FUJITSU SEMICONDUCTOR DATA SHEET DS07-20103-1E Resonator Piezoelectric Resonator (8 to 16 MHz) FAR Family (C4 series G type) ■ DESCRIPTION Fujitsu resonators C4 series (G type) feature originally developed single crystals with a high electromechanical coefficient (LiNbO3 lithium niobate), the result is ultra compact packaging. C4 series (G type) with built-in capacitors for exclusive use in microcomputer clocks, and this series is chip type device for surface-mount. ■ FEATURES • • • • • Ultra compact package. Wide frequency range in 8 to 16 MHz. C4 (G type), with built-in capacitors, is the best suited to the source of microcomputer clocks. C4 (G type) can be shipped in emboss-typed packages for automatic mounting. The resonators have superior shock and vibration resistance, preventing damage during automatic mounting process. ■ PACKAGE FAR Family (C4 series G type) ■ STANDARD CHARACTERISTICS Series Parameter Material C4 series (G type) Lithium Niobate (LiNbO3) Frequency Standard frequency 8 to 16 MHz See “■ Standard Frequency.” Initial frequency deviation ±0.5% (µ) Temperature characteristics (–20°C to 60°C) ±0.5% Capacity of built-in capacitor Aging stability 20±8 pF (Standard) 10±4 pF type are also available. However, the characteristics of 10±4 pF type should be specified by Fujitsu, considering matching data with applied IC (mainly microcomputer.) Within ±0.1% Operating temperature –30°C to +85°C Storage temperature –40°C to +100°C Standard measuring circuit Remarks (1) Oscillation frequency (2) Serial resonant resistance R 1 MΩ R 3 1 C1 C2 75 Ω OSC C1 C2 75 Ω LM 2 8 MHz to 10 MHz IC: 1/6 MB84069B x 2 10 MHz to 16 MHz IC: 1/6 MC74HC04 x 2 • VCC=5 V DC • R : Resonator • C1, C2 : Loading capacitance (built-in) 2 Measuring equipment: Network analyzer R: Resonator FAR Family (C4 series G type) ■ STANDARD FREQUENCY Standard frequency (KHz) Package size Resonant resistance 8,000 10,000 G 100 Ω max. (Symbol: 5) 11,000 11,059 12,000 16,000 G 75 Ω max. (Symbol: 2) Note: • For oscillation frequency (in 8 to 16 MHz) other than standard, Fujitsu can also develop applicable part. • Resonant resistance of the part is specified according to applied frequency as above. ■ NOTES ON USE • • • • • • Handle carefully Solder under the following conditions. 5 seconds max. at 230°C (PCB) Do not apply extreme heat to the resonator. Recommended preheating is 150°C for one minute. Avoid extreme fluctuations in temperature during use. There is no specific direction in resonator mounting. Oscillation data should be examined when used in oscillation circuit with micon or other ICs. This is for reflow solder, not for flow solder. 3 FAR Family (C4 series G type) ■ PART NUMBERING SYSTEM FAR C4 C (1) (2) (3) R G (4) (5) (6) (7) (8) (9) (1) Series Series Single crystal Capacitor C4 LiNbO3 With built-in capacitors (2) Package Type Specification Type C Chip type Specification Size G G type(Ultra compact) (3) Package Size (4) Frequency (KHz) See “■ Standard Frequency.” [Example] 8.0 MHz 08000 (5) Initial Frequency Deviation Specification Deviation M ±0.5% (6) Built-in Capacitor Specification Capacitance 0 20±8 pF 1 10±4 pF (7) Resonant Resistance 4 Specification Resonant resistance 2 75 Ω max. 5 100 Ω max. FAR Family (C4 series G type) (8) User-specific Special Symbols Specification Description Name No specification, no taping specification — No specification, with taping specification A to Z Serial number for custom design (9) Taping Specification Specification Description R 12 mm width tape & reel ■ MARKING Fujitsu logo The stamp color varies according to built-in capacitor. Frequency (MHz) & Deviation Marking color F 12 A n 10 pF Yellow 20 pF White Lot No. (Date confirms to EIAJ. * ) *EIAJ RC1001 standard Year Jan Feb Mar 1993 A B C 1994 Q N P 1995 a b 1996 n Apr May Jun Jul Aug Sep Oct Nov Dec D R d r E S e F T f t G U H V v J W j K X L Y M Z u Note: The code on and after Jan 1997 is specified repeatedly from “A”. 5 FAR Family (C4 series G type) ■ PIN ASSIGNMENT (1) (2) (3) (1) (3) (2) ■ DIMENSIONS .200(5.1) .083(2.1) .059(1.5) .220(5.6) .035 (0.9) .063 (1.6) .018(0.47) .102(2.6) .035 (0.9) .040 (1.0) .040 (1.0) .006(0.15) .006(0.15) 6 Unit: inches (mm) FAR Family (C4 series G type) ■ TAPE & REEL DIMENSIONS .157±.004(4.0±0.1) .079±.004(2.0±0.1) φ.059±.004 0 (φ1.5± 0.1 ) 0 .012(0.3) .059 ±.004 (1.5±0.1) .217±.004 (5.5±0.1) .089±.004 (2.25±0.1) .472±.012 (12.0±0.3) 6.2±0.1 .089±.004 (2.25±0.1) φ.040±.004 0 (φ1.0± 0.1) 0 3.1±0.1 .315±.004 (8.0±0.1) .075(1.9) .055±.059 (14.0±1.5) φ3.150 (φ80) φ.827±.031 (φ21±0.8) φ12.992±.078 (φ330±2.0) .079±.020 (2.0±0.5) φ.512±.008 (φ13.0±0.2) R .039(1.0) .079±.020 (2.0±0.5) Unit: inches (mm) Reel quantity QTY/reel 3,000 pcs 7 FAR Family (C4 series G type) ■ RESONATOR BUSINESS FLOW CHART Oscillation frequency should be varied according to applied micro controller or another IC’s. Fujitsu should recommend the resonator parts considering matching condition with applied IC. Following shows business flow chart. CUSTOMER FJ RECEIVE INQUIRY TO CHECK APPLIED CPU AND AVAILABILITY OF MATCHING DATA MATCHING DATA AVAILABLE NO MATCHING DATA TO BORROW APPLIED CPU TO TAKE MATCHING DATA (3 WEEKS) TO SUBMIT DATA NECESSARY TO CHECK THE NECESSITY OF FREQUENCY ADJUSTMENT NOT NECESSARY REDESIGN (6 WEEKS) TO SUBMIT SAMPLE NOT OK EVALUATION OK TO SUBMIT SPEC SIGN AND SEND BACK 8 FAR Family (C4 series G type) FUJITSU LIMITED For further information please contact: Japan FUJITSU MEDIA DEVICES LIMITED Marketing and Technical Support Dept. SHINYOKOHAMA SQUARE BLDG 2-3-12,Shin-yokohama, Kouhoku-ku, Yokohama-shi, Kanagawa 222-0033, Japan Tel: +81-45-471-0067 Fax: +81-45-471-0069 http://www.fujitsu.co.jp/hypertext/fmd/English/index.html North and South America FUJITSU MICROELECTRONICS, INC. 3545 North First Street, San Jose, CA 95134-1804, U.S.A. Tel: +1-408-922-9000 Fax: +1-408-922-9179 Customer Response Center Mon. - Fri.: 7 am - 5 pm (PST) Tel: +1-800-866-8608 Fax: +1-408-922-9179 http://www.fujitsumicro.com/ Europe FUJITSU MICROELECTRONICS EUROPE GmbH Am Siebenstein 6-10, D-63303 Dreieich-Buchschlag, Germany Tel: +49-6103-690-0 Fax: +49-6103-690-122 http://www.fujitsu-fme.com/ Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE. LTD. #05-08, 151 Lorong Chuan, New Tech Park, Singapore 556741 Tel: +65-281-0770 Fax: +65-281-0220 http://www.fmap.com.sg/ F9703 FUJITSU LIMITED Printed in Japan All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before ordering. The information and circuit diagrams in this document are presented as examples of semiconductor device applications, and are not intended to be incorporated in devices for actual use. Also, FUJITSU is unable to assume responsibility for infringement of any patent rights or other rights of third parties arising from the use of this information or circuit diagrams. The contents of this document may not be reproduced or copied without the permission of FUJITSU LIMITED. FUJITSU semiconductor devices are intended for use in standard applications (computers, office automation and other office equipments, industrial, communications, and measurement equipments, personal or household devices, etc.). CAUTION: Customers considering the use of our products in special applications where failure or abnormal operation may directly affect human lives or cause physical injury or property damage, or where extremely high levels of reliability are demanded (such as aerospace systems, atomic energy controls, sea floor repeaters, vehicle operating controls, medical devices for life support, etc.) are requested to consult with FUJITSU sales representatives before such use. The company will not be responsible for damages arising from such use without prior approval. Any semiconductor devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export of those products from Japan.