GAMEWELL-FCI MIZ-24

Cooper-Wheelock
MIZ-24
Description
MIZ Series, MIZ-24
Cooper-Wheelock’s MIZ Series Piezoelectric MiniHorns are compact electronic alarm signals that are
Listed under UL 464 for Audible Appliances for use in
public mode Fire Protection Systems. They are ideal
for alarm signaling in individual rooms, apartments,
hotels, motels, offices - where attractive appearance,
dependable performance and economical installation
are prime concerns. MIZ Mini-Horns produce high
sound output (90 dBA at 10 feet [3.048 m] with minimum current draw, 12 milliamperes at 24 volts. All
Mini-Horn models are designed for easy installation
with convenient mounting on standard single-gang
boxes. They are ruggedly constructed of high-impact
thermoplastic and are available in either fire-alarm
red or off white to blend with the room decor.
The MIZ Series Strobe-Horns are designed for maximum performance, reliability and cost-effectiveness
while meeting or exceeding the latest requirements
of NFPA 72 (the National Fire Alarm Code) and ANSI
117.1 (the American National Standard of Accessible
and Usable Buildings and Facilities).
The MIZ Series signals are available for 24 VDC and
may be used with filtered or unfiltered (full-wave rectified) input voltages. MIZ Series Signals have IN/
OUT wiring termnials that accept 12 to 18 AWG wire
at each terminal. Inputs are polarized for use on
supervised circuits.
Ordering Information
Model
Number
Voltage
dBA @
10 Feet
Current
(Amps)
MIZ-24-R
24 VDC
90
0.024
B, C, F, G
MIZ-24-W
24 VDC
90
0.024
B, C, F, G
MIZ-24
Features
• High sound output for enhanced audibility (90 dBA
at 10 feet [3.048 m]).
• Low current draw with low termperature compensation to reduce power consumption and wiring costs.
• 24 VDC models with wide listed voltage range,
filtered DC and FWR.
• Polarized inputs for compatibility with standard
reverse polarity type supervision of circuit wiring by
an alarm panel.
• Low-cost installation via standard electrical boxes.
Attractive flush or surface mounting options.
• No additional trimplate required for flush mounting.
Fast installation with In/Out screw terminals for 12
to 18 AWG wire.
• Compliance with RFI limits in FCC Part 15, Class B
for compatibility with sensitive detection and communication circuits.
Mounting
Options*
Mode code suffixes: R = red plate; W = white plate.
For descriptions of Mounting Options, refer to
Cooper-Wheelock DataSheet S7000.
* Use 3.5” (8.89 cm) deep backbox on all MIZ
products when EMT conduit is used.
An ISO 9000-2000 Company
SIGNALING
FM
A PPR O VE D
E5946
M
EA
A p p ro v e d
0V1A5.AY 1 5 1 - 9 2 -E V o l. II
City of C UL US LISTED
Chicago CS243
R
7135-0785:115
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472 • Tel: (203) 484-7161 • Fax: (203) 484-7118
Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.
©2006 Gamewell-FCI All rights reserved.
www.gamewell-fci.com
9020-0570 Rev. B page 1 of 2
Specifications
General Notes:
1) Mini-Horn models are Listed for indoor use with a
temperature range of 32° F to 120° F (0° C to 49°
C) and maximum humidity of 85% RH.
2) Rated input voltage (either filtered DC or unfiltered full-wave-rectified FWR): 24 VDC MIZ
Series Signals are UL Listed over a voltage range
from 20 VDC to 31 VDC. Check the minimum and
maximum output of the power supply and standby
battery and subtract the voltage drop from the circuit wiring resistance to determine the applied
voltage to the strobes.
Although UL Testing has verified that these products
function even at 80% of their minimum rating and
11% of their maximum rating, Cooper-Wheelock
strongly recommends that the voltage applied to
these products be within their rated input voltage
range. The application of improper voltage may result
in degraded operation or damage to these products.
Contact Cooper-Wheelock for installation instructions
and general information sheets for these products.
These materials contain important information that
should be read prior to specifying or installing these
products, including:
• Total current required by all devices connected to
system primary and secondary power sources.
• Fuse ratings for notification appliance circuits to
handle maximum inrush or peak currents from all
devices on those circuits.
Wiring Diagram (all models):
Warning: Do NOT loop wires; use “In-and-Out” wiring
method.
Mounting Notes
The mounting options reference the maximum number of field wires (conductors) that can enter the
backbox used with each mounting option. If these
limits are exceeded, there may be insufficient space
in the backbox to accommodate the field wires and
stresses from the wires could damage the product.
Although the limits given for each mounting option
comply with the National Electrical Code (NEC).
Cooper-Wheelock recommends the use of the largest backbox option shown and the use of approved
stranded field wires, whenever possible, to provide
additional wiring room for easy installation and minimum stress on the product from wiring.
Architect and Engineer Specifications
The notification appliance shall be a Cooper-Wheelock MIZ Series audible device or approved equivalent. Notification appliance shall be electronic and
use solid state components. Electromechanical alternatives are not approved. Each sound pressure measurement at 10 feet shall be 90 dBA minimum at 24
VDC and 88 dBA minimum at 12 VDC. Operating
voltage is 24 VDC using filtered power or unfiltered
power supply (full-wave-rectified). All models shall
have provisions for standard reverse-polarity type
supervision and IN/OUT field wiring using terminals
that accept 12 to 18 AWG wiring.
• The horn appliances may be installed indoors for
surface or flush mounting. They shall be mounted
on standard electrical hardware, requiring no additional trimplate or adapter.
Cooper-Wheelock products must be used within their published specifications and must be PROPERLY specified,
applied, installed, operated, maintained and operationally
tested in accordance with their installation instructions at
the time of installation and at least twice a year or more
often and in accordance with local, state and federal codes,
regulations and laws. Specification, application, installation,
operation, maintenance and testing must be performed by
qualified personnel for proper operation in accordance with
all of the latest National Fire Protection Association
(NFPA), Underwriters’ Laboratories (UL), National Electrical Code (NEC), Occupational Safety and Health Administration (OSHA), local, state, county, province, district,
federal and other applicable building and fire standards,
guidelines, regulations, laws and codes including, but not
limited to, all appendices and amendments and the
requirements of the local authority having jurisdiction
(AHJ).
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472 • Tel: (203) 484-7161 • Fax: (203) 484-7118
www.gamewell-fci.com
9020-0570 Rev. B page 2 of 2