19-2525; Rev 1; 4/10 KIT ATION EVALU E L B AVAILA 16-Bit, +5V, 200ksps ADC with 10µA Shutdown Features The MAX1162 low-power, 16-bit analog-to-digital converter (ADC) features a successive-approximation ADC, automatic power-down, fast 1.1µs wakeup, and a highspeed SPI™/QSPI™/MICROWIRE™-compatible interface. The MAX1162 operates with a single +5V analog supply and features a separate digital supply, allowing direct interfacing with +2.7V to +5.25V digital logic. o 16-Bit Resolution, No Missing Codes At the maximum sampling rate of 200ksps, the MAX1162 consumes typically 2.75mA. Power consumption is typically 13.75mA (AVDD = DVDD = +5V) at a 200ksps (max) sampling rate. AutoShutdown™ reduces supply current to 140µA at 10ksps and to less than 10µA at reduced sampling rates. Excellent dynamic performance and low power, combined with ease of use and small package size (10-pin µMAX® and 10-pin DFN) make the MAX1162 ideal for battery-powered and data-acquisition applications or for other circuits with demanding power consumption and space requirements. o SPI/QSPI/MICROWIRE-Compatible Serial Interface o +5V Single-Supply Operation o Adjustable Logic Level (+2.7V to +5.25V) o Input-Voltage Range: 0 to VREF o Internal Track/Hold, 4MHz Input Bandwidth o Small 10-Pin µMAX or 10-Pin DFN Package o Low Power 2.75mA at 200ksps 140µA at 10ksps 0.1µA in Power-Down Mode Ordering Information TEMP RANGE PART Applications PINPACKAGE INL (LSB) MAX1162BCUB+ 0°C to +70°C 10 µMAX ±2 Motor Control MAX1162BC_B* 0°C to +70°C 10 DFN ±2 Industrial Process Control MAX1162CCUB+ 0°C to +70°C 10 µMAX ±4 MAX1162CC_B* 0°C to +70°C 10 DFN MAX1162BEUB+ -40°C to +85°C 10 µMAX ±2.5 MAX1162BE_B* -40°C to +85°C 10 DFN ±2.5 Industrial I/O Modules Data-Acquisition Systems Thermocouple Measurements ±4 MAX1162CEUB+ -40°C to +85°C 10 µMAX ±4 Accelerometer Measurements MAX1162CE_B* -40°C to +85°C 10 DFN ±4 Portable- and Battery-Powered Equipment *Future product—contact factory for DFN package availability. +Denotes a lead(Pb)-free/RoHS-compliant package. Pin Configuration Functional Diagram appears at end of data sheet. TOP VIEW REF 1 AVDD SPI and QSPI are trademarks of Motorola, Inc. MICROWIRE is a trademark of National Semiconductor Corp. AutoShutdown is a trademark of Maxim Integrated Products, Inc. 10 AIN 2 MAX1162 9 AGND 8 DVDD AGND 3 CS 4 7 DGND SCLK 5 6 DOUT µMAX/DFN µMAX is a registered trademark of Maxim Integrated Products, Inc. ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com. 1 MAX1162 General Description MAX1162 16-Bit, +5V, 200ksps ADC with 10µA Shutdown ABSOLUTE MAXIMUM RATINGS AVDD to AGND .........................................................-0.3V to +6V DVDD to DGND.........................................................-0.3V to +6V DGND to AGND.....................................................-0.3V to +0.3V AIN, REF to AGND ...................................-0.3V to (AVDD + 0.3V) SCLK, CS to DGND ..................................................-0.3V to +6V DOUT to DGND .......................................-0.3V to (DVDD + 0.3V) Maximum Current Into Any Pin ...........................................50mA Continuous Power Dissipation (TA = +70°C) 10-Pin µMAX (derate 5.6mW/°C above +70°C) ..........444mW Operating Temperature Ranges MAX1162_CUB .................................................0°C to +70°C MAX1162_EUB ..............................................-40°C to +85°C Maximum Junction Temperature .....................................+150°C Storage Temperature Range .............................-65°C to +150°C Lead Temperature (soldering, 10s) .................................+300°C Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS (AVDD = DVDD = +4.75V to +5.25V, fSCLK = 4.8MHz (50% duty cycle), 24 clocks/conversion (200ksps), VREF = +4.096V, CREF = 4.7µF, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS DC ACCURACY (Note 1) Resolution 16 TA = -40°C MAX1162B Relative Accuracy (Note 2) INL MAX1162C MAX1162B Differential Nonlinearity DNL MAX1162C Transition Noise RMS noise Offset Error Gain Error (Note 3) Offset Drift Gain Drift (Note 3) Bits -2.5 +2.5 TA = 0°C -2 +2 TA = +85°C -2 +2 TA = -40°C -4 +4 TA = 0°C -4 +4 TA = +85°C -4 +4 TA = -40°C NMC* 2 TA = 0°C NMC* 1.75 TA = +85°C NMC* 1.75 TA = -40°C -2 +2 TA = 0°C -2 +2 TA = +85°C -2 +2 ±0.65 LSB LSBRMS 0.1 1 mV ±0.002 ±0.01 %FSR 0.4 ppm/oC 0.2 ppm/oC *NMC = No missing code. 2 LSB _______________________________________________________________________________________ 16-Bit, +5V, 200ksps ADC with 10µA Shutdown (AVDD = DVDD = +4.75V to +5.25V, fSCLK = 4.8MHz (50% duty cycle), 24 clocks/conversion (200ksps), VREF = +4.096V, CREF = 4.7µF, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS SINAD 86 89.5 dB SNR 87 90 dB 92 103 dB DYNAMIC SPECIFICATIONS (1kHz sine wave, 4.096VPSignal-to-Noise Plus Distortion Signal-to-Noise Ratio Total Harmonic Distortion THD Spurious-Free Dynamic Range SFDR -90 dB Full-Power Bandwidth -3dB point 4 MHz Full-Linear Bandwidth SINAD > 86dB 10 kHz CONVERSION RATE Conversion Time tCONV Serial Clock Frequency fSCLK (Note 4) 5 0.1 240 µs 4.8 MHz Aperture Delay tAD 15 ns Aperture Jitter tAJ <50 ps Sample Rate fS Track/Hold Acquisition Time fSCLK / 24 200 tACQ 1.1 Input Range VAIN 0 Input Capacitance CAIN ksps µs ANALOG INPUT (AIN) VREF 40 V pF EXTERNAL REFERENCE Input-Voltage Range Input Current VREF IREF 3.8 AVDD VREF = +4.096V, fSCLK = 4.8MHz 100 VREF = +4.096V, SCLK idle 0.01 CS = DVDD, SCLK idle 0.01 V µA DIGITAL INPUTS (SCLK, CS) Input High Voltage VIH DVDD = +2.7V to +5.25V Input Low Voltage VIL DVDD = +2.7V to +5.25V IIN VIN = 0 to DVDD Input Leakage Current Input Hysteresis Input Capacitance 0.7 x DVDD V ±0.1 0.3 x DVDD V ±1 µA VHYST 0.2 V CIN 15 pF DIGITAL OUTPUT (DOUT) Output High Voltage VOH Output Low Voltage VOL Three-State Output Leakage Current Three-State Output Capacitance ISOURCE = 0.5mA, DVDD = +2.7V to +5.25V DVDD 0.25V V ISINK = 10mA, DVDD = +4.75V to +5.25V 0.7 ISINK = 1.6mA, DVDD = +2.7V to +5.25V 0.4 IL CS = DVDD ±0.1 COUT CS = DVDD 15 ±10 V µA pF _______________________________________________________________________________________ 3 MAX1162 ELECTRICAL CHARACTERISTICS (continued) MAX1162 16-Bit, +5V, 200ksps ADC with 10µA Shutdown ELECTRICAL CHARACTERISTICS (continued) (AVDD = DVDD = +4.75V to +5.25V, fSCLK = 4.8MHz (50% duty cycle), 24 clocks/conversion (200ksps), VREF = +4.096V, CREF = 4.7µF, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS POWER SUPPLIES Analog Supply AVDD 4.75 5.25 V Digital Supply DVDD 2.7 5.25 V Analog Supply Current Digital Supply Current Shutdown Supply Current Power-Supply Rejection Ratio IAVDD IDVDD IAVDD + IDVDD PSRR CS = DGND CS = DGND, DOUT = all zeros 200ksps 2.75 100ksps 1.4 10ksps 0.14 1ksps 0.014 200ksps 0.6 100ksps 0.3 10ksps 0.03 1ksps 0.003 CS = DVDD, SCLK = idle 0.1 AVDD = DVDD = +4.75V to +5.25V, full-scale input (Note 5) 68 3.25 mA 1.0 mA 10 µA dB TIMING CHARACTERISTICS (Figures 1, 2, 3, and 6) (AVDD = DVDD = +4.75V to +5.25V, fSCLK = 4.8MHz (50% duty cycle), 24 clocks/conversion (200ksps), VREF = +4.096V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) PARAMETER SYMBOL CONDITIONS MIN TYP MAX 1.1 UNITS Acquisition Time tACQ µs SCLK to DOUT Valid tDO CDOUT = 50pF 50 ns CS Fall to DOUT Enable tDV CDOUT = 50pF 80 ns CS Rise to DOUT Disable tTR CDOUT = 50pF 80 ns CS Pulse Width tCSW 50 CS Fall to SCLK Rise Setup tCSS 100 CS Rise to SCLK Rise Hold tCSH SCLK High Pulse Width tCH 65 ns SCLK Low Pulse Width tCL 65 ns SCLK Period tCP 208 ns 4 ns ns 0 _______________________________________________________________________________________ ns 16-Bit, +5V, 200ksps ADC with 10µA Shutdown (AVDD = +4.75V to +5.25V, DVDD = +2.7V to +5.25V, fSCLK = 4.8MHz (50% duty cycle), 24 clocks/conversion (200ksps), VREF = +4.096V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) PARAMETER SYMBOL CONDITIONS MIN TYP MAX tACQ SCLK to DOUT Valid tDO CDOUT = 50pF 100 ns CS Fall to DOUT Enable tDV CDOUT = 50pF 100 ns tTR CDOUT = 50pF CS Rise to DOUT Disable 1.1 UNITS Acquisition Time µs 80 ns CS Pulse Width tCSW 50 ns CS Fall to SCLK Rise Setup tCSS 100 ns CS Rise to SCLK Rise Hold tCSH SCLK High Pulse Width tCH 65 ns SCLK Low Pulse Width tCL 65 ns SCLK Period tCP 208 ns 0 ns Note 1: AVDD = DVDD = +5V. Note 2: Relative accuracy is the deviation of the analog value at any code from its theoretical value after the full-scale range has been calibrated. Note 3: Offset and reference errors nulled. Note 4: Conversion time is defined as the number of clock cycles multiplied by the clock period; clock has 50% duty cycle. Note 5: Defined as the change in positive full scale caused by a ±5% variation in the nominal supply voltage. Typical Operating Characteristics (AVDD = DVDD = +5V, fSCLK = 4.8MHz, CLOAD = 50pF, CREF = 4.7µF, VREF = +4.096V, TA = +25°C, unless otherwise noted.) DNL vs. OUTPUT CODE 0.5 0.5 DNL (LSB) 1.0 0 0 -0.5 -0.5 -1.0 -1.0 -1.5 -1.5 0 13107 26214 39322 OUTPUT CODE 52429 65536 -40 -60 -80 -100 -120 -2.0 -2.0 -20 MAGNITUDE (dB) 1.5 1.0 MAX1162 FFT 0 MAX1162 toc02 MAX1162 toc01 1.5 INL (LSB) 2.0 MAX1162 toc03 INL vs. OUTPUT CODE 2.0 -140 0 13107 26214 39322 OUTPUT CODE 52429 65536 0 10 20 30 40 50 60 70 80 90 100 FREQUENCY (kHz) _______________________________________________________________________________________ 5 MAX1162 TIMING CHARACTERISTICS (Figures 1, 2, 3, and 6) Typical Operating Characteristics (continued) (AVDD = DVDD = +5V, fSCLK = 4.8MHz, CLOAD = 50pF, CREF = 4.7µF, VREF = +4.096V, TA = +25°C, unless otherwise noted.) 90 70 50 40 30 THD (dB) SFDR (dB) 80 60 70 60 50 40 20 10 0 10 0 0.1 1 -120 0.1 100 10 1 0.1 100 10 10 100 FREQUENCY (kHz) FREQUENCY (kHz) SUPPLY CURRENT vs. CONVERSION RATE SUPPLY CURRENT vs. SUPPLY VOLTAGE SUPPLY CURRENT vs. TEMPERATURE SUPPLY CURRENT (mA) 0.01 2.5 2.0 1.5 1.0 0.5 0.1 1 10 100 1000 2.5 2.0 1.5 1.0 0.5 0 0.001 MAX1162 toc09 3.0 SUPPLY CURRENT (mA) 3.0 0.1 3.5 MAX1162 toc08 MAX1162 toc07 3.5 1 0 4.75 4.85 4.95 5.05 5.15 5.25 -40 -15 SUPPLY VOLTAGE (V) CONVERSION RATE (kHz) 60 14 12 10 8 6 4 MAX1162 toc11 16 150 SHUTDOWN SUPPLY CURRENT (nA) 18 35 SHUTDOWN SUPPLY CURRENT vs. TEMPERATURE MAX1162 toc10 20 10 TEMPERATURE (°C) SHUTDOWN SUPPLY CURRENT vs. SUPPLY VOLTAGE ISHDN (nA) 1 FREQUENCY (kHz) 10 0.01 -10 -20 -30 -40 -50 -60 -70 -80 -90 -100 -110 30 20 MAX1162 toc06 80 0 MAX1162 toc05 120 110 100 MAX1162 toc04 90 SINAD (dB) THD vs. FREQUENCY SFDR vs. FREQUENCY SINAD vs. FREQUENCY 100 SUPPLY CURRENT (mA) MAX1162 16-Bit, +5V, 200ksps ADC with 10µA Shutdown 125 100 75 50 25 2 0 0 4.75 4.85 4.95 5.05 SUPPLY VOLTAGE (V) 6 5.15 5.25 -40 -15 10 35 TEMPERATURE (°C) _______________________________________________________________________________________ 60 85 85 16-Bit, +5V, 200ksps ADC with 10µA Shutdown OFFSET ERROR vs. ANALOG SUPPLY VOLTAGE 800 600 OFFSET ERROR (µV) 600 400 200 0 -200 400 200 0 -200 -400 -400 -600 -600 -800 -800 -1000 -1000 4.75 4.85 4.95 5.05 5.15 MAX1162 toc13 800 OFFSET ERROR (µV) OFFSET ERROR VS. TEMPERATURE 1000 MAX1162 toc12 1000 -40 5.25 -15 GAIN ERROR vs. ANALOG SUPPLY VOLTAGE 35 60 85 GAIN ERROR vs. TEMPERATURE 0.015 MAX1162 toc15 0.020 MAX1162 toc14 0.020 0.015 0.010 GAIN ERROR (%) 0.010 GAIN ERROR (%) 10 TEMPERATURE (°C) SUPPLY VOLTAGE (V) 0.005 0 -0.005 0.005 0 -0.005 -0.010 -0.010 -0.015 -0.015 -0.020 -0.020 4.75 4.85 4.95 5.05 SUPPLY VOLTAGE (V) 5.15 5.25 -40 -15 10 35 60 85 TEMPERATURE (°C) _______________________________________________________________________________________ 7 MAX1162 Typical Operating Characteristics (continued) (AVDD = DVDD = +5V, fSCLK = 4.8MHz, CLOAD = 50pF, CREF = 4.7µF, VREF = +4.096V, TA = +25°C, unless otherwise noted.) 16-Bit, +5V, 200ksps ADC with 10µA Shutdown MAX1162 Pin Description PIN NAME FUNCTION 1 REF 2 AVDD Analog +5V Supply Voltage. Bypass to AGND (pin 3) with a 0.1µF capacitor. 3, 9 AGND Analog Ground. Connect pins 3 and 9 together. Place star ground at pin 3. 4 CS Active-Low Chip-Select Input. Forcing CS high places the MAX1162 in shutdown with a typical current of 0.1µA. A high-to-low transition on CS activates normal operating mode and initiates a conversion. 5 SCLK Serial Clock Input. SCLK drives the conversion process and clocks out data at data rates up to 4.8MHz. 6 DOUT Serial Data Output. Data changes state on SCLK’s falling edge. DOUT is high impedance when CS is high. 7 DGND Digital Ground 8 DVDD Digital Supply Voltage. Bypass to DGND with a 0.1µF capacitor. 10 AIN External Reference Voltage Input. Sets the analog voltage range. Bypass to AGND with a 4.7µF capacitor. Analog Input Detailed Description The MAX1162 includes an input track-and-hold (T/H) and successive-approximation register (SAR) circuitry to convert an analog input signal to a digital 16-bit output. Figure 4 shows the MAX1162 in its simplest configuration. The serial interface requires only three digital lines (SCLK, CS, and DOUT) and provides an easy interface to microprocessors (µPs). The MAX1162 has two power modes: normal and shutdown. Driving CS high places the MAX1162 in shutdown, reducing the supply current to 0.1µA (typ), while pulling CS low places the MAX1162 in normal operating mode. Falling edges on CS initiate conversions that are driven by SCLK. The conversion result is available at DOUT in unipolar serial format. The serial data stream consists of eight zeros followed by the data bits (MSB first). Figure 3 shows the interface timing diagram. Analog Input Figure 5 illustrates the input sampling architecture of the ADC. The voltage applied at REF sets the full-scale input voltage. Track-and-Hold (T/H) In track mode, the analog signal is acquired on the internal hold capacitor. In hold mode, the T/H switches open and the capacitive DAC samples the analog input. 8 During the acquisition, the analog input (AIN) charges capacitor CDAC. The acquisition interval ends on the falling edge of the sixth clock cycle (Figure 6). At this instant, the T/H switches open. The retained charge on CDAC represents a sample of the input. In hold mode, the capacitive digital-to-analog converter (DAC) adjusts during the remainder of the conversion cycle to restore node ZERO to zero within the limits of 16-bit resolution. At the end of the conversion, force CS high and then low to reset the input side of the CDAC switches back to AIN, and charge CDAC to the input signal again. The time required for the T/H to acquire an input signal is a function of how quickly its input capacitance is charged. If the input signal’s source impedance is high, the acquisition time lengthens and more time must be allowed between conversions. The acquisition time (tACQ) is the maximum time the device takes to acquire the signal. Use the following formula to calculate acquisition time: tACQ = 13(RS + RIN) x 35pF where R IN = 800Ω, R S = the input signal’s source impedance, and t ACQ is never less than 1.1µs. A source impedance less than 1kΩ does not significantly affect the ADC’s performance. To improve the input signal bandwidth under AC conditions, drive AIN with a wideband buffer (>4MHz) that can drive the ADC’s input capacitance and settle quickly. _______________________________________________________________________________________ 16-Bit, +5V, 200ksps ADC with 10µA Shutdown 1mA 1mA DOUT DOUT DOUT 1mA CLOAD = 50pF CLOAD = 50pF CLOAD = 50pF DGND DGND a) VOL TO VOH DOUT 1mA CLOAD = 50pF DGND MAX1162 VDD VDD DGND a) VOH TO HIGH-Z b) HIGH-Z TO VOL AND VOH TO VOL Figure 1. Load Circuits for DOUT Enable Time and SCLK to DOUT Delay Time b) VOL TO HIGH-Z Figure 2. Load Circuits for DOUT Disable Time CS tCSW tCSS tCH tCL tCSH SCLK tCP tDV tDO tTR DOUT TIMING NOT TO SCALE. Figure 3. Detailed Serial Interface Timing Input Bandwidth The ADC’s input tracking circuitry has a 4MHz smallsignal bandwidth, so it is possible to digitize highspeed transient events and measure periodic signals with bandwidths exceeding the ADC’s sampling rate by using undersampling techniques. To avoid aliasing of unwanted high-frequency signals into the frequency band of interest, use anti-alias filtering. AIN VREF AIN CS REF SCLK DOUT CS SCLK DOUT 4.7µF AVDD +5V MAX1162 0.1µF Analog Input Protection Internal protection diodes, which clamp the analog input to AVDD or AGND, allow the input to swing from AGND - 0.3V to AVDD + 0.3V, without damaging the device. If the analog input exceeds 300mV beyond the supplies, limit the input current to 10mA. +5V DVDD 0.1µF AGND DGND GND Figure 4. Typical Operating Circuit _______________________________________________________________________________________ 9 MAX1162 16-Bit, +5V, 200ksps ADC with 10µA Shutdown Digital Interface Initialization after Power-Up and Starting a Conversion REF The digital interface consists of two inputs, SCLK and CS, and one output, DOUT. A logic high on CS places the MAX1162 in shutdown (AutoShutdown) and places DOUT in a high-impedance state. A logic low on CS places the MAX1162 in the fully powered mode. To start a conversion, pull CS low. A falling edge on CS initiates an acquisition. SCLK drives the A/D conversion and shifts out the conversion results (MSB first) at DOUT. TRACK AIN CAPACITIVE DAC ZERO CSWITCH 3pF CDAC 32pF HOLD RIN 800Ω GND TRACK HOLD AUTO-ZERO RAIL Timing and Control Conversion-start and data-read operations are controlled by the CS and SCLK digital inputs (Figures 6 and 7). Ensure that the duty cycle on SCLK is between 40% and 60% at 4.8MHz (the maximum clock frequency). For lower clock frequencies, ensure that the minimum high and low times are at least 65ns. Conversions with SCLK rates less than 100kHz can result in reduced accuracy due to leakage. Figure 5. Equivalent Input Circuit SCLK begins shifting out the data (MSB first) after the falling edge of the 8th SCLK pulse. Twenty-four falling clock edges are needed to shift out the eight leading zeros and 16 data bits. Extra clock pulses occurring after the conversion result has been clocked out, and prior to the rising edge of CS, produce trailing zeros at DOUT and have no effect on the converter operation. Force CS high after reading the conversion’s LSB to reset the internal registers and place the MAX1162 in shutdown. For maximum throughput, force CS low again to initiate the next conversion immediately after the specified minimum time (tCSW). Note: Forcing CS high in the middle of a conversion immediately aborts the conversion and places the MAX1162 in shutdown. Note: Coupling between SCLK and the analog inputs (AIN and REF) may result in an offset. Variations in frequency, duty cycle, or other aspects of the clock signal’s shape result in changing offset. A CS falling edge initiates an acquisition sequence. The analog input is stored in the capacitive DAC, DOUT changes from high impedance to logic low, and the ADC begins to convert after the sixth clock cycle. SCLK drives the conversion process and shifts out the conversion result on DOUT. CS SCLK DOUT tDV 1 4 tCSS tCL 6 8 16 24 20 tCSH tCH tACQ 12 D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 tDO Figure 6. External Timing Diagram 10 D0 ______________________________________________________________________________________ tTR 16-Bit, +5V, 200ksps ADC with 10µA Shutdown MAX1162 COMPLETE CONVERSION SEQUENCE CS DOUT CONVERSION 0 POWERED UP CONVERSION 1 POWERED DOWN POWERED UP TIMING NOT TO SCALE. Figure 7. Shutdown Sequence Output Coding and Transfer Function The data output from the MAX1162 is binary and Figure 8 depicts the nominal transfer function. Code transitions occur halfway between successive-integer LSB values (VREF = 4.096V and 1LSB = 63µV or 4.096V/65536). OUTPUT CODE FULL-SCALE TRANSITION 11 . . . 111 11 . . . 110 11 . . . 101 Applications Information External Reference The MAX1162 requires an external reference with a +3.8V and AVDD voltage range. Connect the external reference directly to REF. Bypass REF to AGND (pin 3) with a 4.7µF capacitor. When not using a low-ESR bypass capacitor, use a 0.1µF ceramic capacitor in parallel with the 4.7µF capacitor. Noise on the reference degrades conversion accuracy. The input impedance at REF is 40kΩ for DC currents. During a conversion the external reference at REF must deliver 100µA of DC load current and have an output impedance of 10Ω or less. For optimal performance, buffer the reference through an op amp and bypass the REF input. Consider the MAX1162’s equivalent input noise (38µV RMS) when choosing a reference. Input Buffer Most applications require an input buffer amplifier to achieve 16-bit accuracy. If the input signal is multiplexed, switch the input channel immediately after acquisition, rather than near the end of or after a conversion (Figure 9). This allows the maximum time for the input buffer amplifier to respond to a large step change in the input signal. The input amplifier must have a slew rate of at least 2V/µs to complete the required output-voltage change before the beginning of the acquisition time. FS = VREF VREF 65536 1LSB = 00 . . . 011 00 . . . 010 00 . . . 001 00 . . . 000 0 1 2 3 INPUT VOLTAGE (LSB) FS FS - 3/2LSB Figure 8. Unipolar Transfer Function, Full Scale (FS) = VREF, Zero Scale (ZS) = GND At the beginning of the acquisition, the internal sampling capacitor array connects to AIN (the amplifier output), causing some output disturbance. Ensure that the sampled voltage has settled before the end of the acquisition time. Digital Noise Digital noise can couple to AIN and REF. The conversion clock (SCLK) and other digital signals active during input acquisition contribute noise to the conversion result. Noise signals synchronous with the sampling interval result in an effective input offset. Asynchronous signals produce random noise on the input, whose high-frequency components can be aliased into the fre- ______________________________________________________________________________________ 11 MAX1162 16-Bit, +5V, 200ksps ADC with 10µA Shutdown IN1 IN2 A0 A1 4-TO-1 MUX MAX1162 IN3 AIN OUT IN4 CS CLK ACQUISITION CONVERSION CS A0 A1 TIMING NOT TO SCALE. CHANGE MUX INPUT HERE Figure 9. Change Multiplexer Input Near Beginning of Conversion to Allow Time for Slewing and Settling quency band of interest. Minimize noise by presenting a low impedance (at the frequencies contained in the noise signal) at the inputs. This requires bypassing AIN to AGND, or buffering the input with an amplifier that has a small-signal bandwidth of several MHz, or preferably both. AIN has 4MHz (typ) of bandwidth. DC Accuracy To improve DC accuracy, choose a buffer with an offset much less than the MAX1162’s offset (1mV (max) for +5V supply), or whose offset can be trimmed while maintaining stability over the required temperature range. Distortion Avoid degrading dynamic performance by choosing an amplifier with distortion much less than the MAX1162’s total harmonic distortion (THD = -102dB at 1kHz) at frequencies of interest. If the chosen amplifier has insufficient common-mode rejection, which results in degraded THD performance, use the inverting configuration (positive input grounded) to eliminate errors from this source. Low temperature-coefficient, gain-setting resistors reduce linearity errors caused by resistance changes due to selfheating. To reduce linearity errors due to finite amplifier gain, use amplifier circuits with sufficient loop gain at the frequencies of interest. The MAX1162’s interface is fully compatible with SPI, QSPI, and MICROWIRE standard serial interfaces. 12 Serial Interfaces If a serial interface is available, establish the CPU’s serial interface as master, so that the CPU generates the serial clock for the MAX1162. Select a clock frequency between 100kHz and 4.8MHz: 1) Use a general-purpose I/O line on the CPU to pull CS low. 2) Activate SCLK for a minimum of 24 clock cycles. The serial data stream of eight leading zeros followed by the MSB of the conversion result begins at the falling edge of CS. DOUT transitions on SCLK’s falling edge and the output is available in MSB-first ______________________________________________________________________________________ 16-Bit, +5V, 200ksps ADC with 10µA Shutdown I/O SCK MISO When using the SPI (Figure 10a) or MICROWIRE (Figure 10b) interfaces, set CPOL = 0 and CPHA = 0. Conversion begins with a falling edge on CS (Figure 10c). Three consecutive 8-bit readings are necessary to obtain the entire 16-bit result from the ADC. DOUT data transitions on the serial clock’s falling edge. The first 8-bit data stream contains all leading zeros. The second 8-bit data stream contains the MSB through D8. The third 8-bit data stream contains D7 through D0. QSPI Interface Using the high-speed QSPI interface with CPOL = 0 and CPHA = 0, the MAX1162 supports a maximum fSCLK of 4.8MHz. Figure 11a shows the MAX1162 connected to a QSPI master and Figure 11b shows the associated interface timing. CS I/O CS SCLK SK SCLK DOUT SI DOUT MICROWIRE VDD SPI MAX1162 MAX1162 SS Figure 10a. SPI Connections Figure 10b. MICROWIRE Connections 1ST BYTE READ 1 SCLK 2ND BYTE READ 4 6 12 8 16 CS 0 DOUT* 0 0 0 0 0 0 0 D15 D14 D13 D12 D11 D10 D9 D8 D7 MSB *WHEN CS IS HIGH, DOUT = HIGH-Z 3RD BYTE READ 20 24 HIGH-Z TIMING NOT TO SCALE. D7 D6 D5 D4 D3 D2 D1 D0 LSB Figure 10c. SPI/MICROWIRE Interface Timing Sequence (CPOL = CPHA = 0) ______________________________________________________________________________________ 13 MAX1162 SPI and MICROWIRE Interfaces format. Observe the SCLK to DOUT valid timing characteristic. Clock data into the µP on SCLK’s rising edge. 3) Pull CS high at or after the 24th falling clock edge. If CS remains low, trailing zeros are clocked out after the least significant bit (D0 = LSB). 4) With CS high, wait at least 50ns (tCSW) before starting a new conversion by pulling CS low. A conversion can be aborted by pulling CS high before the conversion ends. Wait at least 50ns before starting a new conversion. Data can be output in three 8-bit sequences or continuously. The bytes contain the results of the conversion padded with eight leading zeros before the MSB. If the serial clock has not been idled after the LSB (D0) and CS has been kept low, DOUT sends trailing zeros. MAX1162 16-Bit, +5V, 200ksps ADC with 10µA Shutdown CS CS SCK QSPI SCLK MISO DOUT VDD MAX1162 SS Figure 11a. QSPI Connections 1 SCLK CS 4 6 8 END OF ACQUISITION DOUT* 12 D15 D14 D13 D12 16 D11 D10 D9 D8 24 20 D7 D6 D5 D4 D3 D2 D1 MSB *WHEN CS IS HIGH, DOUT = HIGH-Z D0 HIGH-Z LSB Figure 11b. QSPI Interface Timing Sequence (CPOL = CPHA = 0) PIC16 with SSP Module and PIC17 Interface VDD VDD SCLK SCK DOUT SDI CS I/O PIC16/17 MAX1162 GND Figure 12a. SPI Interface Connection for a PIC16/PIC17 The MAX1162 is compatible with a PIC16/PIC17 microcontroller (µC) using the synchronous serial-port (SSP) module. To establish SPI communication, connect the controller as shown in Figure 12a. Configure the PIC16/PIC17 as system master, by initializing its synchronous serial-port control register (SSPCON) and synchronous serial-port status register (SSPSTAT) to the bit patterns shown in Tables 1 and 2. In SPI mode, the PIC16/PIC17 µC allows 8 bits of data to be synchronously transmitted and received simulta- Table 1. Detailed SSPCON Register Contents CONTROL BIT MAX1162 SETTINGS SYNCHRONOUS SERIAL-PORT CONTROL REGISTER (SSPCON) WCOL BIT7 X Write Collision Detection Bit SSPOV BIT6 X Receive Overflow Detect Bit SSPEN BIT5 1 Synchronous Serial-Port Enable Bit: 0: Disables serial port and configures these pins as I/O port pins. 1: Enables serial port and configures SCK, SDO, and SCI pins as serial port pins. Clock Polarity Select Bit. CKP = 0 for SPI master mode selection. CKP BIT4 0 SSPM3 BIT3 0 SSPM2 BIT2 0 SSPM1 BIT1 0 SSPM0 BIT0 1 14 Synchronous Serial-Port Mode Select Bit. Sets SPI master mode and selects fCLK = fOSC / 16. ______________________________________________________________________________________ 16-Bit, +5V, 200ksps ADC with 10µA Shutdown MAX1162 Table 2. Detailed SSPSTAT Register Contents MAX1162 SETTINGS CONTROL BIT SYNCHRONOUS SERIAL-PORT CONTROL REGISTER (SSPSTAT) SMP BIT7 0 SPI Data Input Sample Phase. Input data is sampled at the middle of the data output time. CKE BIT6 1 SPI Clock Edge Select Bit. Data is transmitted on the rising edge of the serial clock. D/A BIT5 X Data Address Bit P BIT4 X Stop Bit S BIT3 X Start Bit R/W BIT2 X Read/Write Bit Information UA BIT1 X Update Address BF BIT0 X Buffer Full Status Bit X = Don’t care. 1ST BYTE READ 2ND BYTE READ 12 SCLK 16 CS 0 DOUT* 0 0 0 0 0 0 0 D15 D14 D13 D12 D11 D10 D9 D8 D7 MSB *WHEN CS IS HIGH, DOUT = HIGH-Z 3RD BYTE READ 20 24 HIGH-Z TIMING NOT TO SCALE. D7 D6 D5 D4 D3 D2 D1 D0 LSB Figure 12b. SPI Interface Timing with PIC16/PIC17 in Master Mode (CKE = 1, CKP = 0, SMP = 0, SSPM3 - SSPM0 = 0001) neously. Three consecutive 8-bit readings (Figure 12b) are necessary to obtain the entire 16-bit result from the ADC. DOUT data transitions on the serial clock’s falling edge and is clocked into the µC on SCLK’s rising edge. The first 8-bit data stream contains all zeros. The second 8-bit data stream contains the MSB through D8. The third 8-bit data stream contains bits D7 through D0. Definitions tion, once offset and gain errors have been nulled. The static linearity parameters for the MAX1162 are measured using the endpoint method. Differential Nonlinearity Differential nonlinearity (DNL) is the difference between an actual step width and the ideal value of 1LSB. A DNL error specification of 1LSB guarantees no missing codes and a monotonic transfer function. Integral Nonlinearity Aperture Definitions Integral nonlinearity (INL) is the deviation of the values on an actual transfer function from a straight line. This straight line can be either a best-fit straight line fit or a line drawn between the endpoints of the transfer func- Aperture jitter (tAJ) is the sample-to-sample variation in the time between samples. Aperture delay (tAD) is the time between the falling edge of the sampling clock and the instant when the actual sample is taken. ______________________________________________________________________________________ 15 MAX1162 16-Bit, +5V, 200ksps ADC with 10µA Shutdown ENOB = (SINAD - 1.76) / 6.02 ENOB vs. INPUT FREQUENCY Figure 13 shows the effective number of bits as a function of the MAX1162’s input frequency. 16 14 Total Harmonic Distortion EFFECTIVE BITS 12 Total harmonic distortion (THD) is the ratio of the RMS sum of the first five harmonics of the input signal to the fundamental itself. This is expressed as: 10 8 6 ⎡ V22 + V32 + V4 2 + V52 THD = 20 × log⎢⎢ V1 ⎢⎣ 4 2 0 0.1 1 10 100 INPUT FREQUENCY (kHz) Figure 13. Effective Number of Bits vs. Input Frequency Signal-to-Noise Ratio For a waveform perfectly reconstructed from digital samples, signal-to-noise ratio (SNR) is the ratio of the full-scale analog input (RMS value) to the RMS quantization error (residual error). The ideal, theoretical minimum analog-to-digital noise is caused by quantization noise error only and results directly from the ADCs resolution (N bits): SNR = (6.02 x N + 1.76)dB In reality, there are other noise sources besides quantization noise: thermal noise, reference noise, clock jitter, etc. SNR is computed by taking the ratio of the RMS signal to the RMS noise, which includes all spectral components minus the fundamental, the first five harmonics, and the DC offset. ⎤ ⎥ ⎥ ⎥⎦ where V1 is the fundamental amplitude and V2 through V5 are the 2nd- through 5th-order harmonics. Spurious-Free Dynamic Range Spurious-free dynamic range (SFDR) is the ratio of the RMS amplitude of the fundamental (maximum signal component) to the RMS value of the next largest frequency component. Supplies, Layout, Grounding, and Bypassing Use PC boards with separate analog and digital ground planes. Do not use wire-wrap boards. Connect the two ground planes together at the MAX1162 (pin 3). Isolate the digital supply from the analog with a lowvalue resistor (10Ω) or ferrite bead when the analog and digital supplies come from the same source (Figure 14). Signal-to-Noise Plus Distortion Signal-to-noise plus distortion (SINAD) is the ratio of the fundamental input frequency’s RMS amplitude to the RMS equivalent of all the other ADC output signals, excluding the DC offset. ⎡ ⎤ SignalRMS ⎥ SINAD(dB) = 20 × log ⎢ ⎢ (Noise + Distortion) ⎥ RMS ⎦ ⎣ Effective Number of Bits Effective number of bits (ENOB) indicate the global accuracy of an ADC at a specific input frequency and sampling rate. An ideal ADC error consists of quantization noise only. With an input range equal to the fullscale range of the ADC, calculate the effective number of bits as follows: 16 AIN VREF AIN CS REF SCLK DOUT CS SCLK DOUT 4.7µF AVDD +5V MAX1162 10Ω 0.1µF DVDD AGND DGND 0.1µF GND Figure 14. Powering AVDD and DVDD from a Single Supply ______________________________________________________________________________________ 16-Bit, +5V, 200ksps ADC with 10µA Shutdown • Apply AGND before DGND. • Apply AIN and REF after AVDD and AGND are present. • DVDD is independent of the supply sequencing. Ensure that digital return currents do not pass through the analog ground and that return-current paths are low impedance. A 5mA current flowing through a PC board ground trace impedance of only 0.05Ω creates an error voltage of about 250µV, 4LSB error with a +4V fullscale system. The board layout should ensure that digital and analog signal lines are kept separate. Do not run analog and digital (especially the SCLK and DOUT) lines parallel to one another. If one must cross another, do so at right angles. The ADCs high-speed comparator is sensitive to highfrequency noise on the AVDD power supply. Bypass an excessively noisy supply to the analog ground plane with a 0.1µF capacitor in parallel with a 1µF to 10µF low-ESR capacitor. Keep capacitor leads short for best supply-noise rejection. AVDD REF AIN AGND TRACK AND HOLD SCLK 16-BIT SAR ADC OUTPUT BUFFER DOUT CONTROL CS MAX1162 DGND Package Information Chip Information PROCESS: BiCMOS DVDD For the latest package outline information and land patterns, go to www.maxim-ic.com/packages. Note that a “+”, “#”, or “-” in the package code indicates RoHS status only. Package drawings may show a different suffix character, but the drawing pertains to the package regardless of RoHS status. PACKAGE TYPE PACKAGE CODE DOCUMENT NO. 10 µMAX U10-2 21-0061 ______________________________________________________________________________________ 17 MAX1162 Functional Diagram Constraints on sequencing the power supplies and inputs are as follows: MAX1162 16-Bit, +5V, 200ksps ADC with 10µA Shutdown Revision History REVISION NUMBER REVISION DATE 0 7/02 Initial release 1 4/10 Changed analog supply current and added lead-free information DESCRIPTION PAGES CHANGED — 1, 3, 5 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 18 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 © 2010 Maxim Integrated Products Maxim is a registered trademark of Maxim Integrated Products, Inc.