MIC-5320 AdvancedTCA® 10GbE CPU Blade with Intel® Xeon® 5500 Series Processor Features NEW One Dual-Core or Quad-Core Intel® Xeon 5500 processor (Nehalem-EP) Intel® 5520 IOH36D / ICH10R server class chipset 6 DDR3 VLP DIMMs up to 48 GB with ECC support Two XAUI ports on Fabric interface Two 1000BASE-T ports on Base interface Three 1000BASE-T front panel ports One mid size AMC slot with SAS/PCIe/RTM/CLK support Onboard serial attached SCSI (SAS) controller with failover support Fully managed, hot swappable RTM Introduction Advantech’s MIC-5320 single-slot AdvancedTCA® processor blade combines computing performance with I/O flexibility in a power efficient design. Supporting Intel’s latest Xeon® processors using the new Nehalem microarchitecture and latest DDR3 technology with a 3 channel memory controller integrated into the CPU, the MIC-5320 outperforms previous generation dual socket designs while providing better thermal characteristics. With built-in next generation processor readiness, there is a smooth upgrade path to future processors supporting more than 4 cores. Using Intel’s latest GbE and 10GbE MAC solutions supporting enhanced offloading techniques and virtualization features, MIC-5320 allows users to deploy the full power of multicore technology. All in all by combining the latest multi core technology, low latency / high speed DDR3 technology, and latest 10GbE technology, MIC-5320 is well suited for high speed data plane applications. Supporting up to 48 GB of memory it can run database in memory applications easily. It is backed up by a 4 channel SAS RAID controller that makes it equally suitable for control plane applications that require disk I/O with RAID and failover support. The mid-size AMC bay supports more than just mass storage AMCs. With support for PCIe x4 gen 2 as well as base fabric channels and telco clock interfaces, it opens up possibilities for high speed I/O interface integration, telco backhaul interface modules and co-processing engines. In addition to utilizing the chipset’s RASUM features, redundant BIOS flashes and onboard USB disks, enhancements to BIOS and firmware to support CMOS backup, and override and HPM.1 upgradeability, make the MIC-5320 a true carrier grade solution. MIC-5320’s overall design and built-in flexibility using FPGA technology, and RTM customization further enlarge the application fields of this product and reduce time-to- market. Advantech’s world class customization services are ready to tune the MIC-5320 to meet customer-specific requirements. Six DDR3 VLP DIMMs Intel 1GbE/10GbE base and fabric interfaces ZD Connectors to RTM 4 channel PCIe SAS controller Mid-size AMC slot Three 10/100/1000BASE-T ports Two USB ports User/Status RS-232 console port LEDs miniUSB console port MIC-5320 Specifications Processor System Bus Memory Zone 2 Front I/O Interface Operating System IPMC Watchdog Timer AMC Miscellaneous Zone 3 (RTM) Physical Characteristics Environment CPU Max. Speed Chipset BIOS QPI Technology Max. Capacity Socket Fabric interface Base interface Serial (COM) Ethernet USB 2.0 Compatibility BMC Controller IPMI Hardware Monitor Supervision Interval Site Interface Power budget E5540 (4C/8T) (not NEBS compliant) or L5518 (4C/8T) or L5508 (2C/4T) Intel Nehalem processor 2.53 GHz Intel IOH36D / ICH10R Dual 16-Mbit BIOS firmware flashes with AMI embedded BIOS 5.86 GT/s Triple channel DDR3 1066 MHz SDRAM (72-bit ECC Un-/ Registered) Configurable up to 48 GB 6 VLP DIMMs i82599 Dual 10GE MAC/PHY supporting two 10Base KX4 ports (XAUI) i82576 PCIe dual GbE MAC/PHY supporting two 10/100/1000 Mbps ports 2 x86 Serial Ports (1 RJ-45 connector, 1 miniUSB connector) 2 10/100/1000BASE-T through PCIe based i82576 MAC/PHY, 1 10/100/1000 Mbps Chipset LAN 2 Type A ports WindRiver PNELE2.0, Linux, PNELE3.0 in preparation Renesas H8S/2166 Compliant with IPMI 1.5 using Pigeon Point System® (PPS) Solution NuvoTon W83795ADG 1 BMC, 1 x86 BIOS POST, OS Boot, Application IPMI compliant 1 mid-size AMC bay SAS/SATA, PCI Express x4, RTM, Clock 30 watts Solid State Disk Two 1GB USB flash disks onboard LED Indicators Storage Real Time Clock RTM Interface Dimensions (W x D) Weight 16 LSI 1064E onboard SAS controller with four ports up to 3 Gb/s Built-in Fully managed and hot swappable 4x SAS, 2x PCIe x1, PCIe x4, 2x SGMII, 3x USB, 2x UART, 2x SATA, SGPIO, AMC ports 14, 17..20 6HP, 294.56 x 322.25 mm (11.60" x 12.69") 2.675kg Operating Non-operating 0 ~ 55° C (32 ~ 131° F) - 40 ~ 70° C (-40 ~ 158° F) 5 to 93%@40°C (non condensing) 95% @ 40° C (non-condensing) 5 G each axis 2.16 Grms, 30 mins each axis 1.5 Grms 2G ETSI EN300019-2-1 Class1.2, EN300019-2-2 Class 2.3, ETSI EN300019-2-3 Class 3.1E Designed to meet GR63-CORE 3.0 R3.0, 3.1 R1.0, AMC.0 R2.0, AMC.1 R2.0, AMC.2, AMC.3, HPM.1 CE mark (EN60950-2001), UL60950-1/CSAC22.2 FCC47 CFR Part15, Class A, CE Mark (EN55022/EN55024/EN300386) Designed to meet GR1089-CORE Temperature Humidity Shock Vibration (5 ~ 500 Hz) Environment Compliance PICMG Safety & EMC Ordering Information Model number MIC-5320A0-S1E MIC-5320A1-S1E MIC-5320A2-S1E Related Products Configuration 10GbE Ethernet fabric interface, 2C/4T CPU 10GbE Ethernet fabric interface, 4C/8T CPU L5518 10GbE Ethernet fabric interface, 4C/8T CPU E5540 Model number MIC-5401 RTM-5101 Configuration SAS HDD Carrier AMC RTM Module for MIC-5320 Online Download www.advantech.com/products