RCD MLP25-103K

TEMPERATURE SENSITIVE METAL FILM RESISTORS
TC’S FROM +150 TO +7000 PPM
MLP SERIES +155°C MELF
LP SERIES +155°C AXIAL
LPT SERIES +300°C AXIAL
FEATURES
RoHS
Economically priced PTC sensors
Wide resistance range: 1.5Ω - 100K
High stability, excellent linearity
Standard tolerance: ±5% (1%1, 2%, 10% available)
Marked with color bands or alpha-numeric
Resistance value is measured at 25°C (0°C available)
Flat chip available, refer to FLP series
RESISTORSCAPACITORSCOILSDELAY LINES
Linear positive temperature coefficients:
Term.W is
RoHS
compliant
& 260°C
compatible
LP & MLP temperature sensitive resistors feature linear positive
T.C.’s in a wide range of R/T slopes. The series was developed as
a low cost substitute for wirewound sensors. Various temperature
coefficients are obtained by adjusting the film composition. LPT
features platinum film for improved linearity, interchangeability and
+300°C operating temp. Small sizes result in fast response
times, typically 6 seconds for LP/MLP12 & LPT, 9 seconds for
LP/MLP25 (in still air).
L
H
d
D
Inch [mm]
STANDARD TEMPERATURE COEFFICIENTS
(Boldfaced items indicate most popular TC’s)
TC R *
TC R *
(ppm/°C) Tolerance
Standard Resistance Range
LP12 & MLP12 LP25 & MLP25
51Ω - 51K Ω
100Ω - 100K Ω
250
51Ω - 51K Ω
100Ω - 100K Ω
350
51Ω - 51K Ω
100Ω - 100K Ω
450
51Ω - 51K Ω
100Ω - 100K Ω
550
51Ω - 51K Ω
100Ω - 100K Ω
51Ω - 43K Ω
100Ω - 82K Ω
150
650
±50 ppm/°C
±10%
750
51Ω - 43K Ω
100Ω - 82K Ω
850
51Ω - 43K Ω
100Ω - 82K Ω
950
51Ω - 43K Ω
100Ω - 82K Ω
1000
51Ω - 27K Ω
100Ω - 51K Ω
1200
51Ω - 27K Ω
100Ω - 51K Ω
1400
51Ω - 27K Ω
100Ω - 51K Ω
1600
51Ω - 10K Ω
100Ω - 27K Ω
1800
51Ω - 10K Ω
100Ω - 27K Ω
2000
51Ω - 9.1KΩ
100Ω - 22K Ω
51Ω - 9.1KΩ
100Ω - 22K Ω
51Ω - 9.1KΩ
100Ω - 22K Ω
3000
10Ω - 5.1KΩ
20Ω - 10K Ω
3300
10Ω - 5.1KΩ
20Ω - 10K Ω
3600
10Ω - 5.1KΩ
1.5Ω - 10KΩ
4000
10Ω - 3.3KΩ
1.5Ω - 10KΩ
4500
10Ω - 680Ω
10Ω - 10K Ω
5000
10Ω - 680Ω
10Ω - 10K Ω
2200
2500
7000**
±5%
±10%
10Ω - 10K Ω
1% tol avail in limited resis.range
2
LPT resis. may also be specified at 0°C (e.g. “101@0”, “1001@0”)
* T.C. measured at 25°C and 65°C.
** 7000 ppm parts are marked alphanumerically. Operating temp. range is
-65 to +125°C, resis. tol. is 5% or 10%, hermetically sealed silicon
TYPE
LP 12
LP 25
LP T
L ±.031 [.8]
.140 [3.56]
.270 [6.86]
.157 [4]
D ± .02 [.5]
.064 [1.6]
.090 [2.3]
.064 [1.6]
L
D
d ± .003 [.08]
.020 [.5]
.024 [.6]
.018 [.46]
H Min.
1.00 [25.4]
1.18 [30]
1.00 [25.4]
Inch [mm]
W
TYPE
MLP12
MLP25
L±.01 [.25]
.135 [3.4]
.225 [5.7]
t
D±.008 [.2]
.057 [1.45]
.085 [2.15]
W (Min.)
.012 [.3]
.020 [.5]
t (Max.)
.006 [.15]
.008 [.2]
PERFORMANCE
LP12 & MLP12
+150~
+5000ppm/°C
10 ohm to 51K
1/8W
150V
-55°C to +155°C
.77%/°C (W&V)
2.5 mW/°C
1.0% Max.
0.3% Max.
±1% after
1000hrs@125°C
LP25 & MLP25
LP T
+150~
TC (25 - 65°C)
+3500ppm/°C
+5000ppm/°C
Resis. Range
1.5 ohm to 100K 10 to 500 ohm
Wattage @25°C
1/4W
1/16W
Voltage Rating
250V
150V
Operating Temp.
-55°C to +155°C -55°C to +300°C
Derating >25°C
.77%/°C (W&V) .364%/°C (W&V)
Thermal Diss.
4.5mW/°C
2mW/°C
1000-hr Load Life
1.0% Max.
0.5% Max.
1 Year Shelf Life
0.3% Max.
0.2% Max.
High Temp.
±1% after
±0.5% after
Exposure
1000hrs@125°C 1000hrs@150°C
±0.5% 0~100°C ±0.5% 0~100°C ±0.2% 0~100°C
Linearity
±0.5% -50~150°C
±1.5% -50~150°C ±1.5% -50~150°C ±1.5% -50~300°C
P/N DESIGNATION:
LP25 - 101 - J T 151 W
RCD Type (LP12, MLP12, LP25, MLP25,LPT)
Resis.@25°C 2 : If ≥2% tol. use 2 signif.figures &multiplier,
(1R0=1Ω, 100=10Ω, 101=100Ω, 102=1K, 103=10K, etc.);
If ≤1% tol. use 3 signif. digits & multiplier (1R00=1Ω,
10R0=10Ω, 1000=100Ω, 1001=1K, 1002=10K, 1003=100K)
Tolerance: F=1%, G= 2%, J= 5% (std), K=10%
Packaging: B = Bulk, T = Tape & Reel
1
TC: Use 3-digit code (151=150ppm, 102=1000ppm, 452=4500ppm)
Termination: W=Pb-free, Q=SnPb (leave blank if either is acceptable)
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:[email protected]
FA089A Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
84