STMICROELECTRONICS M74HC590RM13TR

M74HC590
8 BINARY COUNTER REGISTER
WITH 3 STATE OUTPUT
■
■
■
■
■
■
■
HIGH SPEED:
fMAX = 61 MHz (TYP.) at VCC = 6V
LOW POWER DISSIPATION:
ICC = 4µA(MAX.) at TA=25°C
HIGH NOISE IMMUNITY:
VNIH = V NIL = 28 % VCC (MIN.)
SYMMETRICAL OUTPUT IMPEDANCE:
|IOH| = I OL = 6mA (MIN) for QA ~ QH OUTPUT
|IOH| = IOL = 4mA (MIN) for RCO OUTPUT
BALANCED PROPAGATION DELAYS:
tPLH ≅ tPHL
WIDE OPERATING VOLTAGE RANGE:
VCC (OPR) = 2V to 6V
PIN AND FUNCTION COMPATIBLE WITH
74 SERIES 590
DESCRIPTION
The M74HC590 is an high speed CMOS 8-BIT
BINARY COUNTER REGISTER (3 STATE)
fabricated with silicon gate C2MOS technology.
This device contains an 8-bit binary counter that
feeds an 8-bit storage register. The storage
register has parallel outputs. Separate clocks are
provided for both the binary counter and storage
register. The binary counter features a direct clear
input CCLR and a count enable input CCKEN. For
DIP
SOP
TSSOP
ORDER CODES
PACKAGE
TUBE
DIP
SOP
TSSOP
M74HC590B1R
M74HC590M1R
T&R
M74HC590RM13TR
M74HC590TTR
cascading, a ripple carry output RCO is provided.
Expansion is easily accomplished by tying RCO of
the first stage to CCKEN of the second stage, etc.
Both the counter and register clocks are positive
edge triggered. If the user wishes to connect both
clocks together, the counter state will always be
one count ahead of the register. Internal circuitry
prevents clocking from the clock enable. All inputs
are equipped with protection circuits against static
discharge and transient excess voltage.
PIN CONNECTION AND IEC LOGIC SYMBOLS
August 2001
1/15
M74HC590
INPUT AND OUTPUT EQUIVALENT CIRCUIT
PIN DESCRIPTION
PIN No
SYMBOL
1, 2, 3, 4, 5,
6, 7, 15
11
12
QA to QH
13
9
14
10
8
16
RCK
RCO
G
CCLR
GND
VCC
CCK
CCKEN
NAME AND FUNCTION
Outputs
Counter Clock Input
Counter Clock Enable
Input
Register Clock Input
Ripple Carry Output
Output Enable Input
Counter Clear Input
Ground (0V)
Positive Supply Voltage
TRUTH TABLE
INPUTS
OUTPUT
G
RCK
CCLR
CCKEN
CCK
H
L
X
X
X
X
X
X
X
X
Q OUTPUTS DISABLE
Q OUTPUTS ENABLE
X
X
X
COUNTER DATA IS STORED INTO REGISTER
X
X
X
X
X
REGISTER STAGE IS NOT CHANGED
X
X
L
X
X
COUNTER CLEAR
X
X
H
L
X
X
H
L
X
X
H
H
ADVANCE ONE COUNT
NO COUNT
X
NO COUNT
X: Don’t Care
RCO = QA’·QB’·QC’·QD’·QE’·QF’·QG’·QH’ (QA’ to QH’ : INTERNAL OUTPUTS OF THE COUNTER)
LOGIC DIAGRAM
2/15
M74HC590
LOGIC DIAGRAM
This logic diagram has not be used to estimate propagation delays
3/15
M74HC590
TIMING CHART
4/15
M74HC590
ABSOLUTE MAXIMUM RATINGS
Symbol
VCC
Parameter
Supply Voltage
Unit
-0.5 to +7
V
-0.5 to VCC + 0.5
-0.5 to VCC + 0.5
V
DC Input Diode Current
± 20
mA
DC Output Diode Current
± 20
mA
DC Output Source Sink Current per Output PIN (RCO)
± 25
VI
DC Input Voltage
VO
DC Output Voltage
IIK
IOK
IO
Value
(QA - QH)
ICC or IGND DC VCC or Ground Current
PD
Power Dissipation
Tstg
Storage Temperature
TL
Lead Temperature (10 sec)
± 35
V
mA
± 70
mA
500(*)
mW
-65 to +150
°C
300
°C
Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is
not implied
(*) 500mW at 65 °C; derate to 300mW by 10mW/°C from 65°C to 85°C
RECOMMENDED OPERATING CONDITIONS
Symbol
VCC
Parameter
Supply Voltage
Value
Unit
2 to 6
V
VI
Input Voltage
0 to VCC
V
VO
Output Voltage
0 to VCC
V
Top
Operating Temperature
Input Rise and Fall Time
tr, tf
-55 to 125
°C
VCC = 2.0V
0 to 1000
ns
VCC = 4.5V
0 to 500
ns
VCC = 6.0V
0 to 400
ns
5/15
M74HC590
DC SPECIFICATIONS
Test Condition
Symbol
VIH
VIL
VOH
VOH
VOL
VOL
II
IOZ
ICC
6/15
Parameter
High Level Input
Voltage
Low Level Input
Voltage
High Level Output
Voltage (for RCO
Output)
High Level Output
Voltage (for QA to
QH Outputs)
Low Level Output
Voltage (for RCO
Output)
Low Level Output
Voltage (for QA to
QH Outputs)
Input Leakage
Current
High Impedance
Output Leakage
Current
Quiescent Supply
Current
Value
TA = 25°C
VCC
(V)
Min.
2.0
4.5
6.0
2.0
4.5
6.0
Typ.
Max.
1.5
3.15
4.2
-40 to 85°C
-55 to 125°C
Min.
Min.
Max.
1.5
3.15
4.2
0.5
1.35
1.8
Max.
1.5
3.15
4.2
0.5
1.35
1.8
V
0.5
1.35
1.8
2.0
IO=-20 µA
1.9
2.0
1.9
1.9
4.5
IO=-20 µA
4.4
4.5
4.4
4.4
6.0
IO=-20 µA
5.9
6.0
5.9
5.9
4.5
IO=-4.0 mA
4.18
4.31
4.13
4.10
6.0
IO=-5.2 mA
5.68
5.8
5.63
5.60
2.0
IO=-20 µA
1.9
2.0
1.9
1.9
4.5
IO=-20 µA
4.4
4.5
4.4
4.4
6.0
IO=-20 µA
5.9
6.0
5.9
5.9
4.5
IO=-6.0 mA
4.18
4.31
4.13
4.10
5.68
V
6.0
2.0
IO=20 µA
0.0
0.1
0.1
0.1
4.5
IO=20 µA
0.0
0.1
0.1
0.1
6.0
IO=20 µA
0.0
0.1
0.1
0.1
4.5
IO=4.0 mA
0.17
0.26
0.33
0.40
6.0
IO=5.2 mA
0.18
0.26
0.33
0.40
2.0
IO=20 µA
0.0
0.1
0.1
0.1
4.5
IO=20 µA
0.0
0.1
0.1
0.1
5.63
V
V
IO=-7.8 mA
5.8
Unit
5.60
V
6.0
IO=20 µA
0.0
0.1
0.1
0.1
4.5
IO=6.0 mA
0.17
0.26
0.33
0.40
6.0
IO=7.8 mA
0.18
0.26
0.33
0.40
6.0
VI = VCC or GND
± 0.1
±1
±1
µA
6.0
VI = VIH or VIL
VO = VCC or GND
± 0.5
±5
± 10
µA
6.0
VI = VCC or GND
4
40
80
µA
V
M74HC590
AC ELECTRICAL CHARACTERISTICS (CL = 50 pF, Input tr = tf = 6ns)
Test Condition
Symbol
Parameter
tTLH tTHL Output Transition
Time
tTLH tTHL Output Transition
Time (RCO)
tPLH tPHL Propagation Delay
Time
(CCK - RCO)
tPLH
Propagation Delay
Time
(CCLR - RCO)
tPLH tPHL Propagation Delay
Time
(RCK - Q)
tPZL tPZH High Impedance
Output Enable
Time
tPLZ tPHZ High Impedance
Output Disable
Time
fMAX
Maximum Clock
Frequency
tW(L)
tW(H)
Minimum Pulse
Width (CCK, RCK)
tW(L)
Minimum Pulse
Width (CCLR)
ts
ts(H)
th
Minimum Set-up
Time (CCKEN CCK)
Minimum Set-up
Time (CCK - RCK)
Minimum Hold
Time
VCC
(V)
2.0
4.5
6.0
2.0
4.5
6.0
2.0
4.5
6.0
2.0
4.5
6.0
2.0
4.5
6.0
2.0
4.5
6.0
2.0
4.5
6.0
2.0
4.5
6.0
2.0
4.5
6.0
2.0
4.5
6.0
2.0
4.5
6.0
2.0
4.5
6.0
2.0
4.5
6.0
2.0
4.5
6.0
2.0
4.5
6.0
Value
TA = 25°C
CL
(pF)
Min.
50
50
50
50
50
150
50
RL = 1 KΩ
150
RL = 1 KΩ
50
RL = 1 KΩ
50
50
50
50
50
50
6.6
33
39
Typ.
Max.
25
7
6
30
8
7
56
19
16
53
21
18
48
17
14
60
21
18
39
13
11
51
17
14
28
14
12
13
52
61
36
9
8
32
8
7
44
11
9
76
19
16
60
12
10
75
15
13
165
33
28
175
35
30
145
29
25
185
37
31
105
21
18
135
27
23
105
21
18
-40 to 85°C
-55 to 125°C
Min.
Min.
Max.
75
15
13
95
19
16
205
41
35
220
44
37
180
36
31
230
46
39
130
26
22
170
34
29
130
26
22
5.2
26
31
100
20
17
75
15
13
100
20
17
175
35
30
0
0
0
Max.
90
18
15
115
23
20
250
50
43
265
53
45
220
44
37
280
56
48
160
32
27
205
41
35
160
32
27
4.4
22
26
125
25
21
95
19
16
125
25
21
220
44
37
0
0
0
Unit
ns
ns
ns
ns
ns
ns
ns
ns
ns
MHz
145
29
25
110
22
19
150
30
26
255
51
43
0
0
0
ns
ns
ns
ns
ns
7/15
M74HC590
Test Condition
Symbol
tREM
Parameter
Minimum Removal
Time (CCLR)
VCC
(V)
CL
(pF)
2.0
4.5
6.0
50
Value
TA = 25°C
Min.
Typ.
Max.
28
7
6
75
15
13
-40 to 85°C
-55 to 125°C
Min.
Min.
Max.
Unit
Max.
95
19
16
110
22
19
ns
CAPACITIVE CHARACTERISTICS
Test Condition
Symbol
Parameter
Value
TA = 25°C
VCC
(V)
Min.
Typ.
Max.
10
CIN
Input Capacitance
5
CPD
Power Dissipation
Capacitance (note
1)
40
-40 to 85°C
-55 to 125°C
Min.
Min.
Max.
Unit
Max.
10
10
pF
pF
1) CPD is defined as the value of the IC’s internal equivalent capacitance which is calculated from the operating current consumption without
load. (Refer to Test Circuit). Average operating current can be obtained by the following equation. ICC(opr) = CPD x VCC x fIN + ICC
TEST CIRCUIT
TEST
tPLH, tPHL
SWITCH
Open
tPZL, tPLZ
VCC
tPZH, tPHZ
GND
CL = 50pF/150pF or equivalent (includes jig and probe capacitance)
R1 = 1KΩ or equivalent
RT = ZOUT of pulse generator (typically 50Ω)
8/15
M74HC590
WAVEFORM 1 : PROPAGATION DELAY, MINIMUM PULSE WIDTH (f=1MHz; 50% duty cycle)
WAVEFORM 2 : MINIMUM SETUP AND HOLD TIME (f=1MHz; 50% duty cycle)
9/15
M74HC590
WAVEFORM 3 : PROPAGATION DELAY TIME (f=1MHz; 50% duty cycle)
WAVEFORM 4 : MINIMUM SETUP AND HOLD TIME (f=1MHz; 50% duty cycle)
10/15
M74HC590
WAVEFORM 5 : MINIMUM PULSE WIDTH, REMOVAL TIME (f=1MHz; 50% duty cycle)
WAVEFORM 6 : OUTPUT ENABLE AND DISABLE TIME (f=1MHz; 50% duty cycle)
11/15
M74HC590
Plastic DIP-16 (0.25) MECHANICAL DATA
mm.
inch
DIM.
MIN.
a1
0.51
B
0.77
TYP
MAX.
MIN.
TYP.
MAX.
0.020
1.65
0.030
0.065
b
0.5
0.020
b1
0.25
0.010
D
20
0.787
E
8.5
0.335
e
2.54
0.100
e3
17.78
0.700
F
7.1
0.280
I
5.1
0.201
L
Z
3.3
0.130
1.27
0.050
P001C
12/15
M74HC590
SO-16 MECHANICAL DATA
DIM.
mm.
MIN.
TYP
A
a1
inch
MAX.
MIN.
TYP.
1.75
0.1
0.068
0.2
a2
MAX.
0.003
0.007
1.65
0.064
b
0.35
0.46
0.013
0.018
b1
0.19
0.25
0.007
0.010
C
0.5
0.019
c1
45° (typ.)
D
9.8
10
0.385
0.393
E
5.8
6.2
0.228
0.244
e
1.27
0.050
e3
8.89
0.350
F
3.8
4.0
0.149
0.157
G
4.6
5.3
0.181
0.208
L
0.5
1.27
0.019
0.050
M
S
0.62
0.024
8° (max.)
PO13H
13/15
M74HC590
TSSOP16 MECHANICAL DATA
mm.
inch
DIM.
MIN.
TYP
A
MAX.
MIN.
TYP.
MAX.
1.2
A1
0.05
A2
0.8
b
0.047
0.15
0.002
0.004
0.006
1.05
0.031
0.039
0.041
0.19
0.30
0.007
0.012
c
0.09
0.20
0.004
0.0089
D
4.9
5
5.1
0.193
0.197
0.201
E
6.2
6.4
6.6
0.244
0.252
0.260
E1
4.3
4.4
4.48
0.169
0.173
0.176
1
e
0.65 BSC
K
0°
L
0.45
A
0.60
0.0256 BSC
8°
0°
0.75
0.018
8°
0.024
0.030
A2
A1
b
e
K
c
L
E
D
E1
PIN 1 IDENTIFICATION
1
0080338D
14/15
M74HC590
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the
consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from
its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications
mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information
previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or
systems without express written approval of STMicroelectronics.
© The ST logo is a registered trademark of STMicroelectronics
© 2000 STMicroelectronics - Printed in Italy - All Rights Reserved
STMicroelectronics GROUP OF COMPANIES
Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco
Singapore - Spain - Sweden - Switzerland - United Kingdom
© http://www.st.com
15/15