1F1G THRU 1F7G FAST RECOVERY GLASS PASSIVATED JUNCTION RECTIFIER VOLTAGE: 50 TO 1000V CURRENT: 1.0A FEATURE R-1 Molded case feature for auto insertion High current capability Low leakage current High surge capability High temperature soldering guaranteed 250°C /10sec/0.375" lead length at 5 lbs tension Glass Passivated chip MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL 1F 1G 50 35 50 1F 2G 100 70 100 1F 3G 200 140 200 1F 4G 400 280 400 1F 5G 600 420 600 1F 6G 800 560 800 1F 7G 1000 700 1000 units Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Vrrm Vrms Vdc Maximum Average Forward Rectified Current 3/8" lead length at Ta =50°C Peak Forward Surge Current 8.3ms single Half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at rated forward current Maximum full load reverse current full cycle at TL =75°C Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =100°C Typical Junction Capacitance (Note 1) If(av) 1.0 A Ifsm 30.0 A Vf 1.3 V Ir(av) 30.0 µA 5.0 100.0 15.0 µA µA Maximum Reverse Recovery Time (Note 2) Operating Temperature (Note 3) Storage and Operation Junction Temperature Ir Cj Trr R(ja) Tstg, Tj 150 250 50.0 -55 to +150 500 V V V pF nS °C /W °C Note: 1. Measured at 1.0 MHz and applied voltage of 4.0Vdc 2. Test Condition If =0.5A, Ir =1.0A, Irr =0.25A 3. Thermal Resistance from Junction to Ambient at 0.375" lead length, P.C. Board Mounted Rev.4 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES 1F1G THRU 1F7G 1 1 Rev.4 www.gulfsemi.com