H HiTRON UNIVERSAL INPUT HARMONIC CORRECTION AC-DC OPEN FRAME SINGLE & MULTI-OUTPUT 50-100 WATTS INTERNAL SWITCHING POWER SUPPLIES HVP93 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC SOURCES MEET IEC 61000-3-2 HARMONIC CORRECTION MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB. 22 CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION OUTPUT SPECIFICATION Input Voltage: Typ. 90-264Vac with PFC. Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Connector: Molex V-M connector. Output Wattage: Typ. 50 Watts. Convection. Max. 93 Watts under forced air flow. Line Regulation: Typ. 0.1-0.5%. Load Regulation: Main VO1: typ. ±1-2.0%. Aux. VO2: typ. ±3-5.0%. (P.R.) VO2: typ. ±2-3.0%. (P.R.) Aux. VO3: typ. ±2-3.0%. (P.R.) Noise & Ripple: Typ. 1% peak to peak. OVP: Installed in main VO1 only. Adjustability: Available at main VO1. OR-ing Diodes: Installed in VO1 & VO2. Overload Protection (OLP): Fully protected against output overload and short circuit. OLP set at about 125-150% rating output wattage. Consult the factory for OLP setting. Input Connector: Molex V-M connector. Input Frequency: 47-63Hz. Inrush Current: Typ. 23A @230Vac. Input Current: Typ. 1.5A@115Vac, 0.8A@230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet CISPR PUB. 22 Class B. Hold-up Time: Typ. 43mS @ 115Vac & 230Vac. Over Temp. Protection (OTP): Optional for U-Bracket format. Power Factor Correction: Meet Harmonic Correction per IEC 61000-3-2.PF typ.0.98-0.99. Earth Leakage: Less than 0.63mA. GENERAL SPECIFICATION Efficiency: Typ. 75%. Switching Frequency: Fixed freq. at 65K Hz. Circuit Topology: PWM Fixed-frequency Forward Circuit. Transient Response: Output voltage returns in less than 0.5mS following a 25% load change. Safety Standard: UL 60950-1/EN 60950-1 Class I. Power Density: 2.5-5.0 Watts / Cubic Inch PCB format. 1.7- 3.37 Watts / Cubic Inch U-Bracket format. Operating Temperature: 0 to +50°C at full load and 30 cfm forced airflow for full load. Storage Temperature: -20 to +85°C. Temperature Coefficient: Typ. 0.04% /°C. Cooling: At least 20 cfm forced cooling air is required for 90 watts and up load Construction: PCB or U-bracket open frame format. Note: Due to requests in market and advances in technology, specifications subject to change without notification. In application -41- OUTPUT VOLTAGE / CURRENT RATINGS CHART SINGLE OUTPUT DUAL OUTPUT MAIN VO1 MODEL NO. Convection Cooling HVP93-S033250 HVP93-S050200 @⊙ MAIN VO1 @⊙ AUX. VO2 ⊙■ or ● Volt. 30cfm air cooling MODEL NO. Convection Cooling Volt. 12.0A 3.3V 25.0A HVP93-D050I 6.0A +5.0V 10.0A 10.0A 5.0V 20.0A HVP93-D050K 6.0A +5.0V 10.0A HVP93-S120085 4.2A 12.0V 8.5A HVP93-D050M 6.0A +5.0V HVP93-S150068 3.4A 15.0V 6.8A HVP93-D033I 8.0A +3.3V HVP93-S240043 2.1A 24.0V 4.3A HVP93-D033K 8.0A HVP93-S280038 1.8A 28.0V 3.8A HVP93-D033M 8.0A HVP93-S360030 1.5A 36.0V 3.0A HVP93-S480022 1.2A 48.0V 2.2A 30cfm air Convection cooling Cooling Volt. 30cfm air cooling 2.0A +12.0V 4.0A 1.6A +15.0V 3.2A 10.0A 1.0A +24.0V 2.0A 12.0A 2.0A +12.0V 4.0A +3.3V 12.0A 1.6A +15.0V 3.2A +3.3V 12.0A 1.0A +24.0V 2.0A TRIPLE OUTPUT (PCB VERSION) MAIN VO1 @⊙ AUX. VO2 ⊙● or ■ AUX. VO3 ● MODEL NO. Convection Cooling Volt. HVP93-T050II 4.0A +5.0V 10.0A 1.5A +12.0V 3.0A HVP93-T050IE 4.0A +5.0V 10.0A 1.5A +12.0V 3.0A HVP93-T050MI 4.0A +5.0V 10.0A 0.8A +24.0V HVP93-T050KK 4.0A +5.0V 10.0A 1.2A HVP93-T033II 5.0A +3.3V 12.0A 1.5A HVP93-T033KK 5.0A +3.3V 12.0A 1.2A 30cfm air Convection cooling Cooling 30cfm air Convection cooling Cooling Volt. 30cfm air cooling 1.0A -12.0V 1.5A 1.0A -5.0V 1.5A 1.5A 1.0A -12.0V 1.5A +15.0V 2.4A 0.8A -15.0V 1.2A +12.0V 3.0A 1.0A -12.0V 1.5A +15.0V 2.0A 0.8A -15.0V 1.2A Volt. Symbol: "★" OVP built-in "@" Adjustable "#" Remote sensing "●" Post Regulator "■" couple common choke "⊙" Installed with OR-ing diodes. MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: PCB 358.0g(12.6 Oz.) U-Bracket 541.0g(19.0 Oz.) U-Bracket FORMAT PCB FORMAT INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT AC INPUT INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT DUAL OUTPUT ASSIGNMENT AC-L AC-N AC-G VO1 VO2 CNTR & PIN L N GND P2-7,8 P2-1 Mating connector: Molex 5195 or 5239 series DC COM P2-2,3, 4,5,6 AC INPUT ASSIGNMENT CNTR & PIN AC-L AC-N AC-G P1-L P1-N G DUAL OUTPUT TRIPLE OUTPUT DC DC VO1 VO2 VO3 VO2 COM COM P2-3, P2-4, P2-1,2 P2-6,7 P2-2,3 P2-7 P2-1 4,5 5,6 VO1 Mating connector: Molex 5195 or 5239 series -42-