ALUMINUM ELECTROLYTIC CAPACITORS NR Screw Terminal Type series Load life of 5000 hours application of rated ripple current at 85°C . Extended rarge up to φ100 × 250L size. Available for adapted to the RoHS directive (2002/95/EC). NT High Temperature NX NR High ripple, Longer life High Voltage NW Specifications Item Performance Characteristics Category Temperature Range – 40 ~ +85°C (10~100V) , – 25 ~ +85°C (160~250V) Rated Voltage Range 10 ~ 250V Rated Capacitance Range 1000 ~ 2200000µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 5 minutes' application of rated voltage, leakage current is not more than 3 CV (µA) or 5 mA, whichever is smaller (at 20°C) . [C:Rated Capacitance (µF) , V:Voltage(V)] φD 10 0.6 0.7 0.9 1.0 0.9 1.2 1.6 1.6 2.0 2.4 80 ~100 120 70 ~100 51 tan δ (MAX) V L 35 63.5 76.2 90 100 120~140 100 120~140 100 120~140 140~220 250 16 0.4 0.55 0.6 0.8 — 0.75 — 1.1 1.5 1.5 25 0.35 0.4 0.45 0.5 — 0.65 — 0.75 1.0 1.0 35 0.3 0.3 0.35 0.4 0.5 — 0.65 0.75 0.9 0.9 50 0.25 0.25 0.25 0.3 0.35 — — 0.55 0.75 0.75 63 0.25 0.25 0.25 0.25 0.3 0.3 — 0.5 0.6 0.6 100 0.12 0.15 0.15 0.15 — 0.2 — 0.3 0.3 0.3 80 0.2 0.2 0.2 0.2 0.25 0.3 — 0.35 0.4 0.4 160~250 0.15 0.15 0.15 0.15 0.2 0.2 0.2 0.2 0.25 0.25 Measurement frequency: 120Hz, Temperature : 20°C Measurement frequeny : 120Hz 10~100 Z – 40°C / Z+20°C 12 Rated voltage(V) Stability at Low Temperature Impedance ratio ZT/Z20(MAX.) 160~250 Z – 25°C / Z+20°C 8 Endurance After an application of DC voltage (in the range of rated DC voltage even after over-lapping the specified rated ripple current) for 5000 hours at 85°C, capacitors meet the characteristic requirements listed at right. Capacitance change tan δ Leakage current Within ±15% of initial value 175% or less of initial specified value Initial specified value or less Shelf Life After storing the capacitors under no load at 85°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the requirements listed at right. Capacitance change tan δ Leakage current Within ±20% of initial value 175% or less of initial specified value Initial specified value or less Marking Printed with black color letter on light blue sleeve. Drawing Type numbering system (Example : 250V 2200µF) 1 2 3 4 5 6 7 8 9 10 11 12 LNR 2 E 2 2 2 MSE f 35 Screw terminal type Hexagenal headed bolt (M5) Bottom plate f Sleeve 10 3.5 m + 45±1 30¡ 12.7±1 Pressure relief vent 35 +2MAX Mounting bracket Configuration ( 35) brackets Capacitance tolerance (±20%) CodeNless 2-leg No brackets Rated Capacitance (2200 F) 51~ 90) Rated voltage (250V) Code less 3-leg brackets B 2-leg brackets Series name N No brackets Type 100) Code less 3-leg brackets N No brackets 7 (f f (f 10 24 15±0.5 L +3MAX. Configuration Cr ( ) Plating (RoHS compliant) III 6±1 29±1 SE Cr ( ) Plating VI SM Resin bushing available upon request. Please contact to us if PVCless products are required. Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS NR series Screw terminal types for f 51 and larger Hexagenal headed bolt Bottom plate Sleeve Resin bushing Hexagenal headed bolt Pressure relief vent φ4.5 83.7 D + 2 MAX. W±1 Pressure relief vent 31.8±1 Sleeve Method to mount resin bushing (φ76.2) ( Apply to L=150 or more) ¡ 120 88.2 Bottom plate S h MAX. L+3MAX. ±1 U S Method to mount resin bushing (φ90) (Apply to L=150 or more) Pressure relief vent 5 Sleeve Resin bushing 30¡ 7 65.7 3-leg brackets for φ90 capacitors have different Hexagenal headed bolt ° 120 Pressure relief vent 31.8±1 Bottom plate 102.5 P A ±2 T Note: Capacitors with body dia. φ51 or larger are furnished with 3-leg brackets shown above as standard. If these capacitors are preferred to have 2P leg brackets as shown right, add "B" in the 12th digit of type numbering system. ∗B 105 120 74.4 U 95.5 L+ T P ±2 A ±2 B H ±1 L+3MAX. 57.5 63.5 φ6.0 hole shapes from the ordinary ones as illustrated below. 5 P 7 Dimension of terminal pitch (W) and length (R) and Nominal dia.of bolt φD W R 51.5 22.0 6 63.5 28.6 6 76.2 31.8 6 90.5 31.8 6 100.50 41.5 10 α 3 3 3 3 4 (mm) Nominal dia.of bolt M5 M5 M5 M5 M8 Dimensions of mounting bracket Leg Shape φD (mm) 3-Legs 2-Legs 51 63.5 76.2 90 100 51 63.5 76.2 90 P 32.5 38.1 44.5 50.8 56.3 33.2 40.5 46.5 53 A 38.5 43 49.2 58.5 62 40 46.5 53 59 T 7.5 8.0 7.0 8.0 8.0 6.0 7.0 6.0 6.0 S 5.0 5.0 5.0 5.0 5.0 4.5 4.5 4.5 4.5 U 12 14 14 18 16 14 14 14 14 60 60 60 60 60 30 30 30 30 H 20 25 30 35 36 25 35 35 35 h 15 20 24 25 30 15 20 20 20 Symbol ° Dimensions V(Code) Surge Cap.(µF) Code 333 33000 473 47000 683 68000 104 100000 154 150000 224 220000 334 330000 474 470000 684 680000 105 1000000 155 1500000 225 2200000 Case size 10V (1A) 13V φ D × L (mm) 35 × 80 35 × 80 35 × 100 51 × 80 51 × 100 63.5 × 100 63.5 × 120 76.2 × 120 90 × 170 90 × 220 100 × 250 Rated ripple 6.0 7.2 8.8 10.7 13.0 15.9 19.0 22.8 27.7 33.9 41.1 Case size 16V (1C) 20V φ D × L (mm) 35 × 80 35 × 100 35 × 120 51 × 100 51 × 120 63.5 × 120 76.2 × 120 90 × 170 90 × 220 100 × 250 Rated ripple 6.4 7.9 10.6 11.5 15.6 25.1 30.5 33.0 36.0 39.7 25V (1E) 32V Case size φ D × L (mm) 35 × 80 35 × 100 35 × 120 51 × 100 51 × 120 63.5 × 120 76.2 × 120 90 × 170 90 × 220 100 × 250 Rated ripple 6.2 8.2 9.4 12.0 15.3 18.9 24.8 30.8 33.3 36.4 Rated Ripple (Arms) at 85°C 120Hz CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS NR series Dimensions V(Code) Surge Cap.(µF) Code 103 10000 153 15000 223 22000 333 33000 473 47000 683 68000 104 100000 154 150000 224 220000 334 330000 474 470000 684 680000 105 1000000 V(Code) Surge Cap.(µF) Code 2200 222 3300 332 4700 472 6800 682 10000 103 15000 153 22000 223 33000 333 47000 473 68000 683 100000 104 150000 154 220000 224 330000 334 V(Code) Surge Cap.(µF) Code 1000 102 1500 152 2200 222 3300 332 4700 472 6800 682 10000 103 15000 153 22000 223 33000 333 47000 473 68000 683 Case size 35V (1V) 44V φ D × L (mm) Rated ripple 35 × 80 35 × 120 51 × 80 51 × 120 63.5 × 100 76.2 × 100 76.2 × 140 90 × 170 90 × 220 100 × 250 Case size 35 × 80 35 × 100 51 × 70 51 × 90 51 × 100 63.5 × 100 76.2 × 120 90 × 140 90 × 170 90 × 220 100 × 250 6.2 8.2 9.3 13.6 14.5 16.8 24.8 32.6 35.2 38.5 80V (1K) 100V φ D × L (mm) Rated ripple 35 × 80 35 × 120 51 × 80 51 × 120 63.5 × 100 63.5 × 140 76.2 × 140 90 × 170 90 × 220 100 × 250 Case size Case size Case size 35 × 80 35 × 100 51 × 80 51 × 100 51 × 140 63.5 × 120 76.2 × 120 90 × 140 90 × 170 90 × 220 100 × 250 2.9 3.5 4.8 6.3 7.3 9.8 13.0 15.9 19.5 20.9 22.6 Rated ripple 5.4 6.1 7.0 8.6 11.0 14.2 18.6 20.3 25.3 33.2 36.0 100V (2A) 125V φ D × L (mm) Rated ripple 35 × 80 35 × 100 35 × 120 51 × 80 51 × 100 51 × 140 63.5 × 140 76.2 × 140 90 × 170 90 × 220 100 × 250 4.2 6.0 6.5 9.2 12.7 15.5 21.3 26.5 28.9 31.8 200V (2D) 250V φ D × L (mm) Rated ripple 50V (1H) 63V φ D × L (mm) 3.8 4.5 5.3 6.0 6.8 10.0 14.4 18.2 22.1 27.0 32.7 63V (1J) 79V Case size φ D × L (mm) 35 × 80 35 × 100 35 × 120 51 × 80 51 × 120 63.5 × 100 63.5 × 140 76.2 × 140 90 × 170 90 × 220 100 × 250 Rated ripple 4.1 5.5 7.1 8.8 11.7 15.0 20.8 26.0 28.3 31.2 33.6 160V (2C) 200V Case size φ D × L (mm) Rated ripple 35 × 80 3.2 35 × 120 4.7 51 × 80 5.0 51 × 100 6.4 63.5 × 100 9.1 76.2 × 100 12.0 76.2 × 140 16.9 90 × 140 19.2 90 × 170 20.6 90 × 220 22.3 100 × 250 24.4 250V (2E) 300V Case size φ D × L (mm) Rated ripple 35 × 80 2.4 35 × 100 3.0 51 × 80 4.0 51 × 100 5.4 63.5 × 100 7.3 63.5 × 120 8.9 76.2 × 120 11.8 90 × 140 16.4 90 × 170 17.9 90 × 220 19.7 100 × 250 21.2 Rated Ripple (Arms) at 85°C 120Hz Frequency coefficient of rated ripple current Frequency (Hz) Coeff. 10~100V 160~250V 60 0.90 0.88 120 1.00 1.00 360 1.08 1.08 1k 1.15 1.15 10k~ 1.15 1.20 CAT.8100V