MBRB2515L Preferred Device SWITCHMODEt Power Rectifier ORing Function Diode D2PAK Surface Mount Power Package The D2PAK Power Rectifier employs the Schottky Barrier principle in a large metal−to−silicon power diode. State−of−the−art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for use in low voltage, high frequency switching power supplies, free wheeling diodes, and polarity protection diodes. http://onsemi.com SCHOTTKY BARRIER RECTIFIER 25 AMPERES, 15 VOLTS Features • • • • • • • Guardring for Stress Protection Low Forward Voltage 100°C Operating Junction Temperature Epoxy Meets UL 94 V−0 @ 0.125 in Short Heat Sink Tab Manufactured − Not Sheared Similar in Size to the Industry Standard TO−220 Package Pb−Free Packages are Available 1 4 3 4 1 Mechanical Characteristics: • Case: Epoxy, Molded, Epoxy Meets UL 94 V−0 • Weight: 1.7 Grams (Approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal • • • Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Max. for 10 Seconds Device Meets MSL1 Requirements ESD Ratings: Machine Model, C (>400 V) Human Body Model, 3B (>8000 V) 3 D2PAK CASE 418B STYLE 3 MARKING DIAGRAM MAXIMUM RATINGS Symbol Value Unit AY WW Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 15 V B2515LG AKA Average Rectified Forward Current (Rated VR, TC = 90°C) IF(AV) 25 A Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz, TC = 100°C) IFRM 30 A Non−Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) IFSM 150 A Storage Temperature Range Tstg −65 to +150 °C Operating Junction Temperature TJ 100 °C dv/dt 10,000 V/ms Rating Voltage Rate of Change (Rated VR) Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. © Semiconductor Components Industries, LLC, 2005 September, 2005 − Rev. 6 1 A Y WW B2515L G AKA = Assembly Location = Year = Work Week = Device Code = Pb−Free Package = Diode Polarity ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. Preferred devices are recommended choices for future use and best overall value. Publication Order Number: MBRB2515L/D MBRB2515L THERMAL CHARACTERISTICS Characteristic Thermal Resistance, − Junction−to−Case − Junction−to−Ambient (Note 1) 1. When mounted using minimum recommended pad size on FR−4 board. Symbol Value Unit RqJC RqJA 1.0 50 °C/W Symbol Value Unit ELECTRICAL CHARACTERISTICS Characteristic Maximum Instantaneous Forward Voltage (Note 2) (iF = 19 Amps, TJ = 70°C) (iF = 25 Amps, TJ = 70°C) (iF = 25 Amps, TJ = 25°C) vF V 0.38 0.42 0.45 Maximum Instantaneous Reverse Current (Note 2) (Rated dc Voltage, TJ = 70°C) (Rated dc Voltage, TJ = 25°C) 2. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%. IR mA 200 15 ORDERING INFORMATION Package Shipping † D2PAK 50 Units / Rail MBRB2515LG D2PAK (Pb−Free) 50 Units / Rail MBRB2515LT4 D2PAK 800 Units / Tape & Reel D2PAK (Pb−Free) 800 Units / Tape & Reel Device MBRB2515L MBRB2515LT4G 50 30 20 IR , REVERSE LEAKAGE CURRENT (mA) 70°C TJ = 25°C 10 7.0 5.0 3.0 2.0 1.0 0.7 0.5 0.3 0.2 1000 400 200 100 0.1 0 0.1 0.2 0.3 0.4 vF, INSTANTANEOUS VOLTAGE (VOLTS) TJ = 100°C 40 20 10 70°C 4.0 2.0 1.0 25°C 0.4 0.2 0.1 0.04 0.02 0.01 0.5 0 Figure 1. Typical Forward Voltage 40 SQUARE WAVE TJ = 70°C 35 30 p 25 I PK 20 I + 10 5.0 dc AV 15 10 5.0 0 0 2.0 4.0 6.0 8.0 10 12 14 16 VR, REVERSE VOLTAGE (VOLTS) 18 20 Figure 2. Typical Reverse Leakage Current I F(AV) , AVERAGE FORWARD CURRENT (AMPS) PF(AV) , AVERAGE FORWARD POWER DISSIPATION (WATTS) i F, INSTANTANEOUS FORWARD CURRENT (AMPS †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. 5.0 10 15 20 25 30 35 IF(AV), AVERAGE FORWARD CURRENT (AMPS) 40 40 RATED VOLTAGE APPLIED RqJC = 1°C/W 35 30 25 dc 20 SQUARE WAVE 15 10 5.0 0 60 Figure 3. Typical Forward Power Dissipation 65 70 75 80 85 90 TC, CASE TEMPERATURE (°C) Figure 4. Current Derating, Case http://onsemi.com 2 95 100 MBRB2515L PACKAGE DIMENSIONS D2PAK 3 CASE 418B−04 ISSUE J NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 418B−01 THRU 418B−03 OBSOLETE, NEW STANDARD 418B−04. C E V W −B− 4 DIM A B C D E F G H J K L M N P R S V A 1 2 3 S −T− SEATING PLANE K W J G D 3 PL 0.13 (0.005) VARIABLE CONFIGURATION ZONE H M T B M N R M STYLE 3: PIN 1. ANODE 2. CATHODE 3. ANODE 4. CATHODE P U L L L M M F F F VIEW W−W 1 VIEW W−W 2 VIEW W−W 3 SOLDERING FOOTPRINT* 8.38 0.33 1.016 0.04 10.66 0.42 5.08 0.20 3.05 0.12 17.02 0.67 SCALE 3:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 3 INCHES MIN MAX 0.340 0.380 0.380 0.405 0.160 0.190 0.020 0.035 0.045 0.055 0.310 0.350 0.100 BSC 0.080 0.110 0.018 0.025 0.090 0.110 0.052 0.072 0.280 0.320 0.197 REF 0.079 REF 0.039 REF 0.575 0.625 0.045 0.055 MILLIMETERS MIN MAX 8.64 9.65 9.65 10.29 4.06 4.83 0.51 0.89 1.14 1.40 7.87 8.89 2.54 BSC 2.03 2.79 0.46 0.64 2.29 2.79 1.32 1.83 7.11 8.13 5.00 REF 2.00 REF 0.99 REF 14.60 15.88 1.14 1.40 MBRB2515L SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Phone: 81−3−5773−3850 Email: [email protected] http://onsemi.com 4 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. MBRB2515L/D