VF SERIES POWER RELAY 1 POLE—20, 25, 30 A (HEAVY POWER CONTROL) VF SERIES RoHS compliant n FEATURES l UL, CSA, VDE recognized TV-15 rated l 1 Form A (SPST-NO) contact l Heavy duty 20 to 30 A small power relay l High inrush current and high surge voltage —Inrush current 65 A —Surge strength 10,000 V l Printed circuit coil terminals type available l Small package meets high density mounting requirement l RoHS compliant since date code: 0435L2 Please see page 7 for more information n ORDERING INFORMATION [Example] VF (a) B – 6 H U (b) (*) (c) (d) (e) (a) Series Name VF: VF Series Nil: Top ·······All tab-terminal B : Top ·······Tab-terminal (contacts) : Bottom···PCB-terminal (coil and movable contact) (b) Terminal D : Top ·······Tab-terminal (coil) Screw tight terminal (contacts) P : Top ·······Screw tight terminal (contacts) : Bottom···PCB terminal (coil and movable contact) (c) Nominal Voltage Refer to the COIL DATA CHARAT (d) Contact Rating H : 30 A (applicable for D.P.) M: 25 A L : 20 A (e) U : UL, CSA, VDE rating acquired Standard Note: Actual marking omits hyphen (-) of (*) VF SERIES n COIL DATA CHART MODEL Nominal voltage 30 A Type 25 A Type 20 A Type Coil resistance (±10%) Must operate voltage Must release voltage Nominal power VF (D or P) - 3H VF ( ) - 3M VF ( ) - 3L 3 VDC 7.5Ω 2.1 VDC 0.3 VDC 1,200 mW VF (D or P) - 5H VF ( ) - 5M VF ( ) - 5L 5 VDC 20 Ω 3.5 VDC 0.5 VDC VF (D or P) - 6H VF ( ) - 6M VF ( ) - 6L 6 VDC 30 Ω 4.2 VDC 0.6 VDC 1,200 mW VF (D or P) - 9H VF ( ) - 9M VF ( ) - 9L 9 VDC 67 Ω 6.3 VDC 0.9 VDC 1,200 mW VF (D or P) -12H VF ( ) -12M VF ( ) -12L 12 VDC 120 Ω 8.4 VDC 1.2 VDC 1,200 mW VF (D or P) -18H VF ( ) -18M VF ( ) -18L 18 VDC 270 Ω 12.6 VDC 1.8 VDC 1,200 mW VF (D or P) -24H VF ( ) -24M VF ( ) -24L 24 VDC 480 Ω 16.8 VDC 2.4 VDC 1,200 mW VF (D or P) -48H VF ( ) -48M VF ( ) -48L 48 VDC 1,920 Ω 33.6 VDC 4.8 VDC 1,200 mW VF (D or P) -60H VF ( ) -60M VF ( ) -60L 60 VDC 3,000 Ω 42.0 VDC 6.0 VDC 1,200 mW 1,250 mW Note: All values in the table are measured at 20°C VF SERIES n SPECIFICATIONS 30 A Type Item VFD, VFP- ( ) H Contact Arrangement1 form A (SPST-NO) 25 A Type 20 A Type VF ( ) - ( ) M VF ( ) - ( ) L Material Silver alloy Style Single Resistance (initial) Maximum 30m Ω (at 1 A 6 VDC) Rating Resistive 30 A 250 VAC Motor 2 HP 250 VAC 1.5 HP 250 VAC Maximum Carrying Current 30 A 25 A 20 A Maximum Switching Power 7,500 VA 6,250 VA 5,000 VA Maximum Switching Voltage 250 VAC Maximum Switching Current 30 A 25 A 20 A Minimum Switching Load* 1A, 10V Coil Nominal Power (at 20°C) 1,200 to 1,250 mW Operate Power (at 20°C) 1,590 to 620 mW Operating Temperature –30°C to +65°C (no frost) (refer to the CHARACTERISTIC DATA) Time Value Operate (at nominal voltage) Maximum 20 ms Release (at nominal voltage) Maximum 5 ms Life Mechanical 5 × 106 operations minimum 1 25 A 250 VAC 20 A 250 VAC 1 HP 250 VAC 1 × 105 operations minimum (resistive load) Electrical (at contact rating) 2 × 105 operations minimum (motor load) Other Vibration Resistance Shock Resistance Weight *1 Misoperation 10 to 55 Hz (double amplitude of 1.5 mm) Endurance Misoperation 10 to 55 Hz (double amplitude of 1.5 mm) 200 m/s2 (11 ±1 ms) Endurance1,000 m/s2 ( 6 ±1 ms) Approximately 55 g Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. n INSULATION Item 30A Resistance (initial) Minimum 1,000 MΩ 1 min. Dielectric Strength open contacts 1,200 VAC 1 min. coil and contacts 4,000 VAC 1 min. Surge Voltage (coil and contact) 10,000 V 25A 20A Note at 500 VDC 1.2 x 50µs standard wave VF SERIES n SAFETY STANDARD AND FILE NUMBERS Type Compliance Contact rating UL UL 508 873 Flammability: UL 94-V0 (plastics) [VF-( )-( ) L] 20A, 250VAC (resistive) 1hp, 250VAC/125VAC TV-15 120 VAC [VF-( )-( ) M] 25A, 250VAC (resistive) 1.5 hp, 250VAC TV-15 120VAC [VFD, VFP-( )-H] 30A, 250VAC (resistive) 2 hp, 250VAC TV-15 120VAC E56140 CSA C22.2 No. 14 LR 35579 VDE 0435 n CHARACTERISTIC DATA VF SERIES n REFERENCE DATA n DIMENSIONS l Dimensions l Schematics l PC board mounting hole layout VF type Unit: mm VF SERIES l Dimensions VFB type l Schematics l PC board mounting hole layout VFD type VFP type Unit: mm VF SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and most power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists. Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Reflow Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C soler bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical realys. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. VF SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. February 4, 2008.