HANBit HMS51232J4A SRAM MODULE 2Mbyte (512K x 32-Bit), 68-Pin JLCC Packaging Part No. HMS51232J4A GENERAL DESCRIPTION The HMS51232J4A is a static random access memory (SRAM) module containing 524,288 words organized in a x32-bit configuration. The module consists of four 512K x 8 SRAMs mounted on a 68-pin, single-sided, FR4-printed circuit board. Four chip enable inputs, (/CE1, /CE2, /CE3 and /CE4) are used to enable the module’s 4 bytes independently. Output enable(/OE) and write enable(/WE) can set the memory input and output. Data is written into the SRAM memory when write enable (/WE) and chip enable (/CE) inputs are both LOW. Reading is accomplished when /WE remains HIGH and /CE and output enable (/OE) are LOW. For reliability, this SRAM module is designed as multiple power and ground pin. All module components may be powered from a single +5V DC power supply and all inputs and outputs are fully TTL-compatible. FEATURES PIN ASSIGNMENT DQ16 A18 A17 /CE4 /CE3 /CE2 /CE1 NC Vcc NC NC /OE /WE A16 A15 A14 DQ15 w Access time : 10, 12 and 15ns w High-density 2MByte design w High-reliability, low-power design w Single +5V ±0.5V power supply w Three state output and TTL-compatible w FR4-PCB design w Low profile 68-Pin JLCC OPTIONS MARKING w Timing 10ns access -10 12ns access -12 15ns access -15 w Packages J 10 9 8 7 6 5 4 3 2 1 68 67 66 65 64 63 62 61 60 11 59 12 58 13 57 14 56 15 55 16 54 17 53 18 52 19 51 20 50 21 49 22 48 23 47 24 46 25 45 26 44 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 DQ31 A6 A5 A4 A3 A2 A1 A0 Vcc A13 A12 A11 A10 A9 A8 A7 DQ0 68-pin JLCC DQ17 DQ18 DQ19 Vss DQ20 DQ21 DQ22 DQ23 Vcc DQ24 DQ25 DQ26 DQ27 Vss DQ28 DQ29 DQ30 68-Pin JLCC TOP VIEW URL: www.hbe.co.kr Rev. 1.0 (May / 2003) 1 HANBit Electronics Co.,Ltd. DQ14 DQ13 DQ12 Vss DQ11 DQ10 DQ9 DQ8 Vcc DQ7 DQ6 DQ5 DQ4 Vss DQ3 DQ2 DQ1 HANBit HMS51232J4A PIN DESCRIPTION DQ0 – DQ31 Data Inputs/Outputs A0 – A18 Address Inputs /WE Write Enable /CE1-4 Chip Selects /OE Output Enable Vcc Power Supply Vss Ground BLOCK DIAGRAM /CE1 /CE2 /CE3 /CE4 /WE /OE A0-18 U1 U2 U3 512Kx8 512Kx8 512Kx8 8 8 8 DQ8-15 DQ0-7 U4 512Kx8 8 DQ16-23 DQ24-31 TRUTH TABLE MODE /OE /CE /WE DQ POWER STANDBY X H X HIGH-Z STANDBY NOT SELECTED H L H HIGH-Z ACTIVE READ L L H Dout ACTIVE WRITE X L L Din ACTIVE URL: www.hbe.co.kr Rev. 1.0 (May / 2003) 2 HANBit Electronics Co.,Ltd. HANBit HMS51232J4A ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL RATING VIN,OUT -0.5V to +7.0V Voltage on Vcc Supply Relative to Vss VCC -0.5V to +7.0V Power Dissipation PD 4W o -55 C to +125oC 0oC to +70oC Voltage on Any Pin Relative to Vss Storage Temperature TSTG Operating Temperature TA w Stresses greater than those listed under " Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operating section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. RECOMMENDED DC OPERATING CONDITIONS ( TA=0 to 70 o C ) PARAMETER * SYMBOL MIN TYP. MAX Supply Voltage VCC 4.5V 5.0V 5.5V Ground VSS 0 0 0 Input High Voltage VIH 2.2 - Vcc+0.5V** Input Low Voltage VIL -0.5* - 0.8V VIL(Min.) = -2.0V (Pulse Width £ 10ns) for I £ 20 mA ** VIH(Max.) = Vcc+2.0V (Pulse Width £ 10ns) for I £ 20 mA DC AND OPERATING CHARACTERISTICS (1)(0oC £ TA £ 70 oC ; Vcc = 5V ± 0.5V ) PARAMETER TEST CONDITIONS Input Leakage Current VIN = Vss to Vcc /CE=VIH or /OE =VIH or /WE=VIL Output Leakage Current VOUT=Vss to VCC SYMBOL MIN MAX UNITS ILI -4 4 mA IL0 -4 4 mA 2.4 - V 0.4 V Output High Voltage IOH = -4.0mA VOH Output Low Voltage IOL = 8.0mA VOL * Vcc=5.0V, Temp=25 oC DC AND OPERATING CHARACTERISTICS (2) DESCRIPTION Power Supply Current: Operating Power Supply Current: Standby TEST CONDITIONS SYMBOL Rev. 1.0 (May / 2003) UNIT -10 -12 -15 lCC 840 820 800 mA lSB 200 200 200 mA lSB1 40 40 40 mA Min. Cycle, 100% Duty /CE=VIL, VIN=VIH or VIL, IOUT=0mA Min. Cycle, /CE=VIH f=0MHZ, /CE³VCC-0.2V, VIN³ VCC-0.2V or VIN£0.2V URL: www.hbe.co.kr MAX 3 HANBit Electronics Co.,Ltd. HANBit HMS51232J4A CAPACITANCE DESCRIPTION TEST CONDITIONS SYMBOL MAX UNIT VI/O=0V CI/O 28 pF CIN 20 pF Input /Output Capacitance Input Capacitance VIN=0V * NOTE : Capacitance is sampled and not 100% tested AC CHARACTERISTICS (0oC £ TA £ 70 oC ; Vcc = 5V ± 0.5V, unless otherwise specified) TEST CONDITIONS PARAMETER VALUE Input Pulse Level 0.V to 3V Input Rise and Fall Time 3ns Input and Output Timing Reference Levels 1.5V Output Load See below Output Load (A) Output Load (B) for tHZ, tLZ, tWHZ, tOW, tOLZ & tOHZ +5V +5V 480W DOUT 255W 480W DOUT 30pF* 255W 5pF* * Including scope and jig capacitance READ CYCLE -10 PARAMETER -12 -15 SYMBOL UNIT MIN MAX MIN MAX MIN MAX Read Cycle Time tRC 10 - 12 - 15 - ns Address Access Time tAA - 10 - 12 - 15 ns Chip Select to Output tCO - 10 - 12 - 15 ns Output Enable to Output tOE - 5 - 6 - 7 ns Output Enable to Low-Z Output tOLZ 0 - 0 - 0 - ns Chip Enable to Low-Z Output tLZ 3 - 3 - 3 - ns Output Disable to High-Z Output tOHZ 0 5 0 6 0 7 ns Chip Disable to High-Z Output tHZ 0 5 0 6 0 7 ns Output Hold from Address Change tOH 3 - 3 - 3 - ns Chip Select to Power Up Time tPU 0 - 0 - 0 - ns Chip Select to Power Down Time tPD - 10 - 12 - 15 ns URL: www.hbe.co.kr Rev. 1.0 (May / 2003) 4 HANBit Electronics Co.,Ltd. HANBit HMS51232J4A WRITE CYCLE PARAMETER -10 SYMBOL -12 -15 MIN MAX MIN MAX MIN MAX UNIT Write Cycle Time tWC 10 - 12 - 15 - ns Chip Select to End of Write tCW 10 - 12 - 15 - ns Address Set-up Time tAS 0 - 0 - 0 - ns Address Valid to End of Write tAW 7 - 8 - 10 - ns Write Pulse Width (/OE=High) tWP 7 - 8 - 10 - ns Write Pulse Width(/OE=Low) tWP1 10 - 12 - 14 - ns Write Recovery Time tWR 0 - 0 - 0 - ns Write to Output High-Z tWZ 0 5 0 6 0 7 ns Data to Write Time Overlap tDW 5 - 6 - 7 - ns Data Hold from Write Time tDH 0 - 0 - 0 - ns End of Write to Output Low-Z tOW 3 - 3 - 3 - ns TIMING DIAGRAMS Please refer to timing diagram chart. FUNCTIONAL DESCRIPTION /CE /WE H X* L H L H L L /OE MODE I/O PIN SUPPLY CURRENT X Not Select High-Z I SB, I SB1 H Output Disable High-Z ICC L Read DOUT ICC X Write DIN ICC Note: X means Don't Care URL: www.hbe.co.kr Rev. 1.0 (May / 2003) 5 HANBit Electronics Co.,Ltd. HANBit HMS51232J4A PACKAGE DIMENSIONS 4.30±0.20mm 0.46±0.20mm 23.44±0.25mm 1.278±0.20mm ORDERING INFORMATION Part Number Density Org. Package HMS51232J4A-10 2MByte 512KX 32bit 68 Pin-JLCC HMS51232J4A-12 2MByte 512KX 32bit HMS51232J4A-15 2MByte 512KX 32bit URL: www.hbe.co.kr Rev. 1.0 (May / 2003) 6 Component Vcc Access time 4EA 5V 10ns 68 Pin-JLCC 4EA 5V 12ns 68 Pin-JLCC 4EA 5V 15ns Number HANBit Electronics Co.,Ltd.