technical data IL1084T2 CHIP LOW DROPOUT POSITIVE REGULATOR 5A Features ♦ Output Current - 5A ♦ Maximum Input Voltage – 12V ♦ Adjustable Output Voltage or Fixed 1.5V, 1.8V, 2.5V, 2.85V, 3.3V, 3.6V, 5V ♦ Current Limiting and Thermal Protection ♦ Standard 3-Pin Power Packages ♦ Post Regulator for Switching DC/DC Converter ♦ High Efficiency Liner Regulators ♦ Battery Charger 2 3 4 Applications Y Physical Characteristics: 5Y • Chip size……….1.9 x 2.2 mm ♦ Wafer Diameter ……100 ± 0.5 mm ♦ Wafer thickness ….. 280 ± 20 µm ♦ Scribe width ………...100 µm ♦ Metallization bottom... Ti-Ni-Ag Ti-Ni – 0.5-0.7µm Ag – 0.6-0.1µm 1 X ♦Passivation …………. PSG Pad Location Coordinates N 1 2 3 4 5 Pad names NC INPUT OUTPUT INPUT GND Pad size 130x130 150x340 600x150 150x340 130x130 X(µm) 251 1961 1251 991 88 Y (µm) 88 780 875 780 311 Absolute Maximum Ratings (Note 1) Power Dissipation (Note 2) Internally Limited Junction Temperature (Note 3) 150°C Storage Temperature Range -65°C to 150°C Storage Temperature Range -65°C to 150°C Operating Ratings Junction Temperature Range (Note 3) -10°C to 125°C ELECTRICAL CHARACTERISTICS Typicals and limits appearing in normal type apply for Tj= +25°C. Limits appearing in Boldface type apply over the entire junction temperature range for operation. Min Typ Max Symbol Parameter Conditions (Note 5) (Note 4) (Note 5) VOUT Output Voltage (Note 6) IL1084-Adj BT2 IOUT=10mA,VIN=4.25V 0≤ IOUT≤IFULL LOAD,2.75V≤VIN≤10V IL1084-1.5 BT2 IOUT=10mA,VIN=4.5V 0≤ IOUT≤IFULL LOAD,3.0V≤VIN≤10V IL1084-1.8 BT2 IOUT=10mA,VIN=4.8V 0≤ IOUT≤IFULL LOAD,3.3V≤VIN≤10V IL1084-2.5 BT2 IOUT=10mA,VIN=5.5V 0≤ IOUT≤IFULL LOAD,4.0V≤VIN≤10V IL1084-2.85 BT2 IOUT=10mA,VIN=5.85V 0≤ IOUT≤IFULL LOAD,4.35V≤VIN≤10V IL1084-3.3 BT2 IOUT=10mA,VIN=6.3V 0≤ IOUT≤IFULL LOAD,4.8V≤VIN≤10V IL1084-3.6 BT2 IOUT=10mA,VIN=6.6V 0≤ IOUT≤IFULL LOAD,5.1V≤VIN≤10V IL1084-5.0 BT2 IOUT=10mA,VIN=8.0V 0≤ IOUT≤IFULL LOAD,6.5V≤VIN≤10V 1 1.237 1.232 1.225 1.485 1.478 1.470 1.782 1.773 1.764 2.475 2.463 2.450 2.820 2.805 2.790 3.270 3.250 3.235 3.564 3.546 3.528 4.950 4.925 4.900 1.250 1.250 1.250 1.500 1.500 1.500 1.800 1.800 1.800 2.500 2.500 2.500 2.850 2.850 2.850 3.300 3.300 3.300 3.600 3.600 3.600 5.000 5.000 5.000 1.263 1.268 1.275 1.515 1.522 1.530 1.818 1.827 1.836 2.525 2.537 2.550 2.880 2.895 2.910 3.330 3.350 3.365 3.636 3.654 3.672 5.050 5.075 5.100 Units V technical data IL1084 BT2 CHIP LOW DROPOUT POSITIVE REGULATOR 5A ELECTRICAL CHARACTERISTICS Typicals and limits appearing in normal type apply for Tj= +25°C. Limits appearing in Boldface type apply over the entire junction temperature range for operation. ∆VOUT Line Regulation (Note 7) IL1084-Adj BT2 IOUT=10mA, 2.75V≤VIN≤10V IL1084-1.5 BT2 IOUT=10mA, 3.0V≤VIN≤10V IL1084-1.8 BT2 IOUT=10mA, 3.3V≤VIN≤10V IL1084-2.5 BT2 IOUT=10mA, 4.0V≤VIN≤10V IL1084-2.85 BT2 IOUT=10mA, 4.35V≤VIN≤10V IL1084-3.3 BT2 IOUT=10mA, 4.8V≤VIN≤10V IL1084-3.6 BT2 IOUT=10mA, 5.1V≤VIN≤10V IL1084-5.0 BT2 IOUT=10mA, 6.5V≤VIN≤10V ∆VOUT Load Regulation (Note 7) IL1084-Adj BT2 VIN=4.25V, 0≤ IOUT≤IFULL LOAD IL1084-1.5 BT2 IL1084-1.8 BT2 VIN=5.0V, 0≤ IOUT≤IFULL LOAD IL1084-2.5 BT2 IL1084-2.85 BT2 IL1084-3.3 BT2 VIN=5.0V, 0≤ IOUT≤IFULL LOAD IL1084-3.6 BT2 VIN=5.3V, 0≤ IOUT≤IFULL LOAD IL1084-5.0 BT2 VIN=8.0V, 0≤ IOUT≤IFULL LOAD ∆V Dropout Voltage ∆VREF=1%, IOUT=5A (Note 8) IO(MIN) Minimum Load VIN=10V Current ILIMIT Current Limit VIN=6.25V 5.5 IADJ Adjust Pin Current VIN=2.75÷10V,IOUT=10mA Adjust Pin Current IOUT=10mA÷5A, VIN=2.75÷10V ∆IADJ Change RR Ripple Rejection fRIPPLE = 120Hz, COUT=25µF 60 Tantalum, Iout=5A;V I N =4.25V S Temperature Stability 0.5 - 0.3 0.4 6 10 6 10 6 10 6 10 6 10 6 10 6 10 0.3 0.4 % mV % mV 12 20 15 20 15 25 20 35 1.5 V 10 mA 120 5 A µA µA - dB - % NOTES 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Rating indicate conditions for which the device is intended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test conditions, see the Electrical Characteristics. NOTES 2: Power Dissipation is kept in a safe range by current limiting circuitry. Refer to Overload Recovery in Application Notes. NOTES 3: The maximum power dissipation is a function of Tj(MAX), ΘjA and T A . The maximum allowable power dissipation at any ambient temperature is PD=(Tj(MAX) – T A)ΘjA. NOTES 4: Typical Values represent the most likely parametric norm NOTES 5: All limits are guaranteed by testing or statistical analysis NOTES 6: IFULL LOAD is defind in the current limit curves . The IFULL LOAD curve defines the current limit as a function of input-to-output voltage . NOTES 7: Load and Line regulation are measured at constant junction temperature , and are guaranteed up to the maximum power dissipation of 30W.Power dissipation is determined by the input/output differential and the output current. Guaranteed maximum power dissipation will not be available over the full input/output range. NOTES 8: Dropout voltage is specified over the full output current range of the device. 2