MAXIM MAX5722

19-2124; Rev 2; 7/03
12-Bit, Low-Power, Dual, Voltage-Output
DAC with Serial Interface
Features
♦ Ultra-Low Power Consumption
112µA at VDD = +3.6V
135µA at VDD = +5.5V
The 20MHz, 3-wire SPI™, QSPI™, MICROWIRE™, and
DSP-compatible serial interface save board space and
reduce the complexity of opto- and transformer-isolated
applications. The MAX5722 on-chip power-on reset
(POR) circuit resets the DAC outputs to zero and loads
the output with a 100kΩ resistor to ground. This provides additional safety for applications that drive valves
or other transducers that need to be off on power-up.
The MAX5722’s software-controlled power-down
reduces supply current to less than 0.3µA and provides
software-selectable output loads (1kΩ, 100kΩ, or high
impedance) while in power-down. The MAX5722 is
specified over the -40°C to +125°C automotive temperature range.
♦ Three Software-Selectable Power-Down
Impedances (100kΩ, 1kΩ, Hi-Z)
♦ Wide +2.7V to +5.5V Single-Supply Range
♦ 8-Pin µMAX Package
♦ 0.3µA Power-Down Current
♦ Guaranteed 12-Bit Monotonicity (±1LSB DNL)
♦ Safe Power-Up Reset to Zero Volts at DAC Output
♦ Fast 20MHz, 3-Wire SPI, QSPI, and MICROWIRECompatible Serial Interface
♦ Rail-to-Rail Output Buffer Amplifiers
♦ Schmitt-Triggered Logic Inputs for Direct
Interfacing to Optocouplers
♦ Wide -40°C to +125°C Operating Temperature
Range
Applications
Automatic Tuning
Ordering Information
PART
TEMP RANGE
PIN-PACKAGE
Gain and Offset Adjustment
MAX5722EUA
-40°C to +85°C
8 µMAX
Power Amplifier Control
MAX5722AUA
-40°C to +125°C
8 µMAX
Process Control I/O Boards
Battery-Powered Instruments
VCO Control
Pin Configuration
TOP VIEW
Functional Diagram appears at end of data sheet.
VDD
1
8
OUTB
GND
2
7
OUTA
3
6
REF
SCLK 4
5
DIN
Rail-to-Rail is a registered trademark of Nippon Motorola, Inc.
SPI and QSPI are trademarks of Motorola, Inc.
MICROWIRE is a trademark of National Semiconductor, Corp.
MAX5722
CS
µMAX
________________________________________________________________ Maxim Integrated Products
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
1
MAX5722
General Description
The MAX5722 dual,12-bit, low-power, buffered voltageoutput, digital-to-analog converter (DAC) is packaged
in a space-saving 8-pin µMAX package (5mm ✕ 3mm).
The wide supply voltage range of +2.7V to +5.5V and
112µA supply current accommodates low-power and
low-voltage applications. DAC outputs employ on-chip
precision output amplifiers that swing Rail-to-Rail®. The
MAX5722’s reference input accepts a voltage range
from 0 to VDD. In power-down, the reference input is
high impedance, further reducing the system’s total
power consumption.
MAX5722
12-Bit, Low-Power, Dual, Voltage-Output
DAC with Serial Interface
ABSOLUTE MAXIMUM RATINGS
VDD to GND ..............................................................-0.3V to +6V
OUT_, SCLK, DIN, CS, REF to GND .............-0.3 to (VDD + 0.3V)
Maximum Continuous Current Into Any Pin......................±50mA
Continuous Power Dissipation (TA = +70°C)
8-Pin µMAX (derate 4.6 mW/°C above +70°C) ............362mW
Operating Temperature Range .........................-40°C to +125°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VDD = +2.7V to +5.5V, GND = 0, VREF = VDD, RL = 5kΩ, CL = 200pF, TA = TMIN to TMAX, unless otherwise noted. Typical values are
VDD = +5V, TA = +25°C.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
±2
±16
LSB
±1
LSB
STATIC ACCURACY (Note 1)
Resolution
N
12
Integral Nonlinearity Error
INL
(Note 2)
Differential Nonlinearity Error
DNL
Guaranteed monotonic (Note 2)
Zero-Code Error
OE
Code = 000
0.4
Zero-Code Tempco
Gain Error
1.5
2.3
GE
PSRR
Code = FFF hex, ∆VDD = ±10%
% of FS
ppm/°C
±3
Code = FFF hex
Gain-Error Tempco
Power-Supply Rejection Ratio
Bits
% of FS
0.26
ppm/°C
58.8
dB
REFERENCE INPUT
Reference Input Voltage Range
Reference Input Impedance
Power-Down Reference Current
VREF
RREF
0
In operation
64
90
In power-down mode
2
In power-down mode (Note 3)
1
VDD
V
126
kΩ
MΩ
10
µA
DAC OUTPUT
Output Voltage Range
No load (Note 4)
DC Output Impedance
Code = 800 hex
0.8
Short-Circuit Current
Wake-Up Time
Output Leakage Current
2
0
VDD
VDD = +3V
15
VDD = +5V
48
VDD = +3V
8
VDD = +5V
8
Power-down mode = output high
impedance
±18
_______________________________________________________________________________________
V
Ω
mA
µs
nA
12-Bit, Low-Power, Dual, Voltage-Output
DAC with Serial Interface
(VDD = +2.7V to +5.5V, GND = 0, VREF = VDD, RL = 5kΩ, CL = 200pF, TA = TMIN to TMAX, unless otherwise noted. Typical values are
VDD = +5V, TA = +25°C.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
DIGITAL INPUTS (SCLK, DIN, CS)
0.7 x
VDD
Input High Voltage
VIH
VDD = +3V, +5V
V
Input Low Voltage
VIL
VDD = +3V, +5V
Input Leakage Current
IIN
Digital inputs = 0 or VDD
Input Capacitance
CIN
5
pF
SR
0.5
V/µs
±0.1
0.3 x
VDD
V
±1
µA
DYNAMIC PERFORMANCE
Voltage-Output Slew Rate
Voltage-Output Settling Time
400 hex to C00 hex (Note 5)
Digital Feedthrough
Any digital inputs from 0 to VDD
Digital Analog Glitch Impulse
Major carry transition (code 7FF hex to code
800 hex)
4
DAC-to-DAC Crosstalk
10
µs
0.15
nV-s
12
nV-s
2.4
nV-s
POWER REQUIREMENTS
Supply Voltage Range
VDD
Supply Current with No Load
IDD
Power-Down Supply Current
IDDPD
2.7
5.5
V
All digital inputs at 0 or VDD = 3.6V
112
205
All digital inputs at 0 or VDD = 5.5V
135
215
All digital inputs at 0 or VDD = 5.5V
0.29
1
µA
TYP
MAX
UNITS
20
MHz
µA
TIMING CHARACTERISTICS
(VDD = 2.7V to 5.5V, GND = 0, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
SCLK Clock Frequency
f SCLK
0
SCLK Pulse Width High
tCH
25
ns
SCLK Pulse Width Low
tCL
25
ns
CS Fall to SCLK Rise Setup Time
tCSS
10
ns
SCLK Fall to CS Rise Setup Time
ns
tCSH
10
DIN to SCLK Fall Setup Time
tDS
15
ns
DIN to SCLK Fall Hold Time
tDH
0
ns
tCSW
80
ns
CS Pulse Width High
Note 1:
Note 2:
Note 3:
Note 4:
Note 5:
DC specifications are tested without output loads.
Linearity is guaranteed from code 115 to code 3981.
Limited with test conditions.
Offset and gain error limit the FSR.
Guaranteed by design.
_______________________________________________________________________________________
3
MAX5722
ELECTRICAL CHARACTERISTICS (continued)
Typical Operating Characteristics
(VREF = VDD, TA = +25°C, unless otherwise noted.)
DIFFERENTIAL NONLINEARITY vs.
CODE, TA = +25°C
0.6
0.4
VDD = +5V
0
-4
0.2
0
-0.2
-0.4
-8
-0.6
VDD = +3V
-12
-1.0
INTEGRAL NONLINEARITY vs.
CODE, TA = -40°C
0.8
0.6
DNL (LSB)
INL (LSB)
0
-4
0.2
0
-0.2
-0.4
VDD = +3V
-0.6
-12
-16
0
512 1024 1536 2048 2560 3072 3584 4096
CODE
0
-4
VDD = +3V
-12
-0.2
VDD = +5V
0
MAX5722 toc08
0.6
0.4
0.2
0
-0.2
-0.6
1.0
0.8
0.6
0.4
VDD = +3V
0.2
0
-0.2
VDD = +5V
-0.4
-0.6
-1.0
512 1024 1536 2048 2560 3072 3584 4096
CODE
512 1024 1536 2048 2560 3072 3584 4096
CODE
TOTAL UNADJUSTED ERROR vs.
CODE, TA = +125°C
-0.8
-16
4
0
512 1024 1536 2048 2560 3072 3584 4096
CODE
-0.4
0
VDD = +3V
0.2
-0.6
0.8
DNL (LSB)
VDD = +5V
-8
0.4
-0.4
1.0
8
4
0.6
DIFFERENTIAL NONLINEARITY vs.
CODE, TA = +125°C
MAX5722 toc07
12
0.8
-1.0
0
512 1024 1536 2048 2560 3072 3584 4096
CODE
1.0
-0.8
INTEGRAL NONLINEARITY vs.
CODE, TA = +125°C
16
VDD = +5V
TOTAL UNADJUSTED ERROR vs.
CODE, TA = -40°C
0.4
VDD = +5V
-8
-0.2
0
TOTAL UNADJUSTED ERROR (%)
1.0
8
4
0
512 1024 1536 2048 2560 3072 3584 4096
CODE
MAX5722 toc05
12
VDD = +3V
0.2
DIFFERENTIAL NONLINEARITY vs.
CODE, TA = -40°C
MAX5722 toc04
16
0.4
-0.6
0
512 1024 1536 2048 2560 3072 3584 4096
CODE
TOTAL UNADJUSTED ERROR (%)
0
0.6
-0.4
-0.8
-16
0.8
MAX5722 toc06
4
DNL (LSB)
INL (LSB)
8
1.0
MAX5722 toc03
0.8
MAX5722 toc09
12
MAX5722 toc02
1.0
MAX5722 toc01
16
TOTAL UNADJUSTED ERROR vs.
CODE, TA = +25°C
TOTAL UNADJUSTED ERROR (%)
INTEGRAL NONLINEARITY vs.
CODE, TA = +25°C
INL (LSB)
MAX5722
12-Bit, Low-Power, Dual, Voltage-Output
DAC with Serial Interface
0
512 1024 1536 2048 2560 3072 3584 4096
CODE
0
512 1024 1536 2048 2560 3072 3584 4096
CODE
_______________________________________________________________________________________
12-Bit, Low-Power, Dual, Voltage-Output
DAC with Serial Interface
SOURCE-AND-SINK CURRENT CAPABILITY
(VDD = +3V)
12
CODE = FFF
HEX, SOURCING
CURRENT
FROM OUT_
2.5
0
MINIMUM DNL
-8
MINIMUM INL
-16
CODE = 000 HEX,
SINKING CURRENT INTO OUT_
-20
0
20 40 60 80
TEMPERATURE (°C)
100 120
0
4
6
8
10
12
14
16
0
CODE = 3FF HEX
80
60
40
20
4.7
MAX5722 toc14
250
200
150
100
35
40
800
700
600
VDD = +5V
500
400
300
VDD = +3V
100
0
3.2
3.7
4.2
4.7
5.2
SUPPLY VOLTAGE (V)
SUPPLY CURRENT
vs. TEMPERATURE
FULL-SCALE SETTLING TIME
(VDD = +5V)
0
1
2
3
4
5
CS INPUT VOLTAGE (V)
FULL-SCALE SETTLING TIME
(VDD = +5V)
MAX5722 toc17
MAX5722 toc16
140
30
200
SUPPLY VOLTAGE (V)
160
25
50
2.7
5.2
20
900
0
0
15
SUPPLY CURRENT vs.
CS INPUT VOLTAGE
SUPPLY CURRENT (µA)
100
4.2
10
ISOURCE/SINK (mA)
300
POWER-DOWN SUPPLY CURRENT (nA)
MAX5722 toc13
120
3.7
5
POWER-DOWN SUPPLY CURRENT
vs. SUPPLY VOLTAGE
140
SUPPLY CURRENT (µA)
2
ISOURCE/SINK (mA)
160
3.2
CODE = 000 HEX,
SINKING CURRENT INTO OUT_
0
SUPPLY CURRENT
vs. SUPPLY VOLTAGE
2.7
CODE = 400 HEX,
SINKING CURRENT
INTO OUT_
0.5
0
-40
SUPPLY CURRENT (µA)
1.5
1.0
0.5
-12
CODE = C00 HEX,
SOURCING CURRENT
FROM OUT_
2.5
2.0
CODE = 400 HEX,
SINKING CURRENT
INTO OUT_
1.0
3.0
MAX5722 toc15
-4
1.5
4.0
3.5
CODE = C00
HEX, SOURCING
CURRENT
FROM OUT_
2.0
CODE = FFF HEX, SOURCING
CURRENT FROM OUT_
4.5
VOUT (V)
MAXIMUM INL
MAXIMUM DNL
4
VOUT (V)
INL AND DNL (LSB)
8
5.0
MAX5722 toc11
3.0
MAX5722 toc10
16
SOURCE-AND-SINK CURRENT CAPABILITY
(VDD = +5V)
MAX5722 toc12
WORST CASE INL AND DNL
vs. TEMPERATURE
MAX5722
Typical Operating Characteristics (continued)
(VREF = VDD, TA = +25°C, unless otherwise noted.)
MAX5722 toc18
VSCLK
5V/div
VSCLK
5V/div
VDD = +3V
120
100
VDD = +5V
80
60
40
CODE 000 TO FFF HEX
RL = 5kΩ
CL = 200pF
20
VOUT_
1V/div
CODE FFF HEX TO 000
RL = 5kΩ
CL = 200pF
VOUT_
1V/div
0
-40 -20
0
20
40
60
80
100 120
1µs/div
1µs/div
TEMPERATURE (°C)
_______________________________________________________________________________________
5
MAX5722
12-Bit, Low-Power, Dual, Voltage-Output
DAC with Serial Interface
Typical Operating Characteristics (continued)
(VREF = VDD, TA = +25°C, unless otherwise noted.)
HALF-SCALE SETTLING TIME
(VDD = +3V)
HALF-SCALE SETTLING TIME
(VDD = +3V)
MAX5722 toc20
MAX5722 toc19
VSCLK
5V/div
CODE 400 HEX to
C00 HEX
RL = 5kΩ
CL = 200pF
VSCLK
5V/div
VOUT_
1V/div
CODE C00 HEX TO
400 HEX
RL = 5kΩ
CL = 200pF
1µs/div
1µs/div
EXITING POWER-DOWN
(VDD = +5V)
DIGITAL-TO-ANALOG GLITCH IMPULSE
(VDD = +5V)
MAX5722 toc22
MAX5722 toc21
CODE 800 HEX
VSCLK
5V/div
SCLK,
fSCLK = 500kHz
2V/div
VOUT_
1V/div
VOUT_
AC-COUPLED,
CODE 7FF HEX
TO 800 HEX
5µs/div
1µs/div
DIGITAL-TO-ANALOG GLITCH IMPULSE
(VDD = +3V)
DIGITAL-TO-ANALOG GLITCH IMPULSE
(VDD = +5V)
MAX5722 toc23
SCLK,
fSCLK = 500kHz,
2V/div
VOUT_
VOUT_
AC-COUPLED,
1µs/div
6
20mV/div
MAX5722 toc24
SCLK,
fSCLK = 500kHz,
2V/div
CODE 7FF HEX
TO 800 HEX
VOUT_
1V/div
AC-COUPLED,
50mV/div
CODE 800 HEX
TO 7FF HEX
50mV/div
1µs/div
_______________________________________________________________________________________
12-Bit, Low-Power, Dual, Voltage-Output
DAC with Serial Interface
POWER-ON RESET, FAST RISE TIME
(VDD = +5V)
DIGITAL-TO-ANALOG GLITCH IMPULSE
(VDD = +3V)
MAX5722 toc26
MAX5722 toc25
SCLK,
fSCLK = 500kHz
1V/div
VDD
2V/div
VOUT_
VOUT_
AC-COUPLED,
CODE 800 HEX
TO 7FF HEX
VDD RISE
TIME = 20µs
20mV/div
AC-COUPLED,
10mV/div
20µs/div
1µs/div
POWER-ON RESET, FAST RISE TIME
(VDD = +3V)
POWER-ON RESET, SLOW RISE TIME
(VDD = +5V)
MAX5722 toc28
MAX5722 toc27
VDD RISE
TIME = 76µs
VDD
2V/div
VDD
2V/div
VDD RISE
TIME = 20µs
VOUT_
VOUT_
AC-COUPLED,
AC-COUPLED,
2mV/div
10mV/div
20µs/div
40µs/div
POWER-ON RESET, SLOW RISE TIME
(VDD = +3V)
CLOCK FEEDTHROUGH
(VDD = +5V)
MAX5722 toc29
MAX5722 toc30
fSCLK = 1MHz
VDD
2V/div
SCLK
2V/div
VOUT_
VOUT_
VDD RISE
TIME = 72µs
AC-COUPLED,
AC-COUPLED,
2mV/div
40µs/div
1mV/div
100ns/div
_______________________________________________________________________________________
7
MAX5722
Typical Operating Characteristics (continued)
(VREF = VDD, TA = +25°C, unless otherwise noted.)
MAX5722
12-Bit, Low-Power, Dual, Voltage-Output
DAC with Serial Interface
Typical Operating Characteristics (continued)
(VREF = VDD, TA = +25°C, unless otherwise noted.)
CLOCK FEEDTHROUGH
(VDD = +3V)
LINE TRANSIENT RESPONSE
(VDD = +5V)
MAX5722 toc31
MAX5722 toc32
fSCLK = 1MHz
SCLK
2V/div
VDD,
VOUT_
VOUT_
AC-COUPLED,
100mV/div
AC-COUPLED,
AC-COUPLED,
1mV/div
10mV/div
100ns/div
20µs/div
CROSSTALK
(VDD = +5V)
LINE TRANSIENT RESPONSE
(VDD = +3V)
MAX5722 toc33
MAX5722 toc34
VOUTA
2V/div
VDD,
AC-COUPLED,
100mV/div
VOUTB
VOUT_
AC-COUPLED,
AC-COUPLED,
10mV/div
1mV/div
CODE FFF HEX TO 00B HEX
20µs/div
8
4µs/div
_______________________________________________________________________________________
12-Bit, Low-Power, Dual, Voltage-Output
DAC with Serial Interface
PIN
NAME
FUNCTION
1
VDD
Power-Supply Input
2
GND
Ground
3
CS
Chip-Select Input
4
SCLK
Serial-Clock Input
5
DIN
Serial Data Input
6
REF
External Reference Voltage Input
7, 8
OUTA, OUTB
DAC Voltage Outputs. Power-on reset sets DAC register to zero, and internally connects
OUT to GND with 100kΩ resistor.
Detailed Description
The MAX5722 contains two 12-bit, voltage-output, lowpower, digital-to-analog converters (DACs). Each DAC
employs a resistor string architecture that converts a
12-bit digital input word to an equivalent analog output
voltage proportional to the applied reference voltage.
The MAX5722 shares one reference input (REF)
between both DACs. The MAX5722 includes rail-to-rail
output buffer amplifiers for each DAC, and input logic
for simple microprocessor (µP), and CMOS interfaces.
The power-supply range is from +2.7V to +5.5V
(Functional Diagram). The MAX5722’s reference input
accepts a voltage range from 0 to VDD. In power-down
mode the reference input is high impedance. The
MAX5722 is compatible with the 3-wire SPI, QSPI,
MICROWIRE, and DSP serial interface with Schmitt-triggered logic inputs.
Reference Input and DAC Output Range
The reference input accepts positive DC and AC signals. The voltage at REF sets the full-scale output voltage of both DACs. The reference input voltage range is
0 to VDD. The impedance at REF is 90kΩ. The voltage
at REF can vary from GND to VDD. The output voltages
(VOUT_) are represented by a digitally programmable
voltage source as:
VOUT_ = (VREF ✕ D) / 212
where D is the decimal equivalent of binary DAC input
code ranging from 0 to 4095. VREF is the voltage at
REF.
Output Buffer Amplifiers
All DACs are internally buffered at the output. The
buffer amplifiers have both rail-to-rail common mode
and (GND to VREF) output voltage range. The buffers
are unity-gain stable with CL = 200pF and RL = 5kΩ.
Buffer amplifiers are disabled during power-up and
individual DAC outputs are shorted to GND through a
100kΩ resistor. Buffer amplifiers can individually or altogether be powered-down by programming the input
register control bits. During power-down, contents of
the input and DAC registers remain the same. On
wake-up, all DAC outputs are restored to their prepower-down voltage values.
Power-Down Mode
In power-down mode, the DAC outputs are programmed to one of three output states, 1kΩ, 100kΩ, or
floating (Table 1). The REF input is high impedance
(2MΩ typ), to conserve current drain from the system
reference; therefore, the system reference does not
have to be powered-down. The DAC outputs return to
the values contained in the registers when brought out
of power-down. The recovery time, from total powerdown to power-up, is 8µs. This extra time is needed to
allow the internal bias to wake-up. Power-down mode
reduces current consumption to 0.3µA.
3-Wire Serial Interface
The MAX5722 digital interface is a standard 3-wire connection compatible with SPI/QSPI/MICROWIRE/DSP
interfaces. The chip-select input (CS) frames the serial
data loading at DIN. Immediately following CS high-tolow transition, the data is shifted synchronously and
latched into the input register on the falling edge of the
serial clock input (SCLK). After 16 bits have been
loaded into the serial input register, it transfers its contents to the DAC latch. CS may then either be held low
or brought high. CS must be brought high for a minimum of 80ns before the next write sequence, since a
write sequence is initiated on a falling edge of CS. Not
_______________________________________________________________________________________
9
MAX5722
Pin Description
MAX5722
12-Bit, Low-Power, Dual, Voltage-Output
DAC with Serial Interface
Table 1. Power-Down Mode Control
EXTENDED
CONTROL
DATA BITS
DESCRIPTION
FUNCTION
C3
C2
C1
C0
D11–D5
D4
D3
D2
D1
D0
1
1
1
1
X
0
X
0
0
0
DAC A
DAC O/P, wake-up
1
1
1
1
X
0
X
0
0
1
DAC A
Floating output
1
1
1
1
X
0
X
0
1
0
DAC A
Output is terminated with 1kΩ
1
1
1
1
X
0
X
0
1
1
DAC A
Output is terminated with 100kΩ
1
1
1
1
X
0
X
1
0
0
DAC B
DAC O/P, wake-up
1
1
1
1
X
0
X
1
0
1
DAC B
Floating output
1
1
1
1
X
0
X
1
1
0
DAC B
Output is terminated with 1kΩ
1
1
1
1
X
0
X
1
1
1
DAC B
Output is terminated with 100kΩ
1
1
1
1
X
1
X
0
0
0
DAC A-B
DAC O/P, wake-up
1
1
1
1
X
1
X
0
0
1
DAC A-B
Floating output
1
1
1
1
X
1
X
0
1
0
DAC A-B
Output is terminated with 1kΩ
1
1
1
1
X
1
X
0
1
1
DAC A-B
Output is terminated with 100kΩ
X = Don’t Care
keeping CS low during the first 15 SCLK cycles discards input data. The serial clock (SCLK) can idle
either high or low between transitions.
The MAX5722 has two internal registers per DAC, the
input register and the DAC register. The input register
holds the data that is waiting to be shifted to the DAC
register. Both input registers can be loaded without
updating the output. This function is useful when both
outputs need to be updated at the same time. The input
register can be made transparent. When the input register is transparent, the data written into DIN loads
directly to the DAC register and the output is updated.
The DAC output is not updated until data is written to
the DAC register. See Table 2 for a list of serial-interface programming commands.
Power-On Reset (POR)
The MAX5722 has an internal POR circuit. At power-up,
all DACs are powered-down and OUT_ is terminated to
GND through 100kΩ resistors. Contents of input and
DAC registers are cleared to all zero. An 8µs recovery
time after issuing a wake-up command is needed
before writing to the DAC registers. Power-down mode
control commands can be applied immediately with no
recovery time.
C3-C0 are control bits. The data bits D11 to D0 are in
straight binary format. All zeros correspond to zero
scale and all ones correspond to full scale.
10
Digital Inputs
The digital inputs are compatible with CMOS logic. In
order to save power and reduce input to output coupling, SCLK and DIN input buffers are powered down
immediately after completion of shifting 16 bits into the
input shift register. A high to low transition at CS powers up SCLK and DIN input buffers.
Applications Information
Unipolar Output
The typical application circuit (Figure 3) shows the
MAX5722 configured for a unipolar output, where the
output voltages and the reference inputs have the
same polarity. Table 3 lists the unipolar output codes.
Bipolar Output
The MAX5722 can be configured for bipolar operation
using a dual supply op amp (Figure 4). The transfer
function for bipolar operation is:
 2D 

VOUT = VREF 
 − 1


 4096

where D is the decimal value of the DACs binary input
code. Table 4 shows digital codes (offset binary) and
corresponding output voltages for the circuit in Figure 4.
______________________________________________________________________________________
12-Bit, Low-Power, Dual, Voltage-Output
DAC with Serial Interface
C3
C2
B0 (LSB)
C1
C0
D11
D10
D9
D8
D7
D6
D5
D4
D3
D2
D1
D0
Figure 1. 16-Bit Input Word
tCL
SCLK
X
1
2
tOS
DIN
X
3
4
5
6
16
X
tOH
C3
tCSW
tCH
C2
C1
C0
D11
D10
D1
D0
X
tCSH
tCSS
CS
Figure 2. Timing Diagram
+2.7V TO +5.5V
R1
R2
V+
+2.7V TO +5.5V
REF
VDD
REF
OUT
IN
VDD
VOUT
OUT_
DAC_
OUT_
DAC_
MAX6050
GND
-V
GND
MAX5722
Figure 3. Typical Operating Circuit, Unipolar Output
MAX5722
R1 = R2
Figure 4. Bipolar Output Circuit
______________________________________________________________________________________
11
MAX5722
CONTENTS OF SHIFT REGISTER
B15 (MSB)
MAX5722
12-Bit, Low-Power, Dual, Voltage-Output
DAC with Serial Interface
Table 2. Serial-Interface Programming Commands
CONTROL
DATA BITS
DAC
FUNCTION
C3
C2
C1
C0
D11–D0
0
0
0
0
X
A
Input register transparent, data shifted directly to DAC register, OUTA
updated
0
0
0
1
X
B
Input register transparent, data shifted directly to DAC register, OUTB
updated
0
1
0
0
X
A
Data shifted to input register, OUTA unchanged
0
1
0
1
X
B
Data shifted to input register, OUTB unchanged
1
0
0
0
X
A
Shift data from input register to DAC register, OUTA updated
1
0
0
1
X
B
Shift data from input register to DAC register, OUTB updated
1
1
0
0
X
A-B
Input registers transparent, data shifted directly to DAC registers, OUTA
and OUTB updated
1
1
0
1
X
A-B
Data shifted to input registers, OUTA and OUTB unchanged
1
1
1
0
X
A-B
Shift data from input registers to DAC registers, OUTA and OUTB updated
X = Don’t Care
Table 3. Unipolar Code Table
Table 4. Bipolar Code Table
DAC CONTENTS
ANALOG OUTPUT
DAC CONTENTS
ANALOG OUTPUT
1111 1111 1111
 4095 
+ VREF 

 4096 
1111 1111 1111
 2047 
+ VREF 

 2048 
1000 0000 0001
 2049 
+ VREF 

 4096 
1000 0000 0001
 1 
+ VREF 

 2048 
1000 0000 0000
1000 0000 0000
0111 1111 1111
12
V
+ REF
2
 2047 
+ VREF 

 4096 
0000 0000 0001
 1 
+ VREF 

 4096 
0000 0000 0000
0
0
 1 

 2048 
0111 1111 1111
− VREF 
0000 0000 0001
− VREF 
0000 0000 0000
______________________________________________________________________________________
 2047 

 2048 
− VREF
12-Bit, Low-Power, Dual, Voltage-Output
DAC with Serial Interface
VDD
REF
INPUT
REGISTER A
DAC
REGISTER B
12-BIT DAC A
OUTPUT
BUFFER
OUTA
RESISTOR
NETWORK
INPUT
REGISTER B
DAC
REGISTER B
12-BIT DAC B
OUTPUT
BUFFER
OUTB
RESISTOR
NETWORK
INPUT CONTROL
LOGIC AND SHIFT
REGISTER
POWER-DOWN
CONTROL LOGIC
MAX5722
CS
SCLK
DIN
GND
Power Supply and Layout Considerations
Careful PC board layout is important for optimal system
performance. To reduce noise injection and digital feedthrough and keep analog and digital signals separate.
Ensure that that the return path from GND to the supply
ground is short and low impedance. Use a ground
plane. Bypass VDD to GND with a 0.1µF capacitor as
close as possible to VDD.
Chip Information
TRANSISTOR COUNT: 7737
PROCESS: BiCMOS
______________________________________________________________________________________
13
MAX5722
Functional Diagram
Package Information
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information,
go to www.maxim-ic.com/packages.)
4X S
8
8
INCHES
DIM
A
A1
A2
b
E
ÿ 0.50±0.1
H
c
D
e
E
H
0.6±0.1
L
1
1
α
0.6±0.1
S
BOTTOM VIEW
D
MIN
0.002
0.030
MAX
0.043
0.006
0.037
0.010
0.014
0.005
0.007
0.116
0.120
0.0256 BSC
0.116
0.120
0.188
0.198
0.016
0.026
0∞
6∞
0.0207 BSC
8LUMAXD.EPS
MAX5722
12-Bit, Low-Power, Dual, Voltage-Output
DAC with Serial Interface
MILLIMETERS
MAX
MIN
0.05
0.75
1.10
0.15
0.95
0.25
0.36
0.13
0.18
2.95
3.05
0.65 BSC
2.95
3.05
4.78
5.03
0.41
0.66
0∞
6∞
0.5250 BSC
TOP VIEW
A1
A2
A
α
c
e
b
L
SIDE VIEW
FRONT VIEW
PROPRIETARY INFORMATION
TITLE:
PACKAGE OUTLINE, 8L uMAX/uSOP
APPROVAL
DOCUMENT CONTROL NO.
21-0036
REV.
J
1
1
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
14 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2003 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.