Ordering information
Rugged PCB type
LEA150F
LEA 150
1
2
F
3
-5
Recommended Noise Filter
NAC-06-472
R
High voltage pulse noise type : NAP series
Low leakage current type : NAM series
*The Noise Filter is recommended
*to connect with several devices.
MODEL
MAX OUTPUT WATTAGE[W]
DC OUTPUT
*5
-O
4
5
1Series name
2Output wattage
3Universal input
4Output voltage
5Optional
C :with Coating
G :Low leakage current
J2:Mini terminal block
R :with Remote ON/OFF
S :with Chassis
SN :with Chassis & cover
Y :with Potentiometer
LEA150F-3R3-Y LEA150F-5 LEA150F-9 LEA150F-12 LEA150F-15 LEA150F-18 LEA150F-24 LEA150F-24-H LEA150F-30 LEA150F-48
99
150
153
150
150
153
151.2
151.2
150
153.6
3.3V 30A
5V 30A
9V 17A
12V 12.5A 15V 10A
18V 8.5A
24V 6.3A
24V 6.3(7.5)A 30V 5A
48V 3.2A
SPECIFICATIONS
MODEL
VOLTAGE[V]
LEA
CURRENT[A]
ACIN 100V
ACIN 200V
FREQUENCY[Hz]
INPUT
OUTPUT
PROTECTION
CIRCUIT AND
OTHERS
ISOLATION
ENVIRONMENT
SAFETY AND
NOISE
REGULATIONS
OTHERS
ACIN 100V
ACIN 200V
ACIN 100V
POWER FACTOR
ACIN 200V
ACIN 100V
INRUSH CURRENT[A]
ACIN 200V
LEAKAGE CURRENT[mA]
VOLTAGE[V]
CURRENT[A]
*1
LINE REGULATION[mV]
LOAD REGULATION[mV]
0 to +50C *2
RIPPLE[mVp-p]
-10 - 0C *2
0 to +50C *2
RIPPLE NOISE[mVp-p]
-10 - 0C *2
0 to +50C
TEMPERATURE REGULATION[mV]
-10 to +50C
DRIFT[mV]
*3
START-UP TIME[ms]
HOLD-UP TIME[ms]
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]
OUTPUT VOLTAGE SETTING[V]
OVERCURRENT PROTECTION
OVERVOLTAGE PROTECTION
OPERATING INDICATION
REMOTE SENSING
REMOTE ON/OFF
INPUT-OUTPUT -RC
*4
INPUT-FG
OUTPUT-RC-FG
*4
OUTPUT-RC
*4
OPERATING TEMP.,HUMID.AND ALTITUDE
STORAGE TEMP.,HUMID.AND ALTITUDE
VIBRATION
IMPACT
AGENCY APPROVALS
CONDUCTED NOISE
HARMONIC ATTENUATOR
CASE SIZE/WEIGHT
COOLING METHOD
EFFICIENCY[%]
LEA150F-3R3-Y LEA150F-5 LEA150F-9 LEA150F-12 LEA150F-15 LEA150F-18 LEA150F-24 LEA150F-24-H
AC85 - 264 1f or DC120 - 370
1.4
2.0typ
0.7
1.0typ
50/60 (47 - 63) or DC
71typ
76typ
79typ
78typ
80typ
81typ
81typ
81typ
74typ
79typ
82typ
81typ
83typ
84typ
84typ
84typ
0.98typ
0.99typ
0.91typ
0.94typ
15typ (Io=100%) (At cold start) (Ta=25 C)
30typ (Io=100%) (At cold start) (Ta=25 C)
0.75max (60Hz, According to IEC60950 and DEN-AN)
3.3
5
9
12
15
18
24
24
30
30
17
12.5
10
8.5
6.3
6.3 (Peak 7.5)
20max
20max
36max
48max
60max
72max
96max
96max
40max
40max
100max
100max
120max
120max
150max
150max
80max
80max
120max
120max
120max
120max
120max
120max
140max
140max
160max
160max
160max
160max
160max
160max
120max
120max
150max
150max
150max
150max
150max
150max
160max
160max
180max
180max
180max
180max
180max
180max
50max
50max
90max
120max
150max
180max
240max
240max
60max
60max
120max
150max
180max
200max
290max
290max
20max
20max
36max
48max
60max
72max
96max
96max
500max (ACIN 100V, Io=100%)
20typ (Io=100%)
2.85 - 3.6
Fixed ("Y"which can be adjusted the output is available as optional:t10%)
3.25 - 3.35 4.9 - 5.3
8.6 - 9.4
11.5 - 12.5 14.4 - 15.6 17.3 - 18.7 23.0 - 25.0 23.0 - 25.0
Works over 105% of rating (works over 105% of peak current at option -H) and recovers automatically
4.00 - 5.25V Works at 115 - 140% of rating
Not provided
Not provided
Option (Refer to Instruction Manual)
AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature)
AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature)
AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (At Room Temperature)
AC100V 1minute, Cutoff current = 100mA, DC100V 10MW min (At Room Temperature)
-10 to +60C, 20 - 90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max
-20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) max
10 - 55Hz, 19.6m/s2 (2G), 3minutes period, 60minutes each along X, Y and Z axis
196.1m/s2 (20G), 11ms, once each X, Y and Z axis
UL60950-1, C-UL, EN60950-1, EN50178 Complies with DEN-AN and IEC60950-1 (At only AC input)
Complies with FCC-B, CISPR22-B, EN55022-B, VCCI-B
Complies with IEC61000-3-2
75X40X222mm (WXHXD) /500g max (without chassis and cover)
Convection
*1 Peak load for 10 sec. or less is acceptable if the total wattage is less than the rated wattage.
*2 This is the value that measured on measuring board with capacitor of 22mF within 150mm
from output terminal.
Measured by 20MHz oscilloscope or Ripple-Noise meter (Equivalent to KEISOKU-GIKEN:
RM101).
*3 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C,
E-24
*4
*5
*
*
with the input voltage held constant at the rated input/output.
Applicable when remote control (optional) is added.
( ): peak current.
Parallel operation with other model is not possible.
Derating is required when operated with chassis and cover.
LEA150F-30 LEA150F-48
84typ
87typ
84typ
87typ
30
5
120max
180max
120max
160max
150max
180max
300max
360max
120max
48
3.2
192max
300max
150max
200max
350max
400max
480max
600max
192max
28.5 - 31.5 46.0 - 50.0
LEA150F
External view
25
8
235-+0.5
4-M4
Mounting Hole
42
15
CN3
CN3
Output(-)
CN1
85
C119
4.5
FG
AC(N)
AC(L)
65-+0.5
75
CN1
2-º4.5
55-+0.5
4-º3.5
Mounting
Hole
35-+0.5
Name plate
Output(+)
CN2
CN2
5
RC(-)RC(+)
Connector for Remote
CN4 ON/OFF (Optional)
29.5
Voltage adjust
(Optional)
212-+0.5
222
5
252
235-+0.5
8
4.5
37
(Lead)
3max
2-M4
Mounting Hole
PCB t=1.6
PIN CONNECTION
I / O Connector Mating Connector
CN1 B3P5-VH
VHR-5N
CN2 B6P-VH
VHR-6N
CN3 B7P-VH
VHR-7N
CN4 B2B-XH-A
XHP-2
Terminal
Chain : SVH-21T-P1.1
Loose: BVH-21T-P1.1
Chain : SVH-21T-P1.1
Loose: BVH-21T-P1.1
Chain : SVH-21T-P1.1
Loose: BVH-21T-P1.1
Chain : SXH-001T-P0.6
Loose: BXH-001T-P0.6
(Mfr: J.S.T.)
20 15
51
º4.5
Optional
Pin No. Input
1
AC(L)
2
CN1
3
AC(N)
4
5
FG
Pin No. Output
CN2
1~6
¶Weight: 500g or less
(Without chassis and cover)
¶Tolerance: t1
¶Dimensions in mm.
¶PCB Material: Glass composite
(CEM3)
¶Chassis and cover is optional.
¶Chassis and cover is not available
to remote ON/OFF unit.
¶Mounting torque: 1.5N · m(16kgf · cm)max
Pin No. Remote ON/OFF
+V
1
RC(+)
2
RC(-)
CN4
CN3
1~7
-V
¶Keep drawing current per pin below 5A for CN2, CN3
Performance data
¡RISE TIME & FALL TIME (LEA150F-5)
¡EFFICIENCY (LEA150F-5)
82
EFFICIENCY
80
DC Output
ACIN 100V Io=100%
AC Input
78
76
Load factor100%
Load factor 50%
74
60
50ms/DIV
¡INPUT HARMONIC CURRENT (LEA150F-5)
140
180
220
INPUT VOLTAGE
260
300
V
¡INPUT HARMONIC CURRENT (LEA150F-5)
10
10
HARMONIC CURRENT
Load factor
100%
Input voltage AC 100V
1
Harmonic current standard class A
(at odd number)
A
Harmonic current standard class A
(at odd number)
A
HARMONIC CURRENT
100
0.1
0.01
1
Load factor
100%
Input voltage AC 230V
0.1
0.01
0.001
0.001
0
10
20
30
0
40
HARMONIC ORDER
10
20
Distribution:
RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany
Tel. +49 69 984047-0 Fax +49 69 984047-77 [email protected] www.rsg-electronic.de
■
■
Änderungen vorbehalten / subject to change without notice
30
40
HARMONIC ORDER
■
■
■
E-25
LEA