Technical Data Sheet 0603 Package Chip LED (0.3mm Height) 19-218/T1D-CQ2R2TY/3T Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 19-218 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide Chip Part No. Emitted Color Resin Color Pure White Yellow Diffused Material 19-218/T1D-CQ2R2TY/3T Revision InGaN Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0002212 Prepared date:02-Sep-2009 :1 LifecyclePhase: Rev.1 Page: 1 of 12 Prepared by: Esther Yan Release Date:2009-09-03 11:55:19.0 Expired Period: Forever 19-218/T1D-CQ2R2TY/3T Package Outline Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0002212 Prepared date: 02-Sep-2009 :1 LifecyclePhase: Rev.1 Page: 2 of 12 Prepared by: Esther Yan Release Date:2009-09-03 11:55:19.0 Expired Period: Forever 19-218/T1D-CQ2R2TY/3T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA IFP 100 mA Power Dissipation Pd 110 mW Electrostatic Discharge(HBM) ESD 150 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Peak Forward Current (Duty 1/10 @1KHz) Reflow Soldering : 260 ℃ for 10 sec. Revision Hand Soldering : 350 ℃ for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0002212 Prepared date: 02-Sep-2009 :1 LifecyclePhase: Rev.1 Page: 3 of 12 Prepared by: Esther Yan Release Date:2009-09-03 11:55:19.0 Expired Period: Forever 19-218/T1D-CQ2R2TY/3T Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Luminous Intensity Iv 90.0 ----- 180 mcd Viewing Angle 2θ1/2 ----- 130 ----- deg Forward Voltage VF 2.60 ----- 3.00 V Reverse Current IR ----- ----- 50 μA Condition IF=5mA VR=5V Bin Range Of Luminous Intensity & Forward Voltage Symbol IV VF Bin Code Min. Max. Q2 90.0 112 R1 112 140 R2 140 180 28 2.60 2.70 29 2.70 2.80 30 2.80 2.90 31 2.90 3.00 Unit Condition mcd IF=5mA V IF=5mA Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Forward Voltage ±0.05V Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0002212 Prepared date: 02-Sep-2009 :1 LifecyclePhase: Rev.1 Page: 4 of 12 Prepared by: Esther Yan Release Date:2009-09-03 11:55:19.0 Expired Period: Forever 19-218/T1D-CQ2R2TY/3T Chromaticity Coordinates Specifications for Bin Grading Group Bin Code 1 2 C 3 4 CIE_x CIE_y Condition 0.274 0.274 0.294 0.294 0.274 0.274 0.294 0.294 0.294 0.294 0.314 0.314 0.294 0.294 0.314 0.314 0.226 0.258 0.286 0.254 0.258 0.291 0.319 0.286 0.254 0.286 0.315 0.282 0.286 0.319 0.347 0.315 IF= 5mA Notes: 1.The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01). 2.The products are sensitive to static electricity and care must be fully taken when handling products. Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0002212 Prepared date: 02-Sep-2009 :1 LifecyclePhase: Rev.1 Page: 5 of 12 Prepared by: Esther Yan Release Date:2009-09-03 11:55:19.0 Expired Period: Forever 19-218/T1D-CQ2R2TY/3T CIE Chromaticity Diagram Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0002212 Prepared date: 02-Sep-2009 :1 LifecyclePhase: Rev.1 Page: 6 of 12 Prepared by: Esther Yan Release Date:2009-09-03 11:55:19.0 Expired Period: Forever 19-218/T1D-CQ2R2TY/3T Typical Electro-Optical Characteristics Curves Forward Current vs. Forward Voltage Ta=25°C 100 Ta=25°C Forward Current IF (mA) Relative luminous intensity (%) Spectrum Distribution 75 50 25 0 400 500 600 700 800 Forward Voltage VF (V) Wavelength λ (nm) Luminous Intensity vs. Luminous Intensity vs. Forward Current Ta=25°C Relative luminous intensity (% ) Relative luminous intensity (% ) Ambient Temperature Forward Current I F (mA) Ambient Temperature Ta (°C) Radiation Diagram Ta=25°C Forward Current I F (mA) Forward Current Derating Curve Ambient Temperature Ta (°C) Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0002212 Prepared date: 02-Sep-2009 :1 LifecyclePhase: Rev.1 Page: 7 of 12 Prepared by: Esther Yan Release Date:2009-09-03 11:55:19.0 Expired Period: Forever 19-218/T1D-CQ2R2TY/3T Label Explanation CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank Pb EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0002212 Prepared date: 02-Sep-2009 :1 LifecyclePhase: Rev.1 Page: 8 of 12 Prepared by: Esther Yan Release Date:2009-09-03 11:55:19.0 Expired Period: Forever 19-218/T1D-CQ2R2TY/3T Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Revision Aluminum moisture-proof bag Desiccant Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0002212 Prepared date: 02-Sep-2009 :1 LifecyclePhase: Label Rev.1 Page: 9 of 12 Prepared by: Esther Yan Release Date:2009-09-03 11:55:19.0 Expired Period: Forever 19-218/T1D-CQ2R2TY/3T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Ac/Re Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Max. 10sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 2 3 High Temperature Storage Low Temperature Storage 4 5 Revision Test Sample Hours/Cycles Size No. 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0002212 Prepared date: 02-Sep-2009 :1 LifecyclePhase: Rev.1 Page: 10 of 12 Prepared by: Esther Yan Release Date:2009-09-03 11:55:19.0 Expired Period: Forever 19-218/T1D-CQ2R2TY/3T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 2 60°C M ax. 1 0sec. M ax . A bo ve25 5°C 3 0sec.M ax . 3° C /sec.M ax. P re-heating 6°C /sec.M ax. A bove 217°C 60~ 15 0sec. 1 50~ 200°C 60~ 120sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0002212 Prepared date: 02-Sep-2009 :1 LifecyclePhase: Rev.1 Page: 11 of 12 Prepared by: Esther Yan Release Date:2009-09-03 11:55:19.0 Expired Period: Forever 19-218/T1D-CQ2R2TY/3T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Revision Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0002212 Prepared date: 02-Sep-2009 :1 LifecyclePhase: Rev.1 Page: 12 of 12 Prepared by: Esther Yan Release Date:2009-09-03 11:55:19.0 Expired Period: Forever