LO10-00B24E 10W,AC-DC switching power supply LO10 series -- is a open frame switching power supply offered by MORNSUN. It features universal input voltage, taking both DC and AC input voltage, low power consumption, high efficiency, high reliability, safer isolation. It offers good EMC performance, meets IEC61000, and widely used in industrial, office and civil RoHS applications, especially in electricity applications. MODEL SELECTION FEATURES 1、 Universal Input :85～264VAC，50/60Hz 2、 Regulated output ,low ripple and noise LO10-00B24E 3、 Over-current protection, short circuit protection and over-voltage protection 4、 EMC：IEC61000 Class 4 5、 Open frame Sp e cia l for Power Systems Ou tpu t Vo lta g e O u tpu t Style In pu t Vo lta ge Iso latio n Vo lta g e R a ted Po w e r Pa ckag e Style Pro du ct Se rie s MODEL Output voltage/ Model Input voltage Output Power Output current Ripple & Noise(max.) Efficiency (typ.) (Vo/Io) LO10-00B24E 85-264V AC 10W 90-370V DC 24V/0.42A 240 mV 70% INPUT SPECIFICATIONS Input voltage range 85-264VAC or 90-370VDC Input frequency range 47-63Hz @ 110VAC 0.21A, typ. @ 240VAC 0.13A, typ. @ 110VAC 15A, typ. @ 240VAC 30A, typ. @ 110VAC 0.2mA(typ.)/0.75 mA(max.) @ 240VAC 0.4mA(typ.)/0.75mA(max.) @230VAC 0.8W typ. Input current Inrush current Leakage current Standby power consumption The copyright and authority for the interpretation of the products are reserved by MORNSUN Specifications subject to change without notice LO10-00B24E A/0-2011 Page 1 of 4 OUTPUT SPECIFICATIONS Output voltage stability ±2% Input variation ±2% Load variation (0%-100%) ±2% Minimum load 0 Output low ripple & noise（p-p）(20MHz bandwidth) 120mV typ. Max capacitive load 2200μF Short circuit protection Continuous, and auto-recovery Over current protection ＞120% Io auto-recovery Output over voltage protection 30V TVS clamp 240mV max. Note: Test ripple and noise by “parallel cable” method. COMMON SPECIFICATIONS Operating temperature -10～+70℃ ( Power derating above 50 ℃ ) Storage temperature -25℃～+75℃ Operating humidity & altitude 5%-85% （no dewing in device），3000m Storage humidity & altitude 5%-95% （no dewing in device），9000m Temperature Humidity & Altitude Temperature Drift <±0.02%/℃ Switching Frequency 100kHz Delay time <1s Hold-up time 20ms(typ.) @Vin=220VAC，Rated load I/O-isolation voltage EMC Compliance Isolation resistance >100MΩ @ 25℃，45-70%Rh，500VDC Isolation voltage Input-ground:2KVAC/1Min; Output-ground:1KVAC/1Min; (Leakage current 10mA) Input-Output:2KVAC/1Min. Electrostatic discharge IEC 61000-4-2 4kV（touch）8kV（air） Electrical fast transient IEC 61000-4-4 level 4 Surge IEC 61000-4-5 level 4 Radio frequency magnetic field IEC 61000-4-3 level 4 Power-frequency magnetic field IEC 61000-4-8 level 4 Voltage dips, short interruptions and voltage variations immunity IEC 61000-4-11 Vibration GB/T2423.10-2008 Impact GB/T2423.5-1995 Short interruptions 0% 0.5 cycle Voltage sag 70% 10 cycle Mechanical properties Safety class CLASS I Install PCB Cooling Free air convection MTBF >300,000h @25℃ Weight about 50 g The copyright and authority for the interpretation of the products are reserved by MORNSUN Specifications subject to change without notice LO10-00B24E A/0-2011 Page 2 of 4 TYPICAL EFFICIENCY CURVE LO10-00B24E Input Voltage & Efficiency curve 100%Load LO10-00B24E Load & Efficiency curve Vin=240Vac 80% 80% 70% Efficiency(%) Efficiency(%) 75% 65% 60% 55% 50% 78% 76% 74% 45% 40% 72% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 85 120 264 Input Voltage(Vac) Load(%) INPUT VOLTAGE AND LOAD DIAGRAM TEMPERATURE AND LOAD DIAGRAM Load (%) LO05系列温度与负载特性曲线图 100 80 90 60 80 Load 负载(%) 100 40 20 85 240 100 70 60 50 264 240 40 Input Voltage(Vac) -10 50 60 70 温度(℃) Temperature( ℃) *Note：For the input DC voltage, DC voltage and AC voltage relationship: Vdc=1.414Vac-20Vdc。 PARALLEL LINES MEASURE Copper sheet Fuse L L +Vo AC-DC N N C1 C2 Load Connect Oscillograph Probe -Vo 25. 4mm C1:10μF 25. 4mm C2 :0.1μF The copyright and authority for the interpretation of the products are reserved by MORNSUN Specifications subject to change without notice LO10-00B24E A/0-2011 Page 3 of 4 OUTLINE AND DIMENSIONS +0.80 +0.80 5 2 4 2 5 3 Φ1.30 [0.051] Note: grid:2.54*2.54 mm[0.1*0.1inch] . (Bottom View) 4 FOOTPRINT DETAILS 1 4.00 [0.157] 54.00 [2.126] 62.00 [2.441] 12.50[0.492] 17.50 [0.689] 17.50 [0.689] 5.00[0.197] +0.031 [1.772 + 0 . 00 0 20.00 [0.787] Φ1.00[0.039]±0.10[0.004] Φ1.80[0.071]±0.10[0.004] 3 45.00 [1.772] 45.00 + 0. 00 0.50[0.020] ] 1 3.70[0.146] Max27.00[1.063] Max22.50[0.446] 62.00+ 0 . 0 0 +0.031 [2.441+ 0 . 0 0 0 ] 1 FG 2 AC( L) 3 AC(N) 4 -Vo 5 +Vo Note: Unit: mm[inch] Pin tolerances:±0.25 mm[± 0.010inch] General tolerances:±0.50 mm[± 0.020inch] 0.020inch black MYLAR insulating sheet material PACKAGE DIAGRAM Inner packaging dimensions： L*W*H=355*345*100mm Packaging quantity：48 PCS Outer packaging dimensions： L*W*H = 390*360*245mm Packaging quantity：96 PCS Note: 1. All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. 2. Only typical models listed, other models may be different, please contact our technical person for more details. MORNSUN Science & Technology Co.,Ltd. Address: No. 5, Kehui St. 1, Kehui development center, Science Ave., Guangzhou Science City, Luogang district, Guangzhou,P.R.China. Tel: 86-20-28203030 Fax:86-20-28203068 Http://www.mornsun-power.com The copyright and authority for the interpretation of the products are reserved by MORNSUN Specifications subject to change without notice LO10-00B24E A/0-2011 Page 4 of 4