H HiTRON UNIVERSAL INPUT HARMONIC CORRECTION(PFC) AC-DC MEDICAL & ITE APPLICATION INTERNAL OPEN FRAME SWITCHING POWER SUPPLIES 150 WATTS SINGLE, DUAL, TRIPLE & QUAD OUTPUT HIMP151 SERIES FEATURES: 5” X 3” X 1.38” COMPACT SIZE ACCOMMODATE UNIVERSAL AC INPUT MEET IEC 61000-3-2 HARMONIC CORRECTION EMI MEET CISPR EN 55022/EN 55011 & FCC CLASS B CONDUCTED MEET UNIVERSAL SAFETY STANDARDS CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION OUTPUT SPECIFICATION Input Voltage: Typical 90-264Vac with PFC. Input Connector: Molex connector or equivalent. Input Frequency: 47-63Hz. Inrush Current: 9.3-11.3Arms at 230Vac. Input Current: Typical 2.2A at 115Vac, 0.9A at 230Vac. Dielectric Withstand: Meet IEC 60950-1/IEC60601-1. EMI: Meet CISPR EN 55022 & FCC Class B conducted. Meet CISPR EN 55011 & FCC Class B conducted. Hold-up Time: Typical 90mS at 115Vac & 230Vac. Power Factor & Harmonic Correction: Meet IEC 61000-3-2, PF typical 0.99 at full load. Over Temperature Protection: Installed. Leakage Current: 0.40-0.50mA at 230Vac touch current. Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Connector: Molex connector or equivalent. Output Wattage: Max. 150 Watts. Line Regulation: Typical 1.0%. Load Regulation: Single O/P VO1 ±3.0%. Dual O/P VO1 ±3.0% VO2 ±1.0% Triple O/P VO1 ± 3.0% (± 8% for 3.3V), VO2/VO3 ±3.0%. Quad O/P VO1/VO2/VO3/VO4 ±3.0% Noise & Ripple: Typical 1.0-2.0% peak to peak. OVP: Built-in at VO1 and VO2. Adjustability: Available at VO1 and VO2. Overload Protection (OLP): Fully protected against output overload and short circuit. OLP set at about 125-150% rating output wattage. Consult the factory for OLP setting. GENERAL SPECIFICATION Efficiency: Typical 76-80%. (various with output) Switching Frequency: 68K Hz. Circuit Topology: Single Fixed Frequency Forward circuit. Dual/Triple/Quad: Fixed Freq. Flyback circuit. Transient Response: Output voltage returns in less than 14.8-25.2mS following a 25% load change. Safety Standard: IEC 60950-1 Class I for ITE use. IEC 60601-1 Class I for Medical use. Operating Temperature: 0 to +50°C under 30 CFM forced air cooling for full load. Storage Temperature: -20 to +85°C. Cooling: Requested 30 CFM/650LFM forced air flow for full load. Construction: 4.5”x2.5“x1.2” PCB format. Power Density: 6.52-7.24 Watts / Cubic Inch. NOTE: (1)All measurement are at nominal input, full load and +25°C unless otherwise specifications. (2)Due to requests in market and advances in technology, specifications subject to change without notification. For the details of safety approval, please consult the factory. -45- OUTPUT VOLTAGE / CURRENT RATINGS CHART DUAL OUTPUT (Under forced air cooling) SINGLE OUTPUT (Under air cooling) MAIN VO1 ★@ Typ. Volt. Max. MODEL NO. MODEL NO. MAIN VO1 ★@ Typ. Volt. Max. AUX. VO2 ★@ Typ. Max. Volt. HIMP151-S050270 27.0A 5V 30.0A HIMP151-D050I 15.00A +5V 15.00A 6.00A +12V 6.00A HIMP151-S120125 12.5A 12V 12.5A HIMP151-D050M 15.0A +5V 15.0A 3.00A +24V 3.00A HIMP151-S150100 10.0A 15V 10.0A HIMP151-D120I 6.25A +12V 6.25A 6.25A +12V 6.25A HIMP151-S240063 6.3A 24V 6.3A HIMP151-D150K 5.0A +15V 5.00A 5.00A +15V 5.00A HIMP151-S480031 3.1A 48V 3.1A TRIPLE OUTPUT (Under forced air cooling) MAIN VO1 ★@ Typ. Volt. Max. AUX. VO2 ★@ Typ. Max. Volt. AUX. VO3 ● Typ. Volt. Max. HIMP151-T033EI 18A +3.3V 20A 13.5A +5V 15A 0.8A +12V 0.8A HIMP151-T050II 15A +5.0V 15A 5.5A +12V 5.5A 0.8A +12V 0.8A HIMP151-T050KK 15A +5.0V 15A 4.5A +15V 4.5A 0.5A +15V 0.5A MODEL NO. QUAD OUTPUT (Under forced air cooling) MODEL NO. MAIN VO1 ★@ Typ. Volt. Max. 15A HIMP151-Q050KKE +5V 15A AUX. VO2 ★@ Typ. Max. Volt. 4A 4A +15V AUX. VO3 ● Typ. Volt. Max. AUX. VO4 ● Typ. Max. Volt. 0.8A 0.5A -15V 0.8A -5V 0.5A Symbol: "★" OVP built-in. "@" Adjustable. "●" Post –Regulated Remark: Please refer to the derating chart depending on ambient temperature and fan cooling. MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 385.0g (13.4 Oz.) Single O/P Multiple O/P INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT AC INPUT ASSIGNMENT AC AC- AC-L N G P1- P1- P1CNTR & PIN # L N G SINGLE O/P VO1 P2-1,2, 3,4,5,6 DCCOM DUAL O/P VO1 VO2 P2-7,8,9 P2-1,2,3, P2-9,10 10,11,12 4 TRIPLE O/P DCCOM VO1 P2-5, 6,7,8 P2-1,2, 3,4 Mating connector: Moles 5195 or 5239 series. -46- VO2 P2-9,10 QUAD O/P VO3 DCCOM VO1 VO2 VO3 +VO4 DC COM P2-11 P2-5, 6,7,8 P2-1, 2,3,4 P2-9,10 P2-11 P2-12 P2-5,6, 7,8