195D Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated FEATURES • 8 mm, 12 mm Tape Packaging to EIA-481-1 reeling per IEC 286-3. 7’ (178 mm) standard 13" (330 mm) available • US and European case sizes available Pb-free Available RoHS* COMPLIANT PERFORMANCE CHARACTERISTICS Capacitance Range: 0.1 µF to 330 µF Capacitance Tolerance: ± 10 %, ± 20 % standard Voltage Rating: 2 WVDC to 50 WVDC Operating Temperature: - 55 °C to + 85 °C (To + 125 °C with voltage derating) NOTE: Refer to Doc 40088 ORDERING INFORMATION 195D TYPE 106 CAPACITANCE X0 CAPACITANCE TOLERANCE 004 DC VOLTAGE RATING AT + 85 °C S CASE CODE 2 TERMINATION T PACKAGING T = Tape and Reel Style 2 is 7" [178 mm] Reel standard standard 2 = 100 % Tin 1/2" Reel minimum 4 = Gold Plated 13" [330] Reel 8 = Solder available excluding Plated (60/40) the "R" case, on Special Order request. See Tape and Reel Note: Preferred Tolerance and reel sizes are in bold. Specifications. We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage substitutions will be marked with the higher voltage rating. X0 = ± 20 % X9 = ± 10 % This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. See Ratings and Case Codes Table This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an "R" (6R3 = 6.3 volts). DIMENSIONS in inches [millimeters] Tantalum Wire Nib Identifies Anode (+) Terminal W L B D J J A H CASE CODE EIA SIZE L (Max.) W H A B 0.087 0.045 ± 0.010 0.045 ± 0.010 0.016 ± 0.008 0.042 ± 0.010 [2.21] [1.14 ± 0.25] [1.14 ± 0.25] [0.40 ± 0.20] [1.07 ± 0.25] 0.283 0.235 ± 0.012 0.136 ± 0.012 0.051 ± 0.012 0.180 ± 0.025 R 7257 [7.2] [6.0 ± 0.3] [3.5 ± 0.3] [1.3 ± 0.3] [4.6 ± 0.6] 0.143 0.072 ± 0.008 0.048 ± 0.008 0.023 ± 0.010 0.085 ± 0.015 S 3518 [3.63] [1.83 ± 0.20] [1.22 ± 0.20] [0.58 ± 0.25] [2.16 ± 0.37] 0.143 0.104 ± 0.010 0.051 ± 0.010 0.023 ± 0.010 0.085 ± 0.015 V 3527 [3.63] [2.65 ± 0.25] [1.30 ± 0.25] [0.58 ± 0.25] [2.16 ± 0.37] 0.285 0.104 ± 0.010 0.051 ± 0.010 0.040 ± 0.020 0.200 ± 0.027 X 7227 [7.24] [2.65 ± 0.25] [1.30 ± 0.25] [1.00 ± 0.50] [5.08 ± 0.69] 0.285 0.104 ± 0.010 0.069 ± 0.010 0.040 ± 0.020 0.200 ± 0.027 Y 7227 [7.24] [2.65 ± 0.25] [1.75 ± 0.25] [1.00 ± 0.50] [5.08 ± 0.69] 0.285 0.104 ± 0.010 0.104 ± 0.010 0.040 ± 0.020 0.200 ± 0.023 Z 7227 [7.24] [2.65 ± 0.25] [2.65 ± 0.25] [1.00 ± 0.50] [5.08 ± 0.59] Note: The anode termination (D less B) will be a minimum of 0.010 (0.25), C Case = 0.005 (0.131) minimum C N/A D (Ref.) J (Max.) 0.063 [1.60] 0.243 [6.20] 0.115 [2.90] 0.115 [2.90] 0.243 [6.20] 0.243 [6.20] 0.243 [6.20] 0.004 [0.10] 0.004 [0.10] 0.004 [0.10] 0.004 [0.10] 0.004 [0.10] 0.004 [0.10] 0.004 [0.10] * Pb containing terminations are nor RoHS compliant, exemptions may apply www.vishay.com 1 For technical questions, contact: [email protected] Document Number: 40001 Revision: 16-May-06 195D Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated Vishay Sprague RATINGS AND CASE CODES µF 4V 6.3 V 10 V 16 V 20 V 25 V 35 V 50 V 0.10 C 0.15 C 0.22 C 0.33 C 0.47 0.68 1.0 1.5 2.2 S C S V C S S V C S S S X C S S S V X C S S S V X Y 3.3 C S S S V X Y Z 4.7 S S S V X X Z Z 6.8 S S V X X Y Z R 10 S V X X Y Y Z R 15 V X X Y Z Z R R 22 X X Y Z Z R 33 X Y Z Z R R 47 Y Y Z R R 68 Y Z R R 100 Z Z R 120 R R R 150 R R R 180 R R 220 R R 330 R STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER* Max. DCL at + 25 °C (µA) Max. DF at + 25 °C 120 Hz (%) 4 WVDC AT + 85 °C, SURGE = 5 V . . . 2.7 WVDC AT + 125 °C, SURGE = 3.4 V 3.3 C 195D335X_004C2T 0.5 6 4.7 S 195D475X_004S2T 0.5 6 6.8 S 195D685X_004S2T 0.5 6 10 S 195D106X_004S2T 0.5 6 15 V 195D156X_004V2T 0.6 6 22 X 195D226X_004X2T 0.9 6 33 X 195D336X_004X2T 1.3 6 47 Y 195D476X_004Y2T 1.9 6 68 Y 195D686X_004Y2T 2.7 6 100 Z 195D107X_004Z2T 4.0 8 120 R 195D127X_004R2T 4.8 8 150 R 195D157X_004R2T 6.0 8 180 R 195D187X_004R2T 7.2 8 220 R 195D227X_004R2T 8.8 8 330 R 195D337X_004R2T 13.2 8 For 10 % tolerance, specify “9“: for 20 % tolerance, change to “0“. Document Number: 40001 Revision: 16-May-06 For technical questions, contact: [email protected] www.vishay.com 2 195D Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated Vishay Sprague STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER* Max. DCL at + 25 °C (µA) Max. DF at + 25 °C 120 Hz (%) 6.3 WVDC AT + 85 °C, SURGE = 8 V . . . 4 WVDC AT + 125 °C, SURGE = 5 V 2.2 C 195D225X_6R3C2T 0.5 6 3.3 S 195D335X_6R3S2T 0.5 6 4.7 S 195D475X_6R3S2T 0.5 6 6.8 S 195D685X_6R3S2T 0.5 6 10 V 195D106X_6R3V2T 0.6 6 15 X 195D156X_6R3X2T 0.9 6 22 X 195D226X_6R3X2T 1.3 6 33 Y 195D336X_6R3Y2T 2.0 6 47 Y 195D476X_6R3Y2T 2.8 6 68 Z 195D686X_6R3Z2T 4.1 6 100 Z 195D107X_6R3Z2T 6.0 8 120 R 195D127X_6R3R2T 7.2 8 150 R 195D157X_6R3R2T 9.0 8 180 R 195D187X_6R3R2T 10.8 8 220 R 195D227X_6R3R2T 13.2 8 10 WVDC AT + 85 °C, SURGE = 13V . . . 7 WVDC AT + 125 °C, SURGE = 9 V 1.5 C 195D155X_010C2T 0.5 6 2.2 S 195D225X_010S2T 0.5 6 3.3 S 195D335X_010S2T 0.5 6 4.7 S 195D475X_010S2T 0.5 6 6.8 V 195D685X_010V2T 0.7 6 10 X 195D106X_010X2T 1.0 6 15 X 195D156X_010X2T 1.5 6 22 Y 195D226X_010Y2T 2.2 6 33 Z 195D336X_010Z2T 3.0 6 6 47 Z 195D476X_010Z2T 4.7 68 R 195D686X_010R2T 6.8 6 100 R 195D107X_010R2T 10 8 120 R 195D127X_010R2T 12 8 R 195D157X_010R2T 15 8 150 16 WVDC AT + 85 °C, SURGE = 20 V . . . 10 WVDC AT + 125 °C, SURGE = 12 V 1.0 C 195D105X_016C2T 0.5 4 1.5 S 195D155X_016S2T 0.5 6 2.2 S 195D225X_016S2T 0.5 6 3.3 S 195D335X_016S2T 0.5 6 4.7 V 195D475X_016V2T 0.7 6 6.8 X 195D685X_016X2T 1.0 6 10 X 195D106X_016X2T 1.5 6 15 Y 195D156X_016Y2T 2.3 6 22 Z 195D226X_016Z2T 3.3 6 6 33 Z 195D336X_016Z2T 5.0 47 R 195D476X_016R2T 7.1 6 68 R 195D686X_016R2T 10.2 6 For 10 % tolerance, specify “9“: for 20 % tolerance, change to “0“. www.vishay.com 3 For technical questions, contact: [email protected] Document Number: 40001 Revision: 16-May-06 195D Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated Vishay Sprague STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER* Max. DCL at + 25 °C (µA) Max. DF at + 25 °C 120 Hz (%) 20 WVDC AT + 85 °C, SURGE = 26 V . . . 13 WVDC AT + 125 °C, SURGE = 16 V 0.68 C 195D684X_020C2T 0.5 4 1.0 S 195D105X_020S2T 0.5 4 1.5 S 195D155X_020S2T 0.5 6 2.2 S 195D225X_020S2T 0.5 6 3.3 V 195D335X_020V2T 0.7 6 4.7 X 195D475X_020X2T 0.9 6 6.8 X 195D685X_020X2T 1.4 6 10 Y 195D106X_020Y2T 2.0 6 15 Z 195D156X_020Z2T 3.0 6 22 Z 195D226X_020Z2T 4.4 6 33 R 195D336X_020R2T 6.6 6 R 195D476X_020R2T 9.4 6 47 25 WVDC AT + 85 °C, SURGE = 32 V . . . 17 WVDC AT + 125 °C, SURGE = 20 V 0.47 C 195D474X_025C2T 0.5 0.68 S 195D684X_025S2T 0.5 4 4 1.0 S 195D105X_025S2T 0.5 4 1.5 S 195D155X_025S2T 0.5 6 2.2 V 195D225X_025V2T 0.6 6 3.3 X 195D335X_025X2T 0.8 6 4.7 X 195D475X_025X2T 1.2 6 6.8 Y 195D685X_025Y2T 1.7 6 10 Y 195D106X_025Y2T 2.5 6 15 Z 195D156X_025Z2T 3.8 6 22 R 195D226X_025R2T 5.5 6 33 R 195D336X_025R2T 8.3 6 35 WVDC AT + 85 °C, SURGE = 46 V . . . 23 WVDC AT + 125 °C, SURGE = 28 V 0.33 C 195D334X_035C2T 0.5 4 0.47 S 195D474X_035S2T 0.5 4 0.68 S 195D684X_035S2T 0.5 4 1.0 S 195D105X_035S2T 0.5 4 1.5 V 195D155X_035V2T 0.5 6 2.2 X 195D225X_035X2T 0.8 6 3.3 Y 195D335X_035Y2T 1.2 6 4.7 Z 195D475X_035Z2T 1.6 6 6.8 Z 195D685X_035Z2T 2.4 6 10 Z 195D106X_035Z2T 3.5 6 15 R 195D156X_035R2T 5.3 6 22 R 195D226X_035R2T 7.7 6 For 10 % tolerance, specify “9“: for 20 % tolerance, change to “0“. Document Number: 40001 Revision: 16-May-06 For technical questions, contact: [email protected] www.vishay.com 4 195D Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated Vishay Sprague STANDARD RATINGS CAPACITANCE (µF) CASE CODE Max. DF at + 25 °C 120 Hz (%) Max. DCL at + 25 °C (µA) PART NUMBER* 50 WVDC AT + 85 °C, SURGE = 65 V . . . 33 WVDC AT + 125 °C, SURGE = 38 V 0.1 C 195D104X_050C2T 0.5 4 0.15 C 195D154X_050C2T 0.5 4 0.22 C 195D224X_050C2T 0.5 4 0.33 S 195D334X_050S2T 0.5 4 0.47 V 195D474X_050V2T 0.5 4 0.68 V 195D684X_050V2T 0.5 4 1.0 X 195D105X_050X2T 0.5 4 1.5 X 195D155X_050X2T 0.8 6 2.2 Y 195D225X_050Y2T 1.1 6 3.3 Z 195D335X_050Z2T 1.7 6 4.7 Z 195D475X_050Z2T 2.4 6 6.8 R 195D685X_050R2T 3.4 6 10 R 195D106X_050R2T 5.0 6 For 10 % tolerance, specify “9“: for 20 % tolerance, change to “0“. TYPICAL CURVES AT + 25 °C, IMPEDANCE AND ESR VS. FREQUENCY "S" Case "V" Case IMPEDANCE ESR 10 1 µF - 35 VDC IMPEDANCE ESR 100 OHMS OHMS 100 10 .47 μF - 50 VDC 1 1 4.7 µF - 10 VDC 15 μF - 4 VDC 0.1 1K 10K 100K 1M 10M 100M 0.1 1K 10K FREQUENCY IN HERTZ www.vishay.com 5 For technical questions, contact: [email protected] 100K 1M 10M 100M FREQUENCY IN HERTZ Document Number: 40001 Revision: 16-May-06 195D Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated Vishay Sprague TYPICAL CURVES AT + 25 °C, IMPEDANCE AND ESR VS. FREQUENCY "X" Case "Y" Case 1000 100 IMPEDANCE ESR IMPEDANCE ESR 100 10 OHMS OHMS 10 6.8 µF - 20 VDC 1 22 µF - 10 VDC 1 0.1 0.1 10 µF - 16 VDC 0.01 100 1K 10K 47 µF - 6.3 VDC 100K 1M 0.01 100 10M 1K 10K FREQUENCY IN HERTZ 100K 1M 10M FREQUENCY IN HERTZ "Z" Case 100 IMPEDANCE ESR OHMS 10 4.7 µF - 50 VDC 1 0.1 100 µF - 6.3 VDC 0.01 100 1K 10K 100K 1M 10M FREQUENCY IN HERTZ Document Number: 40001 Revision: 16-May-06 For technical questions, contact: [email protected] www.vishay.com 6 195D Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated Vishay Sprague ORDERING INFORMATION - EUROPEAN USE ONLY 195D TYPE 106 CAPACITANCE X0 CAPACITANCE TOLERANCE 004 DC VOLTAGE RATING AT + 85 °C D CASE CODE 2 TERMINATION T PACKAGING This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. X0 = ± 20 % X9 = ± 10 % This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an "R" (6R3 = 6.3 volts). See Ratings and Case Codes Table T = Tape and Reel Style 2 is 180 mm Reel standard standard 2 = Solderable See Tape and Reel Coating 4 = Gold Plated Specifications. 8 = Solder Plated (60/40) Special Order Note: Preferred Tolerance and reel sizes are in bold. We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage substitutions will be marked with the higher voltage rating. DIMENSIONS in millimeters Tantalum Wire Nib Identifies Anode (+) Terminal W C L B D J J A H CASE CODE L ± 0.3 W ± 0.3 H (max) A ± 0.3 B ± 0.3 C (min) A 2.8* 1.5 1.4 0.7 1.6 0.3 B 4.2* 1.4 1.6 0.8 2.5 0.3 D 4.2* 2.1 1.6 0.8 2.5 0.5 E 5.5 2.1 1.7 1.0 3.2 0.8 F 5.0 3.3 2.0 1.0 3.6 0.8 G 7.0 2.6 2.8 1.0 4.5 0.8 H 7.8 3.7 3.0 1.0 5.0 0.8 * ± 0.2 Note: The anode termination (D less B) will be a minimum of 0.010 (0.25), C Case = 0.005 (0.131) minimum www.vishay.com 7 For technical questions, contact: [email protected] Document Number: 40001 Revision: 16-May-06 195D Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated Vishay Sprague 195D STANDARD RANGE, RATINGS AND CASE CODES µF 2V 4V 6.3 V 10 V 15 V 20 V 25 V 35 V 50 V 0.10 A A 0.15 A A 0.22 A B 0.33 A 0.47 A 0.68 A A 1.0 A 1.5 A 2.2 A 3.3 A 4.7 A 6.8 A 10 A B B D F F 22 F 33 F G G 100 H D D D E D E F E F F F G F G H G H G G G G 47 68 F B B D E E E E E D D D D B B B B 15 B B H H H H H STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER Max. DCL at + 25 °C (µA) Max. DF at + 25 °C 120 Hz (%) 2 WVDC AT + 85 °C, SURGE = 2.6 V . . . 1.2 WVDC AT + 125 °C, SURGE = 1.6 V 3.3 A 195D335X_002A2T 0.5 8 4.7 A 195D475X_002A2T 0.5 8 6.8 A 195D685X_002A2T 0.5 8 10 A 195D106X_002A2T 0.6 8 4 WVDC AT + 85 °C, SURGE = 5 V . . . 2.7 WVDC AT + 125 °C, SURGE = 3.4 V 2.2 A 195D225X_004A2T 0.5 8 4.7 B 195D475X_004B2T 0.5 8 10 D 195D106X_004D2T 0.5 8 15 E 195D156X_004E2T 0.6 8 8 33 F 195D336X_004F2T 1.3 68 G 195D686X_004G2T 2.7 8 100 H 195D107X_004H2E 4.0 8 6.3 WVDC AT + 85 °C, SURGE = 8 V . . . 4 WVDC AT + 125 °C, SURGE = 5 V 1.5 A 195D155X_6R3A2T 0.5 8 3.3 B 195D335X_6R3B2T 0.5 8 6.8 D 195D685X_6R3D2T 0.5 8 10 E 195D106X_6R3E2T 0.6 8 8 22 F 195D226X_6R3F2T 1.3 47 G 195D476X_6R3G2T 2.8 8 68 H 195D686X_6R3H2E 4.1 8 For 10 % tolerance, specify “9“: for 20 % tolerance, change to “0“. Document Number: 40001 Revision: 16-May-06 For technical questions, contact: [email protected] www.vishay.com 8 195D Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated Vishay Sprague STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER Max. DCL at + 25 °C (µA) Max. DF at + 25 °C 120 Hz (%) 10 WVDC AT + 85 °C, SURGE = 13 V . . . 7 WVDC AT + 125 °C, SURGE = 9 V 1.0 A 195D105X_010A2T 0.5 6 2.2 B 195D225X_010B2T 0.5 6 4.7 D 195D475X_010D2T 0.5 6 6.8 E 195D685X_010E2T 0.7 6 15 F 195D156X_010F2T 1.5 6 47 H 195D476X_010H2E 4.7 6 15 / 16 WVDC AT + 85 °C, SURGE = 20 V...10 WVDC AT + 125 °C, SURGE = 12 V 0.47 A 195D474X_015A2T 0.5 0.68 A 195D684X_015A2T 0.5 6 6 1.0 B 195D105X_015B2T 0.5 6 1.5 B 195D155X_015B2T 0.5 6 3.3 D 195D335X_015D2T 0.5 6 4.7 E 195D475X_015E2T 0.7 6 6 10 F 195D106X_015F2T 1.5 22 G 195D226X_015G2T 3.3 6 33 H 195D336X_015H2E 5.0 6 20 WVDC AT + 85 °C, SURGE = 26 V . . . 13 WVDC AT + 125 °C, SURGE = 16 V 0.47 A 195D474X_020A2T 0.5 6 1.0 B 195D105X_020B2T 0.5 6 2.2 D 195D225X_020D2T 0.5 6 3.3 E 195D335X_020E2T 0.7 6 6 6.8 F 195D685X_020F2T 1.4 15 G 195D156X_020G2T 3.0 6 22 H 195D226X_020H2E 4.4 6 25 WVDC AT + 85 °C, SURGE = 32 V . . . 17 WVDC AT + 125 °C, SURGE = 20 V 0.33 A 195D334X_025A2T 0.5 6 0.68 B 195D684X_025B2T 0.5 6 1.5 D 195D155X_025D2T 0.5 6 2.2 E 195D225X_025E2T 0.6 6 4.7 F 195D475X_025F2T 1.2 6 6.8 G 195D685X_025G2T 1.7 6 10 G 195D106X_025G2T 2.5 6 15 H 195D156X_025H2E 3.8 6 For 10 % tolerance, specify “9“: for 20 % tolerance, change to “0“. www.vishay.com 9 For technical questions, contact: [email protected] Document Number: 40001 Revision: 16-May-06 195D Solid Tantalum Chip Capacitors TANTAMOUNT® Conformal Coated Vishay Sprague STANDARD RATINGS CAPACITANCE (µF) CASE CODE PART NUMBER Max. DCL at + 25 °C (µA) Max. DF at + 25 °C 120 Hz (%) 35 WVDC AT + 85 °C, SURGE = 46 / 52 V. . . 23 / 25 WVDC AT + 125 °C, SURGE = 28 / 30 V 0.10 A 195D104X_035A2T 0.5 6 0.15 A 195D154X_035A2T 0.5 6 0.22 A 195D224X_035A2T 0.5 6 0.33 B 195D334X_035B2T 0.5 6 0.47 B 195D474X_035B2T 0.5 6 0.68 D 195D684X_035D2T 0.5 6 1.0 D 195D105X_035D2T 0.5 6 1.5 E 195D155X_035E2T 0.5 6 2.2 F 195D225X_035F2T 0.8 6 3.3 F 195D335X_035F2T 1.2 6 4.7 G 195D475X_035G2T 1.6 6 H 195D685X_035H2E 2.4 6 6.8 50 WVDC AT + 85 °C, SURGE = 65 V . . . 33 WVDC AT + 125 °C, SURGE = 38 V 0.10 A 195D104X_050A2T 0.5 6 0.15 A 195D154X_050A2T 0.5 6 0.22 B 195D224X_050B2T 0.5 6 0.33 B 195D334X_050B2T 0.5 6 0.47 D 195D474X_050D2T 0.5 6 0.68 D 195D684X_050D2T 0.5 6 1.0 E 195D105X_050E2T 0.5 6 1.5 F 195D155X_050F2T 0.8 6 2.2 F 195D225X_050F2T 1.1 6 3.3 G 195D335X_050G2T 1.7 6 4.7 H 195D475X_050H2E 2.4 6 For 10 % tolerance, specify “9“: for 20 % tolerance, change to “0“. Document Number: 40001 Revision: 16-May-06 For technical questions, contact: [email protected] www.vishay.com 10 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1