MBRB2060CT, MBR2060CT SWITCHMODEt Power Rectifiers TO−220/D2PAK Surface Mount Power Package These state−of−the−art devices employ the use of the Schottky Barrier principle with a platinum barrier metal. http://onsemi.com Features • • • • • • • • • Package Designed for Power Surface Mount Applications (D2PAK) Center−Tap Configuration (D2PAK) Guardring for Stress Protection Low Forward Voltage 175°C Operating Junction Temperature Epoxy Meets UL 94 V−0 @ 0.125 in Short Heat Sink Tab Manufactured − Not Sheared (D2PAK) Similar in Size to Industry Standard TO−220 Package Pb−Free Packages are Available SCHOTTKY BARRIER RECTIFIERS 20 AMPERES, 60 VOLTS 1 4 3 4 Mechanical Characteristics: • Case: Epoxy, Molded, Epoxy Meets UL 94 V−0 • Weight: 1.7 Grams (Approximately) − D2PAK, • • • • 1.9 Grams (Approximately) − TO−220 Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Max. for 10 Seconds (D2PAK) Device Meets MSL1 Requirements (D2PAK) ESD Ratings: Machine Model, C (>400 V) Human Body Model, 3B (>8000 V) 4 1 3 1 D2PAK CASE 418B STYLE 3 2 3 TO−220AB CASE 221A STYLE 6 MAXIMUM RATINGS (Per Leg) Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 60 V Average Rectified Forward Current (Rated VR, TC = 110°C) Total Device IF(AV) 10 20 A Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz, TC = 100°C) IFRM 20 A Non−Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) IFSM 150 A Peak Repetitive Reverse Surge Current (2.0 ms, 1.0 kHz) IRRM 0.5 A Storage Temperature Range Tstg −65 to +175 °C TJ −65 to +175 °C dv/dt 10,000 V/ms Rating Operating Junction Temperature (Note 1) Voltage Rate of Change (Rated VR) Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. The heat generated must be less than the thermal conductivity from Junction−to−Ambient: dPD/dTJ < 1/RqJA. © Semiconductor Components Industries, LLC, 2009 September, 2009 − Rev. 8 1 MARKING DIAGRAMS AY WW B2060G AKA A Y WW B2060 G AKA AY WW B2060G AKA = Assembly Location = Year = Work Week = Device Code = Pb−Free Package = Diode Polarity ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. Publication Order Number: MBRB2060CT/D MBRB2060CT, MBR2060CT THERMAL CHARACTERISTICS (Per Leg) Characteristic Thermal Resistance, − Junction−to−Case − Junction−to−Ambient (Note 2) − Junction−to−Ambient (Note 2) MBRB2060CT MBR2060CT Symbol Value Unit RqJC RqJA RqJA 2.0 50 60 °C/W Symbol Value Unit 2. When mounted using minimum recommended pad size on FR−4 board. ELECTRICAL CHARACTERISTICS (Per Leg) Characteristic Maximum Instantaneous Forward Voltage (Note 3) (iF = 20 Amps, TJ = 125°C) (iF = 20 Amps, TJ = 25°C) vF Maximum Instantaneous Reverse Current (Note 3) (Rated dc Voltage, TJ = 125°C) (Rated dc Voltage, TJ = 25°C) iR 0.85 0.95 35 0.15 V mA 3. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%. ORDERING INFORMATION Package Shipping† MBRB2060CT D2PAK 50 Units / Rail MBRB2060CTG D2PAK 50 Units / Rail MBRB2060CTT4 D2PAK 800 Units / Tape & Reel MBRB2060CTT4G D2PAK 800 Units / Tape & Reel TO−220 50 Units / Rail TO−220 (Pb−Free) 50 Units / Rail Device MBR2060CT MBR2060CTG (Pb−Free) (Pb−Free) †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 2 50 TJ = 150°C 125°C 20 I R, REVERSE CURRENT (mA) i F, INSTANTANEOUS FORWARD CURRENT (AMPS MBRB2060CT, MBR2060CT 150°C 10 100°C 5 TJ = 25°C 3 1 10 TJ = 125°C TJ = 100°C 1 0.1 0.01 0.5 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 vF, INSTANTANEOUS VOLTAGE (VOLTS) 0.9 1 TJ = 25°C 0 20 dc 40 60 80 100 VR, REVERSE VOLTAGE (VOLTS) 120 140 Figure 2. Typical Reverse Current Per Diode 20 18 RATED VOLTAGE APPLIED RqJC = 2°C/W AVERAGE POWER (WATTS) IF(AV) , AVERAGE FORWARD CURRENT (AMPS) Figure 1. Typical Forward Voltage Per Diode 20 15 SQUARE WAVE 10 5.0 IPK/IAV = 5 TJ = 125°C PI 16 IPK/IAV = 10 14 12 IPK/IAV = 20 10 SQUARE WAVE 8 6 DC 4 2 0 0 80 100 120 140 TC, CASE TEMPERATURE (°C) 160 180 0 Figure 3. Typical Current Derating, Case, Per Leg 2 4 6 8 10 12 14 AVERAGE CURRENT (AMPS) 16 18 Figure 4. Average Power Dissipation and Average Current http://onsemi.com 3 20 MBRB2060CT, MBR2060CT PACKAGE DIMENSIONS D2PAK 3 CASE 418B−04 ISSUE J NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 418B−01 THRU 418B−03 OBSOLETE, NEW STANDARD 418B−04. C E V W −B− 4 1 2 A S 3 −T− SEATING PLANE K J G D 0.13 (0.005) M T B M N R P L L M M F F F VIEW W−W 1 VIEW W−W 2 VIEW W−W 3 SOLDERING FOOTPRINT* 8.38 0.33 1.016 0.04 10.66 0.42 17.02 0.67 5.08 0.20 3.05 0.12 SCALE 3:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 4 INCHES MIN MAX 0.340 0.380 0.380 0.405 0.160 0.190 0.020 0.035 0.045 0.055 0.310 0.350 0.100 BSC 0.080 0.110 0.018 0.025 0.090 0.110 0.052 0.072 0.280 0.320 0.197 REF 0.079 REF 0.039 REF 0.575 0.625 0.045 0.055 STYLE 3: PIN 1. ANODE 2. CATHODE 3. ANODE 4. CATHODE U L M W H 3 PL VARIABLE CONFIGURATION ZONE DIM A B C D E F G H J K L M N P R S V MILLIMETERS MIN MAX 8.64 9.65 9.65 10.29 4.06 4.83 0.51 0.89 1.14 1.40 7.87 8.89 2.54 BSC 2.03 2.79 0.46 0.64 2.29 2.79 1.32 1.83 7.11 8.13 5.00 REF 2.00 REF 0.99 REF 14.60 15.88 1.14 1.40 MBRB2060CT, MBR2060CT PACKAGE DIMENSIONS TO−220 CASE 221A−09 ISSUE AF −T− B F SEATING PLANE C T S 4 DIM A B C D F G H J K L N Q R S T U V Z A Q U 1 2 3 H K Z L R V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. J G D N INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.161 0.095 0.105 0.110 0.155 0.014 0.025 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 ----0.080 STYLE 6: PIN 1. 2. 3. 4. MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 4.09 2.42 2.66 2.80 3.93 0.36 0.64 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 ----2.04 ANODE CATHODE ANODE CATHODE SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 http://onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MBRB2060CT/D