MAXIM MAX4503ESA

19-1064; Rev 0; 6/96
Low-Voltage, Dual-Supply, SPST,
CMOS Analog Switches
____________________________Features
♦ Available in SOT23-5 Package
♦ Dual-Supply Operation from ±1V to ±6V
♦ Guaranteed On-Resistance:
250W with ±5V Supplies
♦ Guaranteed Low Off-Leakage Currents:
1nA at +25°C
10nA at +85°C
♦ Guaranteed Low On-Leakage Currents:
2nA at +25°C
20nA at +85°C
♦ Guaranteed Low Charge Injection: 10pC Max
♦ Fast Switching Speed: tON = 150ns, tOFF = 100ns
♦ CMOS-Logic Compatible Input
________________________Applications
______________Ordering Information
Battery-Operated Equipment
PART
TEMP. RANGE
Audio and Video Signal Routing
MAX4503CPA
0°C to +70°C
8 Plastic DIP
Low-Voltage Data-Acquisition Systems
MAX4503CSA
MAX4503CUK
MAX4503C/D
MAX4503EPA
MAX4503ESA
MAX4503EUK
MAX4503MJA
0°C to +70°C
0°C to +70°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-55°C to +125°C
8 SO
5 SOT23-5
Dice*
8 Plastic DIP
8 SO
5 SOT23-5
8 CERDIP**
Communications Circuits
Cellular Phones
PCMCIA Cards
Modems
PIN-PACKAGE
Ordering Information continued at end of data sheet.
* Contact factory for dice specifications.
** Contact factory for availability.
___________________________________________________________Pin Configurations
TOP VIEW
COM 1
8
NO
COM 1
8
NC
N.C. 2
7
V-
N.C. 2
7
V-
N.C. 3
6
IN
N.C. 3
6
IN
5
N.C.
5
N.C.
V+ 4
MAX4503
DIP/SO
INPUT
LOW
HIGH
V+ 4
MAX4504
DIP/SO
SWITCH STATE
MAX4504
MAX4503
ON
OFF
OFF
ON
COM 1
5
V+
NO 2
V- 3
COM 1
5
V+
4
IN
NC 2
MAX4503
SOT23-5
4
IN
V- 3
MAX4504
SOT23-5
MARKING INFORMATION (SOTs ONLY)
LOT SPECIFIC CODE
XX XX
AC = MAX4503
AD = MAX4504
N.C. = NOT INTERNALLY CONNECTED
________________________________________________________________ Maxim Integrated Products
1
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800
MAX4503/MAX4504
_______________General Description
The MAX4503/MAX4504 are low-voltage, dual-supply,
single-pole/single-throw (SPST), CMOS analog switches. The MAX4503 is normally open (NO). The MAX4504
is normally closed (NC).
These CMOS switches can operate continuously with
dual supplies between ±1.V and ±6V. Each switch can
handle rail-to-rail analog signals. The off-leakage current is only 1nA at +25°C or 10nA at +85°C.
The digital input is CMOS-logic compatible when using
±5V supplies. A unique logic input architecture allows
this even though the parts have no ground pin.
For single-supply operation, use the MAX4501/
MAX4502, which are pin-for-pin equivalents.
MAX4503/MAX4504
Low-Voltage, Dual-Supply, SPST,
CMOS Analog Switches
ABSOLUTE MAXIMUM RATINGS
(Voltages Referenced to V-)
V+ ..............................................................................-0.3V, +13V
Voltage into Any Terminal (Note 1) ..........-0.3V to (V+ + 0.3V) or
±10mA (whichever occurs first)
Continuous Current into Any Terminal..............................±10mA
Peak Current, NO_ or COM_
(pulsed at 1ms,10% duty cycle)...................................±20mA
Continuous Power Dissipation (TA = +70°C)
8-Pin Plastic DIP (derate 9.09mW/°C above +70°C) ...727mW
8-Pin SO (derate 5.88mW/°C above +70°C)................471mW
5-Pin SOT23-5 (derate 7.1mW/°C above +70°C) ........571mW
8-Pin CERDIP (derate 8.00mW/°C above +70°C)........640mW
Operating Temperature Ranges
MAX4503C_ _/MAX4504C_ _ .............................0°C to +70°C
MAX4503E_ _/MAX4504E_ _ ...........................-40°C to +85°C
MAX4503MJA/MAX4504MJA ........................-55°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10sec) .............................+300°C
Note 1: Voltages on any signal terminal exceeding V+ or V- are clamped by internal diodes. Limit forward-diode current to maximum
current rating.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—±5V Supply
(V+ = +4.5V to +5.5V, V- = -4.5V to -5.5V, VINH =3.5V, VINL = 1.5V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at
TA = +25°C.)
PARAMETER
SYMBOL
MIN
CONDITIONS
TYP
MAX
(Note 2)
UNITS
ANALOG SWITCH
Analog Signal Range
COM to NO or NC
On-Resistance
NO or NC Off Leakage
Current (Note 3)
COM Off Leakage Current
(Note 3)
COM On Leakage Current
(Note 3)
VCOM, VNO,
VNC
RON
VVCOM_ = 3.5V, ICOM = 1mA
TA = +25°C
60
TA = TMIN to TMAX
INO(OFF),
INC(OFF)
V+ = 5.5V, V- = -5.5V,
VCOM_ = ±4.5V,
_
VNO or VNC = +4.5V
TA = +25°C
V+ = 5.5V, V- = -5.5V,
VCOM_ = ±4.5V,
_
VNO or VNC = +4.5V
TA = +25°C
ICOM(OFF)
V+ = 5.5V, V- = -5.5V,
VCOM = ±4.5V,
VNO or VNC = ±4.5V
TA = +25°C
ICOM(ON)
V+
TA = TMIN
to TMAX
TA = TMIN
to TMAX
TA = TMIN
to TMAX
250
350
-1
0.01
-10
10
M
-100
100
C, E
-10
10
M
-100
100
C, E
-20
20
M
-200
200
-2
0.01
0.01
Ω
1
C, E
-1
V
nA
1
nA
2
nA
DIGITAL I/O
IN Input Logic High
VIH
(V+) - 1.5
V+
V
IN Input Logic Low
VIL
V-
(V+) - 3.5
V
1
µA
IN Input Current Logic
High or Low
2
IIH, IIL
VIN = V+, 0V
-1
0.03
_______________________________________________________________________________________
Low-Voltage, Dual-Supply, SPST,
CMOS Analog Switches
(V+ = +4.5V to +5.5V, V- = -4.5V to -5.5V, VINH = 3.5V, VINL = 1.5V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at
TA = +25°C.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
(Note 2)
MAX
UNITS
SWITCH DYNAMIC CHARACTERISTICS
Turn-On Time
tON
VIN = 3V, RL = 1kΩ
VNO or VNC = 3V, Figure 1
TA = +25°C
Turn-Off Time
tOFF
VIN = 3V, RL = 1kΩ
VNO or VNC = 3V, Figure 1
TA = +25°C
Charge Injection
(Note 4)
Q
Off Isolation
VISO
NO or NC Off Capacitance
30
TA = TMIN to TMAX
150
240
20
TA = TMIN to TMAX
100
150
CL = 1nF, VNO_ = 0V, RS = 0Ω,
TA = +25°C, Figure 2
1
RL = 50Ω, CL = 15pF, VNO = 1VRMS,
f = 100kHz, TA = +25°C, Figure 3
10
ns
ns
pC
<-90
dB
CNO(OFF)
f = 1MHz, TA = +25°C, Figure 4
3
pF
COM Off Capacitance
COFF(COM)
f = 1MHz, TA = +25°C, Figure 4
3
pF
COM On Capacitance
CON(COM)
f = 1MHz, TA = +25°C, Figure 4
9
pF
POWER SUPPLY
V+, V- Supply Current
I+, I-
VIN = 0V or V+
TA = +25°C
-125
TA = TMIN to TMAX
-200
40
125
200
µA
_______________________________________________________________________________________
3
MAX4503/MAX4504
ELECTRICAL CHARACTERISTICS—±5V Supply (continued)
MAX4503/MAX4504
Low-Voltage, Dual-Supply, SPST,
CMOS Analog Switches
ELECTRICAL CHARACTERISTICS—±3V Supply
(V+ = +2.7V to +3.3V, V- = -2.7V to -3.3V, VINH = 2.4V, VINL = 0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at
TA = +25°C.)
PARAMETER
SYMBOL
MIN
CONDITIONS
TYP
MAX
(Note 2)
UNITS
ANALOG SWITCH
Analog Signal Range
COM to NO or NC
On-Resistance
NO or NC Off Leakage
Current (Notes 3, 4)
COM Off Leakage Current
(Notes 3, 4)
COM On Leakage Current
(Notes 3, 4)
VCOM, VNO,
VNC
RON
0
VCOM_ = 1.5V, ICOM = 0.1mA
TA = +25°C
100
TA = TMIN to TMAX
INO(OFF),
INC(OFF)
VCOM_ = ±1.5V,
_
VNO or VNC = +1.5V,
V+ = 3.3V, V- = -3.3V
TA = +25°C
VCOM_ = ±1.5V,
_
VNO or VNC = +1.5V,
V+ = 3.3V, V- = -3.3V
TA = +25°C
ICOM(OFF)
VNO or VNC = ±1.5V,
VCOM_ = ±1.5V,
V+ = 3.3V, V- = -3.3V
TA = +25°C
ICOM(ON)
V+
TA = TMIN
to TMAX
TA = TMIN
to TMAX
TA = TMIN
to TMAX
400
500
-1
1
C, E
-10
10
M
-100
100
-1
1
C, E
-10
10
M
-100
100
-2
2
C, E
-20
20
M
-200
200
V
Ω
nA
nA
nA
DIGITAL I/O
IN Input Logic High
VINH
2.4
V+
V
IN Input Logic Low
VINL
V-
(V+) - 2.3
V
IIH, IIL
-1
0.03
1
µA
TA = +25°C
-100
25
100
TA = TMIN to TMAX
-175
IN Input Current Logic High
or Low
POWER SUPPLY
V+, V- Supply Current
Note 2:
Note 4:
Note 3:
Note 5:
4
I+, I-
IN = 0V or V+
175
µA
The algebraic convention is used in this data sheet; the most negative value is shown in the minimum column.
Guaranteed, not production tested.
Leakage parameters are 100% tested at maximum rated hot operating temperature, and guaranteed by correlation at +25°C.
SOT packaged parts are 100% tested at +25°C. Limits at maximum and minimum rated temperature are guaranteed by
design and correlation limits at +25°C.
_______________________________________________________________________________________
Low-Voltage, Dual-Supply, SPST,
CMOS Analog Switches
V+ = +1V
V- = -1V
160
5
MAX4503-02
1000
MAX4503-01
180
V+ = +5V
V- = -5V
4
3
140
TA = +125°C
80
100
V+ = +4V
V- = -4V
40
-2
V+ = +5V
V- = -5V
TA = +25°C
-3
20
-4
TA = -55°C
0
-5
10
0
1
2
3
4
5
-5 -4 -3 -2 -1
VCOM (V)
0
1
2
ICOM ON
MAX4503-05
ON LOSS
-20
-30
-40
1
0.01
0.001
-50
-60
-70
ICOM/NO/NC OFF
10
0
-10
-110
-120
0.0001 0.001 0.01 0.1
20 40 60 80 100 120 140
-20
-30
-40
OFF ISOLATION
1
10
TEMPERATURE (°C)
FREQUENCY (MHz)
TOTAL HARMONIC DISTORTION
vs. FREQUENCY
LOGIC THRESHOLD
vs. V+ AND V-
2
3
4
5
2.5
LOGIC THRESHOLD (V)
1
0.1
-50
-60
100 1000
3.0
MAX4503-06
600Ω IN/OUT
V+ = 5V
V- = -5V
1
60
50
40
30
20
ON PHASE
-80
-90
-100
0.0001
0.00001
-60 -40 -20 0
0
FREQUENCY RESPONSE (50Ω IN AND OUT)
0
-10
LOSS (dB)
LEAKAGE CURRENT (nA)
-5 -4 -3 -2 -1
5
VCOM (V)
MAX4503-04
10
10
4
VCOM (V)
LEAKAGE CURRENT
vs. TEMPERATURE
100
3
MAX4503-07
-5 -4 -3 -2 -1
0
-1
TA = +85°C
60
1
PHASE (DEGREES)
100
2
V+ = +3V
V- = -3V
V+ = +2V
V- = -2V
Q (pC)
RON (Ω)
120
TOTAL HARMONIC DISTORTION (%)
RON (Ω)
CHARGE INJECTION vs. VCOM
ON-RESISTANCE vs. VCOM
200
MAX4503-03
ON-RESISTANCE
vs. VCOM AND TEMPERATURE
2.0
1.5
1.0
0.5
0
-0.5
-1.0
0.01
10
100
1000
10,000 100,000
FREQUENCY (Hz)
0
1
2
3
4
5
V+, V- VOLTAGE (V)
_______________________________________________________________________________________
5
MAX4503/MAX4504
__________________________________________Typical Operating Characteristics
(V+ = +5V, V- = -5V, TA = +25°C, unless otherwise noted.)
MAX4503/MAX4504
Low-Voltage, Dual-Supply, SPST,
CMOS Analog Switches
______________________________________________________________Pin Description
PIN
NAME
FUNCTION
1
COM
Analog Switch Common Terminal
2, 3, 5
–
N.C.
No Connect (not internally connected)
4
5
V+
Positive (analog and digital) Supply Voltage Input
4
6
4
IN
Digital Control Input
7
3
7
3
V-
Negative (analog) Supply Voltage Input
8
2
–
–
NO
Analog Switch Normally Open Terminal
–
–
8
2
NC
Analog Switch Normally Closed Terminal
MAX4503
MAX4504
DIP/SO
SOT23-5
DIP/SO
SOT23-5
1
1
1
2, 3, 5
–
4
5
6
Note: NO, NC, and COM pins are identical and interchangeable. Either may be considered as an input or output; signals pass
equally well in both directions.
__________Applications Information
Power-Supply Considerations
The MAX4503/MAX4504’s construction is typical of
most CMOS analog switches, except they have only
two supply pins: V+ and V-. These voltages set the
analog voltage limits of the switch. Reverse ESD-protection diodes are internally connected between IN and
each analog signal pin and both V+ and V-. If any analog signal exceeds V+ or V-, one of these diodes will
conduct. During normal operation, these (and other)
reverse-biased ESD diodes leak, forming the only current drawn from V-. Additional current flows through V+
from the logic-level translator.
Virtually all the analog leakage current is provided
through the ESD diodes. Although the ESD diodes on a
given signal pin are identical and therefore fairly well
balanced, they are reverse biased differently. Each is
biased by either V+ or V- and the analog signal. This
means their leakages will vary as the signal varies. The
difference in the two diode leakages to the V+ and Vpins constitutes the analog-signal-path leakage current.
All analog leakage current flows between each pin and
one of the supply terminals, not to the other switch terminal. This is why both sides of a given switch can
show leakage currents of either the same or opposite
polarity.
There is no connection between the analog signal
paths and V+ or V-.
V+ and V- also power the internal logic and logic-level
translators. Since there is no ground pin, the logic input
6
has a low-current pull-up to V+ and the logic limit is set
by an internal comparator referenced to V+. The logiclevel translators convert the logic levels to switched V+
and V- signals, to drive the gates of the analog signals.
This drive signal is the only connection between the
logic supplies (and signals) and the analog supplies.
COM, NO, and NC pins have ESD-protection diodes to
V+ and V-.
The logic is CMOS compatible when V+ is +5V. CMOS
compatibility is maintained with all V+ values, assuming
that the CMOS logic is operated from the same V+ supply. Since the MAX4503/MAX4504 have no ground
pins, the logic levels are internally referenced to V+.
Do not connect the MAX4503/MAX4504 V+ to +3V
and connect the logic-level pins to TTL-logic-level
signals. TTL levels can exceed +3V and violate the
absolute maximum ratings, damaging the part
and/or external circuits.
High-Frequency Performance
In 50Ω systems, signal response is reasonably flat up
to 50MHz. (see Typical Operating Characteristics).
Above 20MHz the on-response has several minor
peaks which are highly layout dependent. The problem
is not in turning the switch on, but in turning it off. The
off-state switch acts like a capacitor, and passes higher
frequencies with less attenuation. At 10MHz, off isolation is about -65dB in 50Ω systems, becoming worse
(approximately 20dB per decade) as frequency
increases. Higher circuit impedances also make off isolation worse.
_______________________________________________________________________________________
Low-Voltage, Dual-Supply, SPST,
CMOS Analog Switches
V+
VIN
NO
0V
VNO
MAX4503
VIN
VOUT
COM
IN
50%
VIN
V+
90%
90%
VOUT
VOUT
V50Ω
35pF
1k
0V
V-
tON
tOFF
V+
VIN
NC
0V
VNC
MAX4504
VIN
VOUT
COM
IN
90%
VOUT
V50Ω
50%
VIN
V+
1k
90%
VOUT
35pF
0V
V-
tOFF
tON
Figure 1. Switching Times
V+
V+
VIN
IN
NO
or
NC
MAX4503
MAX4504 COM
V-
50Ω
V-
V+
VNO or VNC = 0V
VIN
0V
MAX4504
MAX4503
VOUT
CL
1000pF
∆VOUT
VOUT
∆VOUT IS THE MEASURED VOLTAGE DUE TO CHARGE TRANSFER
ERROR Q WHEN THE CHANNEL TURNS OFF.
Q = ∆VOUT x CL
Figure 2. Charge Injection
_______________________________________________________________________________________
7
MAX4503/MAX4504
______________________________________________Test Circuits/Timing Diagrams
MAX4503/MAX4504
Low-Voltage, Dual-Supply, SPST,
CMOS Analog Switches
_________________________________Test Circuits/Timing Diagrams (continued)
V+ 10nF
V
OFF ISOLATION = 20log OUT
VIN
NETWORK
ANALYZER
V+
V+
IN
NO
or
NC
MAX4503
MAX4504 COM
50Ω
VIN
VOUT
50Ω
MEAS.
V-
V
ON LOSS = 20log OUT
VIN
REF
50Ω
50Ω
V-
MEASUREMENTS ARE STANDARDIZED AGAINST SHORT
AT SOCKET TERMINALS. OFF ISOLATION IS MEASURED
BETWEEN COM AND “OFF” TERMINAL ON EACH SWITCH.
ON LOSS IS MEASURED BETWEEN COM AND “ON”
TERMINAL ON EACH SWITCH. SIGNAL DIRECTION
THROUGH SWITCH IS REVERSED; WORST-VALUES
ARE RECORDED.
Figure 3. Off Isolation and On Loss
___________________Chip Topography
V+
V+
NO
or
NC
V+
IN
AS
REQUIRED
IN
MAX4503
MAX4504 COM
V-
1MHz
CAPACITANCE
ANALYZER
0.035"
(0.889mm)
V-
Figure 4. NO, NC, and COM Capacitance
COM
_Ordering Information (continued)
PART
TEMP. RANGE
MAX4504CPA
0°C to +70°C
8 Plastic DIP
MAX4504CSA
MAX4504CUK
MAX4504C/D
MAX4504EPA
MAX4504ESA
MAX4504EUK
MAX4504MJA
0°C to +70°C
0°C to +70°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-55°C to +125°C
8 SO
5 SOT23-5
Dice*
8 Plastic DIP
8 SO
5 SOT23-5
8 CERDIP**
* Contact factory for dice specifications.
** Contact factory for availability.
8
PIN-PACKAGE
NO/NC
V–
0.030"
(0.762mm)
TRANSISTOR COUNT: 36
SUBSTRATE IS INTERNALLY CONNECTED TO V+
_______________________________________________________________________________________
Low-Voltage, Dual-Supply, SPST,
CMOS Analog Switches
D
P0
W
P2
B0
t
D1
F
P
NOTE: DIMENSIONS ARE IN MM.
AND FOLLOW EIA481-1 STANDARD.
A0
B0
3.200±0.102
3.099±0.102
+0.102
+0.000
D 1.499
D1
0.991
+0.254
+0.000
K0
A0
E 1.753±0.102
P0
3.988
F3.505±0.051
P010
40.005±0.203
P2
2.007 ±0.051
K0
P
1.397±0.102
3.988
±0.102
t
±0.102
0.254 ±0.127
W8.001
+0.305
-0.102
_______________________________________________________________________________________
5 SOT23-5
E
9
MAX4503/MAX4504
__________________________________________________Tape-and-Reel Information
MAX4503/MAX4504
Low-Voltage, Dual-Supply, SPST,
CMOS Analog Switches
________________________________________________________Package Information
b
DIM
e
A
A1
A2
b
C
D
E
E1
L
e
e1
α
E
e1
D
α
MILLIMETERS
MIN
MAX
0.90
1.45
0.00
0.15
0.90
1.30
0.35
0.50
0.08
0.20
2.80
3.00
2.60
3.00
1.50
1.75
0.35
0.55
0.95ref
1.90ref
0°
10°
21-0057B
E1
A A2
C
5-PIN SOT23-5
SMALL-OUTLINE
TRANSISTOR PACKAGE
L
A1
DIM
D
0°-8°
A
0.101mm
0.004in.
e
B
A1
E
10
C
H
L
Narrow SO
SMALL-OUTLINE
PACKAGE
(0.150 in.)
A
A1
B
C
E
e
H
L
INCHES
MAX
MIN
0.069
0.053
0.010
0.004
0.019
0.014
0.010
0.007
0.157
0.150
0.050
0.244
0.228
0.050
0.016
DIM PINS
D
D
D
8
14
16
MILLIMETERS
MIN
MAX
1.35
1.75
0.10
0.25
0.35
0.49
0.19
0.25
3.80
4.00
1.27
5.80
6.20
0.40
1.27
INCHES
MILLIMETERS
MIN MAX
MIN
MAX
0.189 0.197 4.80
5.00
0.337 0.344 8.55
8.75
0.386 0.394 9.80 10.00
______________________________________________________________________________________
21-0041A
Low Voltage, Dual-Supply, SPST,
CMOS Analog Switches
___________________________________________Package Information (continued)
D
E
DIM
E1
A
A1
A2
A3
B
B1
C
D1
E
E1
e
eA
eB
L
A3
A A2
L A1
0° - 15°
C
e
B1
B
eA
eB
D1
Plastic DIP
PLASTIC
DUAL-IN-LINE
PACKAGE
(0.300 in.)
INCHES
MAX
MIN
0.200
–
–
0.015
0.175
0.125
0.080
0.055
0.022
0.016
0.065
0.045
0.012
0.008
0.080
0.005
0.325
0.300
0.310
0.240
–
0.100
–
0.300
0.400
–
0.150
0.115
PKG. DIM PINS
P
P
P
P
P
N
D
D
D
D
D
D
8
14
16
18
20
24
INCHES
MIN
MAX
0.348 0.390
0.735 0.765
0.745 0.765
0.885 0.915
1.015 1.045
1.14 1.265
MILLIMETERS
MIN
MAX
–
5.08
0.38
–
3.18
4.45
1.40
2.03
0.41
0.56
1.14
1.65
0.20
0.30
0.13
2.03
7.62
8.26
6.10
7.87
2.54
–
7.62
–
–
10.16
2.92
3.81
MILLIMETERS
MIN
MAX
8.84
9.91
18.67 19.43
18.92 19.43
22.48 23.24
25.78 26.54
28.96 32.13
21-0043A
______________________________________________________________________________________
11
MAX4503/MAX4504
Low-Voltage, Dual-Supply, SPST,
CMOS Analog Switches
___________________________________________Package Information (continued)
DIM
E1
E
D
A
0°-15°
Q
L
L1
e
C
B1
B
S1
S
CERDIP
CERAMIC DUAL-IN-LINE
PACKAGE
(0.300 in.)
A
B
B1
C
E
E1
e
L
L1
Q
S
S1
INCHES
MIN
MAX
–
0.200
0.014
0.023
0.038
0.065
0.008
0.015
0.220
0.310
0.290
0.320
0.100
0.125
0.200
0.150
–
0.015
0.070
–
0.098
0.005
–
DIM PINS
D
D
D
D
D
D
8
14
16
18
20
24
MILLIMETERS
MIN
MAX
–
5.08
0.36
0.58
0.97
1.65
0.20
0.38
5.59
7.87
7.37
8.13
2.54
3.18
5.08
3.81
–
0.38
1.78
–
2.49
0.13
–
INCHES
MILLIMETERS
MIN
MAX MIN MAX
–
0.405
–
10.29
–
0.785
–
19.94
–
0.840
–
21.34
–
0.960
–
24.38
–
1.060
–
26.92
–
1.280
–
32.51
21-0045A
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
12 __________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 (408) 737-7600
© 1996 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.