H HiTRON UNIVERSAL INPUT AC-DC INTERNAL OPEN FRAME SWITCHING POWER SUPPLIES 72 WATTS SINGLE, DUAL & TRIPLE OUTPUT HVI72 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC INPUT OPEN FRAME OR BOX FORMATS LOW COST COMMERCIAL GRADE MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB. 22 & FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION OUTPUT SPECIFICATION Input Voltage: Range 90-264Vac. Rating 100 to 240Vac. Input Connector: B-S or Molex connector or equivalent. Input Frequency: 47-63Hz. Inrush Current: Typical 25A peak at 230Vac. Input Current: Typical 2.0A at 115Vac, 0.6 A at 230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet CISPR PUB. 22 & FCC Class B. No Load Operation: No damage. Overshoot: No voltage spike while power ON/OFF. Hold-up Time: Typical 20mS at 115Vac, Typical 80mS at 230Vac. Earth Leakage Current: Less than 0.5mA at 230Vac. Output Voltage: See Ratings Chart. Output Current: See Rating Chart. Output Connector: B-S or Molex connector or equivalent. Output Wattage: Typical 72 Watts. Line Regulation: Typical 0.1%. Load Regulation: Main VO1 typ. ±1.0%. Aux. VO2 typ. ±3.0%. (stacked on) Aux. VO3/VO4 typ. ±2.0%. (P.R.) Noise & Ripple: Typical 1.0% peak to peak. OVP: Built-in at main VO1 (Latch). Adjustability: Available at main VO1. LED Indicator: Output indicating. Overload Protection (OLP): Fully protected against output overload and short circuit. OLP set at about 125-150% rating output wattage. Consult the factory for OLP setting. GENERAL SPECIFICATION Efficiency: Typical 72%. (various with output voltage) Switching Frequency: Fixed frequency 45KHz. Circuit Topology: Fixed Frequency Flyback Circuit. Transient Response: Output voltage returns in less than 3mS following a 25% load change. Safety Standard: Meet UL 60950-1/EN 60950-1 Class I. Operating Temperature: 0 to +50°C. Storage Temperature: -20 to +85°C. Temperature Coefficient: Typical 0.03% /°C. Cooling: Free air convection cooling. Construction format: L-Bracket or enclosure box format. Power Density: 2.0 Watts / Cubic Inch. NOTE: (1)All measurement are at nominal input, full load and +25°C unless otherwise specifications. (2)Due to requests in market and advances in technology, specifications subject to change without notification. In application. -67- OUTPUT VOLTAGE / CURRENT RATINGS CHART SINGLE OUTPUT MODEL NO. HVI72-10 HVI72-11 HVI72-12 HVI72-13 HVI72-14 HVI72-15 HVI72-19 MAIN VO1 @ Typ. Volt. 14.0A 5.0V 6.0A 12.0V 4.8A 15.0V 3.0A 24.0V 2.3A 32.0V 1.6A 48.0V 14.0A 3.3V TRIPLE OUTPUT MAIN VO1 @ Typ. Volt. 7.0A HVI72-30 +5V 7.0A HVI72-31 +5V 7.0A HVI72-32 +5V 7.0A HVI72-33 +5V HVI72-050060-BG 6.0A +5V MODEL NO. AUX. +VO2 † Typ. Volt. 2.0A +12V 2.0A +12V 1.0A +24V 1.5A +15V 2.0A +12V AUX. ±VO3 ● Typ. Volt. 1.0A 12V 1.0A 5V 1.0A 12V 1.0A 15V 1.0A -12V QUAD OUTPUT MODEL NO. HVI72-40 HVI72-41 HVI72-42 HVI72-43 HVI72-43A MAIN VO1 @ Typ. Volt. 6.5A +5V 6.5A +5V 6.5A +5V 6.5A +5V 5.0A +5V AUX. +VO2 † Typ. Volt. 2.0A +12V 2.0A +12V 1.0A +24V 1.6A +15V 1.5A +15V AUX. ±VO3 ● Typ. Volt. 0.5A 12V 1.0A 5V 0.5A 12V 0.5A 15V 1.0A -15V AUX. -VO4 ● Typ. Volt. 0.5A -12V 1.0A -5V 0.5A -12V 0.5A -15V 1.0A -5V Symbol: "" OVP built-in. "@" Adjustable. "†" Stacked on main O/P. "●" Installed with Post Regulator (P.R.). Remark: At least 20% of typical main output current is required to maintain stated regulation. MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: L-B 396.0g (13.97 Oz.) Box 489.0g (1.25 Oz.) INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT AC INPUT ASSIGNMENT AC-LINE AC-NEUTRAL P1-1 P1-2 B-S CNTR & PIN# P2-L P2-N V-M CNTR & PIN# Mating connector: P2 Molex 5195 or 5239 series. AC-GROUND P1-3 P2-G SINGLE OUTPUT VO1 DC-COM P1-5 P1-4 P3-4,5,6 P3-1,2,3 -68- VO1 P1-8 P3-7,8 TRIPLE / QUAD OUTPUT VO2 VO3 VO4 DC-COM P1-6 P1-5 P1-4 P1-7 P3-3 P3-2 P3-1 P3-4,5