EH11 Series EH11 • RoHS Compliant (Pb-free) • HCMOS/TTL output • 5.0V supply voltage • 14 pin DIP package • Stability to 20ppm • Custom lead length, gull wing options available H 5.08 W 20.8 L 13.2 OSCILLATOR ELECTRICAL SPECIFICATIONS Frequency Range 1.000MHz to 155.520MHz Operating Temperature Range 0°C to 70°C or -40°C to 85°C Storage Temperature Range -55°C to 125°C Supply Voltage (VDD) 5.0VDC ±10% Input Current 50mA Maximum (Unloaded) Frequency Tolerance / Stability Inclusive of all conditions: Calibration Tolerance at 25°C, ±100ppm, ±50ppm, ±25ppm, or Frequency Stability over the Operating Temperature Range, ±20ppm Maximum Supply Voltage Change, Output Load Change, First Year Aging at 25°C, Shock, and Vibration 2.4VDC Minimum IOH =-16mA VDD-0.4VDC Minimum IOH =-16mA w/TTL Load 0.4VDC Maximum IOL =+16mA w/HCMOS Load 0.5VDC Maximum IOL =+16mA at 1.4VDC w/TTL Load; at 50% of waveform w/HCMOS 50 ±10(%) (Standard) Output Voltage Logic High (VOH) w/TTL Load w/HCMOS Load Output Voltage Logic Low (VOL) Duty Cycle (VDD=5.0VDC) Load (≤70.000MHz) 50 ±10(%) (Standard) at 50% of waveform w/ TTL Load or w/HCMOS Load (>70.000MHz) Rise Time / Fall Time at 50% of waveform w/TTL Load or w/HCMOS Load 50 ±5(%) (Optional) 0.8VDC to 2.0VDC w/TTL Load or 20% to 80% 6 nSeconds Maximum of Waveform w/HCMOS Load (≤70.000MHz) 4 nSeconds Maximum 0.8VDC to 2.0VDC w/TTL Load or 20% to 80% of Waveform w/HCMOS Load (>70.000MHz) Tri-State Input Voltage VIH :No Connection Enables Output VIH :≥2.2VDC Enables Output VIL :≤0.8VDC Disables Output: High Impedance Aging (at 25°C) ±5ppm / year Maximum Start Up Time 10 mSeconds Maximum Load Drive Capability ≤70.000MHz 10TTL Load or 50pF HCMOS Load Maximum >70.000MHz 5TTL Load or 15pF HCMOS Load Maximum Period Jitter: Absolute ±250pSec Maximum, ±100pSec Typical Period Jitter: One Sigma ±50pSec Maximum, ±30pSec Typical MANUFACTURER CATEGORY ECLIPTEK CORP. OSCILLATOR SERIES PACKAGE VOLTAGE CLASS REV.DATE EH11 14 Pin DIP 5.0V OS44 12/05 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EH11 00 ET T TS - 70.000M - G FREQUENCY TOLERANCE / STABILITY 00=±100ppm Max.(Standard), 45=±50ppm Max. 25=±25ppm Max., 20=±20ppm Max. AVAILABLE OPTIONS Blank=None (Standard) CLXXX=Custom Lead Length (See Page 133) G=Full Size Gull Wing (See Page 132) OPERATING TEMP. RANGE Blank=0°C to 70°C (Standard), ET=-40°C to 85°C FREQUENCY DUTY CYCLE Blank=50 ±10(%) (Standard), T=50 ±5(%) OUTPUT CONTROL FUNCTION TS=Tri-State Enable High NOTES __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ MECHANICAL DIMENSIONS MARKING SPECIFICATIONS ALL DIMENSIONS IN MILLIMETERS Line 1: ECLIPTEK Line 2: EH11 TS Ø Series Designator Line 3: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 4: XX Y ZZ Pin 1: Tri-State Pin 7: Case Ground Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Pin 8: Output Pin 14: Supply Voltage Note: Pin 1 shall be designated with a dot ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Characteristic Fine Leak Test Gross Leak Test Mechanical Shock Vibration Lead Integrity Specification MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2004 Characteristic Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents Specification MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EH11 14 Pin DIP 5.0V OS44 12/05 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. EH11 Series EH11 • RoHS Compliant (Pb-free) • HCMOS/TTL Output • 5.0V Supply Voltage • 8 Pin DIP Package • Stability to 20ppm • Custom Lead Length and Gull Wing Options Available H 5.6 L 13.2 W 13.2 OSCILLATOR ELECTRICAL SPECIFICATIONS Frequency Range 1.000MHz to 155.520MHz Operating Temperature Range 0°C to 70°C or -40°C to 85°C Storage Temperature Range -55°C to 125°C Supply Voltage (VDD) 5.0VDC ±10% Input Current 50mA Maximum (Unloaded) Frequency Tolerance / Stability Inclusive of all conditions: Calibration Tolerance at 25°C, ±100ppm, ±50ppm, ±25ppm, or Frequency Stability over the Operating Temperature Range, ±20ppm Maximum Supply Voltage Change, Output Load Change, First Year Aging at 25°C, Shock, and Vibration 2.4VDC Minimum IOH =-16mA VDD-0.4VDC Minimum IOH =-16mA w/TTL Load 0.4VDC Maximum IOL =+16mA w/HCMOS Load 0.5VDC Maximum IOL =+16mA at 1.4VDC w/TTL Load; at 50% of waveform w/HCMOS 50 ±10(%) (Standard) Output Voltage Logic High (VOH) w/TTL Load w/HCMOS Load Output Voltage Logic Low (VOL) Duty Cycle (VDD=5.0VDC) Load (≤70.000MHz) 50 ±10(%) (Standard) at 50% of waveform w/ TTL Load or w/HCMOS Load (>70.000MHz) Rise Time / Fall Time at 50% of waveform w/TTL Load or w/HCMOS Load 50 ±5(%) (Optional) 0.8VDC to 2.0VDC w/TTL Load or 20% to 80% 6 nSeconds Maximum of Waveform w/HCMOS Load (≤70.000MHz) 4 nSeconds Maximum 0.8VDC to 2.0VDC w/TTL Load or 20% to 80% of Waveform w/HCMOS Load (>70.000MHz) Tri-State Input Voltage VIH :No Connection Enables Output VIH :≥2.2VDC Enables Output VIL :≤0.8VDC Disables Output: High Impedance Aging (at 25°C) ±5ppm / year Maximum Start Up Time 10 mSeconds Maximum Load Drive Capability ≤70.000MHz 10TTL Load or 50pF HCMOS Load Maximum >70.000MHz 5TTL Load or 15pF HCMOS Load Maximum Period Jitter: Absolute ±250pSec Maximum, ±100pSec Typical Period Jitter: One Sigma ±50pSec Maximum, ±30pSec Typical MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EH11 8 Pin DIP 5.0V OS45 08/05 800-ECLIPTEK www.ecliptek.com for latest revision 62 Specifications subject to change without notice. PART NUMBERING GUIDE EH11 00 HS ET T TS - 70.000M - G TR PACKAGING OPTIONS Blank=Bulk (Standard), TR= Tape & Reel (only offered with Half Size G and Half Size G2 Options) FREQUENCY TOLERANCE / STABILITY 00=±100ppm Max.(Standard), 45=±50ppm Max. 25=±25ppm Max., 20=±20ppm Max. PACKAGE HS=Half Size 8 Pin DIP AVAILABLE OPTIONS Blank=None (Standard) CLXXX=Custom Lead Length (See Page 133) G=Half Size Gull Wing (See Page 132) G2=Half Size Gull Wing (See Page 132) OPERATING TEMP. RANGE Blank=0°C to 70°C (Standard), ET=-40°C to 85°C DUTY CYCLE Blank=50 ±10(%) (Standard), T=50 ±5(%) FREQUENCY OUTPUT CONTROL FUNCTION TS=Tri-State Enable High MECHANICAL DIMENSIONS TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS Pin 1 Locator for Gull Wing (1) For “G” Option Ø Pin 1: Tri-State Pin 4: Case Ground Pin 5: Output Pin 8: Supply Voltage MARKING SPECIFICATIONS Line 1: ECLIPTEK Line 2: EH11 TS Series Designator 700 Pieces Per Reel Compliant to EIA-481A Line 3: XX.XXX M ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Frequency in MHz (5 Digits Maximum + Decimal) Line 4: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Note: Pin 1 shall be designated with a dot Characteristic Specification Fine Leak Test Gross Leak Test Mechanical Shock Vibration Lead Integrity Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2004 MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-883, Method 210 MIL-STD-883, Method 215 MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EH11 8 pin DIP 5.0V OS45 08/05 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.