Freescale Semiconductor Technical Data Document Number: MC100ES6017 Rev 2, 09/2005 3.3 V ECL/PECL Quad Differential Receiver The MC100ES6017 is a 3.3 V ECL/PECL quad differential receiver. Under open input conditions, the D input will be biased at VCC/2 and the D input will be pulled down to VEE. This operation will force the Q output LOW and ensure stability. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01 µF capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open. MC100ES6017 ECL/PECL QUAD DIFFERENTIAL RECEIVER Features • • • • • • High bandwidth output transitions LVPECL operating range: VCC = 3.0 V to 3.6 V Internal input pulldown resistors on D inputs, pullup and pulldown resistors on D inputs 20 lead SOIC package Ambient temperature range -40°C to +85°C 20-lead Pb-free package available VCC Q0 Q0 Q1 Q1 Q2 Q2 Q3 Q3 VEE 20 19 18 17 16 15 14 13 12 11 DW SUFFIX 20-LEAD SOIC PACKAGE CASE 751D-07 EG SUFFIX 20-LEAD SOIC PACKAGE Pb-FREE PACKAGE CASE 751D-07 ORDERING INFORMATION Device 1 VCC 2 D0 3 D0 4 D1 5 D1 6 D2 7 D2 8 D3 9 10 D3 VBB Figure 1. 20-Lead Pinout (Top View) and Logic Diagram Package MC100ES6017DW SO-20 MC100ES6017DWR2 SO-20 MC100ES6017EG SO-20 (Pb-Free) MC100ES6017EGR2 SO-20 (Pb-Free) PIN DESCRIPTION Pin © Freescale Semiconductor, Inc., 2005. All rights reserved. Function Dn, Dn ECL Differential Data Inputs Qn, Qn ECL Differential Data Outputs VBB Reference Voltage Output VCC Positive Supply VEE Negative Supply Table 1. General Specifications Characteristics Value Internal Input Pulldown Resistor 75 kΩ Internal Input Pullup Resistor 75 kΩ ESD Protection Human Body Model Machine Model Charged Device Model > 2000 V > 200 V > 1500 V θJA Thermal Resistance (Junction to Ambient) 0 LFPM, 20 SOIC 500 LFPM, 20 SOIC 90 °C/W 60 °C/W Meets or exceeds JEDEC Spec EIA/JESD78 IC Latchup Test Table 2. Absolute Maximum Ratings(1) Symbol Parameter Conditions Rating Unit 3.9 V VCC + 0.3 VEE - 0.3 V V 50 100 mA mA ± 0.5 mA -40 to +85 °C VSUPPLY Power Supply Voltage difference between VCC & VEE VIN Input Voltage VCC - VEE ≤ 3.6 V IOUT Output Current Continuous Surge IBB VBB Sink/Source TA Operating Temp Range TSTG Storage Temp Range -65 to +150 °C 1. Absolute maximum continuous ratings are those maximum values beyond which damage to the device may occur. Exposure to these conditions or conditions beyond those indicated may adversely affect device reliability. Functional operation at absolute-maximum-rated conditions is not implied. Table 3. DC Characteristics (VCC = 3.0 to 3.6 V; VEE = 0 V or VCC = 0 V; VEE = -3.6 to -3.0 V) -40°C Symbol 0°C to 85°C Typ Max 20 31 Min Typ Max Unit 28 35 mA VCC - 970 (1) Output HIGH Voltage VCC - 1150 VCC - 1020 VCC - 750 mV (1) Output LOW Voltage VCC - 1950 VCC - 1620 VCC - 1250 VCC - 2000 VCC - 1680 VCC - 1300 mV Input HIGH Voltage VCC - 1165 VCC - 880 VCC - 1165 VCC - 880 mV Input LOW Voltage VCC - 1810 VCC - 1475 VCC - 1810 VCC - 1475 mV Output Voltage Reference (IBB = 0.5 mA) VCC - 1440 VCC - 1235 VCC - 1440 VCC - 1235 mV VOH VIH VIL VBB Min Power Supply Current IEE VOL Characteristic (2) VPP Differential Input Votage VCMR Differential Cross Point Voltage IIH Input HIGH Current IIL Input LOW Current VCC - 800 VCC - 1200 0.12 1.3 0.12 1.3 V VEE + 1.3 VCC - 0.9 VEE + 1.3 VCC - 0.9 V 150 µA 150 Dn Dn 0.5 -300 0.5 -300 µA µA 1. Outputs are terminated through a 50Ω resistor to VCC-2 volts. 2. Input swing is centered around VBB. MC100ES6017 2 Advanced Clock Drivers Device Data Freescale Semiconductor Table 4. AC Characteristics (VCC = 3.0 to 3.6 V; VEE = 0 V or VCC = 0 V; VEE = -3.6 to -3.0 V) -40°C Symbol Characteristic Min fmax Maximum Toggle Frequency tPLH, tPHL Propagation Delay to Output tSKEW Data Path Skew(2) (differential) Part-to-Part Skew(2) (differential) Pulse Width Skew (2) (3) (differential) tJITTER Cycle to Cycle Jitter VPP (4) tr / tf Typ 25°C Max Min 1.75 Diff S.E.(1) 310 225 Typ 85°C Max Min 1.75 510 595 310 225 Typ Max 1.75 510 595 310 225 Unit GHz 510 595 ps 50 200 50 50 200 50 50 200 50 ps 1 1 1 ps Input Swing 150 1000 150 1000 150 1000 mV Output Rise/Fall Times (20% - 80%) 50 250 50 250 50 250 ps 1. Single-ended input propagation delay requires tr and tf ≤ 350 ps to meet specified propagation delay. Device will function with larger tr and tf values. 2. Skews are valid across specified voltage range, part-to-part skew is for a given temperature and frequency 3. Pulse width skew is the difference between a tPLH and tPHL propagation delay through a device. 4. VPP (min) is minimum input swing for which AC parameters guaranteed. The device has a DC gain of approximately 40. MC100ES6017 Advanced Clock Drivers Device Data Freescale Semiconductor 3 PACKAGE DIMENSIONS PAGE 1 OF 2 CASE 751D-07 ISSUE J 20-LEAD SOIC PACKAGE MC100ES6017 4 Advanced Clock Drivers Device Data Freescale Semiconductor PACKAGE DIMENSIONS PAGE 2 OF 2 CASE 751D-07 ISSUE J 20-LEAD SOIC PACKAGE MC100ES6017 Advanced Clock Drivers Device Data Freescale Semiconductor 5 How to Reach Us: Home Page: www.freescale.com E-mail: [email protected] USA/Europe or Locations Not Listed: Freescale Semiconductor Technical Information Center, CH370 1300 N. Alma School Road Chandler, Arizona 85224 +1-800-521-6274 or +1-480-768-2130 [email protected] Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7 81829 Muenchen, Germany +44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) [email protected] Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku, Tokyo 153-0064 Japan 0120 191014 or +81 3 5437 9125 [email protected] Asia/Pacific: Freescale Semiconductor Hong Kong Ltd. Technical Information Center 2 Dai King Street Tai Po Industrial Estate Tai Po, N.T., Hong Kong +800 2666 8080 [email protected] For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado 80217 1-800-441-2447 or 303-675-2140 Fax: 303-675-2150 [email protected] MC100ES6017 Rev. 2 09/2005 Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”, must be validated for each customer application by customer’s technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2005. All rights reserved.