MBR2535CTL SWITCHMODEt Power Rectifier Features and Benefits • • • • • • Low Forward Voltage Low Power Loss/High Efficiency High Surge Capacity 150°C Operating Junction Temperature 25 A Total (12.5 A Per Diode Leg) Pb−Free Packages are Available* http://onsemi.com SCHOTTKY BARRIER RECTIFIER 25 AMPERES, 35 VOLTS Applications • Power Supply – Output Rectification • Power Management • Instrumentation 1 2, 4 3 Mechanical Characteristics • • • • • • 4 Case: Epoxy, Molded Epoxy Meets UL 94, V−0 @ 0.125 in Weight: 1.9 Grams (Approximately) Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable Lead Temperatures for Soldering Purposes: 260°C Max. for 10 Seconds ESD Rating: Human Body Model 3B Machine Model C 1 *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. 2 TO−220AB CASE 221A STYLE 6 3 MARKING DIAGRAMS AYWW B2535L AKA AYWW B2535LG AKA A = Assembly Location Y = Year WW = Work Week B2535L = Device Code G = Pb−Free Package AKA = Polarity Designator ORDERING INFORMATION Device MBR2535CTL MBR2535CTLG © Semiconductor Components Industries, LLC, 2008 May, 2008 − Rev. 5 1 Package Shipping TO−220 50 Units/Rail TO−220 (Pb−Free) 50 Units/Rail Publication Order Number: MBR2535CTL/D MBR2535CTL MAXIMUM RATINGS (Per Leg) Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Rating VRRM VRWM VR 35 V Average Rectified Forward Current (TC = 142°C per Diode) (TC = 142°C per Device) IF(AV) Peak Repetitive Forward Current, per Leg (Sq Wave, 20 kHz, TC = 139°C) IFRM 25 A Non−Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions, Halfwave, Single Phase, 60 Hz) IFSM 150 A Peak Repetitive Reverse Surge Current (2.0 ms, 1.0 kHz) IRRM 1.0 A Storage Temperature Range Tstg −65 to +150 °C TJ −65 to +150 °C dv/dt 10,000 V/ms Operating Junction Temperature (Note 1) Voltage Rate of Change (Rated VR) A 12.5 25 Controlled Avalanche Energy Waval 20 mJ Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. The heat generated must be less than the thermal conductivity from Junction−to−Ambient: dPD/dTJ < 1/RqJA. THERMAL CHARACTERISTICS Characteristic Conditions Symbol Max Unit °C/W Maximum Thermal Resistance, Junction−to−Case Min. Pad RqJC 2.0 Maximum Thermal Resistance, Junction−to−Ambient Min. Pad RqJA 75.0 Min Typical Max − − − 0.51 0.41 0.33 0.55 0.47 0.41 − − 0.8 300 5.0 500 ELECTRICAL CHARACTERISTICS Characteristic Symbol Instantaneous Forward Voltage (Note 2) (iF = 25 Amps, Tj = 25°C) (iF = 12.5 Amps, Tj = 25°C) (iF = 12.5 Amps, Tj = 125°C) vF Instantaneous Reverse Current (Note 2) (Rated dc Voltage, Tj = 25°C) (Rated dc Voltage, Tj = 125°C) iR 2. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%. http://onsemi.com 2 Unit V mA 100 IF, INSTANTANEOUS FORWARD CURRENT (A) IF, INSTANTANEOUS FORWARD CURRENT (A) MBR2535CTL 150°C 10 125°C 1.0 25°C 0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) 100 150°C 10 125°C 1.0 0.1 25°C 0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Figure 2. Maximum Forward Voltage IF(AV), AVERAGE FORWARD CURRENT (A) Figure 1. Typical Forward Voltage TJ = 100°C 10 1.0 0.1 IF(AV), AVERAGE FORWARD CURRENT (A) TJ = 125°C TJ = 25°C 0 5.0 10 15 20 25 30 35 dc RqJA = 16°C/W 12 10 8.0 6.0 2.0 0 dc RqJA = 75°C/W No Heatsink 0 16 14 Square Wave 12 10 8.0 6.0 4.0 2.0 0 120 125 130 135 140 145 150 Figure 4. Current Derating, Case, Per Leg Square Wave 4.0 dc 18 Figure 3. Typical Reverse Current, Per Leg 18 14 20 TC, CASE TEMPERATURE (°C) 20 16 22 VR, REVERSE VOLTAGE (V) PF(AV), AVERAGE POWER DISSIPATION (W) IR, REVERSE CURRENT (mA) 1,000 100 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 25 50 Square Wave 75 100 125 150 175 16 14 TJ = 150°C 12 10 Square Wave 8.0 dc 6.0 4.0 2.0 0 0 2.0 4.0 6.0 8.0 10 12 14 16 18 20 22 24 26 TA, AMBIENT TEMPERATURE (°C) IF(AV), AVERAGE FORWARD CURRENT (A) Figure 5. Current Derating, Ambient, Per Leg Figure 6. Forward Power Dissipation http://onsemi.com 3 155 MBR2535CTL PACKAGE DIMENSIONS TO−220 CASE 221A−09 ISSUE AF −T− B F SEATING PLANE C T S 4 DIM A B C D F G H J K L N Q R S T U V Z A Q U 1 2 3 H K Z L R V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. J G D N INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.161 0.095 0.105 0.110 0.155 0.014 0.025 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 ----0.080 STYLE 6: PIN 1. 2. 3. 4. MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 4.09 2.42 2.66 2.80 3.93 0.36 0.64 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 ----2.04 ANODE CATHODE ANODE CATHODE SWITCHMODE is a trademark of Semiconductor Components Industries, LLC (SCILLC). ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 http://onsemi.com 4 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MBR2535CTL/D