aluminum Electrolytic Capacitors/ UQ n Standard Products W.V. Cap. (±20%) (V) Case size Dia. Length Specification Part No. Ripple tan δ current (120Hz) (120Hz) (+85°C) (+20°C) (A) PET sleeve Min.PackagingQ'ty Terminal Length 4.0mm (µF) (mm) (mm) 3900 22 50 25 40 3.6 0.25 EETUQ1K392JJ 200 4700 25 45 4.1 0.25 EETUQ1K472JJ 200 30 30 4.1 0.25 EETUQ1K472KJ 200 5600 25 50 4.6 0.25 EETUQ1K562JJ 200 80 6800 8200 3.6 0.25 (Without P.V.C.plate) (pcs) EETUQ1K392HJ 200 30 35 4.6 0.25 EETUQ1K562KJ 100 35 30 4.6 0.25 EETUQ1K562LJ 200 30 45 5.2 0.25 EETUQ1K682KJ 100 35 35 5.2 0.25 EETUQ1K682LJ 100 30 50 5.8 0.25 EETUQ1K822KJ 100 35 40 5.8 0.25 EETUQ1K822LJ 100 10000 35 45 6.4 0.25 EETUQ1K103LJ 100 12000 35 50 7.0 0.25 EETUQ1K123LJ 100 1000 22 25 2.0 0.25 EETUQ2A102HJ 200 1200 22 30 2.3 0.25 EETUQ2A122HJ 200 25 25 2.3 0.25 EETUQ2A122JJ 200 1500 22 30 2.6 0.25 EETUQ2A152HJ 200 1800 22 35 2.8 0.25 EETUQ2A182HJ 200 25 30 2.8 0.25 EETUQ2A182JJ 200 22 45 3.1 0.25 EETUQ2A222HJ 200 25 35 3.1 0.25 EETUQ2A222JJ 200 30 25 3.1 0.25 EETUQ2A222KJ 200 2200 2700 100 3300 3900 4700 22 50 3.7 0.25 EETUQ2A272HJ 200 25 40 3.7 0.25 EETUQ2A272JJ 200 30 30 3.7 0.25 EETUQ2A272KJ 200 35 25 3.7 0.25 EETUQ2A272LJ 200 25 45 4.1 0.25 EETUQ2A332JJ 200 30 35 4.1 0.25 EETUQ2A332KJ 100 25 50 4.5 0.25 EETUQ2A392JJ 200 30 40 4.5 0.25 EETUQ2A392KJ 100 35 30 4.5 0.25 EETUQ2A392LJ 200 30 45 5.1 0.25 EETUQ2A472KJ 100 35 35 5.1 0.25 EETUQ2A472LJ 100 5600 30 50 5.8 0.25 EETUQ2A562KJ 100 35 40 5.8 0.25 EETUQ2A562LJ 100 6800 35 45 6.6 0.25 EETUQ2A682LJ 100 8200 35 50 7.2 0.25 EETUQ2A822LJ 100 Endurance : 85°C 2000 h, Terminal Pitch : 10mm When capacitors of f35×45L and f35×50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. EE168 Aluminum Electrolytic Capacitors/ UQ n Standard Products W.V. Cap. (±20%) (V) Case size Dia. Specification Ripple tan δ current (120Hz) (120Hz) (+85°C) (+20°C) (mm) (A) Length (µF) (mm) 560 22 25 2.25 680 22 30 2.50 Part No. Min.Packaging Q'ty PET sleeve Terminal Length 4.0mm (Without P.V.C. plate) (pcs) 0.15 EETUQ2C561HJ 200 0.15 EETUQ2C681HJ 200 22 35 2.75 0.15 EETUQ2C821HJ 200 22 40 3.00 0.15 EETUQ2C102HJ 200 25 30 3.00 0.15 EETUQ2C102JJ 200 1200 22 45 3.25 0.15 EETUQ2C122HJ 200 25 35 3.25 0.15 EETUQ2C122JJ 200 30 25 3.25 0.15 EETUQ2C122KJ 200 22 50 3.73 0.15 EETUQ2C152HJ 200 25 40 3.73 0.15 EETUQ2C152JJ 200 30 30 3.73 0.15 EETUQ2C152KJ 200 35 25 3.73 0.15 EETUQ2C152LJ 200 25 45 4.20 0.15 EETUQ2C182JJ 200 30 35 4.20 0.15 EETUQ2C182KJ 100 35 30 4.20 0.15 EETUQ2C182LJ 200 30 40 4.78 0.15 EETUQ2C222KJ 100 35 35 4.78 0.15 EETUQ2C222LJ 100 30 45 5.45 0.15 EETUQ2C272KJ 100 35 40 5.45 0.15 EETUQ2C272LJ 100 3300 35 45 5.75 0.15 EETUQ2C332LJ 100 3900 35 50 6.00 0.15 EETUQ2C392LJ 100 470 22 25 2.08 0.15 EETUQ2P471HJ 200 560 22 30 2.25 0.15 EETUQ2P561HJ 200 680 22 30 2.50 0.15 EETUQ2P681HJ 200 25 25 2.50 0.15 EETUQ2P681JJ 200 820 22 35 2.75 0.15 EETUQ2P821HJ 200 25 30 2.75 0.15 EETUQ2P821JJ 200 1000 22 45 3.00 0.15 EETUQ2P102HJ 200 25 35 3.00 0.15 EETUQ2P102JJ 200 30 25 3.00 0.15 EETUQ2P102KJ 200 22 50 3.31 0.15 EETUQ2P122HJ 200 25 40 3.31 0.15 EETUQ2P122JJ 200 30 30 3.31 0.15 EETUQ2P122KJ 200 1500 160 1800 2200 2700 1200 180 1500 1800 2200 35 25 3.31 0.15 EETUQ2P122LJ 200 25 45 3.83 0.15 EETUQ2P152JJ 200 30 35 3.83 0.15 EETUQ2P152KJ 100 35 30 3.83 0.15 EETUQ2P152LJ 200 25 50 4.32 0.15 EETUQ2P182JJ 200 30 40 4.32 0.15 EETUQ2P182KJ 100 35 30 4.32 0.15 EETUQ2P182LJ 200 30 45 4.92 0.15 EETUQ2P222KJ 100 35 40 4.92 0.15 EETUQ2P222LJ 100 Endurance : 85°C 2000h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. EE169 Surface Mount Type Radial Lead Type Snap-in Type Aluminum Electrolytic Capacitors 820 1000 Aluminum Electrolytic Capacitors/ UQ n Standard Products W.V. Cap. (±20%) (V) 180 Dia. Specification Ripple tan δ current (120Hz) (120Hz) (+85°C) (+20°C) (mm) (A) Length (µF) (mm) 2700 30 50 5.52 Part No. Min.Packaging Q'ty PET sleeve Terminal Length 4.0mm (Without P.V.C.plate) (pcs) 0.15 EETUQ2P272KJ 100 35 45 5.52 0.15 EETUQ2P272LJ 100 3300 35 50 5.75 0.15 EETUQ2P332LJ 100 390 22 25 1.68 0.15 EETUQ2D391HJ 200 470 22 30 1.85 0.15 EETUQ2D471HJ 200 560 22 30 2.43 0.15 EETUQ2D561HJ 200 25 25 2.43 0.15 EETUQ2D561JJ 200 680 820 1000 200 1200 1500 1800 2200 250 Case size 22 35 2.68 0.15 EETUQ2D681HJ 200 25 30 2.68 0.15 EETUQ2D681JJ 200 22 40 2.93 0.15 EETUQ2D821HJ 200 25 30 2.93 0.15 EETUQ2D821JJ 200 30 25 2.93 0.15 EETUQ2D821KJ 200 22 45 3.25 0.15 EETUQ2D102HJ 200 25 35 3.25 0.15 EETUQ2D102JJ 200 30 30 3.25 0.15 EETUQ2D102KJ 200 35 25 3.25 0.15 EETUQ2D102LJ 200 22 50 3.50 0.15 EETUQ2D122HJ 200 25 40 3.50 0.15 EETUQ2D122JJ 200 30 30 3.50 0.15 EETUQ2D122KJ 200 25 50 3.87 0.15 EETUQ2D152JJ 200 30 35 3.87 0.15 EETUQ2D152KJ 100 35 30 3.87 0.15 EETUQ2D152LJ 200 30 45 4.32 0.15 EETUQ2D182KJ 100 35 35 4.32 0.15 EETUQ2D182LJ 100 30 50 4.92 0.15 EETUQ2D222KJ 100 35 40 4.92 0.15 EETUQ2D222LJ 100 2700 35 50 5.45 0.15 EETUQ2D272LJ 100 270 22 25 1.31 0.15 EETUQ2E271HJ 200 330 22 30 1.75 0.15 EETUQ2E331HJ 200 390 22 30 1.91 0.15 EETUQ2E391HJ 200 25 25 1.91 0.15 EETUQ2E391JJ 200 470 22 35 2.11 0.15 EETUQ2E471HJ 200 25 30 2.11 0.15 EETUQ2E471JJ 200 560 22 40 2.25 0.15 EETUQ2E561HJ 200 25 30 2.25 0.15 EETUQ2E561JJ 200 30 25 2.25 0.15 EETUQ2E561KJ 200 680 820 22 45 2.50 0.15 EETUQ2E681HJ 200 25 35 2.50 0.15 EETUQ2E681JJ 200 30 30 2.50 0.15 EETUQ2E681KJ 200 22 50 2.77 0.15 EETUQ2E821HJ 200 25 40 2.77 0.15 EETUQ2E821JJ 200 30 30 2.77 0.15 EETUQ2E821KJ 200 Endurance : 85°C 2000h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. EE170 Aluminum Electrolytic Capacitors/ UQ n Standard Products W.V. Cap. (±20%) (V) 250 Dia. Specification Ripple tan δ Length current (120Hz) (120Hz) (+85°C) (+20°C) (mm) (A) Part No. Min.Packaging Q'ty PET sleeve Terminal Length 4.0mm (µF) (mm) 820 35 25 2.77 0.15 EETUQ2E821LJ 200 1000 25 45 3.32 0.15 EETUQ2E102JJ 200 30 35 3.32 0.15 EETUQ2E102KJ 100 35 30 3.32 0.15 EETUQ2E102LJ 200 30 40 3.53 0.15 EETUQ2E122KJ 100 35 35 3.53 0.15 EETUQ2E122LJ 100 30 50 4.04 0.15 EETUQ2E152KJ 100 1200 1500 (Without P.V.C. plate) (pcs) 40 4.04 0.15 EETUQ2E152LJ 100 35 45 4.55 0.15 EETUQ2E182LJ 100 180 22 25 1.12 0.15 EETUQ2F181HJ 200 220 22 30 1.41 0.15 EETUQ2F221HJ 200 270 22 30 1.60 0.15 EETUQ2F271HJ 200 330 22 40 1.82 0.15 EETUQ2F331HJ 200 25 30 1.82 0.15 EETUQ2F331JJ 200 470 315 560 680 820 1000 30 25 1.82 0.15 EETUQ2F331KJ 200 22 45 2.01 0.15 EETUQ2F391HJ 200 25 35 2.01 0.15 EETUQ2F391JJ 200 30 30 2.01 0.15 EETUQ2F391KJ 200 22 50 2.27 0.15 EETUQ2F471HJ 200 25 40 2.27 0.15 EETUQ2F471JJ 200 30 30 2.27 0.15 EETUQ2F471KJ 200 35 25 2.27 0.15 EETUQ2F471LJ 200 25 45 2.56 0.15 EETUQ2F561JJ 200 30 35 2.56 0.15 EETUQ2F561KJ 100 35 30 2.56 0.15 EETUQ2F561LJ 200 30 40 2.87 0.15 EETUQ2F681KJ 100 35 35 2.87 0.15 EETUQ2F681LJ 100 30 45 3.25 0.15 EETUQ2F821KJ 100 35 40 3.25 0.15 EETUQ2F821LJ 100 30 50 3.63 0.15 EETUQ2F102KJ 100 35 45 3.63 0.15 EETUQ2F102LJ 100 150 22 25 1.12 0.15 EETUQ2V151HJ 200 180 22 30 1.22 0.15 EETUQ2V181HJ 200 220 22 35 1.44 0.15 EETUQ2V221HJ 200 270 22 40 1.66 0.15 EETUQ2V271HJ 200 25 30 1.66 0.15 EETUQ2V271JJ 200 330 390 22 45 1.88 0.15 EETUQ2V331HJ 200 25 35 1.88 0.15 EETUQ2V331JJ 200 22 50 2.06 0.15 EETUQ2V391HJ 200 25 40 2.06 0.15 EETUQ2V391JJ 200 30 30 2.06 0.15 EETUQ2V391KJ 200 35 25 2.06 0.15 EETUQ2V391LJ 200 .Endurance : 85°C 2000h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. EE171 Surface Mount Type Radial Lead Type Snap-in Type Aluminum Electrolytic Capacitors 35 1800 390 350 Case size Aluminum Electrolytic Capacitors/ UQ n Standard Products W.V. Cap. (±20%) (V) Dia. (µF) (mm) 470 25 560 350 680 820 Specification Ripple tan δ Length current (120Hz) (120Hz) (+85°C) (+20°C) (mm) (A) 45 Part No. Min.Packaging Q'ty PET sleeve Terminal Length 4.0mm (Without P.V.C.plate) (pcs) 2.40 0.15 EETUQ2V471JJ 200 30 35 2.40 0.15 EETUQ2V471KJ 100 35 30 2.40 0.15 EETUQ2V471LJ 200 25 50 2.60 0.15 EETUQ2V561JJ 200 30 40 2.60 0.15 EETUQ2V561KJ 100 35 30 2.60 0.15 EETUQ2V561LJ 200 30 45 2.96 0.15 EETUQ2V681KJ 100 35 35 2.96 0.15 EETUQ2V681LJ 100 30 50 3.25 0.15 EETUQ2V821KJ 100 35 45 3.25 0.15 EETUQ2V821LJ 100 1000 35 50 3.54 0.15 EETUQ2V102LJ 100 120 22 25 1.02 0.15 EETUQ2G121HJ 200 150 22 30 1.16 0.15 EETUQ2G151HJ 200 180 22 35 1.44 0.15 EETUQ2G181HJ 200 220 22 40 1.49 0.15 EETUQ2G221HJ 200 25 30 1.49 0.15 EETUQ2G221JJ 200 22 45 1.67 0.15 EETUQ2G271HJ 200 25 35 1.67 0.15 EETUQ2G271JJ 200 30 30 1.67 0.15 EETUQ2G271KJ 200 22 50 1.90 0.15 EETUQ2G331HJ 200 25 40 1.90 0.15 EETUQ2G331JJ 200 30 30 1.90 0.15 EETUQ2G331KJ 200 35 25 1.90 0.15 EETUQ2G331LJ 200 25 45 2.13 0.15 EETUQ2G391JJ 200 30 35 2.13 0.15 EETUQ2G391KJ 100 35 30 2.13 0.15 EETUQ2G391LJ 200 25 50 2.39 0.15 EETUQ2G471JJ 200 30 40 2.39 0.15 EETUQ2G471KJ 100 270 330 400 390 470 450 Case size 35 30 2.39 0.15 EETUQ2G471LJ 200 560 30 45 2.69 0.15 EETUQ2G561KJ 100 35 35 2.69 0.15 EETUQ2G561LJ 100 680 30 50 2.96 0.15 EETUQ2G681KJ 100 35 45 2.96 0.15 EETUQ2G681LJ 100 820 35 50 3.25 0.15 EETUQ2G821LJ 100 82 22 25 0.83 0.15 EETUQ2W820HJ 200 100 22 25 0.93 0.15 EETUQ2W101HJ 200 120 22 30 1.04 0.15 EETUQ2W121HJ 200 150 22 35 1.19 0.15 EETUQ2W151HJ 200 25 30 1.19 0.15 EETUQ2W151JJ 200 22 40 1.35 0.15 EETUQ2W181HJ 200 25 30 1.35 0.15 EETUQ2W181JJ 200 22 45 1.55 0.15 EETUQ2W221HJ 200 180 220 Endurance : 85°C 2000h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. EE172 Aluminum Electrolytic Capacitors/ UQ n Standard Products W.V. Cap. (±20%) (V) Case size Dia. Specification Ripple tan δ current (120Hz) (120Hz) (+20°C) ( m m ) (+85°C) (A) Length (µF) (mm) 220 25 40 1.55 30 30 35 25 22 50 25 30 270 330 450 Part No. Min.Packaging Q'ty PET sleeve Terminal Length 4.0mm (Without P.V.C.plate) (pcs) 0.15 EETUQ2W221JJ 200 1.55 0.15 EETUQ2W221KJ 200 1.55 0.15 EETUQ2W221LJ 200 1.78 0.15 EETUQ2W271HJ 200 40 1.78 0.15 EETUQ2W271JJ 200 30 1.78 0.15 EETUQ2W271KJ 200 25 50 2.01 0.15 EETUQ2W331JJ 200 30 40 2.01 0.15 EETUQ2W331KJ 100 30 2.01 0.15 EETUQ2W331LJ 200 30 40 2.24 0.15 EETUQ2W391KJ 100 35 35 2.24 0.15 EETUQ2W391LJ 100 470 30 45 2.53 0.15 EETUQ2W471KJ 100 35 40 2.53 0.15 EETUQ2W471LJ 100 30 50 2.82 0.15 EETUQ2W561KJ 100 35 45 2.82 0.15 EETUQ2W561LJ 100 560 Endurance : 85°C 2000h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. EE173 Surface Mount Type Radial Lead Type Snap-in Type Aluminum Electrolytic Capacitors 35 390