Product Data Sheet 1 WATT REGULATED DC/DC CONVERTER HL01R FEATURES ● SHORT CIRCUIT PROTECTED ● BUILT IN STANDOFFS ● INDUSTRY STANDARD PINOUT ● LOW COST ● NON-CONDUCTIVE CASE ● INTERNAL INPUT AND OUTPUT FILTERING DESCRIPTION The HL01R Series uses advanced circuit design and packaging technology to realize superior reliability and performance. A 125kHz push-pull oscillator is used in the input stage. Beat-frequency oscillator problems are reduced when using the HL01R Series with high frequency isolation amplifiers. Reduced parts count and all surface mount construction add to the reliability of the HL01R Series. The use of surface mount devices and magnetics eliminate hand soldering operations. This "hands-free" construction increases quality and reliability while keeping cost low. ABSOLUTE MAXIMUM RATINGS ORDERING INFORMATION Internal Power Dissipation.......................................................1.2W Short Circuit Duration....................................................Continuous Lead Temperature (soldering, 10 seconds max)................+300°C * *Note: Refer to Reflow Profile for SMD Models. HL01R xxyzz Y/Z /H Device Family HL Indicates DC/DC Converter Model Number Where: xx = Input Voltage y = Number or Outputs (Single "S", Dual "D") zz = Output Voltage Package Option Screening Option DIP Package only TYPICAL PERFORMANCE CURVES Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. EFFICIENCY vs LOAD 60% Efficiency (%) 50% 40% 30% 20% 10% 0% 0% 25% 50% Load (mA) 75% 100% Internet: http://www.cdpowerelectronics.com Power Electronics Division, United States 3400 E Britannia Drive, Tucson, Arizona 85706 Phone: 800.547.2537 Fax: 520.770.9369 HL01RrevD,10/97 This Material Copyrighted by Its Respective Manufacturer Power Electronics Division, Europe C&D Technologies (Power Electronics) Ltd. 132 Shannon Industrial Estate, Shannon, Co. Clare, Ireland Tel: +353.61.474.133 Fax:+353.61.474.141 Page 0 ELECTRICAL SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. NOMINAL INPUT VOLTAGE RATED OUTPUT VOLTAGE RATED OUTPUT CURRENT (VDC) (VDC) (mA) (mA) HL01R05S05 HL01R05S12 HL01R05S15 5 5 5 5 12 15 200 83 67 50 50 50 400 400 400 58 52 52 HL01R12S05 HL01R12S12 HL01R12S15 12 12 12 5 12 15 200 83 67 40 40 40 160 160 160 58 52 52 HL01R15S05 HL01R15S12 HL01R15S15 15 15 15 5 12 15 200 83 67 30 30 30 130 130 130 58 52 52 HL01R24S05 HL01R24S12 HL01R24S15 24 24 24 5 12 15 200 83 67 20 20 20 80 80 80 58 52 52 HL01R05D05 HL01R05D12 HL01R05D15 5 5 5 ±5 ±12 ±15 ±100 ±41 ±33 50 50 50 425 400 400 45 53 53 HL01R12D05 HL01R12D12 HL01R12D15 12 12 12 ±5 ±12 ±15 ±100 ±41 ±33 40 40 40 185 160 160 45 53 53 HL01R15D05 HL01R15D12 HL01R15D15 15 15 15 ±5 ±12 ±15 ±100 ±41 ±33 30 30 30 145 130 130 45 53 53 HL01R24D05 HL01R24D12 HL01R24D15 24 24 24 ±5 ±12 ±15 ±100 ±41 ±33 20 20 20 90 80 80 45 53 53 TYP MAX UNITS 5 12 15 24 30 5.25 12.6 15.75 25.2 100 VDC VDC VDC VDC mAp-p VISO= 240VAC, 60Hz 1 25 2 10 VDC Vpk GΩ pF µArms BW = DC to 10MHz BW =10Hz to 2MHz High Line to Low Line Rated Load to No Load 1 ±3 ±0.01 30 1 ±0.1 ±0.3 ±5 ±0.02 100 10 ±0.3 ±0.5 W % %/°C mVp-p mVrms % % MODEL INPUT CURRENT MIN LOAD RATED LOAD EFFICIENCY (mA)(%) Note: Other input to output voltages may be available. Please contact factory. COMMON SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. PARAMETER CONDITIONS INPUT Voltage Range MIN 4.75 11.4 14.25 22.8 Reflected Ripple Current ISOLATION Rated Voltage Test Voltage Resistance Capacitance Leakage Current OUTPUT Rated Power Voltage Setpoint Accuracy Temperature Coefficent Ripple & Noise Line Regulation Load Regulation GENERAL Switching Frequency Package Weight MTTF per MIL-HDBK-217, Rev. F Ground Benign 60 Hz, 10 Seconds 500 500 125 10 kHz g 675 kHr Circuit Stress Method TEMPERATURE Specification Operation Storage Page 2 This Material Copyrighted by Its Respective Manufacturer -25 -40 -40 +70 +85 +110 °C °C °C HL01RrevD,10/97 MECHANICAL Package/Pinout "Y" and "Z" 1.285±0.010" (32.64±0.25) 1.285±0.010" (32.64±0.25) 2423 22 0.525±0.010" (13.34±0.25) 2423 22 1514 13 0.525±0.010" (13.34±0.25) HL01RxxyzzY 1 2 3 SIDE VIEWS 0.695±0.015" (17.65±0.38) 10 11 12 0.375±0.005" (9.52±0.13) 0.015±0.005" (0.38±0.13) 0.020±0.002" (0.51±0.05) 0.100±0.010" (2.54±0.25) HL01RxxyzzZ 1 2 3 10 11 12 0.375±0.005" (9.52±0.13) 0.015±0.005" (0.38±0.13) 1514 13 TOP VIEWS 0.020±0.002" (0.51±0.05) 0.100±0.010" (2.54±0.25) END VIEWS 0.125+0.030" -0.000" (3.18+0.76) ( -0.00) 0°-15° 0.600" (15.24) 0.014±0.002" (0.36±0.05) DIP PACKAGE .015±.010" (.38±.25) SMD PACKAGE NU = Do Not Use. NC = No Internal Connection. PIN CONNECTIONS Duplicate pin functions are internally connected. PIN# All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) Typically Marked with: specific model ordered, date code, job code and Logo. RECOMMENDED LAND PATTERN SINGLES DUALS 1 2 3 +VIN NU NU +VIN -VOUT Common 10 11 12 -VOUT +VOUT -VIN Common +VOUT -VIN 13 14 15 -VIN +VOUT -VOUT -VIN +VOUT Common 22 23 24 NU NU +VIN Common -VOUT +VIN RECOMMENDED REFLOW PROFILE 30 sec MAX (>220°C) 0.100" (2.54) 250 235 °C MAX 2423 22 220 1514 13 200 0.040" (1.02) 1 2 3 10 11 12 1.150" (29.21) TEMPERATURE (°C) 0.080" (2.03) 0.730" (18.54) 190 150 100 90 sec MAX (>190°C) 50 TIME (seconds) HL01RrevD,10/97 This Material Copyrighted by Its Respective Manufacturer Page 2 Page 4 This Material Copyrighted by Its Respective Manufacturer HL01RrevD,10/97