HCC4071B/72B/75B HCF4071B/72B/75B OR GATE 4071B - QUAD 2–INPUT OR GATE 4072B - QUAD 4–INPUT OR GATE 4075B - TRIPLE 3–INPUT OR GATE . . .. .. MEDIUM-SPEED OPERATION tPLH, tPHL = 60ns. (typ.) AT VDD = 10V QUIESCENT CURRENT SPECIFIED TO 20V FOR HCC DEVICE 5V, 10V AND 15V PARAMETRIC RATINGS INPUT CURRENT OF 100nA AT 18V AND 25°C FOR HCC DEVICE 100% TESTED FOR QUIESCENT CURRENT MEETS ALL REQUIREMENTS OF JEDEC TENTATIVE STANDARD No. 13A, ”STANDARD SPECIFICATIONS FOR DESCRIPTION OF ”B” SERIES CMOS DEVICES” EY (Plastic Package) M1 (Micro Package) F (Ceramic Frit Seal Package) C1 (Plastic Chip Carrier) ORDER CODES : HCC40XXBF HCF40XXBM1 HCF40XXBEY HCF40XXBC1 DESCRIPTION The HCC4071B/4072B and 4075B (extended temperature range) and HCF4071B/4072B and 4075B (intermediate temperature range) are monolithic integrated circuits, available in 14-lead dual in-line plastic or ceramic package and plastic micropackage. The HCC/HCF4071B, 4072B and 4075B OR gates provide the system designer with direct implementation of the positive-logic OR function and supplement the existing family of COS/MOS gates. PIN CONNECTIONS 4071B June 1989 4072B 4075B 1/11 HCC/HFC4071B/72B/75B ABSOLUTE MAXIMUM RATINGS Symbol V DD* Parameter Supply Voltage : HCC Types HC F Types Value Unit – 0.5 to + 20 – 0.5 to + 18 V V – 0.5 to V DD + 0.5 V Vi Input Voltage II DC Input Current (any one input) ± 10 mA Total Power Dissipation (per package) Dissipation per Output Transistor for Top = Full Package-temperature Range 200 mW 100 mW Pt ot Top Operating Temperature : HCC Types H CF Types – 55 to + 125 – 40 to + 85 °C °C Tstg Storage Temperature – 65 to + 150 °C Stresses above those listed under ”Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for external periods may affect device reliability. * All voltage values are referred to VSS pin voltage. RECOMMENDED OPERATING CONDITIONS Symbol V DD VI Top Parameter Supply Voltage : HCC Types HC F Types Input Voltage Operating Temperature : HCC Types H CF Types Typical Voltage and Current Transfer Characteristics. 2/11 Value Unit 3 to 18 3 to 15 V V 0 to V DD V – 55 to + 125 – 40 to + 85 °C °C Typical Output Low (sink) Current Characterisitcs. HCC/HCF4071B/72B/75B Minimum Output Low (sink) Current Characteristics. Typical Output High (source) Current Characteristics. Minimum Output High (source) Current Characterisitcs. Typical Propagation Delay Time vs. Load Capacitance. Typical Transition Time vs. Load Capacitance. Typical Dynamic Power Dissipation vs. Frequency. 3/11 HCC/HFC4071B/72B/75B SCHEMATIC DIAGRAMS 4071B – 1 of 4 identical OR gates 4072B – 1 of 2 identical OR gates 4075B – 1 of 3 identical OR gates 4/11 HCC/HCF4071B/72B/75B STATIC ELECTRICAL CHARACTERISTICS (over recommended operating conditions) Test Conditions Symbol IL V OH V OL Parameter Quiescent Current VI (V) VO (V) V IL I OH 0/ 5 5 0.25 0.01 0.25 7.5 HCC Types 0/15 10 0.5 0.01 0.5 15 15 1 0.01 1 30 0/20 20 5 0.02 5 150 0/ 5 HCF 0/10 Types 0/15 5 1 0.01 1 7.5 10 2 0.01 2 15 15 4 0.01 4 30 Output High Voltage Output Low Voltage 0/ 5 <1 5 4.95 4.95 4.95 0/10 <1 10 9.95 9.95 9.95 0/15 <1 15 14.95 14.95 14.95 5/0 <1 5 0.05 0.05 0.05 10/0 <1 10 0.05 0.05 0.05 I OL I IH , I IL CI * * Input High Voltage Input Low Voltage Output Drive Current Output Sink Current Input Leakage Current |I O | V D D T L o w* 25 °C T Hi g h * (µA) (V) Min. Max. Min. Typ. Max. Min. Max. 0/10 15/0 V IH Value <1 15 0.5/4.5 <1 5 1/9 0.05 3.5 0.05 3.5 <1 10 7 7 7 15 11 11 11 4.5/0.5 <1 5 1.5 1.5 1.5 9/1 <1 10 3 3 3 13.5/1.5 < 1 15 4 4 4 2.5 5 – 2 – 1.6 – 3.2 – 1.15 HCC Types 0/10 4.6 5 – 0.64 – 0.51 – 1 – 0.36 9.5 10 – 1.6 – 1.3 – 2.6 – 0.9 0/15 13.5 15 – 4.2 – 3.4 – 6.8 – 2.4 0/ 5 2.5 5 – 1.53 – 1.36 – 3.2 – 1.1 0/ 5 HCF Types 0/10 4.6 5 – 0.52 – 0.44 – 1 – 0.36 9.5 10 – 1.3 – 1.1 – 2.6 – 0.9 0/15 13.5 15 – 3.6 – 3.0 – 6.8 – 2.4 0/ 5 0.4 5 0.64 0.51 1 0.36 HCC 0/10 Types 0/15 0.5 10 1.6 1.3 2.6 0.9 1.5 15 4.2 3.4 6.8 2.4 0/ 5 0.4 5 0.52 0.44 1 0.36 HCF 0/10 Types 0/15 0.5 10 1.3 1.1 2.6 0.9 1.5 15 3.6 3.0 6.8 2.4 V mA 18 ± 0.1 ±10 – 5 ± 0.1 ± 1 15 ± 0.3 ±10 ± 1 5 –5 ± 0.3 7.5 V mA Any Input Any Input V 0.05 0/ 5 Input Capacitance V 1.5/13.5 < 1 HCF Types 0/15 µA 3.5 0/ 5 HCC 0/18 Types Unit µA pF T Low= – 55°C for HCC device : – 40°C for HCF device. T High = + 125°C for HCC device : + 85°C for HCF device. The Noise Margin for both ”1” and ”0” level is : 1V min. with VDD = 5V, 2V min. with VDD = 10V, 2.5 V min. with VDD = 15V. 5/11 HCC/HFC4071B/72B/75B DYNAMIC ELECTRICAL CHARACTERISTICS (T amb = 25°C, C L = 50pF, R L = 200kΩ, typical temperature coefficient for all V DD = 0.3%/°C values , all input rise and fall time = 20ns) Symbol t P HL tP LH Parameter Test Conditions Value V D D (V) Min. Propagation Delay Time Propagation Delay Time t THL , t T L H Transition Time TEST CIRCUITS Quiescent Device Current. Input Leakage Current. 6/11 Input Voltage. Typ. Max. 5 125 250 10 60 120 15 45 90 5 175 350 70 50 140 15 50 140 5 100 200 10 50 100 15 40 80 Unit ns ns ns HCC/HCF4071B/72B/75B Plastic DIP14 MECHANICAL DATA mm DIM. MIN. a1 0.51 B 1.39 TYP. inch MAX. MIN. TYP. MAX. 0.020 1.65 0.055 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 15.24 0.600 F 7.1 0.280 I 5.1 0.201 L Z 3.3 1.27 0.130 2.54 0.050 0.100 P001A 7/11 HCC/HFC4071B/72B/75B Ceramic DIP14/1 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 20 0.787 B 7.0 0.276 D E 3.3 0.130 0.38 e3 0.015 15.24 0.600 F 2.29 2.79 0.090 0.110 G 0.4 0.55 0.016 0.022 H 1.17 1.52 0.046 0.060 L 0.22 0.31 0.009 0.012 M 1.52 2.54 0.060 0.100 N P Q 10.3 7.8 8.05 5.08 0.406 0.307 0.317 0.200 P053C 8/11 HCC/HCF4071B/72B/75B SO14 MECHANICAL DATA mm DIM. MIN. TYP. A a1 inch MAX. MIN. TYP. 1.75 0.1 0.068 0.2 a2 MAX. 0.003 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45° (typ.) D 8.55 E 5.8 8.75 0.336 6.2 0.228 0.344 0.244 e 1.27 0.050 e3 7.62 0.300 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.68 0.026 8° (max.) P013G 9/11 HCC/HFC4071B/72B/75B PLCC20 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 9.78 10.03 0.385 0.395 B 8.89 9.04 0.350 0.356 D 4.2 4.57 0.165 0.180 d1 2.54 0.100 d2 0.56 0.022 E 7.37 8.38 0.290 0.330 e 1.27 0.050 e3 5.08 0.200 F 0.38 0.015 G 0.101 0.004 M 1.27 0.050 M1 1.14 0.045 P027A 10/11 HCC/HCF4071B/72B/75B Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. 1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A 11/11