MACOM 2-1393122-4

General Purpose Relays
Industrial Relays
Potter & Brumfield
KHA Series Panel Plug-in Relay
n
Compact package
Two and four pole Form C contact arrangements
n Polycarbonate or nylon dust cover
n Various mounting configurations
n Indicator lamp and push-to-reset options available
n Various contact materials available for specific load requirements
n
Typical applications
Industrial sewing/stitching machines, fitness, elevators, pumps, robotics,
solar panels
Approvals
Coil Data
UL E22575; CSA LR15734
Coil voltage range
Coil insulation system according UL
Technical data of approved types on request
Contact Data
Contact arrangement2 form C (2CO), 4 form C (4CO)
Rated voltage
240VAC
Rated current
1-5A
Contact material
Ag, AgCdO, Au-AgNi,
Au overlay Ag, Au diffused Ag
Contact style
Single contact or bifurcated crossbar
Min. recommended contact load
Ag (single contact)
100mA, 12VDC
AgCdO (single contact)
300mA, 12VDC
Au-AgNi (single contact)
10mA, 12VDC
Au overlay Ag (bifurcated crossbar)
Dry circuit
Au diffused Ag (single contact)
50mA, 12VDC
Initial contact resistance
Ag, AdCdO 100mΩ
Au-AgNi, Au overlay Ag, Au diffused Ag 200mΩ
Frequency of operation
360 ops./hour
Operate/release time max.
13/6ms
Contact ratings
Type
Load
UL 508
Ag
5A, 120VAC, general purpose
2.5A, 240VAC, general purpose
1/10HP, 120/240VAC
180VA, 250VAC, pilot duty
42VA, 28VDC, pilot duty
AgCdO
5A, 120VAC, general purpose
2.5A, 240VAC, general purpose
1/10HP, 120/240VAC
180VA, 250VAC, pilot duty
42VA, 28VDC, pilot duty
5A, 240VAC, general purpose
5A, 28VDC, resistive
Au-AgNi
2A, 120VAC, resistive
Au overlay Ag 1A, 120VAC
1A, 30VDC
Au diffused Ag 5A, 120VAC, general purpose
2.5A, 240VAC, general purpose
1/10HP, 120/240VAC
180VA, 250VAC, pilot duty
42VA, 28VDC, pilot duty
Cycles
Note: The relay should only carry ≤15A continuously (all poles combined).
Mechanical endurance
10x106 ops.
08-2011, Rev. 0811
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
UC
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
5 to 240VDC
6 to 240VAC
Class B
Coil versions, DC coil
Coil
Rated
Operate
ReleaseCoil
Rated coil
code
voltage
voltagevoltage
resistance
power
VDC
VDC
Ω±10%
mW
5
5
3.75
32
800
6
6
4.5
40
900
12
12
9.0
160
900
24
24
18.0
690
850
48
48
36.0
2600
900
110
110
82.5
11000
1100
220/240 Use 110V relay with series dropping
5W resistor of 11KΩ
All figures are given for coil without preenergization, at ambient temperature +23°C.
Coil versions, AC coil
Coil
Rated
Operate
code
voltage
voltage
VAC
VAC
6
6
5.1
12
12
10.2
24
24
20.4
48
48
40.8
120
120
102.0
240
240
204.0
Coil
resistance
Ω±15%
10.5
43
160
668
3900
12000
Rated coil
power
VA
1.2
1.2
1.25
1.2
1.35
1.5
All figures are given for coil without preenergization, at ambient temperature +23°C.
Insulation Data
Initial dielectric strength
between open contacts
between contact and coil
between adjacent contacts
between coil and frame
Initial insulation resistance
between insulated elements
1000Vrms
1500Vrms
1500Vrms
1500Vrms
100MΩ at 500VDC
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
-45ºC to 70ºC
Category of environmental protection
IEC 61810
RTI - dust protected
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ section, application notes and all specifications
are subject to change.
1
General Purpose Relays
Industrial Relays
Potter & Brumfield
KHA Series Panel Plug-in Relay (Continued)
Other Data (continued)
Accessories
Vibration resistance (destructive).062” double amplitude, 5-55Hz,
6h, mechanical
Shock resistance (functional)
15g, 11ms (mechanical)
Terminal type solder/plug-in .105” (2.67mm),
pcb-tht .112” (2.84mm)
Weight
45g
Packaging/unit tray/50 pcs., box/250pcs.
For details see datasheet
Product Code
27E894 27E166 27E006 27E007 Sockets and Accessories, KHA Relays
Description
DIN socket (use 20C426 clip)
Panel/track mount socket (use 20C297 clip)
Solder/grounding socket (use 20C217 clip)
PCB/grounding socket (use 20C217 clip)
NOTE: Relays with contact current <50mA are not recommended for use in sockets.
Dimensions
KHAU and KHAX types
.859 MAX.
(21.82)
.750
(19.05)
.313
(7.95)
#3-48
THREAD
1 2 3
5 6 7
9 10 11 12
.265 ± .046
(6.73 ± 1.17)
.219
(5.56)
1.281 MAX.
(32.54)
1.600 MAX WI TH
INDICATOR LAMP
(38.10)
.263
(6.68)
.312 ± .031
(7.92 ± .79)
4
8
.180 DIA.
BOSSES (4.57)
.168 ± 020
(4.27 ± .51)
.168
(4.27)
.052 REF.
(1.32)
1.109 MAX.
(28.17)
.250
(6.35)
.040 ± .010
(1.02 ± .25)
.797 ± .020
(20.24 ± .51)
.022 ± .015
(.56 ± .38)
.125 DIA.
(3.18)
PCB terminals
KHAE and KHAF types
.421 ± .046
(10.69 ± 1.17)
1
5
9
1
5
9
13
+
14
-
2
6
10
4 pole version
3
7
11
4
8
12
13
14
+
-
08-2011, Rev. 0811
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
.160
(4.06)
.410
(10.41)
.660
(16.76)
14
PLACES
.070 DIA.
(1.78)
Polarity shown for LED indicator
2
Printed circuit terminal thickness .022 (.558)
PCB layout
Bottom view on solder pins
4 Form C
4
8
12
.112
(2.84)
.525
(13.34)
Terminal assignment
2 Form C
.047
REF.
(1.19)
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
.175
(4.45)
.525
(13.34)
.350
(8.89)
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ section, application notes and all specifications
are subject to change.
General Purpose Relays
Industrial Relays
Potter & Brumfield
KHA Series Panel Plug-in Relay (Continued)
Product code structure
Typical product code
KHA U -17 A
1
1
B -120
Type
KHA General purpose multi-contact relay
Note: Some KHA models available in KH construction. Specify KH instead of KHA
Version
E Printed circuit terminals, nylon dust cover, contacts rated opposite polarity (UL & CSA).
U Solder terminals, clear polycarbonate dust cover, contacts rated same polarity (UL & CSA).
F Printed circuit terminals, nylon dust cover, contacts rated same polarity (UL & CSA).
X Solder terminals, clear polycarbonate dust cover, contacts rated opposite polarity (UL & CSA).
Contact arrangement
11 2 form C (2CO)
17 4 form C (4CO)
Coil Input
A AC
D DC
Mounting and termination
1 Socket mount, solder terminals on U versions; printed circuit terminals on E versions.
T Top flange mount, solder terminals on U versions; printed circuit terminals on E versions.
Note 1: Mounting options with solder terminals and stud on narrow, broad and end side on request
Contact material
1 Ag
2 AgCdO
3 Au-AgNi (Note 2)
6 Bifurcated crossbar, Au overlay Ag
8 Au diffused Ag
Note 2: Contact material code 3 is not available with relay version E
Options
B Push to test button. (not available on version E relays with 4 form C contacts)
N Neon indicator. Only available with version U, 120VAC or 110VDC coils.
H Neon indicator and push to test button. Only available with version U, 120VAC or 110VDC coils.
L LED indicator. Only available with version U, 6-48VAC or VDC coils.
M LED indicator and push to test button. Only available with version U, 6-48VAC or VDC coils.
Coil voltage
Coil code: please refer to coil versions table
Product Code
KHAU-11A11-120
KHAU-11D11-24
KHAE-17D12-24
KHAU-17A11-12
KHAU-17A11-24
KHAU-17A11-120
KHAU-17A11N-120
KHAU-17A12-120
KHAU-17A13-120
KHAU-17A16-24
KHAU-17A16-120
KHAU-17A18-120
KHAU-17D11-6
KHAU-17D11-12
KHAU-17D11-24
KHAU-17D11-48
KHAU-17D11-110
KHAU-17D12-12
KHAU-17D12-24
KHAU-17D12-48
KHAU-17D12-110
KHAU-17D16-12
KHAU-17D16-24
KHU-17A11N-120
KHU-17D11-12
KHU-17D12-24
Arrangement
Contact Material
Coil
Terminals
Options
Part Number
2 form C, 2 CO
Ag
120VAC
24VDC
Solder/Plug-in
None
4 Form C, 4 CO
AgCdO
Ag
1-1393122-0
1-1393122-5
1393122-1
1-1393122-9
2-1393122-1
2-1393122-0
2-1393122-6
2-1393122-8
3-1393122-6
3-1393122-8
3-1393122-7
3-1393122-9
4-1393122-7
4-1393122-3
4-1393122-4
4-1393122-5
4-1393122-2
5-1393122-5
5-1393122-7
5-1393122-8
5-1393122-4
7-1393122-0
7-1393122-1
2-1393123-8
4-1393123-0
4-1393123-8
08-2011, Rev. 0811
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
AgCdO
Au-Ag-Ni
Bifurcated, Au overlay Ag
Ag
Au diffused Ag
Ag
AgCdO
Bifurcated, Au overlay Ag
Ag
AgCdO
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
12VAC
24VAC
120VAC
PCB
Solder/Plug-in
Solder
Indicator
None
24VAC
120VAC
6VDC
12VDC
24VDC
48VDC
110VDC
12VDC
24VDC
48VDC
110VDC
12VDC
24VDC
120VAC
12VDC
24VDC
Indicator, Old Const.
Old Construction
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ section, application notes and all specifications
are subject to change.
3