H HiTRON UNIVERSAL INPUT HARMONIC CORRECTION AC-DC OPEN FRAME SINGLE & DUAL OUTPUT 150 WATTS INTERNAL SWITCHING POWER SUPPLIES HVP150 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC SOURCES MEET IEC1000-3-2 HARMONIC CORRECTION MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB. 22 CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION OUTPUT SPECIFICATION Input Voltage: Typ. 90-264Vac with PFC. Input Connector: AMP 643495-2 connector or Molex 5273-5A. Input Frequency: 47-63Hz. Inrush Current: Typ. 20A @230Vac (active). Input Current: Typ. 2.3A@ 115Vac, 0.76A @230Vac. Dielectric Withstand: Meet IEC950. EMI: Meet CISPR PUB.22 Class B. Hold-up Time: Typ. 30mS @115Vac & 230Vac. Power Fail Signal: Installed. Power Factor Correction: Meet Harmonic Correction per IEC1000-3-2 PF typ. 0.97-0.98. Earth Leakage: Less than 0.5mA@230Vac. Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Connector: AMP 640445-0 & 640456-2 or Molex 5273-10A & 6410-2A. Line Regulation: Typ. 0.1% Load Regulation: Main VO1 typ. ±1.0%. Aux. VO2 typ. ±5.0% (stacked-on). Noise & Ripple: Typ. 1.0% peak to peak. OVP: Built-in at main VO1 only. Remote Sensing: Available at VO1. Adjustability: Available at VO1. DC OK: Installed. Overload Protection (OLP): Fully protected against output overload and short circuit. Consult the factory for OLP setting. GENERAL SPECIFICATION Efficiency: Typ. 76%. Switching Frequency: Fixed freq. at 75K Hz. Circuit Topology: PWM fixed-frequency forward circuit. Transient Response: Output voltage returns in less than 3ms following a 25% load change. Safety Standard: UL1950/EN60950 Class I. Operating Temperature: 0 to +50°C. Storage Temperature: -20 to +85°C. Temperature Coefficient: Typ. 0.04% /°C. Cooling: Recommended 25 cfm fan cooling for full rating load. Construction: U-bracket construction format. Power Density: 2.50Watts / Cubic Inch. -57- OUTPUT VOLTAGE/CURRENT RATINGS CHART SINGLE OUTPUT MODEL NO. HVP150-10 HVP150-11 HVP150-12 HVP150-13 HVP150-14 HVP150-15 HVP150-16 HVP150-17 HVP150-190 Symbol:" DUAL OUTPUT MAIN VO1 @★# Typ. Volt. 28.0A 5.0V 12.0A 12.0V 9.6A 15.0V 6.0A 24.0V 5.2A 28.0V 4.0A 36.0V 4.5A 32.0V 3.0A 48.0V 28.0A 3.3V MAIN VO1 @★# Typ. Volt. 25.0A +5.0V 24.0A +5.0V 24.0A +5.0V 24.0A +5.0V 25.0A +5.0V 25.0A +3.3V 24.0A +3.3V 24.0A +3.3V 24.0A +3.3V MODEL NO. HVP150-20 HVP150-21 HVP150-22 HVP150-23 HVP150-290A HVP150-290B HVP150-291 HVP150-292 HVP150-23 AUX. VO2 †■ Typ. Volt. 2.0A +5.0V 2.0A +12.0V 1.6A +15.0V 1.0A +24.0V 2.0A +3.3V 2.0A +5.0V 2.0A +12.0V 1.6A +15.0V 1.0A +24.0V " OVP built-in. "@" Adjustable. "†" Stack on main output. "#" Remote sensing. "■" couple filter choke. MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 942.0g (33.2 Oz.) INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT AC INPUT ASSIGNMENT AC-L AC-N AC-G SINGLE/DUAL OUTPUT +VO1 +VO2 DC-COM P2-7,8,9,10 P2-2,3,4,5,6 HVP150-1X P1-1 P1-2 P1-3 P2-7,8,9,10 P2-1 P2-2,3,4,5,6 HVP150-2X P1-1 P1-2 P1-3 Mating connector: P1: AMP 640426-5 or Molex 5239-5A. P2: AMP 640427-0 or Molex 5239-10A, 5195-10A. P3 & P4: AMP 640440-2 or Molex 2695-2A. -58- DC COM P3-1 P3-1 ASSORTED SIGNALS POWER FAIL VO1 SENSE+ (Active Low) P3-2 P4-1 P3-2 P4-1 VO1 SENSEP4-2 P4-2