Series 35000X SOIC & SOJ to DIP Adapters FEATURES: • A cost effective means of upgrading to SOJ or SOIC...without changing your PCB layout. • Available on .300 [7.62] centers. Consult Data Sheet No. 18011 for adapters on .400 [10.16], or .600 [15.24] centers. SPECIFICATIONS: • Board material is .062 thick FR-4 with 1 oz. Copper traces, both sides. • Pins are Brass Alloy 360 1/2 hard per UNS C36000 ASTM-B16-85. • Pin plating is 200µ [5.08µm] min.93/7 Tin/Lead per MILP-81728 over 100µ [2.54µm] min. Nickel per QQ-N-290. • Operating temperature=221°F [105°C]. MOUNTING CONSIDERATIONS: • Suggested PCB hole size=.028 ± .003 [.71 ± .08]. dia. ALL DIMENSIONS: INCHES [MILLIMETERS] Note: Aries specializes in custom design and production. In addition to the standard products shown on this page, special materials, platings, sizes, and configurations can be furnished, depending on quantities. Aries reserves the right to change product specifications without notice. All tolerances ± .005 [.13] unless otherwise specified ORDERING INFORMATION See table for part numbers “A”=NO. OF PINS PER ROW X .100 [2.54] “D”=(NO. OF PINS PER ROW - 1) X .100 [2.54] Part No. 20-350001-10 Board pad layout - top view Available in panelized form with or without customer supplied devices mounted. Consult factory. Part No. 08-350000-10 14-350000-10 16-350000-10 18-350000-10 20-350000-10 24-350000-10 20-350001-10 28-350002-10 Pins 8 14 16 18 20 24 20 28 Type SOIC SOIC SOIC SOIC SOIC SOIC SOJ SOIC Dim. “B” .460 [11.68] .450 [11.43] .450 [11.43] .450 [11.43] .450 [11.43] .450 [11.43] .420 [10.67] .400 [10.16] http://www.arieselec.com • [email protected] Centers “C” .300 [7.62] .300 [7.62] .300 [7.62] .300 [7.62] .300 [7.62] .300 [7.62] .300 [7.62] .300 [7.62] NORTH AMERICA Frenchtown, NJ USA TEL: (908) 996-6841 FAX: (908) 996-3891 Dim. “E” .455 [11.56] .420 [10.67] .420 [10.67] .420 [10.67] .420 [10.67] .420 [10.67] .350 [8.89] .350 [8.89] Dim. “F” .155 [3.94] .138 [3.51] .138 [3.51] .138 [3.51] .138 [3.51] .138 [3.51] .090 [2.29] .090 [2.29] UK/IRELAND/GB TEL: +44 870 240 0249 FAX: +44 1653 600493 [email protected] Dim. “G” .150 [3.81] .300 [7.62] .350 [8.89] .400 [10.16] .450 [11.43] .550 [13.97] .600 [15.24] .650 [16.51] Dim. “H” .121 [3.07] .180 [4.57] .180 [4.57] .180 [4.57] .180 [4.57] .180 [4.57] .060 [1.52] .375 [9.53] EUROPE/MAINLAND/HOLLAND TEL: +31 78 615 94 65 FAX: +31 78 615 43 11 18010 [email protected] REV.D PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED