PD104SM1 Version : 1.0 TECHNICAL

P-511-544(V :1)
P D104S M1
V ers ion : 1.0
T E C HNIC AL S P E C IF IC AT ION
MODE L NO. : P D104S M1
T he content of this information is s ubject to be changed without notice.
P leas e contact P V I or its agent for further information.
C us tomer•s C onfirmation
C us tomer
Date
FOR MORE INFORMATION:
AZ DISPLAYS, INC.
75 COLUMBIA, ALISO VIEJO, CA 92656
Http://www.AZDISPLAYS.com
By
P V I•s C onfirmation
C onfirmed B y
P repared B y
T he information contained herein is the exclus ive property of P rime V iew International C o., Ltd. and s hall not be
dis tributed, reproduced, or dis clos ed in whole or in part without prior written permis s ion of P rime V iew International C o.,
Ltd.
P age:1 V er:001
1/17
P-511-544(V:1)
PD104SM1
Revision History
Rev. Issued Date
0.1 Jul. 07, 2008
0.2 Sep. 19, 2008
Eng.
‫࣑ܦ‬ᙤ
‫࣑ܦ‬ᙤ
0.3
0.4
‫࣑ܦ‬ᙤ
‫࣑ܦ‬ᙤ
Oct. 16, 2008
Nov. 19, 2008
Revised
Contents
Preliminary
Add weight of LCD module
Add gamma voltage
Modify 8. Block Diagram
Modify 9.Interface Timing
Update lamp current from 5.0mA(typ.) to 5.5mA(typ.)
Brightness (min.) from 195(cd/m2) to 185(cd/m2)
7. Electrical Characteristics
add IDD(typ.) = 260mA
add Note 7-3ΚThe minimum life of CCFL = 20,000hrs
Delete 7-3) Gamma correction voltage
1.0
Nov. 21, 2008
‫࣑ܦ‬ᙤ
10. Optical Characteristics
modify response time
Tr(typ.)=10ms , Tr(max.)=15ms
Tf(typ.)=15ms , Tf(max.)=25ms
New
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:2 Ver:001
2/17
P-511-544(V:1)
PD104SM1
TECHNICAL
SPECIFICATION
CONTENTS
NO.
ITEM
PAGE
1
2
3
4
5
6
7
8
9
10
11
12
13
Cover
Revision History
Contents
Application
Features
Mechanical Specifications
Mechanical Drawing of TFT-LCD module
Input / Output Terminals
Absolute Maximum Ratings
Electrical Characteristics
Block Diagram
Interface Timing
Optical Characteristics
1
2
3
4
4
4
5
7
8
8
10
11
12
15
16
17
Handling Cautions
Reliability Test
Packing Diagram
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:3 Ver:001
3/17
P-511-544(V:1)
PD104SM1
1. Application
This data sheet applies to a color TFT LCD module, PD104SM1.
PD104SM1 module applies to OA products, which require high quality flat panel display. If
you must use in severe reliability environment, please don’t extend over PVI’s reliability test
conditions.
Prime View assume no responsibility for any damage resulting from the use of the device
which dose not comply with the instructions and the precautions in these specification
sheet.
2. Features
. SVGA (800*600 pixels) resolution
. Amorphous silicon TFT LCD panel with CCFL backlight
. Pixel in stripe configuration
. Thin and light weight
. Display ColorsΚ262K colors
. InterfaceΚLVDS 6 bit
3. Mechanical Specifications
Parameter
Screen Size
Display Format
Display Colors
Active Area
Pixel Pitch
Pixel Configuration
Outline Dimension
Weight
Back-light
Surface treatment
Display mode
Gray scale inversion direction
Specifications
10.4 (diagonal)
800ͪ(R,G,B)ͪ600
262K
211.2 (H)ͪ158.4 (V)
0.264(H)ͪ0.264(V)
Stripe
236.0 (W)Ø176.9 (H)Ø5.6 (D) (typ.)
288²15
CCFL
Anti-Glare(3H)
Normally White
6 o’clock
(ref to Note10-1)
Unit
inch
dot
mm
mm
mm
g
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:4 Ver:001
4/17
P-511-544(V:1)
PD104SM1
4. Mechanical Drawing of TFT-LCD Module
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:5 Ver:001
5/17
P-511-544(V:1)
PD104SM1
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:6 Ver:001
6/17
P-511-544(V:1)
PD104SM1
5. Input / Output Terminals
5-1) LVDS interface
Connector typeΚHIROSE DF19K-20P-1H(56)
Pin No
1
Symbol
I/O
Description
VDD
P
Power Supply
2
VDD
P
Power Supply
3
GND
P
Ground
4
GND
P
Ground
5
IN0-
I
LVDS receiver negative signal channel 0
Note 5-1
6
IN0+
I
LVDS receiver positive signal channel 0
Note 5-1
7
GND
P
Ground
8
IN1-
I
LVDS receiver negative signal channel 1
Note 5-1
9
IN1+
I
LVDS receiver positive signal channel 1
Note 5-1
10
GND
P
Ground
-
11
IN2-
I
LVDS receiver negative signal channel 2
Note 5-1
12
IN2+
I
LVDS receiver positive signal channel 2
Note 5-1
13
GND
P
Ground
-
14
CLK-
I
LVDS receiver negative signal clock
Note 5-1
15
CLK+
I
LVDS receiver positive signal clock
Note 5-1
16
GND
P
Ground
-
17
NC
-
No connection
-
18
NC
-
-
19
GND
P
No connection
Ground
20
GND
P
Ground
-
Remark
-
IΚinput pin
PΚPower/GND
Note 5-1ΚData mapping as followsΚ
Figure 5-1 Input signal data mapping
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:7 Ver:001
7/17
P-511-544(V:1)
PD104SM1
5-2) CN2 (CCFL connector)
Symbol
I/O
Pin No
1
VL1
P
2
VL2
P
Description
CCFL power supply (high voltage)
Remark
Pink
CCFL power supply (GND)
White
6. Absolute Maximum Ratings:
Ta=25к
Parameters
Symbol
MIN.
Power Voltage
VDD
-0.3
Input Voltage
VIN
-0.3
Operating Temperature
TOP
-20
Storage Temperature
TST
-30
Note 6-1ΚVIN represent IN0²-IN1²-IN2²-CLK²
MAX.
5.0
5.0
70
80
Unit
V
V
ʚ
ʚ
Remark
Note 6-1
7. Electrical Characteristics
Κ
7-1) LVDS Module Electrical CharacteristicsΚ
Note 7-1
260
Note 7-2
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:8 Ver:001
8/17
P-511-544(V:1)
PD104SM1
Figure 7-1 LVDS DC timing diagram
Note 7-1ΚThe value may be different for different LCM.
Note 7-2ΚTo test the current dissipation, using the “color bar” testing pattern shown as belowΚ
Figure 7-2 Current dissipation testing pattern
7-2) Backlight Unit
Note 7-6
Note 7-3ΚThe minimum life of CCFL = 20,000hrs
Note 7-4ΚIn order to satisfy the quality of B/L, no matter use what kind of inverter, the output lamp
current must between Min. and Max. to avoid the abnormal display image caused by B/L.
Note 7-5ΚThe waveform of lamp driving voltage should be as closed to a perfect sine wave as
possible.
Note 7-6ΚThe” Max “ of “starting voltage ” means the minimum voltage of inverter to turn on the
CCFL, and it should be applied to the lamp for more than 1 second to start up. Otherwise the lamp
may not be turned on.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:9 Ver:001
9/17
P-511-544(V:1)
PD104SM1
8. Block Diagram
PD104SM1
800 X 600(SVGA)
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:10 Ver:001
10/17
P-511-544(V:1)
PD104SM1
9. Interface Timing
9-1) LVDS input timing
VDD
Figure 9-1 input signal data timing
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:11 Ver:001
11/17
P-511-544(V:1)
PD104SM1
9-2) LVDS INTERFACE POWER ON/OFF
VDD
-
VDD
VDD
Figure 9-2 Interface power on/off sequence
10. Optical Characteristics
10-1) Specification:
Parameter
Symbol
Ӱ
Horizontal
Viewing
Angle
Vertical
Ӱ(to 6
o’clock)
Ӱ(to 12
o’clock)
CR
Condition
CRЊ10
MIN.
TYP.
MAX.
55
65
-
Ta=25к
Unit Remarks
deg
55
65
-
deg
35
45
-
deg
300
-
400
10
15
-
Note 10-2
ms
Note 10-3
Brightness
L
Ӱ=0°
185
230
15
25
-
Luminance Uniformity
U
Ӱ=0°
70
80
-
Contrast Ratio
Response time
Rise
Tr
Fall
Tf
White Chromaticity
Red Chromaticity
Green Chromaticity
Blue Chromaticity
NTSC
Ӱ=0°
25к
x
0.261 0.311 0.361
y
0.280 0.330 0.380
x
0.550 0.600 0.650
y
x
Backlight is on
%
x
0.097 0.147 0.197
y
0.065 0.115 0.165
-
50
-
Note 10-6
Note 10-5
Note 10-4
0.250 0.300 0.350
0.517 0.567 0.617
(x,y)
cd/ф Note 10-5
0.297 0.347 0.397
y
Note 10-1
%
Note 10-4
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:12 Ver:001
12/17
P-511-544(V:1)
PD104SM1
Note 10-1ΚThe definitions of viewing angles are as follow
Ә
Ә
Note 10-2ΚThe definition of contrast ratio CR =
Luminance at White Pattern
Luminance at Black Pattern
Note 10-3ΚDefinition of Response Time Tr and Tf:
W hite
Black
W hite
100%
90%
Brightness
10%
0%
Tr
Tf
Note 10-4ΚDefinition of color chromaticityΰCIE1931α
Color coordinates measured at center point of LCD.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:13 Ver:001
13/17
P-511-544(V:1)
PD104SM1
Note 10-5ΚAll optical measurements shall be performed after backlight being turned-on for 5
minutes. The optical characteristics shall be measured in dark room. The measuring
configuration shows as following figure.
Photometer (TOPCON BM-5A or BM7 fast)
500 mm +/- 50 mm
Field = 1°
TFT-LCD module
Optical characteristics measuring configuration
Note 10-6ΚThe uniformity of LCD is defined as
U=
The Minimum Brightness of the 9 testing Points
The Maximum Brightness of the 9 testing Points
Luminance meterΚBM-7 fast (TOPCON)
Measurement distanceΚ500 mm +/- 50 mm
Ambient illuminationΚdark room
Measuring directionΚPerpendicular to the surface of module
The test pattern is white
1/6
2/6
2/6
1/6
1/6
2/6
2/6
1/6
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:14 Ver:001
14/17
P-511-544(V:1)
PD104SM1
11. Precautions for use of LCD modules
11-1) Handling Precautions
a. The display panel is made of glass. Do not subject it to a mechanical shock by dropping it
from a high place, etc.
b. If the display panel is damaged and the liquid crystal substance inside it leaks out, be sure
not to get any in your mouth, if the substance comes into contact with your skin or clothes,
promptly wash it off using soap and water.
c. Do not apply excessive force to the display surface or the adjoining areas since this may
cause the color tone to vary.
d. The polarizer covering the display surface of the LCD modules is soft and easily scratched.
Handle this polarizer carefully.
e. If the display surface is contaminated, breathe on the surface and gently wipe it with a soft
dry cloth. If still not completely clear, moisten cloth with one of the following solventsΚ
ЁIsopropyl alcohol
ЁEthyl alcohol
f. Solvents other than those mentioned above may damage the polarizer. Especially, do not
use the followingΚ
ЁWater
ЁKetone
ЁAromatic solvents
g. Do not attempt to disassemble the LCD Module.
h. If the logic circuit power is off, do not apply the input signals.
I. To prevent destruction of the elements by static electricity, be careful to maintain an
optimum work environment.
11-2) Be sure to ground the body when handling the LCD Modules.
11-3) Tools required for assembly, such as soldering irons, must be properly ground.
11-4) To reduce the amount of static electricity generated, do not conduct assembly and other
work under dry conditions.
11-5) Please following the tear off direction as figure 11-1 to remove the protective film as slowly
as possible, so that electrostatic charge can be minimized.
11-6) Storage precautions
a. When storing the LCD modules, avoid exposure to direct sunlight or to the light of
fluorescent lamps.
b. The LCD modules should be stored under the storage temperature range. If the LCD
modules will be stored for a long time, the recommend conditions isΚ
TemperatureΚ0к~40к
Relatively humidityΚЉ80н
c. The LCD modules should be stored in the room without acid, alkali and harmful gas.
11-7) Transportation Precautions
a. The LCD modules should be no falling and violent shocking during transportation, and also
should avoid excessive press, water, damp and sunshine.
Figure 11-1 the way to peel off protective film
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:15 Ver:001
15/17
P-511-544(V:1)
PD104SM1
12. Reliability Test
No
Test Item
Test Condition
Remark
1 High Temperature Operation Test
Ta = +70к, 240 hrs
IEC60068-2-2,GB2423.2Ё89
2 Low Temperature Operation Test
Ta = -20к, 240 hrs
IEC60068-2-1,GB2423.1Ё89
3 High Temperature Storage Test
Ta = +80к, 240 hrs
IEC60068-2-2,GB2423.2Ё89
4 Low Temperature Storage Test
Ta = -30к, 240 hrs
IEC60068-2-1,GB2423.1Ё89
5
6
High Temperature & High Humidity Ta = +60к, 90%RH max, 240
Operation Test
hrs
Thermal Shock
-20к 30min ~ +70к 30min
(non-operation)
Change timeΚ5min, 100 Cycle
C=150pFΔR=330Ө
7
Electrostatic Discharge Test
(operation)
Vibration Test
8 (non-operation)
Shock Test
9 (non-operation)
10 Package Drop Test
11 Package Vibration Test
IEC60068-2-3,GB/T2423.2Ё2006
Start with cold temperature,
end with high temperature
IEC60068-2-14,GB2423.22
Ё87
IEC61000-4-2
GB/T17626.2Ё1998
Air = ±15KV
Contact = ±8KV
10 times/terminal
IEC60068-2-6
FrequencyΚ10 ~ 55 HZ
GB/T2423.10Ё1995
StrokeΚ1.5mm
SweepΚ10 Hz~55 Hz~10 Hz
Test period Κ 2 hours for each
direction of X, Y, Z (6 hours for
total)
IEC60068-2-27
GravityΚ80G 6ms
GB/T2423.5Ё1995
Direction: ̈́X, ̈́Y, ̈́Z
3 times for each direction
IEC60068-2-32
HeightΚ80cmΔ1 corner
GB/2423.8Ё1995
3 edgesΔ6 surfaces
IEC60068-2-34
Random VibrationΚ
0.015G*G/Hz for 5-200Hz
-6dB/Octave from 200-500Hz
2 hours for each direction of
X,Y,Z (6 hours for total)
TaΚambient temperature
NoteΚThe protective film must be removed before temperature test
[Criteria]
In the standard conditions, there is not display function NG issue occurred.
(IncludingΚline defect, no image) All the cosmetic specification is judged before the
reliability stress.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:16 Ver:001
16/17
P-511-544(V:1)
PD104SM1
13. Packing Diagram
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:17 Ver:001
17/17