SILENT POWER RELAY 1 POLE— 78A/120A INRUSH CURRENT TYPE FTR-H3 SERIES RoHS compliant n FEATURES Pin compatible with widely used VS and FTR-H1 series power relays l Ultra silent relay with patented unique U-shape spring. Noise level is about 50dB at 5cm. l Low profile (height 16.5 mm)/ cadmium free contacts l High isolation in small package —Insulation distance : 8 mm (between coil and contacts) —Dielectric strength : 5,000 VAC —Surge strength :10,000 V l An electric life of 100,000 operations at rated load (10A, 250VAC, cos Phi 1) and satisfy at TV-5 standard. l Low coil power (530mW) l UL (conforms to UL508, 873), CSA (conforms to CSA22.2 No.14), VDE (conforms to VDE 0435, 0631, 0700, 0860) l Conforms to FIMKO, DEMKO lSealed type relay l Complies with TV-5 / TV-8 Inrush 78A (TV-5)/ 120A (TV-8) l n ORDERING INFORMATION [Example] FTR-H3 A A 012 V (a) (b) (c) (d) (e) (a) Series Name FTR-H3: FTR-H3 Series (b) Contact Arrangement A : 1 form A (SPST-NO) (c) Coil Type A : Standard type (530 mW) (d) Nominal Voltage 005 009 : 5 VDC : 9 VDC (e) Contact Material/TV TypeT V T : Silver tin oxide +TV-5 rating : Silver tin oxide +TV-8 rating Ordering Code FTR-H3AA05V 012 024 : 12 VDC : 24 VDC Actual Marking H3AA05V 1 FTR-H3 SERIES n PART NUMBERS Ordering Part Number Series Coil Power Contact Coil Voltage FTR-H3AA005V 5 FTR-H3AA009V 9 FTR-H3AA012V FTR-H3AA024V FTR-H3AA005T FTR-H3 1 form A FTR-H3AA009T A: Standard (530 mW) 12 Contact Material V: Silver tin oxide (TV-5) 24 5 9 FTR-H3AA012T 12 FTR-H3AA024T 24 T: Silver tin oxide (TV-8) n COIL DATA CHART Coil Voltage Nominal Voltage (VDC) Max. Coil Voltage*1 Coil Resistance ( ±10%) Must Operate Voltage*2 Must Release Voltage*2 005 5 8.2 VDC 47 Ω 3.5 VDC 0.5 VDC 009 9 9.9 VDC 155 Ω 6.3 VDC 0.9 VDC 012 12 19.8 VDC 270 Ω 8.4 VDC 1.2 VDC 024 24 39.6 VDC 1,100 Ω 16.80 VDC 2.2 VDC Nominal Power (±10%) 530 mW Note: All values in the table are measured at 20°C. *1: No contact current at 20°C *2: Specified values are subject to pulse wave voltage FTR-H3 SERIES n SPECIFICATIONS Item Contact Coil FTR-H3 AA ( ) V Arrangement 1 form A (SPST-NO) Material Silver tin oxide (movable: gold plated) Style Single Resistance (initial) Maximum 100 mΩ at 6 VDC, 1 A Rating 10 A, 250 VAC / 30 VDC Maximum Carrying Current*1 14A Maximum Switching Power 2,500 VA / 300W Maximum Switching Voltage 400VAC / 300VDC Maximum Switching Load*2 10mA 5VDC Maximum Inrush Current 78A 120VAC (at lamp load) Nominal Power (at 20˚C) 530 mW Operate Power (at 20˚C) 260 mW Operating Temperature -40ºC to +75ºC (no frost) Time Value Operate Time (without diode) Life Maximum 10 ms (at nominal voltage, without bounce) Release Time (without diode) Maximum 5 ms (at nominal voltage, without bounce) Mechanical 2 x 107 operations minimum AC resistive 1 x 105 operations minimum DC resistive 1 x 105 operations minimum Lamp TV-5 Vibration Resistance Misoperation 10 to 55 Hz, at double amplitude of 1.65 mm Endurance 10-55Hz, at double amplitude of 3.3 mm Shock Resistance Misoperation Electrical Other FTR-H3 AA ( ) T Endurance TV-8 Min. 100m/s2 (11±1ms) Min. 1,000m/s2 (6±1ms) Weight Approximately 12g Average sound pressure Approximately 50dB at 5cm *1 When maximum carrying current is more than 10A, PCB layout needs to be considered. *2 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. n INSULATION Item FTR-H3 Note Resistance (initial) Minimum 1,000 MΩ 1 min. at 500 VDC Dielectric Strength open contacts 1,000 VAC (50/60 Hz) 1 min. coil and contacts 5,000 VAC (50/60 Hz) 1 min. Surge Voltage (coil and contact) 10,000 V Clearance/Creepage 8 mm / 8 mm Insulation (DIN EN61810-1 VDE0435) Voltage Pollution Isolation material group 250 V 2 IIIa 1.2 x 50µs standard wave Isolation category / Reference voltage (VDE01106) B / 250 V FTR-H3 SERIES n SAFETY STANDARDS Type Compliance Contact rating UL UL 508 Flammability: UL 94-V0 (plastics) 10A, 30 VDC/ 277 VAC (resistive) 1/3 HP, 125VAC 1/2 HP, 250VAC TV-5, 120VAC TV-8, 120VAC/240VAC (T type) Pilot duty: B300, Q300 (T type) E63614 CSA C22.2 No. 14 LR 40304 VDE 0435, 0860, 0700, 0631 10A, 250 VAC (cosØ=1) 3A, 250 VAC (cosØ=0.4) 10A, 30 VDC (0ms) 5/80A, 250 VAC (V-type) 8/120A, 250VAC (T type) Complies with CQC n REFERENCE DATA Coil Temperature Rise Operating Range 80 14A 60 10A 40 0A 20 0 0 0.2 0.6 0.8 1 1.6 1.4 0A 1.2 1.0 ltage vo perate ust o M 0.8 oil) (hot c oltage te v t opera Mus 0.6 0 20 40 60 90 AC250V/DC24V 80 Distribution (%) DC30V τ=7ms 10 5 AC250V Cosφ=0.4 DC30V τ=15mS 4 6 8 Contact Load (A) 10 AC resistive 5 2 1 DC resistive 0.5 10 20 Release 60 12 50 40 30 0 100 200 500 1000 Distribution of Contact Resistance 90 Operate 70 50 Contact Voltage (V) 100 FTR-H3 N=100 80 Make 70 60 50 40 30 20 10 10 2 10 100 20 0 FTR-H3 20 0.2 FTR-H3AA012V N=100 80 AC250V Cosφ=0.7 2 coil) Distribution of Operate & Release Voltage 100 50 20 (cool 50 Ambient Temperature (ºC) FTR-H3 1 1.8 1.2 Life Curve 100 Service Life (x104 operations) 0.4 Coil Power (W) FTR-H3 2.0 Distribution (%) Temperature Rise (deg.) FTR-H3 Maximum Switching Power 100 2.2 Contact Current (A) Nominal Voltage Mult. Factor 100 0 0 10 20 30 40 50 60 70 80 Nominal Voltage Mult. Factor (%) 0 1 2 3 4 5 6 7 8 9 10 Contact Resistance (mΩ) FTR-H3 SERIES n DIMENSIONS 28.8 +0.2 0.5 18.8 +0.2 13.7 +0.3 3.3 Pre-solder 0.9 0.3 20 3.5 0.2 7.5 0.25 1 (2.75) 2 1 l Schematics (BOTTOM VIEW) NO COM l PC board mounting hole layout (BOTTOM VIEW) (2.75) (28.8) 20 4-Ø1.3 3 3.5 (3.1) 7.5 (13.7) 4 Orientation mark Unit: mm FTR-H3 SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condtion Flow Solder condtion: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. FTR-H3 SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. November 28, 2007