HITRON HVI13

H HiTRON
UNIVERSAL INPUT AC-DC PCB OPEN FRAME SINGLE &
DUAL OUTPUT 13-15 WATTS INTERNAL SWITCHING
POWER SUPPLIES HVI13 SERIES
FEATURES:
ACCOMMODATE UNIVERSAL AC SOURCES
LOW-PROFILE & COMPACT PCB FORMAT
MEET UNIVERSAL SAFETY STANDARDS
EMI MEET CISPR PUB. 22 & FCC CLASS B
CE MARKING COMPLIANCE
SPECIFICATION
INPUT SPECIFICATION
OUTPUT SPECIFICATION
Input Voltage: Range typ. 90-264Vac.
Output Voltage: See Ratings Chart.
Output Current: See Ratings Chart.
Output Wattage: Typ. 13-15watts.
Output Connector: Molex # 5045.
Line Regulation: Typ. 0.1%.
Load Regulation: Main VO1 typ. ±2.0%.
Aux. VO2 typ. ±5.0% (stacked on).
Noise & Ripple: Typ. 1.0% peak to peak.
OVP: Built-in at VO1 (Zener diode).
Adjustability: Available at VO1.
Overload Protection (OLP):
Fully protected against output overload and short circuit.
OLP set at about 125-150% rating output wattage.
Consult the factory for OLP setting.
Rating 100 to 240Vac.
Input Connector: Molex # 5045.
Input Frequency: 47-63Hz
Inrush Current: Typ. 26.0A @230Vac.
Input Current: Typ. 0.30A @115Vac, 0.15A@230Vac.
Dielectric Withstand: Meet IEC 60950-1.
EMI: Meet CISPR PUB. 22 & FCC Class B.
Hold-up Time: Typ. 10mS @115Vac, 40mS @230Vac.
Earth Leakage: Typ. 0.25mA @230Vac.
GENERAL SPECIFICATION
Efficiency: Typ. 70-80%.
Switching Frequency: 40 KHz.
Circuit Topology: Fixed Frequency Flyback Circuit.
Transient Response: Output voltage returns in
less than 3mS following
a 25% load change.
Safety Standard: IEC 60950-1/UL 60950-1 Class II.
Operating Temperature: 0 to +50°C.
Storage Temperature: -20 to +85°C.
Temperature Coefficient: Typ. 0.04%/°C.
Cooling: Free air convection.
Construction: PCB open frame format.
Power Density: 2.12 Watts / Cubic Inch.
Note: Due to requests in market and advances in technology, specifications subject to change without notification.
In application
-5-
OUTPUT VOLTAGE / CURRENT RATINGS CHART
DUAL OUTPUT
SINGLE OUTPUT
MAIN VO1
MODEL NO.
AUX. VO2 †
MAIN VO1
Typ.
Volt
Peak
HVI13-S033030
3.0A
3.3V
3.7A
HVI13-S050028
2.8A
5.0V
HVI13-S120012
1.2A
HVI13-S150010
MODEL NO.
Typ.
Volt.
Max.
Typ.
Volt.
Max.
HVI13-D033I
2.5A
+3.3V
3.5A
0.4A
+12V
0.5A
3.4A
HVI13-D033K
2.5A
+3.3V
3.5A
0.3A
+15V
0.4A
12.0V
1.5A
HVI13-D033M
2.5A
+3.3V
3.5A
0.2A
+24V
0.2A
1.0A
15.0V
1.2A
HVI13-D050I
2.0A
+5.0V
2.5A
0.4A
+12V
0.5A
HVI13-S240006
0.6A
24.0V
0.8A
HVI13-D050K
2.0A
+5.0V
2.5A
0.3A
+15V
0.4A
HVI13-S480003
0.3A
48.0V
0.4A
HVI13-D050M
2.0A
+5.0V
2.5A
0.2A
+24V
0.2A
Symbol: " " OVP built-in. "†" Stacked on main output.
Remark: (1) At least 20% of typical main output current is required to maintain stated regulation.
(2) Peak output, less than 60 Sec. with 10% duty cycle.
(3) Max. current can't be drawn from all output at the same time.
MECHANICAL DIMENSIONS: MM [INCHES]
WEIGHT: 62.0g (2.19 Oz.)
INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT
AC INPUT
ASSIGNMENT
AC-LINE
AC-NEUTRAL
P1-L
P1-N
CONNECTOR & PIN #
Mating connector: Molex 5051series or equivalent.
SINGLE OUTPUT
+VO1
DC-COM
P2-4,5
P2-1,2
-6-
VO1
P2-4,5
DUAL OUTPUT
VO2
P2-3
DC-COM
P2-1,2