AVX 02013J2R6BBSTR-ND

Accu-F® / Accu-P®
Thin-Film Technology
THE IDEAL CAPACITOR
1
The non-ideal characteristics of a real capacitor can be
ignored at low frequencies. Physical size imparts inductance
to the capacitor and dielectric and metal electrodes result in
resistive losses, but these often are of negligible effect on the
circuit. At the very high frequencies of radio communication
(>100MHz) and satellite systems (>1GHz), these effects
become important. Recognizing that a real capacitor will
exhibit inductive and resistive impedances in addition to
capacitance, the ideal capacitor for these high frequencies is
an ultra low loss component which can be fully characterized
in all parameters with total repeatability from unit to unit.
Until recently, most high frequency/microwave capacitors
were based on fired-ceramic (porcelain) technology. Layers
of ceramic dielectric material and metal alloy electrode paste
are interleaved and then sintered in a high temperature oven.
This technology exhibits component variability in dielectric
quality (losses, dielectric constant and insulation resistance),
variability in electrode conductivity and variability in physical
size (affecting inductance). An alternate thin-film technology
has been developed which virtually eliminates these variances. It is this technology which has been fully incorporated
into Accu-F® and Accu-P® to provide high frequency capacitors exhibiting truly ideal characteristics.
The main features of Accu-F® and Accu-P® may be summarized as follows:
• High purity of electrodes for very low and repeatable
ESR.
• Highly pure, low-K dielectric for high breakdown field,
high insulation resistance and low losses to frequencies
above 40GHz.
• Very tight dimensional control for uniform inductance,
unit to unit.
• Very tight capacitance tolerances for high frequency
signal applications.
This accuracy sets apart these Thin-Film capacitors from
ceramic capacitors so that the term Accu has been
employed as the designation for this series of devices, an
abbreviation for “accurate.”
THIN-FILM TECHNOLOGY
Thin-film technology is commonly used in producing semiconductor devices. In the last two decades, this technology
has developed tremendously, both in performance and in
process control. Today’s techniques enable line definitions of
below 1μm, and the controlling of thickness of layers at 100Å
(10-2μm). Applying this technology to the manufacture of
capacitors has enabled the development of components
where both electrical and physical properties can be tightly
controlled.
The thin-film production facilities at AVX consist of:
• Class 1000 clean rooms, with working areas under
laminar-flow hoods of class 100, (below 100 particles
per cubic foot larger than 0.5μm).
• High vacuum metal deposition systems for high-purity
electrode construction.
• Photolithography equipment for line definition down to
2.0μm accuracy.
• Plasma-enhanced CVD for various dielectric depositions (CVD=Chemical Vapor Deposition).
• High accuracy, microprocessor-controlled dicing saws
for chip separation.
• High speed, high accuracy sorting to ensure strict
tolerance adherence.
TERMINATION
ALUMINA
ELECTRODE
SEAL
ELECTRODE
DIELECTRIC
ALUMINA
ACCU-P® CAPACITOR
6
Accu-F® / Accu-P®
Thin-Film Chip Capacitors
ACCU-F® TECHNOLOGY
ACCU-P® TECHNOLOGY
The use of very low-loss dielectric materials, silicon dioxide
and silicon oxynitride, in conjunction with highly conductive
electrode metals results in low ESR and high Q. These
high-frequency characteristics change at a slower rate with
increasing frequency than for ceramic microwave capacitors.
Because of the thin-film technology, the above-mentioned
frequency characteristics are obtained without significant
compromise of properties required for surface mounting.
The main Accu-F® properties are:
• Internationally agreed sizes with excellent dimensional
control.
• Small size chip capacitors (0603) are available.
• Tight capacitance tolerances.
• Low ESR at VHF, UHF and microwave frequencies.
• High stability with respect to time, temperature, frequency
and voltage variation.
• Nickel/solder-coated terminations to provide excellent
solderability and leach resistance.
As in the Accu-F® series the use of very low-loss dielectric
materials (silicon dioxide and silicon oxynitride) in conjunction
with highly conductive electrode metals results in low ESR and
high Q. At high frequency these characteristics change at
a slower rate with increasing frequency than conventional
ceramic microwave capacitors. Using thin-film technology, the
above-mentioned frequency characteristics are obtained without significant compromise of properties required for surface
mounting. The use of high thermal conductivity materials
results in excellent RF power handling capabilities.
The main Accu-P® properties are:
• Enhanced RF power handling capability.
• Improved mechanical characteristics.
• Internationally agreed sizes with excellent dimensional control.
• Ultra Small size chip capacitors (0201) are available.
• Tight capacitance tolerances.
• Low ESR at UHF, VHF, and microwave frequencies.
• High-stability with respect to time, temperature, frequency
and voltage variation.
• High temperature nickel/solder-coated terminations as standard to provide excellent solderability and leach resistance.
ACCU-F® FEATURES
Accu-F® meets the fast-growing demand for low-loss
(high-Q) capacitors for use in surface mount technology especially for the mobile communications market, such as cellular
radio of 450 and 900 MHz, UHF walkie-talkies, UHF cordless
telephones to 2.3 GHz, low noise blocks at 11-12.5 GHz and
for other VHF, UHF and microwave applications.
Accu-F® is currently unique in its ability to offer very
low capacitance values (0.1pF) and very tight capacitance
tolerances (±0.05pF). Typically Accu-F® will be used in small
signal applications in VCO’s, matching networks, filters, etc.
Inspection test and quality control procedures in accordance
with ISO 9001, CECC, IECQ and USA MIL Standards yield
products of the highest quality.
APPLICATIONS
Cellular Communications
CT2/PCN (Cordless
Telephone/Personal Comm.
Networks)
Satellite TV
Cable TV
GPS (Global Positioning Systems)
Vehicle Location Systems
Vehicle Alarm Systems
Paging
Military Communications
Radar Systems
Video Switching
Test & Measurements
Filters
VCO’s
Matching Networks
APPROVALS
ISO 9001
ACCU-P® FEATURES
• Minimal batch to batch variability of parameters at high frequency.
• The Accu-P® has the same unique features as the Accu-F®
capacitor such as low ESR, high Q, availability of very low
capacitance values and very tight capacitance tolerances.
• The RF power handling capability of the Accu-P® allows for
its usage in both small signal and RF power applications.
• Inspection, test and quality control procedures in accordance with ISO 9001, CECC, IECQ and USA MIL Standards
guarantee product of the highest quality.
• Hand soldering Accu-P®: Due to their construction
utilizing relatively high thermal conductivity materials,
Accu-P’s have become the preferred device in R & D labs
and production environments where hand soldering is used.
Accu-P’s are available in all sizes and are electrically identical to their Accu-F counterparts.
APPLICATIONS
Cellular Communications
CT2/PCN (Cordless
Telephone/Personal Comm.
Networks)
Satellite TV
Cable TV
GPS (Global Positioning Systems)
Vehicle Location Systems
Vehicle Alarm Systems
Paging
Military Communications
Radar Systems
Video Switching
Test & Measurements
Filters
VCO's
Matching Networks
RF Amplifiers
APPROVALS
ISO 9001
7
1
Accu-F® */ Accu-P®
Thin-Film Chip Capacitors for
RF Signal and Power Applications
B1
W
T
B2
1
ACCU-P® (Signal and Power Type Capacitors)
L
0201
ACCU-F® *(Signal Type Capacitors)
L
W
T
B
0603
0805
1.60±0.1
(0.063±0.004)
0.81±0.1
(0.032±0.004)
0.63±0.1
(0.025±0.004)
0.30±0.1
(0.012±0.004)
2.01±0.1
(0.079±0.004)
1.27±0.1
(0.050±0.004)
0.63±0.1
(0.025±0.004)
0.30±0.1
(0.012±0.004)
recommended for new designs.
*Not
Accu-P’s are recommended.
0.60±0.05
L (0.023±0.002)
0.325±0.050
W (0.0128±0.002)
0.225±0.050
T (0.009±0.002)
0.10±0.10
B1 (0.004±0.004)
0.15±0.05
B2 (0.006±0.002)
DIMENSIONS:
millimeters (inches)
0402*
0603*
0805*
1210
1.00±0.1
(0.039±0.004)
0.55±0.07
(0.022±0.003)
0.40±0.1
(0.016±0.004)
0.00 +0.1
-0.0
(0.000+0.004
-0.000 )
0.20±0.1
(0.008±0.004)
1.60±0.1
(0.063±0.004)
0.81±0.1
(0.032±0.004)
0.63±0.1
(0.025±0.004)
0.35±0.15
(0.014±0.006)
0.35±0.15
(0.014±0.006)
2.01±0.1
(0.079±0.004)
1.27±0.1
(0.050±0.004)
0.93±0.2
(0.036±0.008)
0.30±0.1
(0.012±0.004)
0.30±0.1
(0.012±0.004)
3.02±0.1
(0.119±0.004)
2.5±0.1
(0.100±0.004)
0.93±0.2
(0.036±0.008)
0.43±0.1
(0.017±0.004)
0.43±0.1
(0.017±0.004)
DIMENSIONS: millimeters (inches)
*Mount Black Side Up
HOW TO ORDER
0402
3
J
4R7
A
B
S
TR
Size
Voltage
1 = 100V
5 = 50V
3 = 25V
Y = 16V
Z = 10V
Temperature
Coefficient (1)
Capacitance
0201*
0402*
0603
0805
1210*
Tolerance
for
C≤2.0pF*
Specification
Code
Termination
Code
Packaging
Code
* Accu-P ONLY
(1)
Capacitance
J = 0±30ppm/°C expressed in pF.
(-55°C to
(2 significant
+125°C)
digits + number
K = 0±60ppm/°C
of zeros)
(-55°C to
for values
+125°C)
<10pF,
letter R denotes
decimal point.
Example:
68pF = 680
8.2pF = 8R2
TC’s shown are per EIA/IEC Specifications.
P = ±0.02pF
Q = ±0.03pF
A = ±0.05pF
B = ±0.1pF
C = ±0.25pF
for
C≤3.0pF
Q = ±0.03pF
A = ±0.05pF
B = ±0.1pF
C = ±0.25pF
for
C≤5.6pF
A = ±0.05pF
B = ±0.1pF
C = ±0.25pF
A = Accu-F®
technology
B = Accu-P®
technology
W = Nickel/
TR = Tape and Reel
Solder Coated
Accu-F® Sn63, Pb37
Accu-P® 0402 Sn90, Pb10
T = Nickel/High Temperature
Solder Coated
Accu-P® 0603, 0805**,
1210**
Sn96, Ag4
**S = Nickel/Lead Free
Solder Coated
Accu-P® 0201, 0402,
0603
Sn100
**RoHS Compliant
for
5.6pF<C<10pF
RoHS COMPLIANT
Pb: Free
Please select correct
termination style
B = ±0.1pF
C = ±0.25pF
D = ±0.5pF
for
C≥10pF
F = ±1%
G = ±2%
J = ±5%
Engineering Kits Available
see pages 90-91
* Tolerances as tight as ±0.01pF are available. Please consult the factory.
ELECTRICAL SPECIFICATIONS
Operating and Storage Temperature Range
Temperature Coefficients (1)
Capacitance Measurement
Insulation Resistance (IR)
Proof Voltage
Aging Characteristic
Dielectric Absorption
(1)
8
TC’s shown are per EIA/IEC Specifications.
-55°C to +125°C
0 ± 30ppm/°C dielectric code “J” / 0 ± 60ppm/°C dielectric code “K”
1 MHz, 1 Vrms
≥1011 Ohms (≥1010 Ohms for 0201 and 0402 size)
2.5 UR for 5 secs.
Zero
0.01%
Accu-F® *
Signal Type Capacitors
Accu-F® Capacitance Ranges (pF)
TEMP. COEFFICIENT CODE
“J” = 0±30ppm/°C
(-55°C to +125°C)(2)
Size
Size Code
Voltage
100
0603
50
25
100
TEMP. COEFFICIENT CODE
“K” = 0±60ppm/°C
(-55°C to +125°)(2)
0805
50
25
Size
Size Code
Voltage
Cap in
Cap
Cap in
Cap
pF(1)
code
pF((1)
code
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
—
—
—
—
—
—
—
—
—
0R1
0R2
0R3
0R4
0R5
0R6
0R7
0R8
0R9
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
—
—
—
—
—
—
—
—
—
0R1
0R2
0R3
0R4
0R5
0R6
0R7
0R8
0R9
1.0
1.2
1.5
—
—
—
1R0
1R2
1R5
1.0
1.2
1.5
—
—
—
1R0
1R2
1R5
1.8
2.2
2.7
—
—
—
1R8
2R2
2R7
1.8
2.2
2.7
—
—
—
1R8
2R2
2R7
3.3
3.9
4.7
—
—
—
3R3
3R9
4R7
3.3
3.9
4.7
—
—
—
3R3
3R9
4R7
5.6
6.8
8.2
—
—
—
5R6
6R8
8R2
5.6
6.8
8.2
—
—
—
5R6
6R8
8R2
10
12
15
—
—
—
100
120
150
10
12
15
—
—
—
100
120
150
18
22
27
—
—
—
180
220
270
18
22
27
—
—
—
180
220
270
33
39
47
—
—
—
330
390
470
33
39
47
—
—
—
330
390
470
56
68
82
—
—
—
560
680
820
56
68
82
—
—
—
560
680
820
100
120
150
—
—
—
101
121
151
100
120
150
—
—
—
101
121
151
(1)
For capacitance values higher than listed in table,
please consult factory.
(1)
(2)
TC shown is per EIA/IEC Specifications.
(2)
1
100
0603
50
25
100
0805
50
25
For capacitance values higher than listed in table,
please consult factory.
TC shown is per EIA/IEC Specifications.
Intermediate values are available within the indicated range.
recommended for new designs.
*Not
Accu-P’s are recommended.
9
Accu-P®
Signal and Power Type Capacitors
Accu-P® Capacitance Ranges (pF)
1
TEMP. COEFFICIENT CODE
TEMP. COEFFICIENT CODE
“J” = 0±30ppm/°C (-55°C to +125°C)(2)
“K” = 0±60ppm/°C (-55°C to +125°C)(2)
Size
Size Code
Voltage
Cap in
pF(1)
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
4.2
4.3
4.4
4.5
4.6
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
22.0
24.0
27.0
30.0
33.0
39.0
47.0
56.0
68.0
(1)
0201
25 16 10
0402
25 16 10
Cap in
pF(1)
Cap
code
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Size
Size Code
Voltage
0603
0805
1210
50 25 100 50 25 100 50
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
4.2
4.3
4.4
4.5
4.6
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
22.0
24.0
27.0
30.0
33.0
39.0
47.0
56.0
68.0
0R1
0R2
0R3
0R4
0R5
0R6
0R7
0R8
0R9
1R0
1R1
1R2
1R3
1R4
1R5
1R6
1R7
1R8
1R9
2R0
2R1
2R2
2R3
2R4
2R5
2R6
2R7
2R8
2R9
3R0
3R1
3R2
3R3
3R4
3R5
3R6
3R7
3R8
3R9
4R0
4R1
4R2
4R3
4R4
4R5
4R6
4R7
5R1
5R6
6R2
6R8
7R5
8R2
9R1
100
110
120
130
140
150
160
170
180
220
240
270
300
330
390
470
560
680
For capacitance values higher than listed in table,
please consult factory.
(2) TC shown is per EIA/IEC Specifications.
These values are produced with “K” temperature coefficient
code only.
100
25
1210
100
50(3)
Cap
code
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
0R1
0R2
0R3
0R4
0R5
0R6
0R7
0R8
0R9
1R0
1R1
1R2
1R3
1R4
1R5
1R6
1R7
1R8
1R9
2R0
2R1
2R2
2R3
2R4
2R5
2R6
2R7
2R8
2R9
3R0
3R1
3R2
3R3
3R4
3R5
3R6
3R7
3R8
3R9
4R0
4R1
4R2
4R3
4R4
4R5
4R6
4R7
5R1
5R6
6R2
6R8
7R5
8R2
9R1
100
110
120
130
140
150
160
170
180
220
240
270
300
330
390
470
560
680
(1)
For capacitance values higher than listed in table,
please consult factory.
(2) TC shown is per EIA/IEC Specifications.
(3) For 50 volt range, please consult factory.
Intermediate values are available within the indicated range.
10
0805
50
Accu-P®
0201 Typical Electrical Tables
Self
Capacitance Resonance
@ 1 MHz
Frequency
250MHz
500MHz
750MHz
1000MHz
1250MHz
(pF)
(GHz)
Typical
Typ.
C(eff)
(pF)
0.8
9.1
0.84
2154
360
0.84
630
603
0.85
424
594
0.85
327
577
0.86
255
588
1.2
7.6
1.21
1375
405
1.21
525
517
1.22
341
527
1.23
267
503
1.23
208
515
1.8
6.3
1.84
1298
271
1.85
520
341
1.86
337
347
1.87
270
326
1.88
201
347
2.2
5.7
2.23
1355
214
2.24
512
281
2.25
335
284
2.27
264
270
2.29
199
284
3.3
4.6
3.29
1295
156
3.31
430
230
3.33
285
230
3.36
220
223
3.40
159
242
3.9
4.3
3.91
1902
93
3.93
460
181
3.97
298
185
4.02
227
181
4.08
163
198
4.7
3.9
4.71
1677
84
4.74
391
174
4.80
252
178
4.87
181
183
4.97
130
200
5.6
3.6
5.62
1391
84
5.67
370
154
5.74
257
148
5.83
195
144
5.95
140
157
6.8
3.3
6.77
1135
84
6.83
314
149
6.91
217
142
7.03
164
139
7.18
118
151
Self
Capacitance Resonance
@ 1 MHz
Frequency
Typ.
Q
Typ.
ESR
(ᒊΩ)
Typ.
C(eff)
(pF)
Typ.
Q
Typ.
ESR
(ᒊΩ)
Typ.
C(eff)
(pF)
Typ.
Q
Typ.
ESR
(ᒊΩ)
Typ.
C(eff)
(pF)
Typ.
Q
Typ.
ESR
(ᒊΩ)
Typ.
C(eff)
(pF)
Typ.
Q
Typ.
ESR
(ᒊΩ)
1500MHz
1750MHz
2250MHz
2500MHz
2750MHz
(pF)
(GHz)
Typical
Typ.
C(eff)
(pF)
Typ.
Q
Typ.
ESR
(ᒊΩ)
Typ.
C(eff)
(pF)
Typ.
Q
Typ.
ESR
(ᒊΩ)
Typ.
C(eff)
(pF)
Typ.
Q
Typ.
ESR
(ᒊΩ)
Typ.
C(eff)
(pF)
Typ.
Q
M
Typ.
ESR
(ᒊΩ)
Typ.
C(eff)
(pF)
Typ.
Q
Typ.
ESR
(ᒊΩ)
0.8
9.1
0.86
204
611
0.87
168
631
0.88
141
587
0.89
126
571
0.90
122
532
1.2
7.6
1.24
155
565
1.26
129
577
1.28
92
570
1.30
89
566
1.31
81
558
1.8
6.3
1.90
148
388
1.92
123
395
1.96
96
395
1.99
83
396
2.02
74
397
2.2
5.7
2.32
145
320
2.34
123
322
2.41
93
329
2.46
81
328
2.50
72
330
3.3
4.6
3.45
119
266
3.50
101
263
3.63
74
277
3.73
64
276
3.84
55
281
3.9
4.3
4.16
122
216
4.25
103
214
4.46
75
224
4.63
64
223
4.79
56
225
4.7
3.9
5.08
99
213
5.23
83
212
5.55
60
221
5.83
50
222
6.10
43
224
5.6
3.6
6.11
108
166
6.31
91
164
6.76
64
174
7.16
53
175
7.56
45
141
6.8
3.3
7.38
93
155
7.63
76
158
8.22
54
166
8.74
44
169
9.29
37
173
11
1
Accu-P®
0402 Typical Electrical Tables
Capacitance
Self
& Tolerance* Resonance Ref
@ 1 MHz
Frequency Freq
1
(pF)
(GHz)
Typical
0.1±0.05
0.2±0.05
0.3±0.05
0.4±0.05
0.5±0.05
0.6±0.05
0.7±0.05
0.8±0.05
0.9±0.05
1.00±0.05
1.10±0.05
1.20±0.05
1.30±0.05
1.40±0.05
1.50±0.05
1.60±0.05
1.70±0.05
1.80±0.05
1.90±0.05
2.00±0.05
2.10±0.05
2.20±0.05
2.30±0.05
2.40±0.05
2.50±0.05
2.60±0.05
2.70±0.05
2.80±0.05
2.90±0.05
3.00±0.05
3.10±0.05
3.20±0.05
3.30±0.05
3.40±0.05
3.50±0.05
3.60±0.05
3.70±0.05
3.80±0.05
3.90±0.05
4.00±0.05
4.10±0.05
4.20±0.05
4.30±0.05
4.40±0.05
4.50±0.05
4.60±0.05
4.70±0.05
5.10±0.05
5.60±0.05
6.2±0.1
6.8±0.1
7.5±0.1
8.2±0.1
9.1±0.1
10.0±1%
11.0±1%
12.0±1%
13.0±1%
14.0±1%
15.0±1%
16.0±1%
17.0±1%
18.0±1%
19.0±1%
20.0±1%
22.0±1%
19.4
16.4
14.6
12.5
11.3
10.4
9.5
9.1
8.8
8
7.8
7.4
7
6.8
6.5
6.5
6.4
6.2
6
5.7
5.4
5.1
5
4.9
4.7
4.6
4.5
4.5
4.4
4.4
4.4
4.3
4.3
4.3
4.2
4.2
4.1
4
3.9
3.9
3.8
3.8
3.7
3.7
3.6
3.6
3.5
3.4
3.3
3
2.8
2.7
2.6
2.5
2.4
2.3
2.2
2.2
2.1
2.1
2
1.9
1.8
1.8
1.8
1.75
Typ.
C(eff)
(MHz) (pF)
Typ.
Q
Typ. Ref Typ.
ESR Freq C(eff)
(Ω) (MHz) (pF)
Typ.
Q
Typ. Ref Typ.
ESR Freq C(eff)
(Ω) (MHz) (pF)
Typ.
Q
Typ. Ref Typ. Typ.
ESR Freq C(eff) Q
(Ω) (MHz) (pF)
Typ. Ref Typ.
ESR Freq C(eff)
(Ω) (MHz) (pF)
Typ.
Q
Typ.
ESR
(Ω)
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
247
246
245
244
243
242
242
241
240
239
239
238
237
237
236
235
234
233
233
232
231
230
230
229
228
227
226
226
225
224
224
223
223
222
222
221
221
220
217
214
211
208
205
202
199
196
193
189
186
184
182
179
178
176.5
175
173
170.04
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
1635
1581
1538
1502
1476
1454
1448
1444
1430
1421
1410
1406
1406
1405
1404
1404
1402
1399
1395
1395
1392
1392
1391
1391
1390
1389
1382
1381
1380
1379
1372
1370
1356
1355
1351
1350
1347
1343
1310
1297
1244
1202
1155
1116
1059
936
912
889
984
802
791
780
765
754
680
520
497.5
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.34
0.32
0.30
0.29
0.28
0.28
0.27
0.27
0.26
0.25
0.24
0.23
0.22
0.20
0.19
0.18
0.16
0.15
0.15
0.15
0.14
0.14
0.14
0.14
0.14
0.13
0.13
0.13
0.13
0.13
0.12
0.12
0.12
0.12
0.11
0.11
0.11
0.11
0.11
0.11
0.10
0.09
0.08
0.08
0.09
0.09
0.08
0.08
0.07
0.08
0.07
0.07
0.07
0.07
0.08
0.08
0.09
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
1283
1219
1153
1109
1061
1002
986
970
931
897
896
893
893
870
845
821
799
778
769
751
746
733
725
711
705
693
688
667
658
649
650
655
658
657
660
665
670
673
589
576
585
591
567
542
458
385
363
348
363
298
283
270
263
258
241
195
174
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.22
0.21
0.21
0.21
0.20
0.20
0.20
0.19
0.19
0.19
0.18
0.17
0.16
0.16
0.16
0.16
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.14
0.14
0.14
0.14
0.14
0.13
0.13
0.13
0.13
0.12
0.12
0.12
0.12
0.11
0.11
0.11
0.11
0.10
0.09
0.09
0.08
0.09
0.10
0.09
0.09
0.08
0.09
0.08
0.08
0.08
0.07
0.07
0.06
0.54
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
870
791
727
701
680
638
622
612
597
583
582
581
581
549
501
486
477
464
458
450
440
429
421
415
407
402
395
389
386
384
381
380
379
373
369
364
359
351
348
342
339
334
320
306
249
202
185
173
183
149
138
129
130
130
115
112
85.5
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.22
0.22
0.22
0.21
0.21
0.21
0.21
0.20
0.20
0.20
0.19
0.18
0.17
0.17
0.17
0.17
0.17
0.17
0.16
0.16
0.16
0.16
0.16
0.16
0.15
0.15
0.15
0.15
0.15
0.15
0.14
0.14
0.14
0.14
0.14
0.13
0.13
0.13
0.13
0.12
0.11
0.10
0.10
0.09
0.10
0.11
0.11
0.11
0.09
0.12
0.10
0.11
0.11
0.10
0.11
0.11
0.12
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.23
0.24
0.25
0.24
0.23
0.23
0.23
0.22
0.22
0.21
0.20
0.19
0.18
0.18
0.19
0.19
0.19
0.19
0.18
0.18
0.18
0.18
0.17
0.17
0.17
0.16
0.16
0.16
0.16
0.16
0.16
0.15
0.15
0.15
0.14
0.14
0.14
0.14
0.14
0.14
0.12
0.11
0.10
0.10
0.11
0.13
0.12
0.13
0.11
0.14
0.16
0.13
0.12
0.11
0.11
0.12
0.13
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
474
425
372
350
333
316
309
305
299
294
293
291
289
262
253
240
231
224
220
218
212
207
203
198
195
191
186
181
177
172
170
169
167
168
162
161
161
159
131
129
128
127
120
118
88
70
61
52
47
40
44
28
28
29
24
19
15
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.25
0.25
0.25
0.25
0.25
0.25
0.24
0.23
0.23
0.22
0.21
0.20
0.19
0.20
0.20
0.20
0.20
0.20
0.20
0.19
0.19
0.19
0.19
0.19
0.19
0.18
0.18
0.18
0.18
0.18
0.18
0.17
0.17
0.17
0.16
0.16
0.16
0.16
0.16
0.16
0.15
0.14
0.13
0.13
0.13
0.12
0.12
0.12
0.12
0.15
0.13
0.14
0.14
0.14
0.14
0.14
0.14
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
1.16
1.25
1.34
1.42
1.53
1.63
1.71
1.85
1.93
2.01
2.11
2.21
2.28
2.32
2.45
2.49
2.6
2.84
2.85
2.87
2.88
2.9
2.91
2.92
2.93
2.95
2.97
2.99
4
4.01
4.09
4.18
4.27
4.36
4.44
4.53
4.62
4.75
5.19
5.74
6.31
6.92
7.57
8.35
9.23
10.14
11.19
12.16
13.3
14.26
15.34
16.3
17.6
18.13
19.2
20.32
22.42
* Other tolerances are available, see page 8
12
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
494 1.15
492 1.22
491 1.33
490 1.42
488 1.54
486 1.63
485 1.76
483 1.81
482 1.86
481 1.93
480 2.06
478 2.14
476 2.27
475 2.36
473 2.48
472 2.6
470 2.71
469 2.83
468 2.94
467 3.11
466 3.39
465 3.45
464 3.61
462 3.72
461 3.78
460 3.82
459 3.87
458 3.93
458
4
457 4.01
457 4.07
456 4.18
455 4.27
454 4.34
453 4.45
452 4.52
451 4.62
450 4.74
447 5.16
443 5.75
440 6.09
436 6.94
433 7.51
430 8.36
428 9.28
424 10.24
421 11.17
418 12.3
416 13.32
414 14.44
413 15.46
410 16.4
410 17.7
409 18.42
407 19.4
405 20.43
404 23.105
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
742
740
738
736
733
731
729
728
727
726
722
720
718
716
715
714
712
711
710
710
709
708
707
707
706
705
704
702
699
697
696
696
695
694
693
692
691
690
687
684
681
678
675
673
670
668
666
664
661
660
660
657
657
657
655
655
654
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
1.13
1.21
1.31
1.4
1.52
1.58
1.69
1.75
1.83
1.91
2.11
2.21
2.26
2.4
2.51
2.62
2.73
2.82
2.9
2.99
3.11
3.22
3.3
3.42
3.53
3.6
3.7
3.81
3.9
4.02
4.11
4.2
4.29
4.43
4.5
4.6
4.72
4.74
5.23
5.81
6.33
7.04
7.85
8.48
9.87
10.55
11.81
12.77
14.1
15.03
16.16
17.6
18.2
19.51
20.51
22.1
25
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
991
989
986
983
980
978
986
985
983
972
969
966
964
962
960
959
958
956
954
953
952
951
950
949
948
947
946
945
944
943
942
941
940
939
939
938
938
937
934
932
928
926
924
922
920
919
917
915
912
913
912
909
909
910
908
908
907
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
1.12
1.19
1.3
1.35
1.49
1.6
1.71
1.75
1.8
1.91
2.01
2.1
2.27
2.3
2.41
2.52
2.65
2.86
2.91
3.15
3.41
3.48
3.68
3.8
3.79
3.85
3.89
3.95
4.02
4.11
4.18
4.23
4.37
4.58
4.62
4.7
4.79
4.86
5.53
6.01
6.68
7.39
8.17
8.93
10.2
11.49
12.87
14.16
15.8
16.72
18.51
20.2
21.3
22.7
24.5
26.5
30.95
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
620
561
503
480
461
438
429
422
413
401
400
398
396
379
358
349
331
313
308
303
299
291
285
282
276
273
270
262
256
251
250
248
247
246
246
245
244
244
230
201
202
203
191
186
152
118
103
95
101
76.7
82
68
70
75.5
62
57
44
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
1240
1238
1234
1230
1229
1226
1224
1223
1220
1219
1215
1213
1212
1209
1208
1205
1204
1203
1202
1201
1201
1199
1198
1197
1196
1195
1194
1193
1192
1191
1190
1190
1199
1195
1192
1190
1188
1186
1184
1182
1180
1177
1176
1174
1172
1171
1170
1168
1164
1167
1166
1161
1163
1164
1163
1162
1161
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
1.14
1.21
1.33
1.41
1.53
1.65
1.77
1.86
1.91
1.97
2.11
2.22
2.35
2.4
2.53
2.7
2.85
3
3.12
3.24
3.33
3.45
3.58
3.61
3.78
3.91
4
4.1
4.23
4.37
4.46
4.52
4.66
4.75
4.82
4.96
5.07
5.18
5.82
6.62
7.34
8.22
9.01
10.04
11.98
13.75
15.3
17.63
23.9
23.1
23.6
34.7
34.9
35.2
37.5
39.1
100.5
Accu-P®
0402 Typical Electrical Tables
Capacitance
Self
& Tolerance* Resonance Ref
@ 1 MHz
Frequency Freq
(pF)
(GHz)
Typical
0.1±0.05
0.2±0.05
0.3±0.05
0.4±0.05
0.5±0.05
0.6±0.05
0.7±0.05
0.8±0.05
0.9±0.05
1.00±0.05
1.10±0.05
1.20±0.05
1.30±0.05
1.40±0.05
1.50±0.05
1.60±0.05
1.70±0.05
1.80±0.05
1.90±0.05
2.00±0.05
2.10±0.05
2.20±0.05
2.30±0.05
2.40±0.05
2.50±0.05
2.60±0.05
2.70±0.05
2.80±0.05
2.90±0.05
3.00±0.05
3.10±0.05
3.20±0.05
3.30±0.05
3.40±0.05
3.50±0.05
3.60±0.05
3.70±0.05
3.80±0.05
3.90±0.05
4.00±0.05
4.10±0.05
4.20±0.05
4.30±0.05
4.40±0.05
4.50±0.05
4.60±0.05
4.70±0.05
5.10±0.05
5.60±0.05
6.2±0.1
6.8±0.1
7.5±0.1
8.2±0.1
9.1±0.1
10.0±1%
11.0±1%
12.0±1%
13.0±1%
14.0±1%
15.0±1%
16.0±1%
17.0±1%
18.0±1%
19.0±1%
20.0±1%
22.0±1%
19.4
16.4
14.6
12.5
11.3
10.4
9.5
9.1
8.8
8
7.8
7.4
7
6.8
6.5
6.5
6.4
6.2
6
5.7
5.4
5.1
5
4.9
4.7
4.6
4.5
4.5
4.4
4.4
4.4
4.3
4.3
4.3
4.2
4.2
4.1
4
3.9
3.9
3.8
3.8
3.7
3.7
3.6
3.6
3.5
3.4
3.3
3
2.8
2.7
2.6
2.5
2.4
2.3
2.2
2.2
2.1
2.1
2
1.9
1.8
1.8
1.8
1.75
Typ.
C(eff)
(MHz) (pF)
Typ.
Q
Typ. Ref Typ. Typ.
ESR Freq C(eff) Q
(Ω) (MHz) (pF)
Typ. Ref Typ. Typ.
ESR Freq C(eff) Q
(Ω) (MHz) (pF)
Typ. Ref Typ. Typ. Typ. Ref Typ.
ESR Freq C(eff) Q ESR Freq C(eff)
(Ω) (MHz) (pF)
(Ω) (MHz) (pF)
Typ.
Q
Typ.
ESR
(Ω)
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
1489
1485
1483
1479
1477
1474
1472
1470
1469
1468
1466
1463
1461
1460
1459
1458
1455
1453
1451
1450
1449
1448
1447
1446
1446
1445
1445
1444
1443
1442
1441
1440
1440
1439
1439
1438
1438
1437
1435
1434
1432
1430
1429
1428
1427
1425
1424
1423
1417
1422
1421
1416
1415
1411
1415
1415
1415.3
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
380
342
307
289
265
252
246
241
240
239
233
230
228
214
196
182
173
164
159
156
150
148
145
143
138
133
130
126
125
121
121
121
120
120
119
119
118
118
105
90
91
88
85
79
60
41
36
29
18
17
20
12
11
9
7
5
4
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.25 1739
0.25 1735
0.25 1732
0.25 1729
0.25 1726
0.25 1724
0.24 1722
0.23 1719
0.22 1718
0.22 1717
0.21 1716
0.20 1714
0.20 1711
0.20 1709
0.20 1708
0.20 1706
0.20 1705
0.20 1703
0.20 1702
0.19 1702
0.19 1701
0.19 1700
0.19 1700
0.19 1699
0.19 1698
0.19 1697
0.19 1697
0.19 1696
0.19 1696
0.19 1695
0.18 1694
0.18 1693
0.18 1692
0.18 1692
0.18 1691
0.18 1691
0.17 1691
0.17 1690
0.17 1689
0.17 1687
0.15 1686
0.13 1684
0.13 1683
0.13 1682
0.13 1681
0.14 1680
0.15 1679
0.15 1678
0.13 1671
0.15 1677
0.14 1676
0.14 1670
0.14 1670
0.15 1675
0.15 1673
0.15 1673
0.15 1670.5
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.25
0.25
0.25
0.25
0.25
0.25
0.24
0.23
0.22
0.21
0.21
0.21
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.19
0.19
0.19
0.19
0.19
0.18
0.18
0.18
0.18
0.18
0.18
0.18
0.17
0.15
0.13
0.14
0.13
0.14
0.16
0.15
0.14
0.17
0.21
0.17
0.17
0.17
0.17
0.16
0.16
0.15
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.24
0.24
0.24
0.24
0.24
0.24
0.23
0.22
0.21
0.21
0.20
0.20
0.20
0.19
0.19
0.19
0.19
0.20
0.20
0.20
0.20
0.20
0.19
0.20
0.20
0.19
0.20
0.20
0.20
0.21
0.20
0.19
0.18
0.18
0.18
0.19
0.17
0.17
0.19
0.21
0.18
0.14
0.13
0.13
0.15
0.17
0.17
0.18
0.18
0.19
0.16
0.16
0.16
0.16
0.16
0.16
0.16
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
200
177
149
137
125
115
119
120
122
123
118
115
108
99
91
81
72
66
65
63
61
59
58
55
52
51
51
49
48
47
48
49
49
50
52
52
54
54
39
28
33
36
33
31
15
8
6
4
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.23
0.25
0.27
0.27
0.26
0.27
0.25
0.24
0.22
0.21
0.21
0.20
0.20
0.22
0.23
0.23
0.24
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.24
0.24
0.24
0.24
0.24
0.24
0.23
0.23
0.21
0.20
0.20
0.19
0.19
0.19
0.21
0.23
0.19
0.14
0.14
0.14
0.16
0.18
0.18
0.19
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
1.18
1.29
1.37
1.45
1.6
1.72
1.81
1.92
1.98
2.06
2.12
2.31
2.47
2.51
2.6
2.77
2.85
3.18
3.25
3.33
3.49
3.61
3.7
3.79
4.01
4.11
4.2
4.28
4.44
4.72
4.8
4.92
5.01
5.17
5.28
5.41
5.49
5.6
6.59
7.43
8.27
9.41
10.05
11.64
13.39
17.6
20.09
24.14
48.3
39.55
38.93
79.3
77.6
83.13
79.6
78.5
78.8
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
1.25
1.33
1.45
1.58
1.71
1.82
1.91
1.99
2.06
2.19
2.22
2.43
2.65
2.81
3
3.12
3.25
3.47
3.62
3.77
3.99
4.16
4.31
4.47
4.62
4.78
4.91
5.05
5.11
5.26
5.38
5.5
5.63
5.78
5.91
6.04
6.11
6.23
7.48
8.75
10.21
11.43
12.25
14.43
19.07
26.51
32.66
43.51
63.2
122
154
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
314
275
251
240
221
203
201
199
198
197
190
185
183
168
151
144
132
122
120
117
114
109
105
101
101
95
94
92
90
89
88
87
87
85
85
81
80
80
75
61
60
58
56
52
33
21
19
13
5
2
2
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
1988
1986
1982
1980
1977
1974
1971
1970
1969
1968
1968
1966
1964
1963
1962
1960
1957
1956
1956
1956
1955
1952
1952
1951
1950
1950
1949
1949
1948
1948
1947
1947
1946
1946
1945
1945
1944
1944
1943
1942
1941
1940
1939
1938
1937
1936
1935
1934
1934
1934
1933
1932
1932
1932
1932
1930
1927.5
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
1.32
1.41
1.54
1.66
1.78
1.94
2.01
2.1
2.24
2.33
2.51
2.62
2.83
2.98
3.16
3.32
3.51
3.75
3.93
4.02
4.21
4.4
4.62
4.76
4.92
5.18
5.34
5.5
5.61
5.77
5.81
5.93
6.05
6.11
6.23
6.45
6.66
6.72
7.97
10.03
11.52
13.36
15.06
16.85
28.35
40.16
66.25
92.97
125
180.3
244.5
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
265
232
208
196
179
169
168
167
166
165
160
155
149
132
120
112
97
94
88
84
81
79
77
76
75
73
71
69
67
66
66
65
65
64
64
64
63
63
60
51
48
45
40
38
25
11
8
5
3
1
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
2240
2238
2234
2230
2229
2227
2226
2225
2223
2222
2220
2219
2217
2216
2215
2214
2212
2211
2210
2210
2209
2209
2208
2207
2206
2206
2205
2205
2204
2204
2203
2203
2203
2202
2202
2201
2201
2200
2200
2199
2198
2196
2195
2195
2194
2194
2192
2192
2191
2191
2191
2191
2191
2182
2181
2180
2178
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
1.38
1.49
1.59
1.73
1.88
2.01
2.1
2.23
2.34
2.41
2.62
2.76
2.91
3.15
3.42
3.58
3.73
3.89
3.97
4.12
4.26
4.45
4.62
4.81
4.93
5.21
5.4
5.62
5.78
5.94
6.03
6.11
6.24
6.35
6.4
6.52
6.67
6.71
8.11
10.42
11.88
13.72
15.24
16.65
31.08
45.46
81.07
123.19
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
229
201
173
166
154
143
142
141
141
140
138
132
126
121
109
92
85
78
75
73
72
70
69
68
66
65
63
62
61
60
60
60
59
58
57
56
55
56
45
37
36
37
35
32
15
8
5
3
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
0.23
0.24
0.25
0.25
0.25
0.25
0.24
0.23
0.22
0.21
0.21
0.2
0.19
0.19
0.2
0.21
0.22
0.24
0.24
0.24
0.24
0.24
0.23
0.23
0.22
0.23
0.22
0.22
0.22
0.22
0.21
0.21
0.21
0.2
0.2
0.19
0.18
0.18
0.2
0.22
0.18
0.14
0.15
0.14
0.16
0.18
0.2
0.2
0.2
0.18
0.161
0.16
0.16
0.16
0.16
0.16
0.155
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
2493
2490
2488
2485
2483
2481
2479
2478
2477
2476
2475
2474
2473
2471
2469
2468
2467
2466
2466
2466
2465
2465
2464
2464
2464
2463
2463
2462
2462
2461
2461
2460
2460
2459
2459
2458
2458
2457
2456
2456
2455
2454
2454
2453
2452
2452
2451
2450
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
1.41
1.55
1.62
1.76
1.89
2.03
2.1
2.23
2.35
2.42
2.65
2.81
2.91
3.16
3.42
3.66
3.73
3.89
4.03
4.17
4.21
4.33
4.49
4.66
4.92
5.15
5.25
5.41
5.66
5.82
5.86
5.9
5.95
6.01
6.12
6.23
6.29
6.35
8.1
10.07
11.02
12.85
13.66
15.32
29.91
39.54
61.28
82.44
* Other tolerances are available, see page 8
13
1
Accu-F® / Accu-P®
0603 Typical Electrical Tables
Capacitance
& Tolerance*
@ 1 MHz
(pF)
0.1±0.05
0.2±0.05
0.3±0.05
0.4±0.05
0.5±0.05
0.6±0.10
0.7±0.10
0.8±0.10
0.9±0.10
1.0±0.10
1.1±0.10
1.2±0.10
1.3±0.10
1.4±0.10
1.5±0.10
1.6±0.10
1.7±0.10
1.8±0.10
1.9±0.10
2.0±0.10
2.1±0.10
2.2±0.10
2.4±0.25
2.7±0.25
3.0±0.25
3.3±0.25
3.6±0.25
3.9±0.25
4.3±0.25
4.7±0.25
5.1±0.25
5.6±0.25
6.2±0.25
6.8±0.25
7.5±0.50
8.2±0.50
9.1±0.50
10±5%
11±5%
12±5%
13±5%
14±5%
15±5%
16±5%
18±5%
22±5%
24±5%
27±5%
30±5%
33±5%
1
Self
Ref
Resonance Freq.
Frequency MHz
(GHz)
18.0
12.7
10.4
9.0
8.1
7.4
6.8
6.4
6.0
5.7
5.4
5.2
5.0
4.8
4.7
4.5
4.4
4.2
4.1
4.0
3.9
3.8
3.7
3.5
3.3
3.1
3.0
2.9
2.7
2.6
2.5
2.4
2.3
2.2
2.1
2.0
1.9
1.8
1.7
1.6
1.6
1.5
1.5
1.4
1.3
1.2
1.2
1.1
1.0
1.0
245
244
243
242
241
241
240
240
239
239
238
237
236
234
232
230
226
224
223
220
218
216
214
211
208
205
202
200
195
191
189
187
185
182
179
176
170
168
165
163
160
Effective
Capacitance
Max/Min
(pF)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1.15/0.90
1.25/1.00
1.35/1.10
1.45/1.15
1.55/1.25
1.65/1.35
1.75/1.45
1.85/1.55
2.10/1.70
2.15/1.78
2.11/1.80
2.25/1.95
2.40/2.05
2.70/2.15
3.00/2.45
3.40/2.75
3.60/3.05
3.90/3.30
4.20/3.65
4.60/4.00
5.00/4.45
5.40/4.85
5.90/5.35
6.50/5.95
7.20/6.55
8.10/7.00
8.80/7.70
9.80/8.60
10.70/9.50
11.60/10.90
12.90/11.40
13.10/12.90
14.90/13.25
15.90/14.25
17.00/15.15
19.50/17.00
24.00/20.90
26.00/22.80
29.00/25.60
32.00/28.50
37.65/31.35
* Other tolerances are available, see page 8
14
Max
ESR
(Ω)
Ref
Freq.
MHz
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
.280
.270
.260
.260
.250
.250
.240
.230
.220
.210
.205
.200
.190
.175
.160
.150
.130
.128
.125
.122
.120
.115
.110
.105
.100
.095
.090
.090
.085
.085
.085
.080
.080
.080
.070
.070
.066
.066
.065
.064
.064
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
491
490
487
486
485
484
483
482
479
478
477
475
474
471
468
465
459
456
455
451
448
445
443
439
435
432
429
425
422
420
418
416
414
412
410
408
404
403
402
401
400
Effective
Capacitance
Max/Min
(pF)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1.10/0.90
1.25/1.00
1.35/1.05
1.45/1.15
1.55/1.25
1.65/1.35
1.75/1.45
1.85/1.60
2.10/1.70
2.15/1.80
2.11/1.80
2.25/1.98
2.45/2.05
2.75/2.15
3.10/2.45
3.40/2.75
3.70/3.05
4.25/3.35
4.35/3.70
4.80/4.05
5.20/4.45
5.70/4.89
6.10/5.35
6.90/5.95
7.25/6.55
8.10/7.00
8.80/7.70
10.95/8.65
11.60/9.50
12.20/10.60
13.40/11.50
14.00/13.00
16.90/14.00
17.50/15.30
18.00/15.90
20.20/17.10
25.00/20.90
30.00/23.00
36.00/27.00
40.00/30.00
45.00/33.00
Max
ESR
(Ω)
Ref
Freq.
MHz
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
.220
.210
.200
.200
.190
.180
.180
.170
.160
.160
.155
.150
.145
.140
.125
.120
.120
.119
.115
.117
.110
.105
.100
.099
.099
.099
.098
.098
.097
.095
.095
.095
.090
.090
.085
.085
.080
.080
.080
.080
.080
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
738
736
734
732
731
729
727
725
723
721
720
718
717
713
709
706
699
697
695
692
689
686
684
680
677
675
672
670
667
665
663
661
660
659
657
656
654
653
652
651
650
Effective
Capacitance
Max/Min
(pF)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1.10/0.90
1.11/1.00
1.40/1.05
1.45/1.15
1.45/1.25
1.65/1.35
1.75/1.45
1.85/1.60
2.10/1.70
2.15/1.80
2.11/1.80
2.35/1.98
2.42/2.05
2.80/2.15
3.10/2.45
3.40/2.75
3.70/3.05
3.90/3.35
4.90/3.75
5.10/4.05
5.30/4.50
6.00/4.90
6.15/5.40
7.10/6.00
7.50/6.60
8.20/7.00
9.00/7.70
12.00/9.00
12.50/9.60
13.20/10.50
14.60/11.90
16.00/13.50
19.00/15.00
21.00/16.50
22.00/17.00
23.70/19.00
28.00/21.00
N/A
N/A
N/A
N/A
Max
ESR
(Ω)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
.220
.210
.210
.200
.200
.190
.190
.180
.170
.167
.165
.162
.160
.150
.145
.140
.130
.125
.120
.115
.115
.115
.110
.110
.110
.110
.110
.110
.110
.110
.110
.110
.110
.100
.100
.100
.10
.10
.10
.10
.10
Ref
Freq.
MHz
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
987
985
981
974
977
976
973
971
969
967
966
964
962
958
954
951
945
942
940
937
935
931
929
927
925
925
921
919
917
916
914
913
912
911
910
908
906
905
905
904
904
Effective
Capacitance
Max/Min
(pF)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1.15/0.90
1.25/1.00
1.35/1.05
1.45/1.15
1.55/1.25
1.70/1.35
1.80/1.50
1.90/1.60
2.15/1.70
2.20/1.80
2.25/1.90
2.35/2.00
2.45/2.10
2.80/2.15
3.15/2.48
3.60/2.80
3.80/3.10
4.10/3.40
5.15/3.75
5.30/4.05
5.50/4.55
6.20/5.00
6.50/5.50
8.00/6.10
9.00/6.65
9.50/7.05
10.00/7.80
13.00/9.10
16.00/9.90
17.00/10.00
18.00/12.00
21.00/14.00
26.00/15.00
29.00/17.00
30.00/18.00
33.00/21.00
39.00/21.50
N/A
N/A
N/A
N/A
Max
ESR
(Ω)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
.300
.290
.280
.270
.260
.250
.250
.250
.250
.240
.230
.220
.210
.200
.190
.170
.165
.160
.150
.150
.145
.140
.135
.130
.130
.125
.125
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
.120
Accu-F® / Accu-P®
0805 Typical Electrical Tables
Capacitance
& Tolerance*
@ 1 MHz
(pF)
0.1±0.05
0.2±0.05
0.3±0.05
0.4±0.05
0.5±0.05
0.6±0.10
0.7±0.10
0.8±0.10
0.9±0.10
1.0±0.10
1.1±0.10
1.2±0.10
1.3±0.10
1.4±0.10
1.5±0.10
1.6±0.10
1.7±0.10
1.8±0.10
1.9±0.10
2.0±0.10
2.1±0.10
2.2±0.10
2.4±0.25
2.7±0.25
3.0±0.25
3.3±0.25
3.6±0.25
3.9±0.25
4.3±0.25
4.7±0.25
5.1±0.25
5.6±0.25
6.2±0.25
6.8±0.25
7.5±0.05
8.2±0.05
9.1±0.05
10±5%
11±5%
12±5%
13±5%
14±5%
15±5%
16±5%
18±5%
20±5%
22±5%
24±5%
27±5%
30±5%
33±5%
36±5%
39±5%
43±5%
47±5%
Ref
Self
Resonance Freq.
Frequency MHz
(GHz)
5.6
5.4
5.1
4.9
4.8
4.6
4.5
4.3
4.2
4.1
4.0
3.9
3.8
3.6
3.4
3.3
3.1
3.0
2.9
2.7
2.6
2.5
2.4
2.3
2.2
2.1
2.0
1.9
1.8
1.8
1.6
1.6
1.5
1.5
1.4
1.3
1.3
1.2
1.2
1.1
1.0
1.0
0.9
0.9
0.9
0.8
250
248
245
243
242
242
241
240
239
239
238
237
236
235
233
231
229
228
227
223
220
218
215
212
208
206
203
199
196
193
190
187
184
182
179
176
173
171
168
165
163
159
157
155
153
152
Effective
Capacitance
Max/Min
(pF)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1.20/0.90
1.30/1.00
1.40/1.10
1.50/1.20
1.60/1.30
1.70/1.40
1.80/1.50
1.90/1.60
2.00/1.70
2.10/1.80
2.20/1.90
2.30/2.00
2.40/2.10
2.85/2.15
3.19/2.45
3.51/2.75
3.83/3.05
4.16/3.35
4.48/3.65
4.91/4.05
5.35/4.45
5.78/4.85
6.00/5.35
7.00/5.95
7.20/6.55
8.64/7.00
9.40/7.70
10.37/8.60
11.00/9.50
12.50/10.45
13.61/11.40
14.75/12.35
15.88/13.30
17.02/14.25
18.16/15.20
20.42/17.10
22.70/19.00
24.95/20.90
27.20/22.80
30.78/25.69
34.23/28.50
37.85/31.35
41.19/34.20
44.79/37.05
49.99/40.85
55.19/44.65
Max
ESR
(Ω)
Ref
Freq.
MHz
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
.320
.290
.270
.260
.240
.230
.220
.210
.200
.200
.190
.190
.180
.170
.160
.150
.140
.140
.130
.130
.120
.120
.100
.100
.100
.100
.090
.080
.080
.080
.070
.070
.070
.070
.070
.070
.060
.060
.060
.060
.050
.050
.050
.050
.050
.050
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
500
496
492
488
487
486
484
483
482
481
479
477
475
473
470
465
463
462
459
456
451
447
444
442
435
434
432
429
423
420
418
416
414
414
411
408
406
405
403
401
400
399
397
396
395
394
Effective
Capacitance
Max/Min
(pF)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1.20/0.90
1.30/1.00
1.40/1.10
1.50/1.20
1.60/1.20
1.70/1.40
1.85/1.50
1.95/1.60
2.05/1.70
2.15/1.80
2.30/1.90
2.40/2.00
2.60/2.10
3.13/2.29
3.47/2.55
3.76/2.86
4.04/3.10
4.35/3.42
4.67/3.72
5.11/4.13
5.52/4.53
5.94/4.94
6.82/5.40
7.52/6.00
8.21/6.88
9.02/7.10
9.83/7.90
10.88/8.76
11.92/9.76
13.23/10.50
14.50/11.90
15.80/13.00
17.22/14.00
18.56/15.19
19.90/16.28
22.69/18.57
25.38/20.78
28.08/21.00
31.31/25.61
36.10/32.20
40.58/33.20
46.65/35.00
52.22/38.00
59.08/47.08
70.50/53.04
81.99/59.00
Max
ESR
(Ω)
Ref
Freq.
MHz
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
.300
.270
.250
.230
.220
.210
.210
.200
.190
.190
.180
.170
.170
.170
.150
.140
.140
.130
.120
.120
.110
.110
.100
.100
.100
.100
.080
.080
.080
.080
.080
.080
.080
.080
.080
.070
.070
.070
.070
.070
.070
.070
.070
.070
.060
.060
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
750
754
739
734
733
731
729
728
726
724
722
720
716
714
711
707
704
704
701
697
691
688
684
683
677
675
673
670
668
665
663
662
661
660
659
657
656
655
654
652
651
650
649
648
647
646
Effective
Capacitance
Max/Min
(pF)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1.20/0.90
1.30/1.00
1.40/1.10
1.50/1.10
1.60/1.20
1.70/1.40
2.00/1.50
2.05/1.60
2.10/1.70
2.25/1.80
2.40/1.90
2.60/2.00
2.80/2.14
3.17/2.30
3.52/2.60
3.84/2.93
4.15/3.19
4.50/3.53
4.85/3.86
5.32/4.25
5.79/4.60
6.25/5.20
7.27/5.60
8.08/6.10
8.90/6.96
9.85/7.50
10.80/8.25
12.02/9.10
13.24/10.00
15.07/11.00
16.90/12.82
18.87/14.00
20.84/16.00
22.62/19.13
27.00/20.89
33.00/22.10
38.00/23.15
42.00/24.00
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Max
ESR
(Ω)
Ref
Freq.
MHz
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
.270
.250
.240
.230
.220
.220
.220
.210
.210
.200
.200
.190
.190
.190
.170
.160
.160
.150
.150
.150
.140
.140
.120
.120
.120
.120
.110
.110
.110
.110
.110
.110
.110
.110
.100
.100
.100
.100
.090
.090
.090
.090
.090
.090
.090
.090
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
999
993
987
980
979
977
975
974
972
970
967
964
962
960
957
952
948
947
944
940
936
934
930
927
925
924
922
920
918
916
915
914
913
912
911
910
908
907
907
906
905
904
903
902
901
900
Effective
Capacitance
Max/Min
(pF)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1.20/0.90
1.30/1.00
1.40/1.10
1.50/1.20
1.60/1.30
1.70/1.40
2.00/1.50
2.20/1.60
2.30/1.70
2.40/1.80
2.60/1.95
2.80/2.06
3.06/2.17
3.31/2.31
3.67/2.60
4.00/3.00
4.38/3.30
4.80/3.60
5.23/3.90
5.79/4.50
6.36/4.80
7.16/5.74
8.25/5.90
9.35/6.80
10.46/7.32
11.75/8.42
13.04/9.53
14.70/10.70
15.37/11.80
16.00/12.20
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Max
ESR
(Ω)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
.300
.290
.280
.270
.260
.260
.250
.240
.230
.230
.220
.210
.210
.210
.200
.190
.190
.190
.180
.180
.170
.160
.150
.150
.150
.150
.150
.150
.140
.140
.140
.140
.140
.130
.130
.130
.130
.130
.130
.130
.130
.120
.120
.120
.120
.110
* Other tolerances are available, see page 8
15
1
Accu-P®
1210 Typical Electrical Tables
Capacitance
& Tolerance*
@ 1 MHz
(pF)
1.0±0.25
1.2±0.25
1.5±0.25
1.8±0.25
2.2±0.25
2.7±0.25
3.3±0.25
3.6±0.25
3.9±0.25
4.3±0.25
4.7±0.25
5.1±0.25
5.6±0.25
6.2±0.25
6.8±0.25
7.5±0.25
8.2±0.25
9.1±0.25
10±5%
11±5%
12±5%
13±5%
14±5%
15±5%
16±5%
18±5%
20±5%
22±5%
24±5%
25±5%
27±5%
28±5%
30±5%
32±5%
33±5%
34±5%
36±5%
39±5%
43±5%
47±5%
1
Self
Ref
Resonance Freq.
Frequency (MHz)
(GHz)
4.98
4.55
4.07
9.71
9.96
2.70
2.60
2.50
2.40
2.30
2.20
2.10
2.00
1.90
1.80
1.70
1.70
1.60
1.50
1.50
1.40
1.30
1.30
1.20
1.20
1.10
1.10
1.00
0.98
0.96
0.92
0.91
0.88
0.85
0.84
0.82
0.80
0.77
0.73
0.70
247
245
242
240
237
233
229
228
227
223
220
218
215
212
208
206
203
199
196
193
190
185
183
182
180
176
173
171
168
166
164
163
162
161
159
158
157
155
153
152
Effective
Capacitance
Max/Min
(pF)
1.23/0.75
1.32/0.95
1.6/1.23
2.1/1.55
2.48/1.95
3.42/2.45
4.02/3.05
4.18/3.35
4.53/3.65
5.01/4.05
5.48/4.45
5.88/4.85
6.49/5.35
7.19/5.95
7.38/6.55
8.60/7.90
9.36/7.70
10.34/8.60
11.33/9.50
12.50/10.45
13.61/11.40
14.75/12.35
15.89/13.30
17.02/14.25
18.16/15.20
20.42/17.10
22.70/19.00
24.95/20.90
27.20/22.60
26.39/23.75
30.78/25.65
31.93/26.50
34.23/28.50
36.51/30.40
37.65/31.35
38.83/32.30
41.20/34.20
44.79/37.05
49.99/40.85
55.69/44.65
* Other tolerances are available, see page 8
16
Max
ESR
(Ω)
Ref
Freq.
(MHz)
.350
.310
.250
.200
.170
.140
.140
.130
.130
.120
.120
.110
.110
.100
.100
.100
.100
.090
.090
.090
.080
.080
.080
.080
.080
.070
.070
.070
.070
.070
.070
.070
.070
.070
.060
.060
.060
.060
.060
.060
495
491
486
482
476
466
463
462
458
456
451
447
441
442
435
434
432
429
423
420
418
416
415
414
411
408
406
405
403
402
401
401
400
399
399
398
397
396
396
395
Effective
Capacitance
Max/Min
(pF)
1.34/0.86
1.45/1.00
1.75/1.3
2.21/1.56
2.68/2.00
3.49/2.55
4.09/3.15
4.32/3.43
4.66/3.73
5.11/4.14
5.62/4.50
6.04/4.90
6.72/5.56
7.26/6.07
8.16/6.42
8.90/7.25
9.76/7.96
10.87/8.88
11.97/9.79
13.23/10.83
14.59/11.90
15.64/13.00
17.22/14.00
18.56/15.19
19.90/16.28
22.69/18.57
25.36/20.78
28.06/22.96
31.31/25.60
32.91/26.00
36.10/28.00
37.60/30.76
40.50/33.20
44.63/34.50
46.65/35.00
48.51/37.00
52.22/41.00
59.00/43.00
70.00/46.00
81.00/53.00
Max
ESR
(Ω)
Ref
Freq.
(MHz)
.260
.240
.230
.200
.170
.140
.130
.130
.120
.110
.110
.110
.100
.100
.100
.100
.090
.090
.090
.090
.080
.080
.080
.080
.080
.080
.080
.080
.080
.080
.070
.070
.070
.070
.070
.070
.070
.070
.070
.070
745
739
731
731
727
708
704
704
701
697
691
683
681
679
677
675
673
670
668
665
663
662
661
660
659
657
656
655
654
653
652
651
651
650
650
649
649
649
648
648
Effective
Capacitance
Max/Min
(pF)
1.46/0.94
1.64/1.1
1.82/1.95
2.4/1.6
2.85/2.1
3.73/2.63
4.33/3.23
4.50/3.32
4.85/3.75
5.32/4.29
5.94/4.60
6.36/5.10
7.17/5.67
7.99/6.10
8.81/6.93
9.58/7.60
10.68/8.31
12.10/9.66
13.51/10.05
15.07/11.33
16.90/12.82
18.80/13.60
20.85/16.00
22.62/17.00
25.12/18.00
30.00/24.00
35.00/26.00
42.00/27.00
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Max
ESR
(Ω)
Ref
Freq.
(MHz)
.280
.260
.250
.200
.180
.150
.140
.140
.140
.130
.130
.130
.120
.110
.110
.100
.100
.090
.090
.090
.090
.090
.090
.090
.090
.080
.080
.080
.080
.080
.080
.080
.080
.080
.080
.080
.070
.070
.070
.070
995
987
978
978
969
952
948
947
944
940
936
933
928
927
925
924
922
920
918
916
915
914
913
912
911
909
908
908
907
907
906
906
905
905
905
904
904
904
904
903
Effective
Capacitance
Max/Min
(pF)
1.6/0.99
2.00/1.2
2.1/1.4
2.54/1.7
3.02/2.2
3.89/2.70
4.49/3.30
4.78/3.45
5.18/3.90
5.72/4.30
6.56/4.70
7.20/5.40
8.15/6.00
9.18/7.00
10.20/7.42
11.36/8.00
13.00/9.10
15.11/10.25
17.22/11.06
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Max
ESR
(Ω)
.350
.320
.270
.210
.200
.170
.160
.160
.150
.140
.140
.140
.140
.130
.130
.130
.130
.130
.130
.130
.120
.120
.120
.110
.110
.110
.110
.110
.110
.110
.110
.110
.110
.110
.110
.110
.110
.110
.110
.110
Accu-F® / Accu-P®
High Frequency Characteristics
Typical ESR vs. Frequency
Accu-P® 0201
1000
900
800
700
600
0.8pF
ESR (mΩ)
500
1
400
1.8pF
300
2.2pF
3.3pF
200
100
4.7pF
6.8pF
0
500
1000
1500
2000
2500
3000
Frequency (MHz)
Typical SRF vs. Capacitance
Accu-P® 0201
8
Capacitance (pF)
7
6
5
4
3
2
1
0
3
4
5
6
7
8
9
10
SRF (GHz)
Typical Q vs. Frequency
Accu-P® 0201
1000
Q
0.8pF
100
1.8pF
3.9pF
4.7pF
6.8pF
10
500
1000
1500
2000
2500
3000
Frequency (MHz)
17
Accu-F® / Accu-P®
High Frequency Characteristics
Typical ESR vs. Frequency
Accu-F®/Accu-P® 0603
Typical ESR vs. Frequency
Accu-P® 0402
1
0.25
1.0pF
0.2
ESR (Ohms)
Ohm
4.7pF
0.1
2.7pF
0.1 10pF
22pF
10pF
0.05
0
0
500
1000
1500
2000
2500
0.01
0
0.5
1
1.5
Measured on Boonton 34-A
(34-A limits measurements to 3GHz)
Frequency (MHz)
Measured on Boonton 34A
Typical Q vs. Frequency
Accu-P® 0402
Q (Logarithmic Scale)
2
2.5
3GHz
Typical Q vs. Frequency
Accu-F®/Accu-P® 0603
10000
10000
1000
1000
100
1 pF
2.2 pF
4.7 pF
10
10 pF
100
10pF
22pF
1
0
500
1000
2000
1500
Frequency (MHz)
2500
2.7pF
10
3000
0
0.5
1
1.5
2
Measured on Boonton 34-A
(34-A limits measurements to 3GHz)
2.5
3GHz
Typical Self Resonant Frequency vs. Capacitance
Accu-F®/Accu-P® 0603
Typical Self Resonant Frequency vs. Capacitance
Accu-P® 0402
GHz
10
8
SRF (GHz)
1
2.2pF
0.15
7
6
5
4
1
3
2
1
0
0
2
4
6
8
CAPACITANCE (pF)
Measured on Wiltron 360 Vector Analyzer
10
12
0.1
1
10
100
~ 0.78 nH
L (self inductance)
NOTE
L and SRF are obtained from the measured increase in
effective capacitance as the frequency is increased
Measured on the Boonton 34-A
18
pF
Accu-F® / Accu-P®
High Frequency Characteristics
Typical ESR vs. Frequency
Accu-F®/Accu-P® 0805
Typical ESR vs. Frequency
Accu-P® 1210
1
1
1pF
1pF
Ohm
Ohm
3.3pF
3.3pF
0.1
1
0.1
10pF
33pF
33pF
0.01
0.01
0
0.5
1
1.5
2
Measured on Boonton 34-A
(34-A limits measurements to 3GHz)
2.5
3GHz
0
0.5
1
1.5
2
Measured on Boonton 34-A
(34-A limits measurements to 3GHz)
2.5
3GHz
Typical Q vs. Frequency
Accu-P® 1210
Typical Q vs. Frequency
Accu-F®/Accu-P® 0805
10000
10000
1000
1000
100
100
1pF
1pF
3.3pF
10pF
10pF
33pF
3.3pF
33pF
10
10
0
0.5
1
1.5
2
Measured on Boonton 34-A
(34-A limits measurements to 3GHz)
2.5
3GHz
Typical Self Resonant Frequency vs. Capacitance
Accu-F®/Accu-P® 0805
0
0.5
1
1.5
2
Measured on Boonton 34-A
(34-A limits measurements to 3GHz)
2.5
3GHz
Typical Self Resonant Frequency vs. Capacitance
Accu-P® 1210
GHz
GHz
10
10
1
1
0.1
0.1
1
10
~
L (self inductance)
100
0.82 nH
pF
1
10
100
pF
~ 1.02 nH
L (self inductance)
NOTE
L and SRF are obtained from the measured increase in
effective capacitance as the frequency is increased
NOTE
L and SRF are obtained from the measured increase in
effective capacitance as the frequency is increased
Measured on the Boonton 34-A
Measured on the Boonton 34-A
19
Accu-F® / Accu-P®
Environmental / Mechanical Characteristics
ENVIRONMENTAL CHARACTERISTICS
TEST
1
CONDITIONS
REQUIREMENT
Life (Endurance)
MIL-STD-202F Method 108A
125°C, 2UR,1000 hours
No visible damage
∅ C/C ≤ 2% for C≥5pF
∅ C ≤ 0.25pF for C<5pF
Accelerated Damp
Heat Steady State
MIL-STD-202F Method 103B
85°C, 85% RH, UR, 1000 hours
No visible damage
∅ C/C ≤ 2% for C≥5pF
∅ C ≤ 0.25pF for C<5pF
Temperature Cycling
MIL-STD-202F Method 107E
MIL-STD-883D Method 1010.7
-55°C to +125°C, 15 cycles – Accu-P®
-55°C to +125°C, 5 cycles – Accu-F®
No visible damage
∅ C/C ≤ 2% for C≥5pF
Resistance to Solder Heat
IEC-68-2-58
260°C ± 5°C for 10 secs
∅ C ≤ 0.25pF for C<5pF
C remains within initial limits
MECHANICAL CHARACTERISTICS
TEST
Solderability
IEC-68-2-58
Leach Resistance
IEC-68-2-58
Adhesion
MIL-STD-202F Method 211A
Termination Bond Strength
IEC-68-2-21 Amend. 2
CONDITIONS
REQUIREMENT
Components completely immersed in a
solder bath at 235°C for 2 secs.
Components completely immersed in a
solder bath at 260±5°C for 60 secs.
A force of 5N applied for 10 secs.
Terminations to be well tinned, minimum 95%
coverage
Dissolution of termination faces ≤15% of area
Dissolution of termination edges ≤25% of length
No visible damage
Tested as shown in diagram
No visible damage
∅ C/C ≤ 2% for C≥5pF
∅ C ≤ 0.25pF for C<5pF
D
D = 3mm Accu-P
D = 1mm Accu-F
Robustness of Termination
IEC-68-2-21 Amend. 2
High Frequency Vibration
MIL-STD-202F Method 201A,
204D (Accu-P ® only)
Storage
45mm
A force of 5N applied for 10 secs.
No visible damage
55Hz to 2000Hz, 20G
No visible damage
12 months minimum with components
stored in “as received” packaging
Good solderability
QUALITY & RELIABILITY
Accu-P® is based on well established thin-film technology
and materials.
• ON-LINE PROCESS CONTROL
This program forms an integral part of the production cycle
and acts as a feedback system to regulate and control
production processes. The test procedures, which are
integrated into the production process, were developed
after long research work and are based on the highly
developed semiconductor industry test procedures and
equipment. These measures help AVX to produce a consistent and high yield line of products.
• FINAL QUALITY INSPECTION
Finished parts are tested for standard electrical parameters
and visual/mechanical characteristics. Each production lot
is 100% evaluated for: capacitance and proof voltage at
2.5 UR. In addition, production is periodically evaluated for:
20
45mm
Average capacitance with histogram printout for
capacitance distribution;
IR and Breakdown Voltage distribution;
Temperature Coefficient;
Solderability;
Dimensional, mechanical and temperature stability.
QUALITY ASSURANCE
The reliability of these thin-film chip capacitors has been
studied intensively for several years. Various measures
have been taken to obtain the high reliability required today
by the industry. Quality assurance policy is based on well
established international industry standards. The reliability
of the capacitors is determined by accelerated testing
under the following conditions:
Life (Endurance)
125°C, 2UR, 1000 hours
Accelerated Damp
Heat Steady State
85°C, 85% RH, UR,
1000 hours.
Accu-F® / Accu-P®
Performance Characteristics RF Power Applications
RF POWER APPLICATIONS
In RF power applications capacitor losses generate heat. Two
factors of particular importance to designers are:
• Minimizing the generation of heat.
• Dissipating heat as efficiently as possible.
CAPACITOR HEATING
• The major source of heat generation in a capacitor in RF
power applications is a function of RF current (I) and ESR,
from the relationship:
Power dissipation = I2RMS x ESR
• Accu-P® capacitors are specially designed to minimize
PRODUCT
Accu-P®
Microwave MLC
8
ESR and therefore RF heating. Values of ESR for
Accu-P® capacitors are significantly less than those of
ceramic MLC components currently available.
HEAT DISSIPATION
• Heat is dissipated from a capacitor through a variety of
paths, but the key factor in the removal of heat is the
thermal conductivity of the capacitor material.
• The higher the thermal conductivity of the capacitor, the
more rapidly heat will be dissipated.
• The table below illustrates the importance of thermal
conductivity to the performance of Accu-P® in power
applications.
MATERIAL
Alumina
Magnesium Titanate
THERMAL CONDUCTIVITY W/mK
18.9
6.0
Power Handling
Accu-P® 10pF
Amps
Data used in calculating the graph:
Thermal impedance of capacitors:
6
1210
1210
0805
4
0805
0603
0402
ESR of capacitors measured on Boonton 34A
2
0
0402
17°C/W
0603
12°C/W
0805
6.5°C/W
1210
5°C/W
Thermal impedance measured using RF generator,
amplifier and strip-line transformer.
0
200
400
600
800 1000 1200 1400MHz
THERMAL IMPEDANCE
Thermal impedance of Accu-P® chips is shown below compared with the thermal impedance of Microwave MLC’s.
CAPACITOR TYPE
Accu-P®
Microwave MLC
The thermal impedance expresses the temperature difference
in °C between chip center and termination caused by
a power dissipation of 1 watt in the chip. It is expressed in
°C/W.
CHIP SIZE
0805
1210
0505
1210
ADVANTAGES OF ACCU-P®
IN RF POWER CIRCUITS
The optimized design of Accu-P® offers the designer of RF
power circuits the following advantages:
• Reduced power losses due to the inherently low ESR of
Accu-P®.
• Increased power dissipation due to the high thermal
conductivity of Accu-P®.
• THE ONLY TRUE TEST OF A CAPACITOR IN ANY PARTICULAR
APPLICATION IS ITS PERFORMANCE UNDER OPERATING
CONDITIONS IN THE ACTUAL CIRCUIT.
THERMAL IMPEDANCE (°C/W)
6.5
5
12
7.5
PRACTICAL APPLICATION
IN RF POWER CIRCUITS
• There is a wide variety of different experimental methods
for measuring the power handling performance of a
capacitor in RF power circuits. Each method has its
own problems and few of them exactly reproduce the
conditions present in “real” circuit applications.
• Similarly, there is a very wide range of different circuit applications, all with their unique characteristics and operating
conditions which cannot possibly be covered by such
“theoretical” testing.
21
1
Accu-F® / Accu-P®
Application Notes
GENERAL
HANDLING
Accu-F and Accu-P SMD capacitors are designed for
soldering to printed circuit boards or other substrates. The
construction of the components is such that they will withstand the time/temperature profiles used in both wave and
reflow soldering methods.
SMD capacitors should be handled with care to avoid damage
or contamination from perspiration and skin oils. The use of
plastic tipped tweezers or vacuum pick-ups is strongly recommended for individual components. Bulk handling should
ensure that abrasion and mechanical shock are minimized. For
automatic equipment, taped and reeled product gives the
ideal medium for direct presentation to the placement
machine.
CIRCUIT BOARD TYPE
COMPONENT PAD DESIGN
The circuit board types which may be used with Accu-F® and
Accu-P® are as follows:
Accu-F®: All flexible types of circuit boards
(eg. FR-4, G-10).
Accu-P®: All flexible types of circuit boards
(eg. FR-4, G-10) and also alumina.
For other circuit board materials, please consult factory.
Component pads must be designed to achieve good
joints and minimize component movement during reflow
soldering. Pad designs are given below for both wave and
reflow soldering.
The basis of these designs is:
a. Pad width equal to component width. It is permissible to
decrease this to as low as 85% of component width but
it is not advisable to go below this.
b. Pad overlap 0.5mm beneath large components. Pad
overlap about 0.3mm beneath small components.
c. Pad extension of 0.5mm for reflow of large components
and pad extension about 0.3mm for reflow of small components. Pad extension about 1.0mm for wave soldering.
®
®
1
WAVE SOLDERING
DIMENSIONS: millimeters (inches)
1.5
(0.059)
1.5
(0.059)
0.8
(0.031)
0.26
(0.010)
0.40
(0.016)
2.1
(0.083)
1.06
(0.042)
0.40
(0.016)
1.2
(0.047)
0.5
(0.020)
1.25
(0.049)
5.0
(0.197)
4.0
(0.157)
2.0
(0.079)
1.0
(0.039)
3.1
(0.122)
3.1
(0.122)
0.7
(0.028)
0.6
(0.024)
0.8
(0.031)
0.34
(0.013)
1.5
(0.059)
1.25
(0.049)
1.2
(0.047)
1.5
(0.059)
0.55
(0.022)
0.8
(0.031)
0201
Accu-P®
0402
Accu-P®
0603
Accu-F®
1.25
(0.049)
0.8
(0.031)
0603
Accu-P®
2.5
(0.098)
0805
Accu-F®
Accu-P®
1210
Accu-P®
REFLOW SOLDERING
DIMENSIONS: millimeters (inches)
0.26
(0.010)
0.8
(0.031)
0.26
(0.010)
0.6
(0.024)
1.7
(0.068)
0.78
(0.030)
0.26
(0.010)
0.34
(0.013)
0.5
(0.020)
22
2.3
(0.091)
1.0
(0.039)
0.85
(0.033)
2.3
(0.091)
0.7
(0.028)
4.0
(0.157)
2.0
(0.079)
3.0
(0.118)
0.6
(0.024)
1.0
(0.039)
0.85
(0.033)
0.8
(0.031)
0.6
(0.024)
1.0
(0.039)
0.55
(0.022)
0201
Accu-P®
1.0
(0.039)
0402
Accu-P®
0.8
(0.031)
1.0
(0.039)
0.8
(0.031)
1.25
(0.049)
0603
Accu-F®
0603
Accu-P®
0805
Accu-F®
Accu-P®
2.5
(0.098)
1210
Accu-P®
Accu-F® / Accu-P®
Application Notes
PREHEAT & SOLDERING
CLEANING RECOMMENDATIONS
The rate of preheat in production should not exceed 4°C/
second and a recommended maximum is about 2°C/second.
Temperature differential from preheat to soldering should not
exceed 100°C.
For further specific application or process advice, please consult
AVX.
Care should be taken to ensure that the devices are
thoroughly cleaned of flux residues, especially the space
beneath the device. Such residues may otherwise become
conductive and effectively offer a lossy bypass to the device.
Various recommended cleaning conditions (which must be
optimized for the flux system being used) are as follows:
Cleaning liquids. . . . . . . i-propanol, ethanol, acetylacetone,
water and other standard PCB
cleaning liquids.
Ultrasonic conditions . . power-20w/liter max.
frequency-20kHz to 45kHz.
Temperature . . . . . . . . . 80°C maximum (if not otherwise
limited by chosen solvent system).
Time . . . . . . . . . . . . . . . 5 minutes max.
COOLING
After soldering, the assembly should preferably be allowed
to cool naturally. In the event of assisted cooling, similar
conditions to those recommended for preheating should be
used.
HAND SOLDERING & REWORK
Hand soldering is permissible. Preheat of the PCB to 150°C is
required. The most preferable technique is to use hot air soldering tools. Where a soldering iron is used, a temperature
controlled model not exceeding 30 watts should be used and
set to not more than 260°C.
STORAGE CONDITIONS
Recommended storage conditions for Accu-F®
Accu-P® prior to use are as follows:
Temperature . . . . . . . . . . 15°C to 35°C
Humidity . . . . . . . . . . . . . ≤65%
Air Pressure . . . . . . . . . . 860mbar to 1060mbar
and
RECOMMENDED SOLDERING
PROFILE
IR REFLOW
WAVE SOLDERING
Assembly enters the
preheat zone
Additional soak time
to allow uniform
heating of the
substrate
45-60 sec.
above solder
melting point
186°C solder melting
temperature
Soak time
1) Activates the flux
2) Allows center of board
temperatures to catch up with
corners
0
0.5
1
1.5
2
TEMPERATURE °C
Assembly exits heat–
no forced cooldown
260
240
220
200
180
160
140
120
100
80
60
40
20
100°C
Enter Wave
Time (seconds)
0
2.5
3
3.5
4
Natural
Cooling
10
20
30
40
50
60
70
80
90
100
110
120
4.5
Time (mins)
VAPOR PHASE
Transfer from
preheat with
min. delay &
temp. loss
Preheat
215°C
200
TEMPERATURE °C
COMPONENT LAND TEMP (DEG C)
3–5 seconds
220
210
200
190
180
170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
180
160
160
140
140
120
120
100
100
80
80
60
60
40
40
20
Reflow
215°C
200
180
Duration varies
with thermal mass
of assembly
10–60 secs typical
Natural
Cooling
Enter
Vapor
20
0
0
Time (minutes)
10
20
30
40
50
Time (seconds)
60
70
23
1
Accu-F®/Accu-P®
Automatic Insertion Packaging
TAPE & REEL
All tape and reel specifications are in compliance with EIA 481-1-A.
(equivalent to IEC 286 part 3).
• 8mm carrier
• Reeled quantities: Reels of 3,000 per 7" reel or 10,000 pieces per 13" reel
0201 and 0402 = 5,000 pieces per 7" reel and 20,000 pieces per 13" reel
1
REEL
DIMENSIONS: millimeters (inches)
A(1)
180±1.0
(7.087±0.039)
B
1.5 min.
(0.059 min.)
C
13±0.2
(0.512 ± 0.008)
D
20.2 min.
(0.795 min.)
E
50 min.
(1.969 min.)
F
9.6±1.5
(0.370 ± 0.050)
G
14.4 max.
(0.567 max.)
Metric dimensions will govern.
Inch measurements rounded and for reference only.
(1) 330mm (13 inch) reels are available.
G MAX.
B*
A
C
E
D*
FULL RADIUS
F
*DRIVE SPOKES OPTIONAL
IF USED, ASTERISKED
DIMENSIONS APPLY.
CARRIER
DIMENSIONS: millimeters (inches)
A
8.0 ± 0.3
(0.315 ± 0.012)
B
3.5 ± 0.05
(0.138 ± 0.002)
C
1.75±0.1
(0.069 ± 0.004)
D
2.0 ± 0.05
(0.079 ± 0.002)
E
4.0 ± 0.1
(0.157 ± 0.004)
F
1.5 +0.1
-0.0
(0.059 +0.004
-0.000 )
NOTE: The nominal dimensions of the component compartment (W,L) are derived from the component size.
E
D
F
10 PITCHES
CUMULATIVE
TOLERANCE ON
TAPE ±0.2
C
TOP
TAPE
W
B
A
L
P = 4mm except 0201 and 0402 where P = 2mm
P
DIRECTION OF FEED
CENTER LINES
OF CAVITY
NOTE: AVX reserves the right to change the information published herein without notice.
24