PCA EPA073HL-50

14 Pin SMD 5 Tap Low Profile TTL
Compatible Active Delay Lines
ELECTRONICS INC.
EPA073HL-XX & EPA073HL-XX-RC
Add “-RC” after part number for RoHS Compliant
PCA
Part Number
EPA073HL-25(-RC)
EPA073HL-30(-RC)
EPA073HL-35(-RC)
EPA073HL-40(-RC)
EPA073HL-45(-RC)
EPA073HL-50(-RC)
EPA073HL-60(-RC)
EPA073HL-75(-RC)
EPA073HL-100(-RC)
EPA073HL-125(-RC)
EPA073HL-150(-RC)
EPA073HL-175(-RC)
Total Delay
(†±5% or ± 2nS)
Tap Delays
(†±5% or ± 2nS)
5, 10, 15, 20
6, 12, 18, 24
7, 14, 21, 28
8, 16, 24, 32
9, 18, 27, 36
10, 20, 30, 40
12, 24, 36, 48
15, 30, 45, 60
20, 40, 60, 80
25, 50, 75, 100
30, 60, 90, 120
35, 70, 105, 140
PCA
Part Number
EPA073HL-200(-RC)
EPA073HL-225(-RC)
EPA073HL-250(-RC)
EPA073HL-300(-RC)
EPA073HL-350(-RC)
EPA073HL-400(-RC)
EPA073HL-420(-RC)
EPA073HL-440(-RC)
EPA073HL-450(-RC)
EPA073HL-470(-RC)
EPA073HL-500(-RC)
25
30
35
40
45
50
60
75
100
125
150
175
Tap Delays
(†±5% or ± 2nS)
Total Delay
(†±5% or ± 2nS)
40, 80, 120, 160
45, 90, 135, 180
50, 100, 150, 200
60, 120, 180, 240
70, 140, 210, 280
80, 160, 240, 320
84, 168, 252, 336
88, 176, 264, 352
90, 180, 270, 360
94, 188, 282, 376
100, 200, 300, 400
200
225
250
300
350
400
420
440
450
470
500
†Whichever is greater. Delay times referenced from input to leading and trailing edges at 25°C, 5.0V, with no load.
DC Electrical Characteristics
Parameter
VOH
VOL
VIK
IIH
Test Conditions
Min.
High-Level Output Voltage
Low-Level Output Voltage
Input Clamp Voltage
High-Level Input Current
V CC = min. V IL = max. I OH = max 2.7
V CC = min. V IH = min. I OL = max
V CC = min. II = II K
V CC = max. VIN = 2.7V
V CC = max. VIN = 5.25V
IIL
Low-Level Input Current
V CC = max. VIN = 0.5V
IOS
Short Circuit Output Current V CC = max. V OUT = 0.
-40
(One output at a time)
ICCH High-Level Supply Current
V CC = max. VIN = OPEN
ICCL Low-Level Supply Current
V CC = max. VIN = 0
TRO Output Rise Time
Td ≤ 500 nS (0.75 to 2.4 Volts)
Td > 500 nS
NH
Fanout High-Level Output
V CC = max. V OH = 2.7V
NL
Fanout Low-Level Output
V CC = max. V OL = 0.5V
Max.
Unit
0.5
-1.2
50
1.0
-2
-100
V
V
V
µA
mA
mA
mA
Schematic
14
12
VCC
4
10
6
8
OUTPUT
INPUT 1
7 GROUND
75
mA
75
mA
4
nS
5
nS
20 TTL Load
10 TTL Load
Package
.055
(1.40)
.200
(5.08)
.400
Max.
(10.16)
Recommended Operating Conditions Min.
VCC
VIH
VIL
IIK
IOH
IOL
PW*
d*
TA
Supply Voltage
High-Level Input Voltage
Low-Level Input Voltage
Input Clamp Current
High-Level Output Current
Low-Level Output Current
Pulse Width of Total Delay
Duty Cycle
Operating Free-Air Temperature
4.75
2.0
Max.
Unit
5.25
V
V
V
mA
mA
mA
%
%
°C
0.8
-18
-1.0
20
40
0
40
+70
PCA
EPA073HL-XX(-RC)
Date Code
.300
(7.62)
.200
(5.08)
Suggested Solder
Pad Layout
.300
(7.62)
.780 Max.
(19.81)
.410
(10.41)
.030
(.762)
.010
Typ.
(.254)
.165 Max.
(4.19)
.020
(.508)
.280
Max.
(7.11)
.100
(2.54)
.050
(1.27)
.300
(7.62)
*These two values are inter-dependent.
Notes :
Input Pulse Test Conditions @ 25° C
EIN
PW
TRI
PRR
Pulse Input Voltage
Pulse Width % of Total Delay
Pulse Rise Time (0.75 - 2.4 Volts)
Pulse Repetition Rate @ Td ≤ 200 nS
Pulse Repetition Rate @ Td > 200 nS
VCC Supply Voltage
Unit
3.2
110
2.0
1.0
100
5.0
Volts
%
nS
MHz
KHz
Volts
EPA073HL-XX
EPA073HL-XX-RC
1. Lead Finish
SnPb
Hot Dip Sn or SAC
2. Peak Temperature Rating
225°C
245°C
3. Moisture Sensitive Levels
3 (168 hourss,
≤30°C/60%RH)
4 (72 hours,
≤30°C/60%RH)
1.35 grams
1.35 grams
4. Weight
5. Packaging Information
(Tube)
(Tape & Reel)
27 pieces/tube
27 pieces/tube
600 pieces/13” reel
600 pieces/13” ree
Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25
PCA ELECTRONICS, INC.
16799 SCHOENBORN ST.
NORTH HILLS, CA 91343
Product performance is limited to specified parameters. Data is subject to change without prior notice.
CSA073HL & -RC
Rev. 2
3/4/08 RR
TEL: (818) 892-0761
FAX: (818) 894-5791
http://www.pca.com