COTCO LUMINANT DEVICE (HUIZHOU) LTD. SPECIFICATION FOR COTCO LED LAMP Document No: Model No : Rev. No: Date: SPE/LC503PPG1-15Q-A3-MT LC503PPG1-15Q-A3-MT 01 2006-04-12 Description: 15 Degree 5mm LED Lamp in Pure Green Color with Water Transparent Lens and No Stopper *This specification is only for MT Dice Material: InGaN Confirmed by Customer: Date: ATTENTION OBSERVE PRECAUTIONS ELECTROSTATIC SENSITIVE DEVICES For part availability and ordering information please call Toll Free: 800.984.5337 Website: www.marktechopto.com | Email: [email protected] Document No. SPE/LC503PPG1-15Q-A3-MT Rev. No. 01 Applications: - Dimension Drawing Advertising Signs Indicators LCD Back Light Moving Message Sign Absolute Maximum Ratings at Ta = 25°C Items Absolute maximum Symbol Unit Rating Forward Current IF 25 mA Peak Forward Current* IFP 100 mA Reverse Voltage VR 5 V Power Dissipation PD 100 mW Operation Temperature Topr -40 ~ +95 °C Storage Temperature Tstg -40 ~ +100 °C Lead Soldering Temperature Max.260°C for 3 sec Max. Tsol (3mm from the base of the epoxy bulb) *pulse width <=0.1msec duty <=1/10 Typical Electrical & Optical Characteristics ( Ta = 25°C) Items Symbol Condition Min. Typ. Max. Unit Forward Voltage VF IF = 20mA --- 3.4 4.0 V Reverse Current IR VR = 5V --- --- 100 µA Dominant Wavelength λD IF = 20mA 520 527 535 nm Luminous Intensity IV IF = 20mA 5860 11000 --- mcd 50% Power Angle 2θ½H-H IF = 20mA --- 15 --- deg 2/4 Format #: COTCO-D-074 REV.4 Document No. SPE/LC503PPG1-15Q-A3-MT Rev. No. 01 Standard bins for LC503PPG1-15Q-A3-MT (IF = 20mA): Lamps are sorted to Luminous Intensity –IV, VF & Dominant Wavelength –λD bins shown. Orders for LC503PPG1-15Q-A3-MT may be filled with any or all bins contained as below. All Luminous Intensity –IV, VF & Dominant Wavelength –λD values shown and specified are at IF =20mA. * Y+ X7 X8 X9 Luminous Intensity (IV) 12000mcd Z 8200mcd Y 5860mcd 520nm 525nm 530nm 535nm Dominant Wavelength (λD) * Y+ indicates Luminous Intensity is at Y bin or above. Forward Voltage (VF) Rank V7 V8 V9 V10 V11 V12 Voltage 2.8-3.0V 3.0-3.2V 3.2-3.4V 3.4-3.6V 3.6-3.8V 3.8-4.0V *Majority VF bins are highlighted in Yellow. Important Notes: 1) All ranks will be included per delivery, rank ratio will be based on the Dices distribution. 2) Pb content <1000PPM. 3) Tolerance of measurement of luminous intensity is ±15%. 4) Tolerance of measurement of dominant wavelength is ±1nm. 5) Tolerance of measurement of Vf is ±0.05 V. 6) Packaging methods are available for selection, Please refer to PACKAGING STANDARD. 7) Please refer to LED LAMP RELIABILITY TEST STANDARD for reliability test conditions. 8) Please refer to APPLICATION NOTES for Application. 3/4 Format #: COTCO-D-074 REV.4 Document No. SPE/LC503PPG1-15Q-A3-MT Rev. No. 01 Graphs 1. Cathode PAD Area (0.18 x 0.18inch2) 2. Height above nominal seating plane in inches(0.3inch) Items Signatures Date Prepared by LiuZM 2006-04-12 Checked by Aldosin 2006-04-12 Approved by David 2006-04-12 FCN# Revision History Rev. No Date Change Description FCN20060 Data is subject to change without prior notice. Copyright@2002 Cotco International Ltd. 4/4 Format #: COTCO-D-074 REV.4