HMC829LP6GE v01.0911 FRACTIONAL-N PLL WITH INTEGRATED VCO 45 - 1050, 1400 - 2100, 2800 - 4200 MHz PLLs with integrated vco - SMT Features 1 • RF Bandwidth: 45 - 1050, 1400 - 2100, 2800 - 4200 MHz • <180 fs RMS Jitter • Maximum Phase Detector Rate 100 MHz • Exact Frequency Mode • Ultra Low Phase Noise -110 dBc/Hz in Band Typ. • 40 Lead 6x6 mm SMT Package: 36 mm2 • 24-bit Step Size, Resolution 3 Hz typ • Built in Digital Self Test • Figure of Merit (FOM) -227 dBc/Hz Typical Applications • Cellular/4G, WiMax Infrastructure • Phased Array Applications • Repeaters and Femtocells • DDS Replacement • Communications Test Equipment • Very High Data Rate Radios • CATV Equipment • Tunable Reference Source for Spurious- Free Performance Functional Diagram For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC829LP6GE v01.0911 FRACTIONAL-N PLL WITH INTEGRATED VCO 45 - 1050, 1400 - 2100, 2800 - 4200 MHz The is a low noise, wide band, Fractional-N Phase-Locked-Loop (PLL) that features an integrated Voltage Controlled Oscillator (VCO) with a fundamental frequency of 2800 MHz - 4200 MHz, and an integrated VCO Output Divider (divide by 1/2/4/6.../60/62), that together allow the to generate frequencies from 45 MHz to 1050 MHz, from 1400 MHz to 2100 MHz, and from 2800 MHz to 4200 MHz. The integrated Phase Detector (PD) and delta-sigma modulator, capable of operating at up to 100 MHz, permit wider loop-bandwidths with excellent spectral performance. The features industry leading phase noise and spurious performance, across all frequencies, that enable it to minimize blocker effects, and improve receiver sensitivity and transmitter spectral purity. The superior noise floor (< -170 dBc/ Hz) makes the an ideal source for a variety of applications - such as; LO for RF mixers, a clock source for highfrequency data-converters, or a tunable reference source for ultra-low spurious applications. Additional features of the include RF output power control from 0 to 6 dB (~2 dB steps), output Mute function, and a delta-sigma modulator Exact Frequency Mode which enables users to generate output frequencies with 0 Hz frequency error. For theory of operation and register map refer to the “PLLs with Integrated VCOs - RF VCOs Operating Guide”. To view the Operating Guide, please visit www.hittite.com and choose from the “Search by Part Number” pull down menu. Electrical Specifications VPPCP, VDDLS, VCC1, VCC2 = 5V; RVDD, AVDD, DVDD3V, VCCPD, VCCHF, VCCPS = 3.3V Min and Max Specified across Temp -40 °C to 85 °C Parameter Condition Min. Typ. Max. Units RF Output Characteristics Output Frequency Band 1 45 1050 MHz Band 2 1400 2100 MHz 2800 4200 MHz VCO Frequency at PLL Input Band 3 2800 4200 MHz RF Output Frequency at f VCO 2800 4200 MHz 4.3 dBm 7.5 dB PLLs with integrated vco - SMT General Description Output Power RF Output Power at f VCO = 4000 MHz Across All Frequencies see Figure 9 Output Power Control Single-ended Power Broadband Matched Internally [1] 1 ~2 dB Steps 6 3 Harmonics fo Mode at 4000 MHz 2nd / 3rd / 4th -25/-29/-38 fo/2 Mode at 4000 MHz/2 = 2 GHz 2nd / 3rd / 4th -25/-24/-35 dBc dBc fo/30 Mode at 2800 MHz/28 = 100 MHz 2nd / 3rd / 4th -20/-10/-26 dBc fo/62 Mode at 2800 MHz/62 = 45 MHz 2nd / 3rd / 4th -14/-8/-21 dBc VCO Output Divider VCO RF Divider Range 1,2,4,6,8,...,62 1 62 Max = 219 - 1 16 524,287 Fractional nominal divide ratio varies (-3 / +4) dynamically max 20 524,283 PLL RF Divider Characteristics 19-Bit N-Divider Range (Integer) 19-Bit N-Divider Range (Fractional) [1] Measured single-ended. Additional 3 dB possible with differential outputs. [2] Measured with 100 Ω external termination. See Hittite PLL w/ Integraged VCOs Operating Guide Reference Input Stage section for more details. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 2 HMC829LP6GE v01.0911 FRACTIONAL-N PLL WITH INTEGRATED VCO 45 - 1050, 1400 - 2100, 2800 - 4200 MHz Electrical Specifications (Continued) PLLs with integrated vco - SMT Parameter Condition Min. Typ. Max. Units 350 MHz 3.3 Vp-p 5 pF REF Input Characteristics Max Ref Input Frequency Ref Input Voltage AC Coupled [2] 1 2 Ref Input Capacitance 14-Bit R-Divider Range 1 16,383 Phase Detector (PD) [3] PD Frequency Fractional Mode B [4] DC 100 MHz PD Frequency Fractional Mode A (and Register 6 [17:16] = 11) DC 80 MHz PD Frequency Integer Mode DC 125 MHz 2.54 mA Charge Pump Output Current 0.02 Charge Pump Gain Step Size PD/Charge Pump SSB Phase Noise 20 µA 50 MHz Ref, Input Referred 1 kHz -143 dBc/Hz 10 kHz Add 1 dB for Fractional -150 dBc/Hz 100 kHz Add 3 dB for Fractional -153 dBc/Hz Logic Inputs Vsw 40 50 60 % DVDD Logic Outputs VOH Output High Voltage DVDD V VOL Output Low Voltage 0 V Output Impedance 100 Maximum Load Current 200 Ω 1.5 mA Power Supply Voltages 3.3 V Supplies 5 V Supplies AVDD, VCCHF, VCCPS, VCCPD, RVDD,DVDD 3.0 3.3 3.5 V VPPCP, VDDLS, VCC1, VCC2 4.8 5 5.2 V Power Supply Currents +5V Analog Charge Pump +5V VCO Core and VCO Buffer +5V VCO Divider and RF/PLL Buffer VPPCP, VDDLS 8 mA fo/1 Mode VCC2 105 mA fo/N Mode VCC2 80 mA Single-Ended Output Mode fo/1 Mode VCC1 25 mA Differential Output Mode fo/1 Mode VCC1 40 mA Single-Ended Output Mode fo/N Mode VCC1 80 100 mA Differential Output Mode fo/N Mode VCC1 95 115 mA [3] Slew rate of greater or equal to 0.5 ns/V is recommended, see PLL with Integrated RF VCOs Operating Guide for more details. Frequency is guaranteed across process voltage and temperature from -40 °C to 85 °C. [4] This maximum phase detector frequency can only be achieved if the minimum N value is respected. eg. In the case of fractional feedback mode, the maximum PFD rate = fvco/20 or 100 MHz, whichever is less. 3 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC829LP6GE v01.0911 FRACTIONAL-N PLL WITH INTEGRATED VCO 45 - 1050, 1400 - 2100, 2800 - 4200 MHz Electrical Specifications (Continued) +3.3V Power Down - Crystal Off Power Down - Crystal On, 100 MHz Condition Min. Typ. Max. Units AVDD, VCCHF, VCCPS, VCCPD, RVDD, DVDD3V 52 mA Reg 01h=0, Crystal Not Clocked 10 µA Reg01h =0, Crystal Clocked 100 MHz 10 30 mA Power on Reset Typical Reset Voltage on DVDD 700 mV 250 µs 10 kHz Offset -78 dBc/Hz 100 kHz Offset -108 dBc/Hz 1 MHz Offset -134.5 dBc/Hz 10 MHz Offset -156 dBc/Hz 100 MHz Offset -171 dBc/Hz 10 kHz Offset -83 dBc/Hz 100 kHz Offset -113 dBc/Hz 1 MHz Offset -139.5 dBc/Hz 10 MHz Offset -165.5 dBc/Hz 100 MHz Offset -167 dBc/Hz 10 kHz Offset -111 dBc/Hz 100 kHz Offset -141 dBc/Hz 1 MHz Offset -163.5 dBc/Hz 10 MHz Offset -170 dBc/Hz 100 MHz Offset -173 dBc/Hz Min DVDD Voltage for No Reset 1.5 Power on Reset Delay V VCO Open Loop Phase Noise at fo @ 4 GHz VCO Open Loop Phase Noise at fo @ 4 GHz/2 = 2 GHz VCO Open Loop Phase Noise at fo @ 2.8 GHz/28 = 100 MHz PLLs with integrated vco - SMT Parameter Figure of Merit Floor Integer Mode Normalized to 1 Hz -230 dBc/Hz Floor Fractional Mode Normalized to 1 Hz -227 dBc/Hz Flicker (Both Modes) Normalized to 1 Hz -268 dBc/Hz VCO Tuning Sensitivity at 4053 MHz Measured at 2.5 V 15 MHz/V VCO Tuning Sensitivity at 3777 MHz Measured at 2.5 V 13 MHz/V VCO Tuning Sensitivity at 3411 MHz Measured at 2.5 V 12 MHz/V VCO Tuning Sensitivity at 2943 MHz Measured at 2.5 V 11.5 MHz/V VCO Supply Pushing Measured at 2.5 V 2 MHz/V VCO Characteristics For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 4 HMC829LP6GE v01.0911 FRACTIONAL-N PLL WITH INTEGRATED VCO 45 - 1050, 1400 - 2100, 2800 - 4200 MHz Figure 1. Typical Closed Loop Integer Phase Noise[“Loop Filter Configuration Table”] Figure 2. Typical Closed Loop Fractional Phase Noise [“Loop Filter Configuration Table”] -60 fout 900 MHz, Loop BW 130 kHz, rms jitter 168.4 fs fout 1800 MHz, Loop BW 130 kHz, rms jitter 141 fs fout 3600 MHz, Loop BW 130 kHz, rms jitter 136 fs fout 900 MHz, Loop BW 250 kHz, rms jitter 91 fs fout 1800 MHz, Loop BW 250 kHz, rms jitter 88 fs fout 3600 MHz, Loop BW 250 kHz, rms jitter 86 fs fout 901.25 MHz, Loop BW 130 kHz, rms jitter 182 fs fout 1802.5 MHz, Loop BW 130 kHz, rms jitter 152 fs fout 3605 MHz, Loop BW 130 kHz, rms jitter 145 fs fout 900.25 MHz, Loop BW 250 kHz, rms jitter 114 fs fout 1802.5 MHz, Loop BW 250 kHz, rms jitter 112 fs fout 3605 MHz, Loop BW 250 kHz, rms jitter 110 fs -80 PHASE NOISE (dBc/Hz) PHASE NOISE (dBc/Hz) -80 -100 -120 -140 -100 -120 -140 -160 -160 -180 -180 10 3 10 4 5 10 10 OFFSET (Hz) 6 10 7 10 8 10 3 10 4 10 6 10 7 10 8 -100 -40 PHASE NOISE (dBc/Hz) -80 100 kHz Offset -110 4053 MHz 3777 MHz 3411 MHz 2943 MHz -60 -100 -120 -140 -160 27 C -40 C 85 C -120 1 MHz Offset -130 -140 -150 -160 100 MHz Offset -170 -180 3 10 -180 10 4 10 5 10 6 10 7 10 8 10 100 1000 10000 FREQUENCY (MHz) Figure 6. Typical Tuning Voltage After Calibration Figure 5. Typical VCO Sensitivity 5 TUNE VOLTAGE AFTER CALIBRATION (V) 70 4053 MHz at 2.5V, Tuning Cap 7 3777 MHz at 2.5V, Tuning Cap 7 3411 MHz at 2.5V, Tuning Cap 15 2943 MHz at 2.5V, Tuning Cap 15 60 50 kVCO (MHz/V) 5 Figure 4. Free Running VCO Phase Noise vs. Temperature OFFSET (Hz) 40 30 20 10 4 fmin fmax 3 2 1 0 0 0 1 2 3 TUNING VOLTAGE (V) 5 10 OFFSET (Hz) Figure 3. Free Running Phase Noise PHASE NOISE (dBc/Hz) PLLs with integrated vco - SMT -60 4 5 2700 2900 3100 3300 3500 3700 3900 VCO FREQUENCY(MHz) 4100 4300 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC829LP6GE v01.0911 FRACTIONAL-N PLL WITH INTEGRATED VCO 45 - 1050, 1400 - 2100, 2800 - 4200 MHz Figure 7. Integrated RMS Jitter[1] Figure 8. Figure of Merit 180 NORMALIZED PHASE NOISE (dBc/Hz) 27C -40C 85C RMS JITTER (fs) 160 140 120 100 80 60 100 1000 Typ FOM vs Offset -220 FOM Floor FOM 1/f Noise -230 -240 2 10 40 10 -210 10000 10 3 OUTPUT FREQUENCY (MHz) 4 10 5 10 6 Figure 10. Typical Single-Ended Output Power vs. Temperature, Maximum Gain Figure 9. Typical Single-Ended Output Power 10 10 5 5 OUTPUT POWER (dBm) OUTPUT POWER (dBm) 10 FREQUENCY OFFSET (Hz) 0 -5 0 -5 27 C -40 C 85 C Gain Setting 11 Gain Setting 10 Gain Setting 01 Gain Setting 00 -10 -10 0 1000 2000 3000 4000 5000 0 1000 2000 OFFSET (MHz) 3000 4000 PLLs with integrated vco - SMT -200 200 5000 OFFSET (MHz) Figure 12. Reference Input Sensitivity, Square Wave, 50 Ω [2] Figure 11. RF Output Return Loss -215 0 50 MHz -220 FLOOR FOM (dBc/Hz) RETURN LOSS (dB) -5 -10 -15 -20 14 MHz sq 25 MHz sq 50 MHz sq 100 MHz sq 25 MHz -225 14 MHz -230 -25 100 MHz -30 10 7 10 8 10 9 OUTPUT FREQUENCY (Hz) 10 10 -235 -15 -10 -5 0 5 10 REFERENCE POWER (dBm) [1] RMS Jitter data is measured in fractional mode with 250 kHz Loop bandwidth using 100 MHz reference, PD 50 MHz. Integration bandwidth from 1 kHz to 100 MHz. [2] Measured from a 50 Ω source with a 100 Ω external resistor termination. See PLL with Integrated RF VCOs Operating Guide Reference Input Stage section for more details. Full FOM performance up to maximum 3.3 Vpp input voltage. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 6 HMC829LP6GE v01.0911 FRACTIONAL-N PLL WITH INTEGRATED VCO 45 - 1050, 1400 - 2100, 2800 - 4200 MHz Figure 13. Reference Input Sensitivity Sinusoid Wave, 50 Ω[3] Figure 14. Integer Boundary Spur at 3600.2 MHz[4] 0 -20 -40 -210 PHASE NOISE (dBc/Hz) FLOOR FOM (dBc/Hz) -205 25 MHz -215 14 MHz -220 50 MHz -225 -60 -80 -100 -120 -140 -230 -160 100 MHz -235 -20 -15 -10 -5 0 -180 5 10 3 10 4 REFERENCE POWER (dBm) -20 -40 -40 PHASE NOISE (dBc/Hz) 0 -20 -60 -80 -100 -120 -140 6 10 7 10 8 -60 -80 -100 -120 -160 -180 -180 3 10 4 10 5 10 6 10 7 10 8 10 3 10 4 OFFSET (Hz) 10 5 10 6 10 7 10 8 OFFSET (Hz) Figure 17. Fractional-N, Exact Frequency Mode ON, Performance at 3591 MHz[7] Figure 18. Fractional-N, Exact Frequency Mode OFF, Performance at 3591 MHz[8] 0 0 -20 -20 -40 -40 PHASE NOISE (dBc/Hz) PHASE NOISE (dBc/Hz) 10 -140 -160 -60 -80 -100 -120 -60 -80 -100 -120 -140 -140 -160 -160 -180 -180 10 5 Figure 16. Fractional-N, Exact Frequency Mode ON, Performance at 1813.5 MHz[6] 0 10 10 OFFSET (Hz) Figure 15. Integer-N, Exact Frequency Mode ON, Performance at 900 MHz[5] PHASE NOISE (dBc/Hz) PLLs with integrated vco - SMT -200 3 10 4 10 5 10 OFFSET (Hz) 6 10 7 10 8 10 3 10 4 10 5 10 6 10 7 10 8 OFFSET (Hz) [3] Measured from a 50 Ω source with a 100 Ω external resistor termination. See PLL with Integrated RF VCOs Operating Guide Reference Input Stage section for more details. Full FOM performance up to maximum 3.3 Vpp input voltage. [4] Fractional Mode Mode B, Integer Boundary Spur at 3600.2 MHz, Loop Filter bandwidth 130 kHz, REF in 100 MHz, 50 MHz PD [5] REF in 100 MHz, 50 MHz PD, Output Divider 4 Selected, Loop Filter bandwidth 130 kHz, Channel Spacing 100 kHz [6] Exact Frequency Mode, REF in 100 MHz, 50 MHz PD, Output Divider 2 Selected, Loop Filter bandwidth = 130 kHz, Channel Spacing = 100 kHz [7] Exact Frequency Mode, Channel Spacing 100 kHz, RF out = 3951 MHz, REF in 100 MHz, 50 MHz PD, Output Divider 1 selected, Loop Filter bandwidth 130 kHz, [8] Fractional Mode B, RF out 3591 MHz, REF in 100 MHz, 50 MHz PD, Output Divider 1 selected, Loop Filter bandwidth 130 kHz. 7 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC829LP6GE v01.0911 FRACTIONAL-N PLL WITH INTEGRATED VCO 45 - 1050, 1400 - 2100, 2800 - 4200 MHz -40 -90 -60 -100 -80 -100 -120 -140 -160 -110 -120 -130 -140 -150 -160 -170 -180 10 2 10 3 10 4 10 5 10 6 10 7 10 8 10 2 10 3 10 4 OFFSET (Hz) Figure 21. Worst Spur, Fixed vs. Tunable Reference [10] 5 10 6 10 7 10 8 Figure 22. Low Frequency Performance [11] -50 -120 Carrier Frequency 45.16129 MHz Carrier Frequency = 75 MHz Carrier Frequency = 100 MHz -60 PHASE NOISE (dBc/Hz) -130 WORST SPUR (dBc) 10 OFFSET (Hz) -70 Fixed 50 MHz Reference Tunable Reference -80 -90 -140 -150 -160 -100 -110 3 3.9GHz +10 Hz 4 3.9GHz +10 Hz 5 6 3.9GHz +10 Hz 3.9GHz +10 Hz -170 2 10 7 3.9GHz +10 Hz 10 3 10 4 10 5 10 6 10 7 10 8 PLLs with integrated vco - SMT Figure 20. Worst Spur, Tunable Reference 47.5 MHz, Output Frequency = 3900.1 MHz [9] PHASE NOISE (dBc/Hz) PHASE NOISE (dBc/Hz) Figure 19. Worst Spur, Fixed 50 MHz Reference, Output Freq. = 3900.1 MHz[9] OFFSET (Hz) OUTPUT FREQUENCY Loop Filter Configuration Table Loop Filter BW (kHz) C1 (pF) C2 (nF) C3 (pF) C4 (pF) R2 (kΩ) R3 (kΩ) R4 (kΩ) 130 100 8.2 120 120 1 1.2 1.2 250 150 3.3 18 18 2.2 1 1 Loop Filter Design [9] Capability of to generate low frequencies (as low as 45 MHz), enables the to be used as a tunable reference source into another Hittite PLL. This maximizes spur performance of Hittite PLLs. Please see “Application Information” for more information. [10] The graph is generated by observing, and plotting, the magnitude of only the worst spur (largest magnitude), at any offset, at each output frequency, while using a fixed 50 MHz reference and a tunable reference tuned to 47.5 MHz. See “Application Information” for more details. [11] Phase noise performance of the when used as a tunable reference source. is operating at 4.2 GHz/42, 4.2 GHz/56, and 2.8 GHz/62 for the 100 MHz, 75 MHz, and 45.16129 MHz curves respectively, using a second order loop filter with 230 kHz bandwidth. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 8 HMC829LP6GE v01.0911 FRACTIONAL-N PLL WITH INTEGRATED VCO 45 - 1050, 1400 - 2100, 2800 - 4200 MHz PLLs with integrated vco - SMT Pin Descriptions 9 Pin Number Function Description 1 AVDD DC Power Supply for analog circuitry. 2, 5, 6, 8, 9, 11 - 14, 18 - 22, 24, 26, 34, 37, 38 N/C The pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. Power Supply for charge pump analog section 3 VPPCP 4 CP Charge Pump Output 7 VDDLS Power Supply for the charge pump digital section 10 RVDD Reference Supply 15 XREFP Reference Oscillator Input 16 DVDD3V DC Power Supply for Digital (CMOS) Circuitry 17 CEN Chip Enable. Connect to logic high for normal operation. 23 VTUNE VCO Varactor. Tuning Port Input. 25 VCC2 VCO Analog Supply 2 27 VCC1 VCO Analog Supply 1 28 RF_N RF Negative Output (On in differential and single-ended configuration) 29 RF_P RF Positive Output (Off in single-ended, On in differential configuration) 30 SEN PLL Serial Port Enable (CMOS) Logic Input 31 SDI PLL Serial Port Data (CMOS) Logic Input 32 SCK PLL Serial Port Clock (CMOS) Logic Input 33 LD_SDO Lock Detect, or Serial Data, or General Purpose (CMOS) Logic Output (GPO) 35 VCCHF DC Power Supply for Analog Circuitry 36 VCCPS DC Power Supply for Analog Prescaler 39 VCCPD DC Power Supply for Phase Detector 40 BIAS External bypass decoupling for precision bias circuits. Note: 1.920V ±20mV reference voltage (BIAS) is generated internally and cannot drive an external load. Must be measured with 10GΩ meter such as Agilent 34410A, normal 10MΩ DVM will read erroneously. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC829LP6GE v01.0911 Absolute Maximum Ratings AVDD, RVDD, DVDD3V, VCCPD, VCCHF, VCCPS -0.3V to +3.6V VPPCP, VDDLS, VCC1, VCC2 -0.3V to +5.5V Operating Temperature -40°C to +85°C Storage Temperature -65°C to 150°C Maximum Junction Temperature 125 °C Thermal Resistance (RTH) (junction to ground paddle) 20 °C/W Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Reflow Soldering Peak Temperature 260°C Time at Peak Temperature ESD Sensitivity (HBM) 40 sec Class 1B Outline Drawing PLLs with integrated vco - SMT FRACTIONAL-N PLL WITH INTEGRATED VCO 45 - 1050, 1400 - 2100, 2800 - 4200 MHz NOTES: 1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON IMPREGNATED. 2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY. 3. LEAD AND GROUND PADDLE PLATING: 100% MATTE TIN. 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 6. PAD BURR LENGTH SHALL BE 0.15mm MAX. PAD BURR HEIGHT SHALL BE 0.25mm MAX. 7. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 8. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 9. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN. Package Information Package Body Material Lead Finish MSL Rating Package Marking [1] RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 H829 XXXX Part Number [1] 4-Digit lot number XXXX For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 10 HMC829LP6GE v01.0911 FRACTIONAL-N PLL WITH INTEGRATED VCO 45 - 1050, 1400 - 2100, 2800 - 4200 MHz PLLs with integrated vco - SMT Evaluation PCB The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. Evaluation PCB Schematic To view this Evaluation PCB Schematic please visit www.hittite.com and choose from the “Search by Part Number” pull down menu to view the product splash page. Evaluation Order Information Item 11 Contents Part Number Evaluation PCB Only Evaluation PCB EVAL01- Evaluation Kit Evaluation PCB USB Interface Board 6’ USB A Male to USB B Female Cable CD ROM (Contains User Manual, Evaluation PCB Schematic, Evaluation Software, Hittite PLL Design Software) EKIT01- For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC829LP6GE v01.0911 FRACTIONAL-N PLL WITH INTEGRATED VCO 45 - 1050, 1400 - 2100, 2800 - 4200 MHz Large bandwidth, industry leading phase noise and spurious performance, excellent noise floor (<-170 dBc/Hz), coupled with a high level of integration make the ideal for a variety of applications; as an RF or IF stage LO, a clock source for high-frequency data-converters, or a tunable reference source for extremely low spurious applications (~ -100 dBc/Hz spurs). Figure 23. in a typical transmit chain PLLs with integrated vco - SMT Application Information Figure 24. in a typical receive chain Figure 25. used as a tunable reference for second Using the with a tunable reference as shown in Figure 25, it is possible to drastically improve spurious emissions performance across all frequencies. Example shown in Figure 21 graph shows that it is possible to have spurious emissions ~ -100 dBc/Hz across all frequencies. For more information about spurious emissions, how they are related to the reference frequency, and how to tune the reference frequency for optimal spurious performance please see the “Spurious Performance” section of Hittite PLL w/ Integraged VCOs Operating Guide. Note that at very low output frequencies < 100 MHz, harmonics increase due to small internal AC coupling. Applications which are sensitive to harmonics may require external low pass filtering. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 12