MOC8030, MOC8050 MOC8030X, MOC8050X NON BASE LEAD OPTICALLY COUPLED ISOLATOR PHOTODARLINGTON OUTPUT APPROVALS z UL recognised, File No. E91231 Package code " SS " 7.0 6.0 'X' SPECIFICATIONAPPROVALS z VDE 0884 in 3 available lead form : - STD - G form - SMD approved to CECC 00802 DESCRIPTION The MOC8030, MOC8050 series of optically coupled isolators consist of an infrared light emitting diode and NPN silicon photodarlington in a standard 6pin dual in line plastic package with the base pin unconnected. FEATURES z Options :10mm lead spread - add G after part no. Surface mount - add SM after part no. Tape&reel - add SMT&R after part no. z High Current Transfer Ratio (500% min) z High BVceo ( 80V ) High Isolation Voltage (5.3kVRMS ,7.5kVPK ) z Basepin unconnected for improved noise immunity in high EMI environment z High sensitivity to low input drive current z Custom electrical selections available APPLICATIONS z Computer terminals z Industrial systems controllers z Measuring instruments z Signal transmission between systems of different potentials and impedances OPTION G OPTION SM Dimensions in mm 2.54 1 2 6 5 3 4 1.2 7.62 6.62 7.62 4.0 3.0 13° Max 0.5 3.0 0.5 3.35 0.26 ABSOLUTEMAXIMUMRATINGS (25°C unless otherwise specified) Storage Temperature -40°C to + 125°C Operating Temperature -25°C to + 100°C Lead Soldering Temperature (1/16 inch (1.6mm) from case for 10 secs) 260°C INPUTDIODE Forward Current Reverse Voltage Power Dissipation 50mA 6V 70mW OUTPUT TRANSISTOR Collector-emitter Voltage BVCEO Emitter-collector Voltage BVECO Collector Current Power Dissipation 80V 6V 80mA 150mW 7.62 SURFACE MOUNT POWER DISSIPATION 0.6 0.1 10.46 9.86 1.25 0.75 0.26 Total Power Dissipation 170mW (derate linearly 3.3mW/°C above 25°C) 10.16 ISOCOM COMPONENTS 2004 LTD Unit 25B, Park View Road West, Park View Industrial Estate, Brenda Road Hartlepool, TS25 1UD England Tel: (01429)863609 Fax : (01429) 863581 e-mail [email protected] http://www.isocom.com 17/7/08 DB92113 ELECTRICAL CHARACTERISTICS ( TA = 25°C Unless otherwise noted ) PARAMETER Input MIN TYP MAX UNITS Forward Voltage (VF) 1.2 Reverse Current (IR) Output V IF = 10mA 10 μA VR = 4V 80 V IC = 1mA (note 2) Emitter-collector Breakdown (BVECO) 6 V IE = 100μA μA VCE = 10V 30 50 mA mA 10mA IF , 1.5V VCE 10mA IF , 1.5V VCE 5300 7500 VRMS VPK (note 1) (note 1) Output Collector Current ( IC )(Note 2) MOC8030 MOC8050 Input to Output Isolation Voltage VISO Note 1 Note 2 1.5 Collector-emitter Breakdown (BVCEO) Collector-emitter Dark Current (ICEO) Coupled TEST CONDITION 1 Input-output Isolation Resistance RISO 1011 Ω VIO = 500V (note 1) Response Time (Rise), tr Response Time (Fall), tf 60 53 μs μs VCE= 2V, IC= 10mA, RL = 100Ω , fig.1 Measured with input leads shorted together and output leads shorted together. Special Selections are available on request. Please consult the factory. FIGURE1 17/7/08 DB92113