TI LMV358QPWRQ1

LMV321-Q1 SINGLE, LMV358-Q1 DUAL, LMV324-Q1 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS415E − JUNE 2003 − REVISED APRIL 2008
D
D
D
D
D
LMV324 . . . D OR PW PACKAGE
(TOP VIEW)
Qualified for Automotive Applications
2.7-V and 5-V Performance
No Crossover Distortion
Low Supply Current:
LMV321 . . . 130 µA Typ
LMV358 . . . 210 µA Typ
LMV324 . . . 410 µA Typ
Rail-to-Rail Output Swing
1OUT
1IN−
1IN+
VCC+
2IN+
2IN−
2OUT
1
14
2
13
3
12
4
11
5
10
6
9
7
8
4OUT
4IN−
4IN+
GND
3IN+
3IN−
3OUT
description/ordering information
LMV358 . . . D OR PW PACKAGE
(TOP VIEW)
The LMV321, LMV358, and LMV324 are single,
dual, and quad low-voltage (2.7 V to 5.5 V)
operational amplifiers with rail-to-rail output
swing.
1OUT
1IN−
1IN+
GND
The LMV321, LMV358, and LMV324 are the most
cost-effective solution for applications where
low-voltage operation, space saving, and low
price are required. These amplifiers were
designed specifically for low-voltage (2.7 V to 5 V)
operation, with performance specifications
meeting or exceeding the LM358 and LM324
devices that operate from 5 V to 30 V. Additional
features of the LMV3xx devices are a
common-mode input voltage range that includes
ground, 1-MHz unity-gain bandwidth, and 1-V/µs
slew rate.
1
8
2
7
3
6
4
5
VCC+
2OUT
2IN−
2IN+
LMV321 . . . DBV PACKAGE
(TOP VIEW)
1IN+
1
GND
2
IN−
3
5
VCC+
4
OUT
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright  2008, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
1
LMV321-Q1 SINGLE, LMV358-Q1 DUAL, LMV324-Q1 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS415E − JUNE 2003 − REVISED APRIL 2008
ORDERING INFORMATION{
PACKAGE†
TA
−40°C to 85°C
Single
−40°C
40 C to 85°C
85 C
Dual
SOT23-5 (DBV)
Quad
Q
−40°C to 125°C
Single
−40°C
40 C to 125
125°C
C
Dual
LMV321IDBVRQ1
Tube of 75
LMV358IDQ1
Reel of 2500
LMV358IDRQ1
Reel of 2000
LMV358IPWRQ1
Tube of 50
LMV324IDQ1
Reel of 2500
LMV324IDRQ1
TSSOP (PW)
Reel of 2000
LMV324IPWRQ1
V324IQ1
SOT23-5 (DBV)
Reel of 3000
LMV321QDBVRQ1
RCCB
Tube of 75
LMV358QDQ1
Reel of 2500
LMV358QDRQ1
Reel of 2000
LMV358QPWRQ1
Tube of 50
LMV324QDQ1
Reel of 2500
LMV324QDRQ1
Reel of 2000
LMV324QPWRQ1
SOIC (D)
SOIC (D)
SOIC (D)
TSSOP (PW)
−40°C to 125°C
Quad
Q
TOP-SIDE
MARKING
Reel of 3000
TSSOP (PW)
−40°C to 85°C
ORDERABLE
PART NUMBER
SOIC (D)
TSSOP (PW)
†
RC1B
358IQ1
358IQ1
LMV324IQ1
V358Q1
V358Q1
LMV324Q1
MV324Q1
For the most current package and ordering information, see the Package Option Addendum at the end of this
document, or see the TI web site at http://www.ti.com.
‡ Package drawings, thermal data, and symbolization are available at http://www.ti.com/packaging.
symbol (each amplifier)
−
IN−
OUT
2
+
IN+
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
LMV321-Q1 SINGLE, LMV358-Q1 DUAL, LMV324-Q1 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS415E − JUNE 2003 − REVISED APRIL 2008
LMV324 simplified schematic
VCC
VBIAS1
+
VCC
−
VBIAS2
+
Output
−
VCC VCC
VBIAS3
+
IN−
IN+
VBIAS4−
+
−
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V
Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±5.5 V
Input voltage, VI (either input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to 5.5 V
Duration of output short circuit (one amplifier) to ground at (or below) TA = 25°C,
VCC ≤ 5.5 V (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited
Package thermal impedance, θJA (see Notes 4 and 5): D (8-pin) package . . . . . . . . . . . . . . . . . . . . . . 97°C/W
D (14-pin) package . . . . . . . . . . . . . . . . . . . . 86°C/W
DBV (5-pin) package . . . . . . . . . . . . . . . . . . 206°C/W
PW (8-pin) package . . . . . . . . . . . . . . . . . . . 149°C/W
PW (14-pin) package . . . . . . . . . . . . . . . . . . 113°C/W
Operating virtual junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65 to 150°C
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values (except differential voltages and VCC specified for the measurement of IOS) are with respect to the network GND.
2. Differential voltages are at IN+ with respect to IN−.
3. Short circuits from outputs to VCC can cause excessive heating and eventual destruction.
4. Maximum power dissipation is a function of TJ(max), qJA, and TA. The maximum allowable power dissipation at any allowable
ambient temperature is PD = (TJ(max) − TA)/qJA. Selecting the maximum of 150°C can affect reliability.
5. The package thermal impedance is calculated in accordance with JESD 51-7.
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
3
LMV321-Q1 SINGLE, LMV358-Q1 DUAL, LMV324-Q1 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS415E − JUNE 2003 − REVISED APRIL 2008
recommended operating conditions (see Note 6)
VCC
Supply voltage (single-supply operation)
VIH
t rn on voltage
oltage level
le el
Amplifier turn-on
VIL
Amplifier turn
turn-off
off voltage level
TA
free air temperature
Operating free-air
MIN
MAX
2.7
5.5
VCC = 2.7 V
1.7
VCC = 5 V
3.5
UNIT
V
V
VCC = 2.7 V
0.7
VCC = 5 V
1.5
I suffix
−40
85
Q suffix
−40
125
V
°C
NOTE 6: All unused control inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
electrical characteristics at TA = 25°C, VCC+ = 2.7 V (unless otherwise noted)
PARAMETER
VIO
aV
TEST CONDITIONS
MIN
Input offset voltage
IO
Average temperature coefficient
of input offset voltage
TYP
MAX
1.7
7
UNIT
mV
mV/°C
5
IIB
Input bias current
11
250
nA
IIO
Input offset current
5
50
nA
CMRR
Common-mode rejection ratio
VCM = 0 to 1.7 V
kSVR
Supply-voltage rejection ratio
VCC = 2.7 V to 5 V,
VICR
Common-mode input voltage range
CMRR w 50 dB
Output swing
RL = 10 kΩ to 1.35
1 35 V
VO = 1 V
High level
Low level
Supply
pp y current
B1
Unity-gain bandwidth
fm
Gm
Vn
Equivalent input noise voltage
In
Equivalent input noise current
4
63
dB
50
60
dB
0 to 1.7
−0.2 to 1.9
V
VCC − 100
VCC − 10
60
180
80
170
LMV358 (both amplifiers)
140
340
LMV324 (all four amplifiers)
260
680
LMV321
ICC
50
CL = 200 pF
mV
mA
m
1
MHz
Phase margin
60
deg
Gain margin
10
dB
f = 1 kHz
46
nV/√Hz
f = 1 kHz
0.17
pA/√Hz
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
LMV321-Q1 SINGLE, LMV358-Q1 DUAL, LMV324-Q1 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS415E − JUNE 2003 − REVISED APRIL 2008
electrical characteristics at specified free-air temperature range, VCC+ = 5 V (unless otherwise
noted)
PARAMETER
TA†
TEST CONDITIONS
MIN
25°C
VIO
aV
Input offset voltage
IO
MAX
1.7
7
Full range
Average temperature coefficient
of input offset voltage
9
25°C
5
25°C
15
UNIT
mV
mV/°C
250
IIB
Input bias current
IIO
Input offset current
CMRR
Common-mode rejection ratio
VCM = 0 to 4 V
25°C
50
65
dB
kSVR
Supply-voltage rejection ratio
VCC = 2.7 V to 5 V, VO = 1 V,
VCM = 1 V
25°C
50
60
dB
VICR
Common mode
Common-mode
input voltage range
CMMR w 50 dB
25°C
0 to 4
−0.2
0 2 to 4.2
42
V
VCC − 40
Full range
500
25°C
25°C
VCC − 300
Full range
VCC − 400
Low
level
Full range
High
level
RL = 10 kΩ to 2.5
25V
AVD
IOS
Output short-circuit
short circuit current
Low
level
RL = 2 kΩ
Sourcing, VO = 0 V
25°C
VCC − 100
Full range
VCC − 200
25°C
ICC
Supply current
65
15
Full range
10
V/mV
5
60
10
160
130
25°C
CL = 200 pF
mA
250
350
210
Full range
LMV324 (all four amplifiers)
180
100
Full range
LMV358 (both amplifiers)
mV
280
25°C
25°C
300
VCC − 10
Full range
25°C
LMV321
nA
400
25°C
25°C
Sinking, VO = 5 V
120
nA
50
150
High
level
Output swing
Large signal differential
Large-signal
voltage gain
5
Full range
RL = 2 kΩ to 2.5
25V
†
TYP
440
615
410
Full range
A
mA
830
1160
B1
Unity-gain bandwidth
25°C
1
MHz
fm
Phase margin
25°C
60
deg
Gm
Gain margin
25°C
10
dB
Vn
Equivalent input noise voltage
f = 1 kHz
25°C
39
nV/√Hz
In
Equivalent input noise current
f = 1 kHz
25°C
0.21
pA/√Hz
SR
Slew rate
25°C
1
V/ms
Full range is −40°C to 85°C for I-level part, −40°C to 125°C for Q-level part.
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
5
LMV321-Q1 SINGLE, LMV358-Q1 DUAL, LMV324-Q1 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS415E − JUNE 2003 − REVISED APRIL 2008
TYPICAL CHARACTERISTICS
30
30
100
Phase
10
50
0
600 Ω
−20
1
10
100
10
50
0
−10
1
10
Frequency − kHz
100
Figure 2
GAIN AND PHASE MARGIN
vs
FREQUENCY
GAIN AND PHASE MARGIN
vs
FREQUENCY
100
70
100
60
80
60
80
60
50
40
40
16 pF
30
20
100 pF
20
10
0
−10
−20
10
0
Gain
−20
500 pF
1000 pF
VCC = 5 V
RL = 600 W
CL = 16 pF, 100 pF,
500 pF, 1000 pF
16 pF
100 pF
500 pF
1000 pF
100
1000
Frequency − kHz
Phase
30
40
20
16 pF
500 pF
Gain
20
0
100 pF
−20
10
−40
0
−60
−10
16 pF
100 pF
VCC = 5 V
RL = 100 kΩ
CL = 16 pF, 100 pF,
500 pF, 1000 pF
−20
10
−80
10000
100
1000 pF
1000
Frequency − kHz
Figure 4
Figure 3
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
60
1000 pF
40
Gain − dB
Phase
Phase Margin − Deg
70
50
Gain − dB
1000
Frequency − kHz
Figure 1
6
−50
10000
−20
−50
10000
1000
100
Phase
0
0
−10
2 kΩ
20
Gain − dB
2 kΩ
600 Ω
150
Gain
100 kΩ
Phase Margin − Deg
Gain − dB
Gain
200
VCC = 5 V
RL = 100 kΩ, 2 kΩ, 600 Ω
150
100 kΩ
20
40
200
VCC = 2.7 V
RL = 100 kΩ, 2 kΩ, 600 Ω
500 pF
−40
−60
−80
10000
Phase Margin − Deg
40
GAIN AND PHASE MARGIN
vs
FREQUENCY
Phase Margin − Deg
GAIN AND PHASE MARGIN
vs
FREQUENCY
LMV321-Q1 SINGLE, LMV358-Q1 DUAL, LMV324-Q1 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS415E − JUNE 2003 − REVISED APRIL 2008
TYPICAL CHARACTERISTICS
STABILITY
vs
CAPACITIVE LOAD
GAIN AND PHASE MARGIN
vs
FREQUENCY
50
160
85°C
25°C
−40°C
40
10000
2.5 V
_
130
100
Phase
20
70
Gain
40
10
VCC = 5 V
RL = 2 kΩ
TA = 85°C, 25°C, −40°C
0
−20
10000
100
1000
Frequency − kHz
VCC = ±2.5 V
AV = +1
RL = 2 kΩ
VO = 100 mVPP
10
−2
−1.5
−1
−0.5
0
Output Voltage − V
2.5 V
_
VO
+
RL
CL
Capacitive Load − nF
Capacitive Load − pF
1
1.5
STABILITY
vs
CAPACITIVE LOAD
10000
2.5 V
100
LMV3xx
(25% Overshoot)
−1.5
0.5
Figure 6
10000
10
−2.0
CL
100
STABILITY
vs
CAPACITIVE LOAD
1000
RL
LMV3xx
(25% Overshoot)
Figure 5
VI
VO
+
−2.5 V
1000
10
−10
10
Capacitive Load − pF
Gain − dB
30
Phase Margin − Deg
VI
−1
−0.5
0
Output Voltage − V
VCC = ±2.5 V
RL = 2 kΩ
AV = 10
VO = 100 mVPP
1000
LMV3xx
(25% Overshoot)
100
134 kΩ
+2.5 V
VCC = ±2.5 V
AV = +1
RL = 1 MΩ
VO = 100 mVPP
0.5
1
1.21 MΩ
_
VI
+
VO
RL
CL
−2.5 V
10
−2.0
1.5
−1.5
Figure 7
−1
−0.5
0
Output Voltage − V
0.5
1
1.5
Figure 8
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
7
LMV321-Q1 SINGLE, LMV358-Q1 DUAL, LMV324-Q1 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS415E − JUNE 2003 − REVISED APRIL 2008
TYPICAL CHARACTERISTICS
STABILITY
vs
CAPACITIVE LOAD
SLEW RATE
vs
SUPPLY VOLTAGE
10000
1.500
RL = 100 kΩ
1.400
LMV3xx
(25% Overshoot)
1.300
Slew Rate − V/ µs
Capacitive Load − nF
VCC = ±2.5 V
RL = 1 MΩ
AV = 10
VO = 100 mVPP
1000
100
134 kΩ
1.21 MΩ
_
−1.5
1.100
LMV3xx
1.000
PSLEW
0.900
0.700
VO
+
RL
CL
−0.5
0
0.600
−2.5 V
10
−2.0
NSLEW
0.800
+2.5 V
VI
Gain
1.200
−1
0.5
1
0.500
2.5
1.5
3.0
4.0
4.5
5.0
V CC − Supply Voltage − V
Output Voltage − V
Figure 9
Figure 10
SUPPLY CURRENT
vs
SUPPLY VOLTAGE − QUAD AMPLIFIER
INPUT CURRENT
vs
TEMPERATURE
700
−10
VCC = 5 V
VI = VCC/2
600
−20
TA = 85°C
500
Input Current − nA
Supply Current − µA
3.5
TA = 25°C
400
300
TA = −40°C
200
−30
LMV3xx
−40
−50
100
0
0
1
2
3
4
5
−60
−40 −30 −20 −10 0 10 20 30 40 50 60 70 80
6
TA − °C
VCC − Supply Voltage − V
Figure 12
Figure 11
8
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
LMV321-Q1 SINGLE, LMV358-Q1 DUAL, LMV324-Q1 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS415E − JUNE 2003 − REVISED APRIL 2008
TYPICAL CHARACTERISTICS
SOURCE CURRENT
vs
OUTPUT VOLTAGE
SOURCE CURRENT
vs
OUTPUT VOLTAGE
100
100
VCC = 2.7 V
VCC = 5 V
10
Sourcing Current − mA
Sourcing Current − mA
10
LMV3xx
1
0.1
1
0.1
0.01
0.01
0.001
0.001
LMV3xx
0.01
0.1
1
0.001
0.001
10
0.01
0.1
Figure 13
SINKING CURRENT
vs
OUTPUT VOLTAGE
100
100
VCC = 2.7 V
VCC = 5 V
10
Sinking Current − mA
10
Sinking Current − mA
10
Figure 14
SINKING CURRENT
vs
OUTPUT VOLTAGE
1
LMV3xx
0.1
1
LMV324
0.1
0.01
0.01
0.001
0.001
1
Output Voltage Referenced to VCC+ − V
Output Voltage Referenced to VCC+ − V
0.01
0.1
1
0.001
0.001
10
0.01
0.1
1
10
Output Voltage Referenced to GND − V
Output Voltage Referenced to GND − V
Figure 15
Figure 16
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
9
LMV321-Q1 SINGLE, LMV358-Q1 DUAL, LMV324-Q1 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS415E − JUNE 2003 − REVISED APRIL 2008
TYPICAL CHARACTERISTICS
SHORT-CIRCUIT CURRENT
vs
TEMPERATURE
SHORT-CIRCUIT CURRENT
vs
TEMPERATURE
300
120
100
240
Sourcing Current − mA
Sinking Current − mA
270
LMV3xx
VCC = 5 V
210
180
150
120
LMV3xx
VCC = 2.7 V
90
60
80
LMV3xx
VCC = 5 V
60
LMV3xx
VCC = 2.7 V
40
20
30
0
−40 −30 −20 −10 0
0
10 20 30 40 50 60 70 80 90
TA − °C
TA − °C
Figure 18
−kSVR
vs
FREQUENCY
+kSVR
vs
FREQUENCY
90
VCC = −5 V
RL = 10 kΩ
70
60
+k SVR − dB
−k SVR − dB
70
LMV3xx
40
30
LMV3xx
50
40
30
20
20
10
10
1K
10K
100K
0
100
1M
1K
10K
Frequency − Hz
Frequency − Hz
Figure 19
10
VCC = 5 V
RL = 10 kΩ
80
50
0
100
10 20 30 40 50 60 70 80 90
Figure 17
80
60
−40 −30 −20−10 0
Figure 20
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
100K
1M
LMV321-Q1 SINGLE, LMV358-Q1 DUAL, LMV324-Q1 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS415E − JUNE 2003 − REVISED APRIL 2008
TYPICAL CHARACTERISTICS
+kSVR
vs
FREQUENCY
−kSVR
vs
FREQUENCY
80
80
VCC = −2.7 V
RL = 10 kΩ
70
60
60
LMV3xx
LMV3xx
50
+k SVR − dB
−k SVR − dB
VCC = 2.7 V
RL = 10 kΩ
70
40
30
50
40
30
20
20
10
10
0
100
1K
10K
100K
0
100
1M
1K
Frequency − Hz
Figure 21
Figure 22
OUTPUT VOLTAGE SWING
vs
SUPPLY VOLTAGE
6
70
1M
RL = 10 kΩ
THD > 5%
AV = 3
RL = 10 kΩ
60
5
50
100K
OUTPUT VOLTAGE
vs
FREQUENCY
Peak Output Voltage − V OPP
Output Voltage Swing vs Supply Voltage − mV
10K
Frequency − Hz
Negative Swing
40
30
20
Positive Swing
4
LMV3xx
VCC = 5 V
3
2
LMV3xx
VCC = 2.7 V
1
10
0
0
2.5
3.0
3.5
4.0
4.5
VCC − Supply Voltage − V
1
5.0
10
100
Frequency − kHz
1000
10000
Figure 24
Figure 23
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
11
LMV321-Q1 SINGLE, LMV358-Q1 DUAL, LMV324-Q1 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS415E − JUNE 2003 − REVISED APRIL 2008
TYPICAL CHARACTERISTICS
CROSSTALK REJECTION
vs
FREQUENCY
OPEN-LOOP OUTPUT IMPEDANCE
vs
FREQUENCY
150
110
100
LMV3xx
VCC = 5 V
140
Crosstalk Rejection − dB
Impedance − Ω
90
VCC = 5 V
RL = 5 kΩ
AV = 1
VO = 3 VPP
LMV3xx
VCC = 2.7 V
80
70
60
50
130
120
110
40
100
30
20
1
1000
2000
3000
90
100
4000
Frequency − kHz
Figure 25
12
1K
10K
Frequency − Hz
Figure 26
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
100K
LMV321-Q1 SINGLE, LMV358-Q1 DUAL, LMV324-Q1 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS415E − JUNE 2003 − REVISED APRIL 2008
TYPICAL CHARACTERISTICS
NONINVERTING LARGE-SIGNAL
PULSE RESPONSE
NONINVERTING LARGE-SIGNAL
PULSE RESPONSE
Input
LMV3xx
LMV3xx
1 V/Div
1 V/Div
Input
VCC = ±2.5 V
RL = 2 kΩ
T = 25°C
VCC = ±2.5 V
RL = 2 kΩ
TA = 85°C
1 µs/Div
1 µs/Div
Figure 27
Figure 28
NONINVERTING LARGE-SIGNAL
PULSE RESPONSE
Input
1 V/Div
LMV3xx
VCC = ±2.5 V
RL = 2 kΩ
TA = −40°C
1 µs/Div
Figure 29
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
13
LMV321-Q1 SINGLE, LMV358-Q1 DUAL, LMV324-Q1 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS415E − JUNE 2003 − REVISED APRIL 2008
TYPICAL CHARACTERISTICS
NONINVERTING SMALL-SIGNAL
PULSE RESPONSE
NONINVERTING SMALL-SIGNAL
PULSE RESPONSE
Input
Input
LMV3xx
50 mV/Div
50 mV/Div
LMV3xx
VCC = ±2.5 V
RL = 2 kΩ
TA = 85°C
VCC = ±2.5 V
RL = 2 kΩ
TA = 25°C
1 µs/Div
1 µs/Div
Figure 30
Figure 31
NONINVERTING SMALL-SIGNAL
PULSE RESPONSE
50 mV/Div
Input
LMV3xx
VCC = ±2.5 V
RL = 2 kΩ
TA = −40°C
1 µs/Div
Figure 32
14
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
LMV321-Q1 SINGLE, LMV358-Q1 DUAL, LMV324-Q1 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS415E − JUNE 2003 − REVISED APRIL 2008
TYPICAL CHARACTERISTICS
INVERTING LARGE-SIGNAL
PULSE RESPONSE
INVERTING LARGE-SIGNAL
PULSE RESPONSE
Input
Input
LMV3xx
1 V/Div
1 V/Div
LMV3xx
VCC = ±2.5 V
RL = 2 kΩ
TA = 25°C
VCC = ±2.5 V
RL = 2 kΩ
TA = 85°C
1 µs/Div
1 µs/Div
Figure 33
Figure 34
INVERTING LARGE-SIGNAL
PULSE RESPONSE
Input
1 V/Div
LMV3xx
VCC = ±2.5 V
RL = 2 kΩ
TA = −40°C
1 µs/Div
Figure 35
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
15
LMV321-Q1 SINGLE, LMV358-Q1 DUAL, LMV324-Q1 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS415E − JUNE 2003 − REVISED APRIL 2008
TYPICAL CHARACTERISTICS
INVERTING SMALL-SIGNAL
PULSE RESPONSE
INVERTING SMALL-SIGNAL
PULSE RESPONSE
Input
Input
LMV3xx
50 mV/Div
50 mV/Div
LMV3xx
VCC = ±2.5 V
RL = 2 kΩ
TA = 25°C
VCC = ±2.5 V
RL = 2 kΩ
TA = 85°C
1 µs/Div
1 µs/Div
Figure 36
Figure 37
INVERTING SMALL-SIGNAL
PULSE RESPONSE
50 mV/Div
Input
LMV3xx
VCC = ±2.5 V
RL = 2 kΩ
TA = −40°C
1 µs/Div
Figure 38
16
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
LMV321-Q1 SINGLE, LMV358-Q1 DUAL, LMV324-Q1 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS415E − JUNE 2003 − REVISED APRIL 2008
TYPICAL CHARACTERISTICS
INPUT CURRENT NOISE
vs
FREQUENCY
INPUT CURRENT NOISE
vs
FREQUENCY
0.50
0.80
VCC = 5 V
0.45
Input Current Noise − pA/ Hz
Input Current Noise − pA/ Hz
VCC = 2.7 V
0.60
0.40
0.20
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.00
10 Hz
100 Hz
1 kHz
0.00
10 kHz
10 Hz
Frequency
100 Hz
1 kHz
10 kHz
Frequency
Figure 39
Figure 40
INPUT VOLTAGE NOISE
vs
FREQUENCY
200
Input Voltage Noise − nV/ Hz
180
160
140
120
100
80
VCC = 2.7 V
60
40
VCC = 5 V
20
10 Hz
100 Hz
1 kHz
10 kHz
Frequency
Figure 41
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
17
LMV321-Q1 SINGLE, LMV358-Q1 DUAL, LMV324-Q1 QUAD
LOW-VOLTAGE RAIL-TO-RAIL OUTPUT
OPERATIONAL AMPLIFIERS
SLOS415E − JUNE 2003 − REVISED APRIL 2008
TYPICAL CHARACTERISTICS
THD + N
vs
FREQUENCY
THD + N
vs
FREQUENCY
THD − %
1.000
10.000
VCC = 2.7 V
RL = 10 kΩ
AV = 1
VO = 1 VPP
VCC = 2.7 V
RL = 10 kΩ
AV = 10
VO = 1 VPP
1.000
THD − %
10.000
LMV3xx
0.100
0.100
LMV3xx
0.010
0.010
0.001
0.001
10
100
1K
10K
10
100K
Frequency − Hz
Figure 42
Figure 43
THD + N
vs
FREQUENCY
10.000
10K
100K
THD + N
vs
FREQUENCY
10.000
VCC = 5 V
RL = 10 kΩ
AV = 1
VO = 1 VPP
VCC = 5 V
RL = 10 kΩ
AV = 10
VO = 2.5 VPP
1.000
THD − %
THD − %
1.000
1K
100
Frequency − Hz
0.100
0.100
0.010
0.010
LMV3xx
LMV3xx
0.001
0.001
10
18
100
1K
10K
10
100K
100
1K
Frequency − Hz
Frequency − Hz
Figure 44
Figure 45
•
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
POST OFFICE BOX 1443 HOUSTON, TEXAS 77251−1443
•
10K
100K
PACKAGE OPTION ADDENDUM
www.ti.com
20-Oct-2011
PACKAGING INFORMATION
Orderable Device
Status
(1)
Package Type Package
Drawing
Pins
Package Qty
Eco Plan
(2)
Lead/
Ball Finish
MSL Peak Temp
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
LMV321QDBVRQ1
ACTIVE
SOT-23
DBV
5
3000
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
LMV324IDRG4Q1
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
LMV324IDRQ1
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
LMV324IPWRG4Q1
ACTIVE
TSSOP
PW
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
LMV324IPWRQ1
ACTIVE
TSSOP
PW
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
LMV324QDQ1
OBSOLETE
SOIC
D
14
LMV324QDRG4Q1
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
LMV324QDRQ1
ACTIVE
SOIC
D
14
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
LMV324QPWRG4Q1
ACTIVE
TSSOP
PW
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
LMV324QPWRQ1
ACTIVE
TSSOP
PW
14
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
LMV358IDRG4Q1
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
LMV358IDRQ1
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
LMV358IPWRG4Q1
ACTIVE
TSSOP
PW
8
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
LMV358IPWRQ1
ACTIVE
TSSOP
PW
8
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
TBD
Call TI
Call TI
LMV358QDQ1
OBSOLETE
SOIC
D
8
LMV358QDRG4Q1
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
LMV358QDRQ1
ACTIVE
SOIC
D
8
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
Addendum-Page 1
Call TI
Samples
(Requires Login)
LMV321IDBVRQ1
TBD
(3)
Call TI
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device
20-Oct-2011
Status
(1)
Package Type Package
Drawing
Pins
Package Qty
Eco Plan
(2)
TBD
Lead/
Ball Finish
Call TI
MSL Peak Temp
(3)
Samples
(Requires Login)
LMV358QPWQ1
OBSOLETE
TSSOP
PW
8
Call TI
LMV358QPWRG4Q1
ACTIVE
TSSOP
PW
8
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
LMV358QPWRQ1
ACTIVE
TSSOP
PW
8
2000
Green (RoHS
& no Sb/Br)
CU NIPDAU Level-1-260C-UNLIM
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF LMV321-Q1, LMV324-Q1, LMV358-Q1 :
• Catalog: LMV321, LMV324, LMV358
NOTE: Qualified Version Definitions:
Addendum-Page 2
PACKAGE OPTION ADDENDUM
www.ti.com
20-Oct-2011
• Catalog - TI's standard catalog product
Addendum-Page 3
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated