IPT Series Bayonet Lock Connectors IPT 08 AM Plug Connector with 90° EMI Shield Termination Backshell Suitable for MS3057 Cable Clamp (Not Included) IPT G 08 AM 18-11 S Z C XX MIL-C-26482 Series l Type Mod Code Options See Table II Grounding Finger (Omit for Standard) Contact Type C - Crimp (Omit for Solder Cup) 08 - 90° Backshell Connector/Backshell Class AM - Non-Environmental with Backshell for EMI Shield Termination Shell Size and Insert Arrangements Alternate Insert Rotation (W, X, Y, Z) Omit for Normal Contact Gender P - Pin S - Socket G APPLICATION NOTES NOTES APPLICATION 1. Plug with 90° backshell for cable clamp MS3057-A/B/C (not included). 2. Connector/Backshell Class “A” (non-environmental)––no grommet supplied. 3. Standard materials configuration consists of aluminum alloy with stainless steel coupling pins. 4. Standard contact material consists of copper alloy with gold plating over nickel. 5. A broad range of other front and rear connector accessories are available. See our website and/or contact factory for complete information. 6. Standard insert is high insulation synthetic rubber. © 2008 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] B-102 www.glenair.com IPT Series Bayonet Lock Connectors IPT 08 AM Plug Connector with 90° EMI Shield Termination Backshell Suitable for MS3057 Cable Clamp (Not Included) TABLE I: DIMENSIONS Shell size 8 F Thread in inches G Max. H ±1 L ±1 .5000 - 28 UNEF 19.05 19 32 10 .6250 - 24 UNEF 21.80 24 32 12 .7500 - 20 UNEF 26.20 27 35 14 .8750 - 20 UNEF 29.40 28 38 16 1.0000 - 20 UNEF 32.55 30 41 18 1.1875 - 18 UNEF 35.35 32 44 20 1.1875 - 18 UNEF 38.90 34 48 22 1.4375 - 18 UNEF 42.10 36 51 24 1.4375 - 18 UNEF 45.10 39 56 TABLE II: MODIFICATION CODES Shell Finish (Omit for Standard Cad/Olive Drab Finish) Assembly with Accessories (Omit for Standard Version) F2 - Bright Nickel Plating (RoHs) Key Polarization (Omit for N version) W, X, Y, Z = Alternates F6 - Black Electrodeposited Paint (RoHs) N0 - Connector Less Backshell F7 - Black Zn-Co Plating (RoHs) GXXX - Custom Designed Connector F8 - Olive Drab Zn-Co Plating STANDARD FINISHES (For QQ-A-591 Aluminum Shells) Requirements IAW RoHS Not IAW RoHS G3 Cadmium with Olive F8 Zinc Cobalt with F2 Electrolytic Nickel F6 Black Non Conductive F7 Black Conductive Drab Passivation Olive Drab Passivation Thermal Shock Salt Spray After Thermal Shock Electical Conductivity Abrasion Resistance © 2008 Glenair, Inc. -40°C + 100°C -55°C + 125°C -55°C + 125°C -55°C + 125°C -40°C + 100°C 24 hour 500 hour 500 hour 500 hour 200 hour Very Good Very Good NO Very Good Very Good Good Very Good Very Good Good Good U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] B-103 www.glenair.com